Tables tournantes de soudage (26)

Le positionneur de soudure PEMA HPS 3500 & TPS 3500 a été construit en 2021 en Finlande par Pemamek Oy Ltd. Le système se compose de deux machines extrêmement polyvalentes – la tête HPS 3500 et la contre-crosse TPS 3500, avec une charge utile combinée de 7 tonnes. Cette solution est dédiée au levage et à la rotation de longues pièces, ce qui la rend idéale pour la production, entre autres, de tours à vent, de cadres de remorques ou de tubes. Les deux machines peuvent fonctionner ensemble ou indépendamment. Le réglage sans étalonnage de la hauteur assure un ajustement précis des paramètres de travail aux dimensions des pièces. Spécifications techniques du positionneur de soudage PEMA HPS 3500 et TPS 3500 - charge utile maximale : 7 t (tête de pilote 3,5 t + tapage de réponse 3,5 t) - vitesse de rotation : 0,06-1,3 tr/min - plage de réglage de la hauteur de l ...

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 24400 €: 468.48 €: 3000 kg: 150 mm: 150 mm: 360 °: 135 kgm: 400 / 50 V / Hz: 1.1 kW: 1.1 kW: 1200 mm: 700 - 950 mmThe hydraulic positioners are available in standard sizes for load capacities from 1.000 kg to 3.000 kg.The frame is optimally designed for rotation and tilting operations.The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected.For heavy workpieces, the positioners are mounted to the floor.Tilting and rotation are controlled by steel gears.For safety, the positioner is equipped with a reduction gear that holds the table in the desired position.The rotation speed can be adjusted via a potentiometer.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 295 mm, 100 kg

Rotateur de soudage SAF POSISAF 1E Diamètre de l’étagère : Ø 295 mm Capacité maximale : 100 kg Pivot manuel Rotation par variateur de vitesse droite/gauche Equipé d’un mandrin concentrique à 3 mors Ø 200 mm Tension : 220 V mono Dimensions sur support : L 800 x L 450 x H 1200 mm

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 5010 €: 96.69 €: 100 kg: 150 mm: 150 mm: 360 °: 120 kgm: 230 / 50 V / Hz: 0.25 kW: 0.25 kW: 0.1 - 3 U/min: 30 s: 350 mm: M12x6 mm: 690 mmThe positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg.The frame is optimally designed for rotation and tilting operations.The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected.For heavy workpieces, the positioners are mounted on the floor.The tables have radial T-slots that enable quick clamping of the workpieces.Tilting and rotation are controlled by steel gears.For safety, the positioner is equipped with a reduction gear that holds the table in the desired position.Foot pedalCable for signal to welderTouchpanel for following functions:- rotation speed- operating modi (manual, seg ...

Positionneur rotatif à double colonne avec dispositif de levage Lg.Nr. 25138 Spécifications: - Capacité de charge max. par support 4000 kg - Capacité de charge totale max. 7000 kg - Débattement / course 1780 mm - Vitesse de levage 1600 / 2800 mm/min - Mouvement rotatif electr. réglable - Droite + Gauche – Courir - Entraînement 400 V - Besoins en espace demandés. Unité env. L 1500 x H 4000 x P 1500 mm - Espace requis pour l’unité mobile L 1300 x H 4000 x P 1300 mm - Unité de poids env. 4000 kg - Poids de l’unité de course env. 2500 kg

: neu : 2025 : 020156 : prompt, Zwischenverkauf v : Türkei : 6720 €: 129.7 €: 1 : 250 kg: 205 kg: 150 mm: 150 mm: 360 °: 360 kgm: 230 / 50 V / Hz: 0.37 kW: 0.25 kW: 0.1 - 3 U/min: 30 s: 600 mm: M16x6 mm: 550 mm: 1000 mm: 700 mm: 1700 mmThe positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg.The frame is optimally designed for rotation and tilting operations.The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected.For heavy workpieces, the positioners are mounted on the floor.The tables have radial T-slots that enable quick clamping of the workpieces.Tilting and rotation are controlled by steel gears.For safety, the positioner is equipped with a reduction gear that holds the table in the desired position.Foot pedalCable for signal to welderTouchpanel for following f ...

Le positionneur de soudage BODE TT60 est utilisé pour la manipulation d’une pièce d’un poids maximal de 3000 kg pendant le processus de soudage. L’appareil permet de travailler dans la position optimale, contribuant ainsi à une meilleure qualité de soudage. La polyvalence combinée à des solutions de conception parfaitement pensées font que le positionneur de soudage BODE garantit une manipulation sûre et un fonctionnement sans problème pendant de nombreuses années d’utilisation. Caractéristiques techniques de la plaque tournante de soudage BODE TT60 - Poids maximal de la pièce : 3000 kg - Diamètre de la table : 2800 mm

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 11000 €: 211.2 €: 1000 kg: 150 mm: 150 mm: 360 kgm: 230 / 50 V / Hz: 0.55 kW: 0.75 kW: 0.1 - 3 U/min: 60 s: 1200 mm: M20X6 mm: 1000 mmThe positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg.The frame is optimally designed for rotation and tilting operations.The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected.For heavy workpieces, the positioners are mounted on the floor.The tables have radial T-slots that enable quick clamping of the workpieces.Tilting and rotation are controlled by steel gears.For safety, the positioner is equipped with a reduction gear that holds the table in the desired position.Foot pedalCable for signal to welderTouchpanel for following functions:- rotation speed- operating modi (manual, segment ...

Offre 23348 Spécifications: - capacité de charge max. 1500 Kg - Diamètre de la plaque frontale 850 mm - Distance entre le sol et l’axe central de rotation 800 mm - Mouvement rotatif électr. Réglable en continu 0,08 - 1,6 tr/min - Droite - + Gauche - Courir - Transmission du courant de soudage env. 700 A - Entraînement 400 V / 2,2 kW - Encombrement Unité env. L 850 x H 1450 x P 1000 mm - Encombrement : Unité mobile L 850 x H 1450 x P 1000 mm - Poids de l’unité entraînée env. 550 kg - Poids de l’unité mobile env. 400 kg

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 7730 €: 149.19 €: 500 kg: 150 mm: 150 mm: 360 kgm: 230 / 50 V / Hz: 0.37 kW: 0.37 kW: 0.1 - 3 U/min: 45 s: 800 mm: M20X6 mm: 640 mmThe positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg.The frame is optimally designed for rotation and tilting operations.The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected.For heavy workpieces, the positioners are mounted on the floor.The tables have radial T-slots that enable quick clamping of the workpieces.Tilting and rotation are controlled by steel gears.For safety, the positioner is equipped with a reduction gear that holds the table in the desired position.Foot pedalCable for signal to welderTouchpanel for following functions:- rotation speed- operating modi (manual, segmentcyc ...

Key data: 1500 mm, 3500 kg

Numéro de stock : 3871 PLATEAU TOURNANT DE SOUDAGE Fabricant : ESAB PEMA, Type : 3500 F N° de machine : A7001, Année de fabrication : 1987 Spécifications: Taille de la table 1500 mm Ø Poids de la grande pièce 3500 kg Gr. couple de rotation 3100 NM Rotations de la table en continu. 0,01 - 0,8 pr/min Entraînement hydraulique et basculement Longueur : 2000 mm, Hauteur : 1100, Largeur : 1500 mm, Poids : 1200 kg

table diameter: 900 mmtable load: 1.000 kgFrontal Loading Center (A): 150 mmSide Loading Center (B): 150 mmRotating speeds: 0,1 - 1,1 UpMT-slots: 6 x M16 Tilt Angle: 90-180-105 °Tilting Speed: 30 sn min./90°dimensions: 2100x920x1100 mmweight of the machine ca.: 930 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Données techniques: - La force de charge est positionné env. 750 kg - Diamètre du disque planifié 500 mm - diamètre max. pièce 1600 mm - Hauteur de l’assiette tournante en position horizontale environ 750 mm - Assiette tournante à droite, + gauche - Axe rotatif sans fin 360 - Temps de rotation par tour 12,5 sec. - Basculement gauche + droite - Axe pivotant angle de rotation 180 - Temps de rotation pour 180 angle de pivotement 10 sec. - 2 touches doubles pieds pour plateaux rotants + bras pivotant - Hydr. Boulons de serrage pour le serrage de la pièce au centre de l’assiette tournante - serrage / serrage du boulon de serrage 32 mm - Déprimant / déprimant 80 / 48,9 kN - Cylindre de serrage filetage intérieur M 27 x 40 - Commande de positionnement SIEMENS - Utilisation manuelle ou par commande - Env. B 1500 x T 2800 x H 1 ...

table diameter: 500 mmtable load: 300 horizontal kg.table load: 150 vertikal kg.swivelling range: 0 - 90 Gradturning speeds: 0,2 - 2,5 U/minbore: 90,0 mmtable height: ~ 650 mm mmmotor: 230 Voltweight of the machine ca.: 90,0 kg.range L-W-H: 385 x 340 x 375 mmFurnishing:- The table can be tilted and clamped at an angle of 0 ° to 90 °- manual tilting- Start / stop via location-independent foot switch- Direction of rotation can be selected right / left- Adjustable rotation time- The control of the welding machine via control- 350 amp ground connectionScope of delivery:- control (integrated)- foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacité de charge: 6000 kg Dimensions du disque planifié : 1500 x 1500 mm Plage de basculement horizontale jusqu’à - 145 ° Vitesse de rotation : 0 - environ 1 upm C’est électrique. Raccordement : 400 V, env. 5 kW Espace nécessaire : 2800 x 2350 x 3250 mm Poids : 5000 kg

table load: 1000 kgtable diameter: 900 mmturning speeds: 0,12 - 1,2 U/minswivelling range: 0 - 135 Gradspeed: Kipp 0,35 U/minwelding current: 500 Adimensions of the machine ca.: 1475 x 1050 x 900 mmFor heavy industryWhen choosing a turntable, it is essentialTurning and tilting torque must be taken into account. To noteapplies to how far the center of gravity of the workpiece is from theThe faceplate is away or how far the center of gravity isis eccentric from the center. By means of aRotary and tilting tables can be used to optimize workpiecesposition for welding.- Robust construction.- Infinitely variable.- Hand remote control.- HF protected.Furnishing :- 1 control (integrated)- 1 wired remote controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacité de charge maximale avec disque plan horizontal 60 tonnes, charge maximale avec le disque plan vertical 90° pour un centre de gravité d’un mètre 30 tonnes - pour un centre de gravité de 2 mètres 19 tonnes.

Diamètre de la table : - mmCharge de la table : 3000 kgPlage de pivotement : 360 GradPlage de mouvement vertical : 1380 mmVitesse de course : 1900 mm/min : 360 Puissance totale requise : 4 kWPoids de la machine env. : 5400 kgDimensions de la machine env. : 3800 x 3700 x 4200 mm

table load: max. 40 t twith manual operation panel: ja weight of the machine ca.: 22 t: 1918 Year: ca. 1990 Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: Dreh- und kippbar : für Schweißpistole oder : für Plasma condition: nicht geprüft Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 2500 kgWorking height minimal: 350 mmWorking height maximum: 1850 mmmax. torque: 3000 Nm0: 1 U/minadjustment speed: vertikal 560 mm/minvertical adjustment: 1500 mmbaseplate diameter: 600 mmrotation movement: 0,75 kWstroke drive: 1,85 kWheight of the plant: 2505 mmweight: 1160 kgVideo available on our website.: Sideros Engineering Head & Tailstock Positioners are used to weld and assembly long and large weldments in many different application fields. Besides the benefits of ergonomics and safety during welding and assembly applications, the revolutionary feature of Syncrolift is the compactness and the portability of both columns, thanks to their dedicated hydraulic jacks. The result is an extreme flexibility in the factory.Syncrolift features two main axis: Electrical elevation/descent, and Electrical 360° left/right rotation.Due to its special design, the column po ...

weight max. in kg: 1250 kgWorking height minimal: 540 mmWorking height maximum: 1120 mmtable diameter: 800 mmswivelling range: --> 95 Gradmax. torque: 490 Nmtable rotation speed: 2 U/minWorking height from to: 540 - 1120 vertikal mmWorking height from to: 700 - 1280 horiz. mmtotal power requirement: 2,53 kWweight of the machine ca.: 757 kgdimensions of the machine ca.: 1,76 x 1,63 mHydraulic positioner for permanent turning right + left, tilting,Raise and lower.Machine dealer with own stock of 2500 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 800 mmtable load: 2 tswivelling range: --> 95 Gradmax. torque: 1250 Nmtable rotation speed: 2 U/minWorking height from to: 550 - 1300 vertikal mmWorking height from to: 650 - 1400 horiz. mmtotal power requirement: 2,53 kWweight of the machine ca.: 930 kgdimensions of the machine ca.: 1,85 x 1,66 mElectric 400 Volt: Hand control panel: Hydraulic-device: Hydraulic positioner for permanent turning right + left, tilting,Raise and lower.Machine dealer with own stock of 2500 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1300 mmtable load: 7.000 kgFrontal Loading Center (A): 150 mmSide Loading Center (B): 150 mmRotating speeds: 0,1 - 0,9 UpMT-slots: 6 x M24 Tilt Angle: 90-180-100 °Tilting Speed: 30 sn min./90°weight of the machine ca.: 3.050 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 960 mmtable load: 3.500 kgFrontal Loading Center (A): 150 mmSide Loading Center (B): 150 mmRotating speeds: 0,1 - 0,9 UpMT-slots: 6 x M20 Tilt Angle: 70-90-180 °Tilting Speed: 30 sn min./90°weight of the machine ca.: 1.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 715 mmtable load: 500 kgFrontal Loading Center (A): 150 mmSide Loading Center (B): 150 mmRotating speeds: 0,1 - 1 UpMT-slots: 6 x M16 Tilt Angle: 90-180-110 °Tilting Speed: 30 sn min./90°weight of the machine ca.: 675 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.