Pompe d’extrusion Pompe Hobbock LOCTITE - DOSIERTECHNIK 97560 Fördersystem

Conveyor System LOCTITE 97560 - Extrusion Pump
Manufacturer: Henkel AG & Co. KGaA.
The LOCTITE 97560 extrusion pump is a high-pressure pneumatic pump used for the conveying and processing of highly viscous and pasty products directly from 20 l/25kg buckets. The pump consists of an air motor with a pumping mechanism mounted on a pressure piston. In the air motor, compressed air generates an up and down movement of the piston; this movement is transmitted to the material pump piston via a connecting rod; in this way, the highly viscous material is conveyed to a product hose. The scoop piston pump is driven by an air motor. The output pressure of the product is regulated by the control of the engine air pressure.
The product is transported from the pump to the material pressure regulator through an (optional) fluid filter and a reinforced, moisture-impermeable high-pressure hose (length max. 10 m). The pressure regulator lowers the high delivery pressure to the operating pressure required for dosing. In this way, pressure peaks generated by the drum pump are also compensated. The product, which has been throttled to operating pressure, is now conveyed to the progressing cavity pump by a maximum 2 m long high-pressure hose.
Internal NR 640

Areas of application & details:
This system is used to convey highly viscous LOCTITE silicones or TEROSTAT from 20-litre buckets. LOCTITE 97560 conveyor system. Hobbock Follower Plate Extrusion Pump, Scoop Piston Pump, Extrusion Pump, Hobbock Pump, Drum Pump, High Pressure Pneumatic Pump Follower Plate Pump.

Applications & Details:
LOCTITE 97560 Extrusion Pump
The Extrusion Pump is a high-pressure pneumatic pump used for extrusion and transfer of high viscous and paste products. The pump is essentially constituted of an air motor and the pumping group, mounted on a ram. In the air motor, compressed air causes the vertical reciprocating movement of the motor piston; this movement is transmitted through a connecting rod to the material pumping piston ending with a shovel plate allowing to suck very viscous products.
The shovel plate (follower plate) is supplied with a series of gaskets able to protect the product contained in the pail from powder, moisture and drying process caused by the touch with air. The use of the ram enables to drive the sucking unit of the pump during the product intake phase directly into the 20 l pails. The ram can automatically compensate the shovel plate descent during the use of the product. This system allows lifting of the extrusion pump for a quick replacement of the pail when it is empty. The ratio 26:1 means that the outlet pressure of product is 26 times higher than the pump feed air pressure. In order to ensure best product compatibility, the pumping group and sealing balls are made from stainless steel. Follower Plate Pump, Piston Pump 26:1.


seller offer No. resale 169893747