machines à souder machines d'occasion à vendre (1,720)

table length: 400 mmtable width: 400 mmtable load: 250 Kgtable diameter: 400 mmswivelling range: 135 Gradturning speeds: 0,2 - 3,0 stufenlos U/mintotal power requirement: 0,3 kWweight of the machine ca.: 0,115 tdimensions of the machine ca.: 1,2 x 0,8 x 1,5 mWelding turntable with- footswitch- manual tilt/swivel- remote control- infinitely variable speed- machine base frameThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

chucking diameter: 315 mmtable load: 300 Kgswivelling range: Gradturning speeds: 0,1 - 4,0 U/minconnected load frequency: 220 Vbore diameter: 63 mmweight: 0,09 tDimensions (LxWxH): 0,8 x 0,6 x 1,2 mWelding turntable incl.- 315 mm chuck- 3-axis torch holder- Cutting torch- Machine base frameThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine à soudage à onduleur. Adaptée au soudage avec électrodes revêtues. Adaptée à une utilisation dans des environnements à haut risque. Auction-ID: A7-50066-171

La machine à souder à onduleur est utilisée pour le soudage MIG/MAG. La machine à souder utilise un IGBT de haute puissance pour transmettre des fréquences de 50/60 Hz à 20 kHz. Les avantages de la soudeur incluent, entre autres, l’économie d’énergie et la possibilité de correction automatique des pulsations de tension, la formation de faible étincelle, un cycle de travail élevé Auction-ID: A7-50066-286

Tension d’entrée : 230V~50Hz Plage de courant de soudure : 20-330A Tension sans charge : 60V Consommation maximale de courant : 55A Consommation effective de courant : 45A Cycle de travail : 40 % 330A, 100 % 202A Taille de l’électrode : 1,6-4,0 mm Auction-ID: A7-50066-192

Tension d’entrée : 230V~50Hz Plage de courant de soudure : 20-330A Tension sans charge : 60V Consommation maximale de courant : 55A Consommation effective de courant : 45A Cycle de travail : 40 % 330A, 100 % 202A Taille de l’électrode : 1,6-4,0 mm Auction-ID: A7-50066-92

Machine à soudage à onduleur. Adaptée au soudage avec électrodes revêtues. Adaptée à une utilisation dans des environnements à haut risque. Auction-ID: A7-50066-71

Machine à soudage à onduleur. Adaptée au soudage avec électrodes revêtues. Adaptée à une utilisation dans des environnements à haut risque. Auction-ID: A7-50066-271

length: 1050 mmheight: 1450 mmweight of the machine ca.: 175 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 800 mmheight: 650 mmtotal power requirement: 3,7 kWweight of the machine ca.: 75 kgdimensions of the machine ca.: 800 x 330 x 650 mmTechnical SpecificationsContinuously adjustable range [A] 35â270Duty cycle (DC) at Imax. (10 min) [%] 30 (40)Welding current at 100% duty cycle [A] 160Mains connection [V] 3/PE 400Continuous power at 100% duty cycle [kVA] 5.5Protection class IP 21Included accessories: - Hose set- Pressure regulator- Ground cable- Basket coil adapterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 900 mmweight of the machine ca.: 95 kgdimensions of the machine ca.: 900 x 450 x 850 mmTechnical SpecificationsContinuously adjustable range [A] 35â250Duty cycle (DC) at Imax. (10 min) [%] 40Welding current at 100% duty cycle [A] 170Mains connection [V] 3/PE 400Continuous power at 100% duty cycle [kVA] 5.5Protection class IP 21Included: - Hose set- Pressure regulator- Ground cable- Spool adapterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tension d’entrée : 230V~50Hz Plage de courant de soudure : 20-330A Tension sans charge : 60V Consommation maximale de courant : 55A Consommation effective de courant : 45A Cycle de travail : 40 % 330A, 100 % 202A Taille de l’électrode : 1,6-4,0 mm Auction-ID: A7-50066-292

Machine à souder le fil électronique, modèle MIG 400-PL, jamais utilisée Dimensions totales : 1200 x 800 x 1500 mm Poids : 120 kg Auction-ID: A7-50066-305

La machine à souder à onduleur est utilisée pour le soudage MIG/MAG. La machine à souder utilise un IGBT de haute puissance pour transmettre des fréquences de 50/60 Hz à 20 kHz. Les avantages de la soudeur incluent, entre autres, l’économie d’énergie et la possibilité de correction automatique des pulsations de tension, la formation de faible étincelle, un cycle de travail élevé Auction-ID: A7-50066-186

La machine à souder à onduleur est utilisée pour le soudage MIG/MAG. La machine à souder utilise un IGBT de haute puissance pour transmettre des fréquences de 50/60 Hz à 20 kHz. Les avantages de la soudeur incluent, entre autres, l’économie d’énergie et la possibilité de correction automatique des pulsations de tension, la formation de faible étincelle, un cycle de travail élevé Auction-ID: A7-50066-86

Machine à souder le fil électronique, modèle MIG 400-PL, jamais utilisée Dimensions totales : 1200 x 800 x 1500 mm Poids : 120 kg Auction-ID: A7-50066-334

current capacity: 25 kVAnumber of controlled axis: 6 workpiece weight: 10 kgweight of the machine ca.: 1550 kgYear of construction 2020 demonstration machine, as newEasy ARC 01.02 FD-B6 Welbee P500L welding robot stationMIG / MAG / water-cooled / torch RTW5000H / welding robot type FD-B6with welding table 2000x1200mmHole diameter 28 mmThe mobile welding cell for the craft businessSetting range MIG / MAG 20 - 500 ASteplessly adjustable switching levelsDuty cycle at max.current 40 ° C 50%Current at 100% ED 40 ° C 410 AWire feed speed 0 - 22 m / min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 800 mmtable load: 1100 Kgswivelling range: 360 Gradturning speeds: U/minconnected load frequency: 400 Vweight: 3,5 tDimensions (LxWxH): 2,8 x 1,2 x 2,4 mWelding positioner- consisting of a column with RDM 50 slewing ring Typ RDM50- RDM 11 rotary table Typ RDM 11- System without control cabinetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 800 mmtable load: 1100 Kgswivelling range: 360 Gradturning speeds: U/minconnected load frequency: 400 Vweight: 3,5 tDimensions (LxWxH): 2,8 x 1,2 x 2,4 mWelding positioner- consisting of a column with RDM 50 slewing ring Typ RDM50- RDM 11 rotary table Typ RDM 11- System without control cabinetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 15 mmMaximum Chamfer Lengths / Maximum Chamfer HeightsMaximum chamfer length for steel 400 N/mm² 15 mmMaximum chamfer height for steel 400 N/mm² 10.6 mmMaximum chamfer length for steel 600 N/mm² 9 mmMaximum chamfer height for steel 600 N/mm² 6.4 mmMaximum chamfer length for steel 800 N/mm² 6 mmMaximum chamfer height for steel 800 N/mm² 4.2 mmRadiiMinimum radius 55 mmGeneralWorking speed (max.) 2 m/minRated power consumption 2600 WSheet metal thickness 4 mm - 160 mmDimensionsLength 554 mmHeight 361 mmWeightWeight 16.5 kgTranslated with DeepL.com (free version)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 25 mmSheet thickness: max. 25 mmMax. bevel length: 10 mm (for steel with a tensile strength of 400 N/mm²)Bevel angle: 30°Power: 2,000 WVoltage: 220 VThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Rudholzer Type of Machine: Welding machine Year of Manufacture: 2018 Materials Processed: PC + ABS/GF Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3, Width 3, Height 4 (cm or m) - Weight 4000 kg - Voltage 400 Volts - Current 83 Amperes - Power 57.6 (Kw or KVA) - Frequency 60 Hz - Phases 3 - Compressed air 7 (bar or psi) Find more here - .ucymachines/ Contact us at - sales@ucymachines

table length: 2400 mmtable width: 1200 mmtable height: 880 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mmtable width: 1500 mmtable height (lateral area): 200 mmweight: 1549 kgdimensions of the machine ca.: 3000 x 1500 mm SIEGMUND Authorized Dealer - All Items in Stock! SPECIAL OFFER SIEGMUND Retro Welding Table 3000x1500x200, accessories includedSIEGMUND welding table just like 25 years agowith plasma nitriding and modern table legsProduct Description- Table dimensions: 3000x1500x200 mm- High-quality S355J2 N steel with plasma nitriding- Material thickness: approx. 24.5-27 mm- Hole diameter: 28 mm- Holes arranged in a 100x100 mm grid- Corners, edges, and holes chamfered at 45°- Side panel height: 200 mm- Holes in side panels arranged in a diagonal grid- Construction reinforced with ribsPlasma-nitrided version:- Protection against rust, scratches, and weld spatter adhesion- Corrosion-resistant / higher load-bearing capacitySpecifications:- 28-hole pattern / Dimension ...

bore: 22 mmweight: 214 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mmtable width: 1000 mmtable height: 150 mmbore: 22 mmweight: 530 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1500 mmtable width: 1500 mmtable height: 150 mmbore: 22 mmweight: 585 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 16 mmweight: 86 kg4-163400Consisting of:- 10x Professional screw clamp, burnished/nitrided- 4x Professional screw clamp 45°/90°, burnished- 8x Vario Prisma Ø 50 90°/120° with screwed-in collar, nitrided- 30x quick-release bolts without groove, double burnished- 8x universal stop 80 L, nitrided- 10x universal stop 115 L, nitrided- 10x stop and clamping angle 90 X, nitrided- 10x stop and clamping angle 90 L, nitrided- 4x stop and clamping angle 300 G, nitrided- 1x set of stop and clamping angles 250 G with rotating angle, nitrided- 1x set of stop and clamping angles 500 GK, nitrided- 1x tool trolley, powder-coated- 1x accessory setThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.