machines d'ennoblissement textile machines d'occasion à vendre (50)

1 extracteur hydro sans jante fabriqué KRANTZ, type GLEITSCHWINGER 1500 x 600 diamètre intérieur du panier 1.500 mm hauteur intérieure du panier 600 mm

Machine à vapeur Capacité 150 m Largeur 2200 mm

Les données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.

CONTROLS  electronic controls ELECTRICAL SPECIFICATIONS  total power consumption: 140 kW  mains power supply: 145 kVA  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 2540 mm  space requirements -front/back-: 5000 mm  total height: 2840 mm  total weight approx.: 12000 kgLaminating machineMaximum textile width 3200 mmMaximum temperature 240 °CHeating time (at 3 m/min) approx. 2 hoursCooling time (at 6 m/min) approx. 3 hoursMechanical speed 0-40 m/min

FLEISSNER, AB 3 500 mm, avec 6 tambours, 1 400 mm Diameter, construit vers 1985, mais révisé en 2008 et avec de nouveaux moteurs et brûleurs. Jusqu’à 250°C. Avec des brûleurs au gaz naturel 1000/400 kW SIEMENS contrôle S7 à partir de 2008 avec écran tactile Moteurs avec convertisseur de fréquence, 50 m par minute, jusqu’à 250 °C

SUCHY, n° 131/08, unité d’étalonnage, année de construction 11/2008, WOB 3700mm, 2 Rouleaux en acier refroidissables, incluant 2 unités de refroidissement ERS, type SC 5,2V, plage de température +10...+32°C, capacité de refroidissement utile par 6000W, embossage, lissage et compactage différents Matériaux à forte pression de contact uniforme et Constance précise de la température

À vendre est un Veit Tunnel Finisher 8657 avec le transport entrant et sortant Prix de l’action Külsheim 19 500 € De plus, le générateur de vapeur et le compresseur peuvent être peut être demandé

Working width: 2000 mmRoller width: 2200 mmpressure: 50 tPressure line: 230 N / mmNumber of rollers: 3 StückUpper roll: 280 diaRoller covering: Stahl, verchromt Heating - upper roll: Thermoöl Middle roll: NIPCO-Walze , 500 mm diaRoller covering: Polyamidmantel Lower roll: Stahl diadiameter of lower rolls: 280 mmRoller covering: Schreiner-Gravur Clouth speed: max.100 m/minWeight: 26 todimensions of the machine ca.: 6,0 x 8,0 x 3,3 m3-roll calender with 2 steel rolls, upper steel roll smooth - chrome-plated,lower steel roll with carpenter engraving, heating with thermal oil(via heat exchanger),middle roll as NIPCO roll, this can be rotated by 180°,for use in the upper or lower roll nip,infeed with working platform, triple profile spreader holders+ metal detector E&L,outfeed with hydraulic MENZEL Sochor winder,The data for this ad was created with ModulMWS - the software solution of Logo ...

Working widths: 4600 mmRoller width: 4800 mmNumber of rollers: 2 x S-Walze StückSwimming roll - dia: 350 mmRoller covering - soft rubber: 75 Grad shorePressure line: 50 N / mmPressure total: 24 toLiquor trough with guide roll: Capacity of dye tub: ca.130 LiterCloth guiding system for woven goods: geb. Breithalter vor Fuge Hydraulic unit for separately pressure: Drive shaft: ohne Antrieb • Dyeing padder with two Swimming Rolls, horizontally arranged, • with liquor trough with guide roll and displacer,• Machine will be completely overhauled before delivery. We supply with guarantee. (Photo shows a similar machine after overhauling)• New drive can be designed according to case of operation,• extra charges: EUR 10,000.00 to 12,000.00• Guarantee period: 6 monthsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working widths: 4200 mmRoller width: 4400 mmNumber of rollers: 2 x S-Walze StückSwimming roll - dia: 350 mmRoller covering - soft rubber: 75 Grad shorePressure line: 50 N / mmPressure total: 22 toLiquor trough with guide roll: Capacity of dye tub: ca.130 LiterCloth guiding system for woven goods: geb. Breithalter vor Fuge Hydraulic unit for separately pressure: Drive shaft: ohne Antrieb • Dyeing padder with two Swimming Rolls, horizontally arranged, • with liquor trough with guide roll and displacer,• Machine will be completely new. We supply with guarantee. (Photo shows a similar machine after delivery)• New drive can be designed according to case of operation,• extra charges: EUR 22.000• Guarantee period: 7 monthsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roller width: 350 mmroll diameter: 110 mmRoller covering - soft rubber: 70 Grad shorerubber: NBR - Qualität Pressure line: 28 N / mmair pressure: max. 4 barCapacity of dye tub: Becken - 1,3 LiterCapacity of dye tub: Zwickel - 0,3 LiterSpeed driven roll: 0-25 U/minspeed: 1 - 10 m/minvoltage: 230 V / 50 Hzdrive motor: 0,4 kWweight: 130 kgdimensions: 1050 x 800 x 810 mm• 2-Roll-laboratory padder for horizontal and vertical roller-arrangement.• The changing from horizontal to vertical roller arrangement can be effected by easy re-allocation of the upper squeezing roll with the pressure cylinders,• small trough for vertical roller-arrangement, content: 1.3 litres,• with controllable motor drive, direct drive effected of the fixed roll, by means of wheels the pressure roll is driven when the nip is open.The data for this ad was created with ModulMWS - the software solution of Log ...

Working widths: 1800 mmroll surface width: 2000 mmpressure: tNumber of rollers: 2 StückUpper roll: Gravur oder Stahl diadiameter of upper rolls: 210 mmHeating - upper roll: Elektro Lower roll: Gummiert diadiameter of lower rolls: 300 mmRoller covering - soft rubber: 95 Grad shoreClouth speed: m/minrequired power: kWweight: 2 tdimensions of the machine ca.: 3,0 x 1,5 x 1,8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working widths: 4000 mmRoller width: 4200 mmNumber of rollers: 2 StückSupporting roller - dia: 490 mmRoller covering - soft rubber: 75 Grad shoreSwimming roll - dia: 340 mmRoller covering - soft rubber: 75 Grad shorePressure line: 50 N / mmPressure total: 21 toLiquor trough with guide roll: heb + senkbar Cloth guiding system: Leitwalze vor der Fuge Drive side: Links Operting side: Links Compensator: pneum. Entlastung Drive shaft: Durchmesser 70 mm required power: 30 m/min =10 kWHydraulic unit for combined pressure: • 2-Bowl-Finishing-Padder with 1 Swimming roll (S-Roll),• with double-trough for double-dipping• can be used as full-bath-dipping or indirect back swash• machine can be compeletely overhauled before delivery (The picture is showing a scheme of this padder type)• in addition a new frequency drive is possible for the adaption of this machine into a complete plantT ...

Working width: 2800 mmRoller width: 3000 mmNumber of rollers: 2 StückSupporting roller - dia: 340 mmRoller covering - soft rubber: 75 Grad shoreSwimming roll - dia: 270 mmRoller covering - ebonit: 100 Grad shorePressure line: 15 N / mmPressure total: 16 toCloth guiding system for woven fabrics: geb. Breitstreckwalze Liquor trough with guide roll: + Verdrängerkörper Drive side: rechts Operting side: links Drive shaft: dia 80 mm Hydraulic unit for separately pressure: Links-Mitte-Rechts total power requirement: 12 kWweight: 4000 kgrange L-W-H: 3,6 x 2,2 x 2,8 mm• new control system from Küsters - delivered in 2008,• with quick cleaning,• without being overhauled,The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 3400 mmRoller width: 3600 mmNumber of rollers: 2 StückSupporting roller - dia: 340 mmRoller covering - soft rubber: 75 Grad shoreSwimming roll - dia: 270 mmRoller covering - soft rubber: 75 Grad shorePressure line: 50 N / mmPressure total: 18 toClouth guiding system for knitted fabrics: geb. Breitstreckwalze Liquor trough with guide roll: + Verdrängerkörper Drive side: rechts Operting side: links Drive shaft: dia 80 mm Hydraulic unit for separately pressure: aus Edelstahl main drive motor: 15 kWtotal power requirement: 20 kWweight of the machine ca.: 6 trange L-W-H: 4,0 x 2,2 x 1,9 mm• 2-Bowl-Finishing-Padder with Supporting roll and S-Roll• driven expander in front of the squeezing nip, with adjustable guide roll for adaption of the enlacement at the expander roll.• Liquor trough pneumatically lift- and lowerable, with 1 guide roll at trough entrance• 3-Roll ...

Fabricant: MONTI ANTONIO Lamination-Coating Modèle: thermofusible mod. 908 Type: Polaire et mousse LAMINATION & Coating avec COATEM Foam faire pour injecter directement sur le tissu pour le revêtement. Travail widh: 1800 mm Date de fabrication: 2003 (comme neuf avec cylindre de rechange neuf - pièces de rechange thermofusibles) Avec de nouvelles pièces de rechange Modernisation complète en 2016 avec de nouvelles installations électriques et logicielles. description: travailler avec SL1 Pleva weftstraitner aller à 2 lignes Lamination Mousse ou polaire à Tissu

Working width: 2600 mmRoller width: 2800 mmNumber of rollers: 2 StückSupporting roller - dia: 295 mmRoller covering - soft rubber: 75 Grad shoreSwimming roll - dia: 240 mmRoller covering - synthetic PU: 83 Grad shorePressure line: 50 N / mmPressure total: 14 toCloth guiding system for woven fabrics: Breithalter, Leitwalze Drive side: nach Auftrag Operting side: nach Auftrag Drive shaft: dia 80 mm Hydraulic unit for separately pressure: in inox Compensator: mit pneum. Entlastung • 2-Bowl high efficiency squeezer with one Swimming Roll (S-roll),• Machine had been completely refurbished in 2007,• with drive (with GS-Motor and gear, without control) for V = 60 m/min.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 1800 mmRoller width: 2000 mmCapacity appr.: 20 mHousing from: Edelstahl Guide rollers - dia: 127 mmWeight: 850 kgDimensions (LxWxH): 0The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Reconditioned powder scatter coating and laminating line for thermoplastic powders. Working width 2'000 mm. Système de poudre-disperse neuf pour le revêtement et le laminage par des poudres thermoplastiques. Largeur de travail de 2 000 mm.

Reconditioned Hotmelt Slot Nozzle machine for coating and laminating of various substrates. Winding/Unwinding on request. Les buses à fentes à fentes nouvellement obsolètes - installation de revêtement et de laminer. Systèmes d’enroulement et d’enroulement sur demande.