machines à souder machines d'occasion à vendre (1,749)

Key data: 4 Meter, 13 t

Type de machine : Machine de découpe à onduleur plasma Fabriquer Hypertherm Type Powermax 30 AIR N° de série 039.660 Tension de raccordement 1 x 230 Volt Plage de réglage 15 – 30 ampères Cycle de service 20 % ED à 30 ampères Réglage du courant réglable en continu Coupe de tronçonnerie max. pendant une courte période 15 mm à 125 mm/min qualité de coupe max. pendant une courte période 7 mm à 500 mm/min Onduleur de refroidissement grâce au ventilateur intégré Brûleur de refroidissement refroidi à l’air comprimé Conception de systèmes d’assemblage portables Fusible 16 Ampère Accessoires optionnels compresseur intégré Dimensions L x l x H 420 x 195 x 330 mm Poids avec brûleur 13 kg Âge 3 ans État testé en atelier, très bon y compris rapport d’essai UVV Contenu de la livraison Système de découpe plasm ...

Key data: 4 Meter, 13 t

Type de machine : Machine de découpe à onduleur plasma Fabriquer Hypertherm Type Powermax 30 AIR N° de série 033.100 Tension de raccordement 1 x 230 Volt Plage de réglage 15 – 30 ampères Cycle de service 20 % ED à 30 ampères Réglage du courant réglable en continu Coupe de tronçonnerie max. pendant une courte période 15 mm à 125 mm/min qualité de coupe max. pendant une courte période 7 mm à 500 mm/min Onduleur de refroidissement grâce au ventilateur intégré Brûleur de refroidissement refroidi à l’air comprimé Conception de systèmes d’assemblage portables Fusible 16 Ampère Accessoires optionnels compresseur intégré Dimensions L x l x H 420 x 195 x 330 mm Poids avec brûleur 13 kg Âge 4 ans État testé en atelier, très bon y compris rapport d’essai UVV Contenu de la livraison Système de découpe plasm ...

Type de machine : Poste à souder MIG / MAG Fabriquez MERKLE Type RedMIG eco 2800 K conforme à l’éco-conception de l’UE Le règlement n° 2019/1784 Tension de connexion 3 x 400 volts Plage de réglage 30 – 280 ampères Cycle de service 30 % ED à 280 ampères 60 % ED à 210 ampères 100 % ED à 180 ampères Réglage du courant 14 niveaux de commutation Transformateur de refroidissement par ventilateur intégré Brûleur de refroidissement refroidi au gaz Conception d’un système compact mobile Dévidoir à 4 rouleaux DV 26 Fusible 16 Ampère Dimensions L x l x H 800 x 460 x 655 mm Poids 97 kg Âge 12 mois État testé en atelier, très bon, y compris rapport d’essai UVV Contenu de la livraison du système de soudage avec les accessoires suivants : 1 torche de soudage 3 mtr. long 1 câble de terre Réducteu ...

20 identical welding machines are available. Type: cool41 U31, standard: IEC 60974-1, -2, -10 C.L.A, mains voltage: 400V, frequency: 50/60Hz, protection class: IP23, power consumption P min: 0.9kW, cooling capacity P max: 0.35MPa (3.5bar), max. current consumption: 2.5A, length: 539mm, width: 210mm, height: 415mm, weight: 22kg. Control: Comfort 2.0 with intuitive operation via click wheel, pulse spot normal mode continuously adjustable (especially for TIG welding), pulse pause ratio (balance) adjustable for example from 10-90%, Hz and kHz pulses up to approx. 15kHz, ActivArc technology dynamic arc control to ensure constant performance despite distance fluctuations and to prevent electrode sticking, improved root and penetration quality, spotArc Spotmatic functions for spot welding and tacking, 2-stroke and 4-stroke mode depending on torch trigger operation, manual metal arc welding ofte ...

10 identical welding machines are available. Fuse protection: 32A, welding range: 40-350A, open circuit voltage: 18-43V, switch steps: 20, welding current at 100 percent duty cycle (40°C): 260A, length: 900mm, width: 560mm, height: 950mm, weight: 120kg. Standards: EN 60974-1 IEC 60974-1 international standard for arc welding equipment, protection class: IP23, protection against spray water and solid foreign objects smaller than 12mm, suitable for outdoor use, insulation class: H, cooling method: AF air cooling with fan, welding current range: 40A 16V to 350A 31.5V, open circuit voltage U₀: 18-43V, duty cycle at 350A: 50 percent duty cycle 5 minutes welding 5 minutes pause, at 330A: 60 percent duty cycle 6 minutes welding 4 minutes pause, at 260A: 100 percent duty cycle continuous operation possible, mains supply voltage: 3~400V 50Hz three phase, maximum mains current I₁ max: 25A, ef ...

3 identical welding machines are available. Very little used. Standard: EN 60974-1, three phase 3~400V 50Hz. Rated values at X 40°C: 5A 10V, 350A 24V 40 percent, 320A 22.8V 60 percent, 280A 21.2V 100 percent for one operating mode, another operating range 5A 20V with 320A 32.8V 40 percent, 290A 31.6V 60 percent and 260A 30.4V 100 percent, U1 = 400V, protection class IP23. It is an inverter controlled TIG MMA welding power source with max. 350A, digital control and memory functions, pulse function adjustable from approx. 0.5Hz to 2kHz, HF or lift ignition, adjustable parameters such as gas pre flow and post flow, slope up and down, balance and various waveforms sinus square etc., PFC technology for high efficiency and operation on generators, remote control or foot pedal connection, thermal monitoring and fault diagnosis with error codes, optional water cooling unit KG 10. An on-site ins ...

A Rehm Invertig Pro 350 AC DC and a Rehm Invertig Pro 450 DC are available, used and in good condition. 1) Invertig Pro 350 AC DC, standards: IEC 60 974-1 IEC 60 974-2, welding current range TIG: 3-350A, output voltage U₂ at maximum current: approx. 24V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent for TIG at 350A, mains voltage input: three phase 400V 50Hz, protection class: IP23S, protection category: S, setting range: 3-350A for TIG in this AC DC version, duty cycle 100 percent at 40°C 350A for TIG 100 percent duty cycle, input fuse protection: 32A at 3x400V for the 350 AC DC version, length: 520mm, width: 360mm, height: 460mm, weight: 29.5kg for AC DC version. 2) Invertig Pro 450 DC, standard: IEC 60 974-1, welding current range TIG: 3-450A, output voltage U₂ at maximum current: approx. 28V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent at 450A ...

5 identical welding machines are available. Mains voltage: 400V 50/60Hz, fuse: 25A, power consumption: 22kVA, cos phi: 0.8, setting range: 40-400A, working voltage: 16-34V, open circuit voltage: 19-55V, voltage steps: 2x12. Duty cycle at 40°C: 60 percent at 360A 32V, 100 percent at 250A 26.5V. Protection class: IP23, insulation class: H 180°C, cooling type: F. Weight gas cooled: 153kg, water cooled: 161kg. Length: 1040mm, width: 460mm, height: 935mm. Two coarse steps, 12 fine steps, high performance 4 roll wire feeder 140W, feeding speed: 0.5-24m/min, wire diameter: 0.8-1.6mm, 2 choke outputs for adjustment to the welding task. Control MC 15 as a compact easily exchangeable control box. Functions: wire feed speed constant control, wire creep, burn back time, 2 stroke and 4 stroke, wire inching without current and gas, low noise fan thermostat controlled for gas cooled units, thermal ov ...

consisting of: - Laser welding head in aluminum case - Coaxial extension - Gas pressure reducer for welding gas supply - Operating instructions - Aluminum carrying case 5300_2 - WSweld Starter Kit Starter Kit WSweld Consisting of: 3 x Annular gap nozzle 1 x Focusing mirror 1 x Deflecting mirror 1 x ZnSe window Laser welding head TC08 Replacing the cutting head with the WSweld laser welding head TC08 expands a flatbed machine into a laser welding system. Deep penetration and heat conduction welding combined in one optic Active cooling of all optical elements Coaxial welding gas supply for perfect laser weld seams Cross-jet prevents contamination of the optics Active collision detection The WSweld laser welding head TC08 is compatible with the following machine types: TRUMPF TruLaser 3030 classic TRUMPF TruLaser 5030 classic TRUMPF Trumatic L2530 TRUMPF Trumatic L3030 TRUMPF Trumatic L3040 ...

Modèle : BAS 051. Machine automatique de soudage bout à bout par étincelle pour lames de scie à ruban. Serrage pneumatique. Pyromètre de recuit. Barre d’insertion pour le positionnement de la lame. Contrôle automatique de la température de recuit UniOp. Nettoyé et repeint à la machine. Année de fabrication : 2001. Tension primaire nominale : 380 [V AC]. Puissance nominale maximale de soudage : 8 [kVA]. Force de serrage : 20 [kN]. Force de forgeage : 5 [kN]. Gammes de soudage. Lames de scie à ruban pour le bois : 6-50 [mm]. Scie à ruban bimétal : 6-41 [mm]. Couteaux à cerceau : 6-50 [mm]. Scie à ruban en acier inoxydable : 6-30 [mm]. Poids : 600 [kg]. Dimensions (L P H) : 1350 1000 1700 [mm]. Instructions et emballage inclus.

Matériel de soudage d’occasion Comme on le voit sur les images, les données techniques Voir les images. Si vous avez d’autres questions, n’hésitez pas à Le prix est par pièce

Ref.nr. 00886 Nom du système : Machine de soudage de treillis à portique Fabricant Fibro GSA Fabriqué en Allemagne Modèle GAE 516 Année de construction 2008 Plaque: Puissance raccordée 630 kVA Tension primaire 400V Fréquence nominale 50-60 Hz Fusible 800A Spécifications: Tension primaire nominale 400V/ 50 Hz Tension de commande 24 V/DC Nombre de transformateurs 10 pièces Puissance nominale par transformateur à 50 % ED 63 kVA Puissance raccordée à 50 % ED 630 kVA Fusible L1+L2+L3 (Lmax 90m) 800 A Section du câble d’alimentation L1 + L2 + L3 (Lmax 90m) 2x240 mm2 Ligne d’alimentation de la machine PE 1x240mm2 Câble d’alimentation PC 230V 10A 3 x 2,5 mm2 Force de l’électrode 480 N/bar Pression d’air – raccord G 3/4 Pression atmosphérique min. 6 bar Consommation d’air à 80 cycles/min 600 Nl/min Raccordement d’eau de refro ...

Ref.Nr. 00885 Nom du système Machine à souder les treillis CE Fabricant : IDEAL Werk - Lippstadt IDEAL 05 petit Modèle GAE 112 Année de fabrication 2004 Révisé en 2021. Ensemble de diodes et transformateurs remplacés, câbles nettoyés pour une valeur de 32 000 € Activité / Description – soudage par points semi-automatique Puissance nominale à 50 % ED 2x200kVA Puissance raccordée 400kVA Tension primaire 400V Tension en circuit ouvert 7V Fréquence nominale 50-60 Hz Fusible 800 A Fabriqué en Allemagne Spécifications: Tension primaire nominale 400 / 50 V / Hz Tension de commande 24 V/DC Nombre de transformateurs 2 pièces Puissance nominale par transformateur à 50 % ED 200 kVA Puissance raccordée à 50 % ED 400 kVA Fusible L1+L2 800 Amp Fusible L3 63 ampères Section du câble d’alimentation L1 + L2 + L3 (Lmax 90m) 2 x 240 m ...

Puissance laser : 4kW, zone de travail X/Y/Z : 4000mm/2000mm/115mm, épaisseur max. de la tôle acier doux/acier inoxydable/aluminium : 20mm/15mm/10mm, poids max. de la pièce : 1700kg. Dimensions de la machine X/Y/Z : env. 11600mm/5300mm/2200mm, poids : env. 15000kg. Comprend Trumpf Liftmaster. Documentation disponible. Une inspection sur place est possible.

Spécifications: Procédure : 2 étapes Surface du filtre : env. 17 m² Efficacité de séparation : >99 % Classe de séparation des fumées de soudage : W3 Capacité d’aspiration : 1100 m³/h Diamètre du bras d’extraction : 150 mm Longueur du bras d’extraction : 3 m Connexion électrique : 3 x 400 V Puissance du moteur : 1,1 kW Niveau de pression acoustique : 70 dB(A) Dimensions, env. : 785 x 730 x 950 mm Poids, env. : 106 kg Caractéristiques: - Fabriqué en Allemagne - Pour des quantités de fumée/poussière faibles à moyennes - Convient pour une utilisation occasionnelle à fréquente - Changement de filtre pratique par la porte de maintenance - La hotte d’extraction peut être tournée et pivotée à 360 degrés Équipement: - 3 nouveaux filtres principaux de remplacement (prix d’origine environ 330 euros chacun) - 7 nouveaux préfiltres de rem ...

Trajectoire X/Y/Z : 3000mm/1500mm/115mm, puissance laser : 5000W, capacité de coupe acier doux/acier inoxydable/aluminium : 25mm/20mm/12mm, vitesse de déplacement : 200m/min, précision de coupe : 0,1mm. Dimensions de la machine X/Y/Z : 11000mm/4600mm/2400mm, poids : 12000kg, contrôle : Siemens Sinumerik 840D. Comprend des convoyeurs, des têtes de découpe laser avec différentes tailles de lentilles, Liftmaster R et d’autres équipements périphériques. Documentation disponible. Une inspection sur place est possible.

Un système complet de découpe plasma Oerlikon, y compris les équipements périphériques, est disponible. 1) Système de découpe plasma CNC Oxytome 30, année de fabrication : 2008. 2) Source plasma Air Liquide Nertajet HP125, année de fabrication : 2008. 3) Unité de filtration Donaldson Torit DCE DFPRO 8-Cyclo, année de fabrication : 2008, poids : env. 1625kg. 4) Unité de refroidissement Air Liquide Friojet-30, année de fabrication : 2008, capacité frigorifique : 2kW, pression de service max. : 29,5bar, réfrigérant : R407c, poids : 80kg. Documentation disponible. Une inspection sur place est possible.

table diameter: 340 mmtable load: 160 horizontal kg.table load: 100 vertikal kg.swivelling range: 0 - 90 Gradturning speeds: 0,6 - 6,0 U/minbore: 60,0 mmmotor: 230 Voltweight of the machine ca.: 56 kg.range L-W-H: 385 x 340 x 375 mmFurnishing:- The table can be adjusted at an angle of 0 to 90 degrees tilt and jam- Start / stop via a location-independent foot switch.- Direction of rotation can be selected right / left.- Adjustable rotation time- The turntable has a 60 mm hollow shaft- The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter.- The table speed is adjustable from 0.6 - 6 rpm.- The control of the welding machine via the turntable control is possible.- The ground contact transmits 300 A / 100%.- The turntable and the control are separate.- HF protected.- COM 1800 control with lap welding- Operating instructions in GermanFu ...

total power requirement: 230 Volttable diameter: 300 mmtable load: 100 Horizontal kgswivelling range: 0 - 90 Gradturning speeds: 0,2 - 2,0 U/minturning speeds: 1,2 - 12,0 U/minbore: 20,0 mmweight of the machine ca.: 50 kgdimensions of the machine ca.: 480 x 325 x 470 mmFurnishing:- Precise drive unit with face plate, on a stable floor stand.- clockwise / counterclockwise- 2 speed series, stepless- Swivel range from 0 ° - 90 °. Manual tilt- DC gear motor with worm gear, infinitely variable.- diameter of 300 mm. Chrome-plated surface to protect against weld spatter.- The devices control panel is easy to understand and use.- Start / stop via a location-independent foot switch.- The speed and direction of rotation are set on the machine.- HF protected.Scope of delivery:- control (integrated)- foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting range for steel to: 12.0 TS mmcutting range for steel to: 8.0 QS mmcapacity at 100%: 30.0 Amperecutting medium: Druckluft output: von 20 - 40 Ampereoutput: Eingang 4.9 KWvoltage: 230 Vweight: 17,9 kgrange L-W-H: 480 x 210 x 340 mmThe Avalon 40.1 is a light, handy plasma cutting system with highCutting performance and top cutting quality. Their light weight and simplicityHandling makes them the ideal candidate for crafts, workshops andIndustry. Cuts carbon steel, stainless steel, aluminum, copper...Characteristics- IGBT technology- Active PFC technology for high duty cycle and energy efficiency- Manual switch to activate airflow to test air pressure. without having to trigger the burner.- Powerful compact system- Intelligent protection function protects the plasma torch from damage such as incorrect air pressure, missing wearing parts, overloading of the. pilot arcmax. separation  ...

cutting range for steel to: 15.0 TS mmcutting range for steel to: 10.0 QS mmcapacity at 100%: 25.0 Amperecutting medium: Druckluft output: von 20 - 40 Amperevoltage: 230 VAir consumption: 230 l/min.output: Eingang 4.9 KWweight: 8.0 kgrange L-W-H: 505 x 147 x 305 mmThe Avalon 40.1 is a light, handy plasma cutting system with highCutting performance and top cutting quality. Their light weight and simplicityHandling makes them the ideal candidate for crafts, workshops andIndustry. Cuts carbon steel, stainless steel, aluminum, copper...Characteristics- IGBT technology- Active PFC technology for high duty cycle and energy efficiency- Manual switch to activate airflow to test air pressure. without having to trigger the burner.- Powerful compact system- Intelligent protection function protects the plasma torch from damage such as incorrect air pressure, missing wearing parts, overloading of the ...

table length: 3000 mmtable width: 1500 mmtable height: 850 mmside-clamping surface:: 200 (Höhe) mmweight: 1517 kg SIEGMUND authorized dealer - all items available! Product description- high quality steel S355J2 + N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drilling surface 100x100 mm grid- Rounded corners, edges and holes- Height of side wall 200 mm- Distance between holes in side wall 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise structuresThe welding tables are provided with a scale as standard.Plasma nitrided version:- Protection against rust / scratches / weld spatter adhesion- more corrosion-resistant / higher load capacityFurnishing:- 28 hole pattern / dimensions 3000 x 1500 x 200 mm- Plasma nitrided version with scale- incl. 6x base equipment The data for this ad was created with ModulMWS - th ...

table length: 1500 mmtable width: 1000 mmtable height (lateral area): 100 mmweight: 255 kg SIEGMUND authorized dealer - all items available! Product description- Through hardened tool steel X8.7 + plasma nitriding- Material thickness approx. 11.5 - 13 mm- Sidewall made of high quality steel S355J2 + N + plasma nitriding- Hole Ø 16 mm- Holes surface 50x50 mm grid- Rounded corners, edges and holes- Height of side wall 100 mm- Drill holes in the side wall in a diagonal grid- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise structuresThe welding tables are provided with a scale as standard.Plasma nitrided version:- Protection against rust / scratches / weld spatter adhesion- more corrosion-resistant / higher load capacityFurnishing:- 16 hole pattern / dimensions 1500 x 1000 x 100 mm- Extreme plasma nitrided version with scale- Sidewall with diagon ...

table length: 3000 mmtable width: 1500 mmtable height (lateral area): 200 mmweight: 1374 kg SIEGMUND authorized dealer - all items available! Product description- Through hardened tool steel X8.7 + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Sidewall made of high quality steel S355J2 + N + plasma nitriding- Hole Ø 28 mm- Surface holes in a diagonal grid- Rounded corners, edges and holes- Height of side wall 200 mm- Drill holes in the side wall in a diagonal grid- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise structuresThe welding tables are provided with a scale as standard.Plasma nitrided version:- Protection against rust / scratches / weld spatter adhesion- more corrosion-resistant / higher load capacityFurnishing:- 28 hole pattern / dimensions 3000 x 1500 x 200 mm- Extreme plasma nitrided version with scale- with diagonal  ...

table length: 2000 mmtable width: 1000 mmtable height (lateral area): 200 mmweight: 699 kg SIEGMUND authorized dealer - all items available! Product description- Through hardened tool steel X8.7 + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Sidewall made of high quality steel S355J2 + N + plasma nitriding- Hole Ø 28 mm- Surface holes in a diagonal grid- Rounded corners, edges and holes- Height of side wall 200 mm- Drill holes in the side wall in a diagonal grid- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise structuresThe welding tables are provided with a scale as standard.Plasma nitrided version:- Protection against rust / scratches / weld spatter adhesion- more corrosion-resistant / higher load capacityEquipment:- 28 hole pattern / dimensions 2000 x 1000 x 200 mm- Extreme plasma nitrided version with scale- with diagonal gr ...

table length: 2400 mmtable width: 1200 mmtable height (lateral area): 100 mmweight: 499 kg SIEGMUND authorized dealer - all items available! Product description- Through hardened tool steel X8.7 + plasma nitriding- Material thickness approx. 11.5 - 13 mm- Sidewall made of high quality steel S355J2 + N + plasma nitriding- Hole Ø 16 mm- Holes surface 50x50 mm grid- Rounded corners, edges and holes- Height of side wall 100 mm- Drill holes in the side wall in a diagonal grid- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise structures.The welding tables are provided with a scale as standard.Plasma nitrided version:- Protection against rust / scratches / weld spatter adhesion- more corrosion-resistant / higher load capacityEquipment:- 16 hole pattern / dimensions 2400 x 1200 x 100 mm- Extreme plasma nitrided version with scale- Sidewall with diagon ...

table length: 2000 mmtable width: 1000 mmtable height (lateral area): 100 mmweight: 351 kg SIEGMUND authorized dealer - all items available! Product description- Through hardened tool steel X8.7 + plasma nitriding- Material thickness approx. 11.5 - 13 mm- Sidewall made of high quality steel S355J2 + N + plasma nitriding- Hole Ø 16 mm- Holes surface 50x50 mm grid- Rounded corners, edges and holes- Height of side wall 100 mm- Drill holes in the side wall in a diagonal grid- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise structuresThe welding tables are provided with a scale as standard.Plasma nitrided version:- Protection against rust / scratches / weld spatter adhesion- more corrosion-resistant / higher load capacityEquipment:- 16 hole pattern / dimensions 2000 x 1000 x 100 mm- Extreme plasma nitrided version with scale- Sidewall with diagona ...

table length: 3000 mmtable width: 1500 mmtable height (lateral area): 100 mmweight: 753 kg SIEGMUND authorized dealer - all items available! Product description- Through hardened tool steel X8.7 + plasma nitriding- Material thickness approx. 11.5 - 13 mm- Sidewall made of high quality steel S355J2 + N + plasma nitriding- Hole Ø 16 mm- Holes surface 50x50 mm grid- Rounded corners, edges and holes- Height of side wall 100 mm- Drill holes in the side wall in a diagonal grid- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise structuresThe welding tables are provided with a scale as standard.Plasma nitrided version:- Protection against rust / scratches / weld spatter adhesion- more corrosion-resistant / higher load capacityEquipment:- 16 hole pattern / dimensions 3000 x 1500 x 100 mm- Extreme plasma nitrided version with scale- Sidewall with diagona ...

weight max. in kg: 1250 kgturning speeds: 2,0 U/minheight: max. 1.120 mmTorque: Tisch 490 Nmweight: 685 kgThe Siegmund Roto-Positioner is ideal for welding,Assembly and maintenance work. The positioning takes place via a hydraulic oneTurn and tilt function. The Siegmund Roto-Positioner is also includedequipped with a continuously height-adjustable axis.Furnishing:- Hydraulic rotation of the clamping plate- Tilt range up to 95 °- Hydraulic height adjustment and tilt function- including hand controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 3000 kgturning speeds: 1,7 U/minheight: max. 1.620 mmTorque: Tisch 11.750 Nmweight: 1.305 kgThe Siegmund Roto-Positioner is ideal for welding,Assembly and maintenance work. The positioning takes place via a hydraulic oneTurn and tilt function. The Siegmund Roto-Positioner is also includedequipped with a continuously height-adjustable axis.Furnishing:- Hydraulic rotation of the clamping plate- Tilt range up to 95 °- Hydraulic height adjustment and tilt function- including hand controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.