scies bois machines d'occasion à vendre (1,048)

Numéro de série : 7903003416Dimensions de la table : environ 620 x 520 mmDimensions de la lame de scie : 200 x 2 x 32mm Table pivotanteRéférence : Wup - Lot 5 Auction-ID: A7-49056-63

Machine – Orbitalum RA 41 Plus - Dispositif de marque : Orbitalum - Modèle : RA 41 Plus – Machine à découper et à biseauter des tuyaux - La lame de scie est chanfreinée (voir photo), aucune information sur la lame de scie en état ou usure - Année de construction : 2007 - État : utilisé, avec des signes habituels d’usure - Fonction : entièrement fonctionnelle (voir vidéo) - Documentation : disponible - avec l’huile de boîte et de grenouille d’origine du constructeur - Accessoires : Plaque de montage rapide, huile de transmission et plaquettes terminées - Application : Construction industrielle / pipeline / coupe précise, chanfreinage Auction-ID: A1-48702-6002

Auction-ID: A1-49309-158

Auction-ID: A1-49309-172

Équipé de tramway Largeur de coupe : 1350 mm Sécurité Auction-ID: A1-49309-183

Auction-ID: A1-49309-175

Auction-ID: A1-49309-184

Auction-ID: A1-49309-167

La scieuse STB TS350M en aluminium/plastique est en bon état et complète comme montré sur les photos. La machine est immédiatement prête à être utilisée. Équipé d’une lame de scie de 350 mm, d’une lame supplémentaire, d’une pince pneumatique et d’une lubrification par brume. Équipé d’une tête basculante et d’options d’onglet de chaque côté de 15°, 30° et 45°. La scie se serre automatiquement pneumatiquement lorsqu’on tire le bras vers l’avant. Techniquement, optiquement et de manière générale, la machine est en bon état et peut donc être utilisée immédiatement. Auction-ID: A1-48979-56

Puissance : 1 600 W Alimentation : 230–240 V, 50/60 Hz Lame de scie originale : Ø216 mm Alésage de la lame de scie : Ø30 mm Pas de vitesse de charge : Bosch indique actuellement 5 500 tr/min Capacité de coupe à 0° : 70 × 312 mm Capacité de coupe à 45° de mitra : 70 × 225 mm Capacité de coupe à 45° de biseau : 45 × 312 mm Portée de la chambre à onglets : 52° à gauche / 60° à droite Portée de biseau : 47° gauche / 2° droite Poids : 17,3 kg Caractéristiques : fonction de tirage, laser de précision, démarrage en douceur et extraction de poussière en deux points. Auction-ID: A1-47441-117

Sawblade tiltable: 46 °Length of the rolling table: 3000 mmcutting width: 1300 mmMotor output: 5,5 kWCutting height: 204 mmCutting height at 45°: mmSaw blade diameter: 550 mmSpeed: 2000-6000 U/min.weight of the machine ca.: 1300 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Conditions de fonctionnement Auction-ID: A3-46186-16472

Conditions de fonctionnement Auction-ID: A3-46186-16474

Conditions de fonctionnement Auction-ID: A3-46186-16475

Sawblade tiltable: 45 °Length of the rolling table: 3200 mmcutting width: 1350 mmMotor output: 5,5 kWCutting height: ca. 153 mm mmSaw blade diameter: 450 mmSpeed: 3000/4000/5000/6000 U/min.weight of the machine ca.: ca. 1.000 kg: Nein : Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wheel diameter: 600 mmCutting height: 380 mmcutting width: 580 mmMotor output: 2,2 kWTable dimensions: 600 x 540 mmTable tiltable: 45 Gradmachine weight ab.: 270 kg: Ja dimensions of machine: 2.085 x 1.035 x 820 mmcutting speed: 1.350 m/minsawblade width: 6-25 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-49210-292

Auction-ID: A7-49302-8

Scie à tronc Auction-ID: A1-40420-101

Wheel diameter: 510 mmCutting height: 350 mmcutting width: 500 mmMotor output: 3,5 kWTable dimensions: 640 x 500 mmTable tiltable: 0-45 GradDimensions (L/W/H): mmmachine weight ab.: 295 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: min. 200 / max. 500 mmSpeed: 2800 / 4000 / 5500 U/min.weight of the machine ca.: kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Comprend la lame de scie, la lame de scie de rechange et le support Auction-ID: A1-48786-160

saw blade diameter: 350 x Ø 30/40 mmcutting diameter: 135 mmcutting length: 430 mmdimensions of saw-blade: 350x3,0/2,4x40 mmturning speeds: 3800 U/minDust suction hood: 100 mmtotal power requirement: 3,0 kWweight of the machine ca.: 100 kgdimensions of the machine ca.: 1300 x 800 x 1600 mm- Crosscut and miter saws for crosscuts- Miter adjustment on both sides (60° / 45°), with fixed stop- Compound cut on one side up to 45°, with fixed stop- Stable cast iron construction- Precise ball bearing guidance of the tool slide hardened and welded steel shafts- manual saw feed- Saw blade infinitely adjustable in height- socket for opt. suctionCutting data :- Cutting length at 90° = 430 mm- Cutting height at 90° = 135 mm- Cutting length at 45° = 310 mm- Cutting height at 45° = 92 mm Special accessories included:- 1x HM circular saw blade 350 x 3.0/2.4 x 40 mm Z = 108 FTZ neg. for aluminum ...

cutting diameter: 300 mmcapacity 90 degrees: flat: 330 x 260 mmcapacity 90 degrees: square: 260 x 260 mmcapacity 45 degrees: round: 260 mmcapacity 45 degrees: flat: 270 x 200 mmcapacity 60 degrees: round: 180 mmcapacity 60 degrees: flat: 170 x 170 mmheight of material-table: 600 mmPitch min/max: 50.000 mmvice: 335 mm Öffnungband speed: 15 - 100 m/minautomatic feeds: 600 mmdimensions of saw-band: 3650 x 27 x 0,9 mmtotal power requirement: 2,2 kWweight: 1.105 kgrange L-W-H: 3,3 x 2,83 x 2,23 mControl: electro-hydraulic band saw fully automatic, with additional : semi-automatic semi-automatic-dynamic manual .. operationDescription:- robust electro-hydraulic band saw fully automatic (INDUSTRY) MEP - WINDOWS numerical control unit User interface with 7” touch screen display mechanical buttons for the sawing machine’s operating functions guarantees reliable operation, simple and intuitiv ...

saw blade diameter: 520 x Ø 50 mmcutting diameter: 200 mmcutting length: 420 mmCutting height at 45°: 140 mmdimensions of saw-blade: 520x3,6/3,0x50 mmturning speeds: 2800 U/minDust suction hood: 100 mmtotal power requirement: 3,0 kWweight of the machine ca.: 310 kg.range L-W-H: 1400 x 900 x 1650 mm- Crosscut and miter saws for crosscuts- Miter adjustment on both sides (60°/45°), with fixed stops- Shift cut on both sides (60°/45°), with fixed stops- Stable cast iron construction- Precise ball bearing guidance of the tool slide hardened and welded steel shafts- manual saw feed- Saw blade infinitely adjustable in height- socket for opt. suctionFurnishing :- 3.0 kW motor for ALU cuttings- Saw blade can be tilted via handwheel and worm gear (shift cut)- Saw blade diameter 520 mm- Saw blade mounting hole 50 mm- Saw blade speed 2,800 rpm- 400 Volt / 3 kW (S6/40%) motor with brake and aut ...

saw blade diameter: 420 x Ø 40 mmcutting diameter: 170 mmcutting length: 410 mmdimensions of saw-blade: 420x3,2/2,4x40 mmturning speeds: 3500 U/minDust suction hood: 100 mmtotal power requirement: 3,0 kWweight of the machine ca.: 120 kgdimensions of the machine ca.: 1300 x 800 x 1600 mm- Cross-cut and miter saws for cross-cut cuts- Miter adjustment on both sides (60 ° / 45 °), with fixed stop- Shifter cut on both sides 45 °, with fixed stop- Stable cast iron construction- Precise linear bushing guide on the tool slide hardened and ground steel shafts- manual saw feed- Saw blade infinitely adjustable in height- nozzle for opt. SuctionCutting data:- Cutting length at 90 ° = 410 mm- Cutting height at 90 ° = 170 mm- Cutting length at 45 ° = 290 mm- Cutting height at 45 ° = 115 mm Special accessories included:- Adjustment of shifter cut via hand crank, both. adjustable (45 ° / 45 ° ...

Auction-ID: A1-48377-13

cutting width: max. 310 mmCutting height: max. 125 mmSaw blade diameter: 500 mmMotor output: 5,5 kWSpeed: 2.800 U/min.Required air-pressure: 6-8 barWorking height: 900 +/- 20 mmDimensions (L/W/H): 10645x1000x1300 mmSALVAMAC COMBO 500 – The semi-automatic miter sawwith SALVASTOP 100 - electronic length stop/slider-------------------------------------------------- -Pos. 1: Legend 500 under table miter saw-------------------------------------------------- -Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm.When cutting boards that are on top of each other, h max. 100 mm.The structure is made entirely of thick-walled and reinforced full-surfacepainted steel. Solid floor mounting system with flanged steel feetfor the mounting hole.Bimanual safety cut control in ergonomic position.Motor power of the saw motor 5.5 kW.Adjustable cutting speed via a pneumatic controller.Maximum system for  ...

cutting width: max. 310 mmCutting height: max. 125 mmSaw blade diameter: 500 mmMotor output: 5,5 kWSALVAMAC LEGEND 500 – The semi-automatic under-table cross-cut saw-------------------------------------------------- -----------Maximum cutting area: 220x125/ 260x100/ 285x80/ 310x50 mm.When sawing stacked boards h max. 100 mm.The structure is made entirely of thick-walled and reinforced throughoutpainted steel. Solid floor mounting system with flanged steel feetfor the mounting hole.Bimanual safety cutting control in ergonomic position.Engine power of the saw motor 5.5 kW.Adjustable cutting speed via a pneumatic controller.Maximum system for weight balance and longevity. Shock absorbing system.Independent pneumatic adjustment options to adapt to differentTypes of processing.Durable and easily replaceable saw blade adjustment bar.HM circular saw blade, diameter 500 mm, Z=108.Pneumatic upp ...

Auction-ID: A1-48377-11