26 HESS machine à vendre

Number of sanding units: 2 st. sanding width: 190 mm Sanding height max.: 4-150 mm Hess Junior single wood sanding machine -------------------------------- Machine in checking process at the moment! Basic structure: Stable, heavy welded construction made of thick-walled rectangular hollow profiles with additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and airborne dust extraction with integrated blow-off device. grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. All guides as a ball linear set on hardened and polished waves. Permanent precision thanks to dust and dirt protection the ball linear sets. Contact roller and sanding pad in a balanced ratio for sanding belt grain load. The la ...

Number of sanding units: 4 St sanding width: 190 mm Sanding height max.: 4-180 mm weight: 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians -------------------------------------- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geom ...

Working width: 3450 mm Working height: 2000 mm Number of cylinders: 5 St. loading dimensions L x W x H: 3600 x 1200 x 2720 mm Hess Multipress Perforated Plate Press For all sloped, segmental, and round-arch windows and doors. Also for interior work or frame construction. For gluing staircase block joints and much more. Largest working area approx. 3450 x 2000 mm External dimensions approx. 3600 x 1200 x 2720 mm The vertical perforated plate press is constructed of heavy-duty, torsion-free steel. Thanks to its simple, robust, and economical design, it has a long service life. The perforated plate is made of 10 mm sheet steel with a 50 mm hole pattern. The pressure cylinders and abutments are self-locking. 5 plug-in hand hydraulic cylinders on a perforated plate with a built-in pump, 2000 kp pressure relief valve, 140 mm pressure plate width, 80 mm pressure plate depth, 60 mm cylinder stro ...

Number of sanding units: 2 st. sanding width: 190 mm Sanding height max.: 4-180 mm HESS - GLORIA 2 BELT SINGLE WOOD SANDING MACHINE ----------------------------------------------------- Manufacturers description: ----------------------------------------------------- Compact design designed according to modern principles. Quiet and vibration-free operation thanks to rigid, stable machine housing and special insulation. Work safety device in accordance with the EC Machinery Directive with the dust-tested certificate. Offset grinding units with large-dimensioned tension rollers for good heat dissipation and stable sanding belt guidance. Sanding units with forced sanding belt oscillation. 2-point sanding dust extraction directly on the sanding roller. Airborne dust extraction on the large tension rollers. Integrated sanding belt blower for longer service life of the sanding belts. Integrate ...

Working width: 3500 mm Working height: 2550 mm Number of cylinders: 6 St. loading dimensions L x W x H: 4500x950x2900 mm Hess Speedy frame press -------------------------------------- will be checked Insertion dimension / pressing length max. 3,500 mm Insertion dimension / pressing height max. 2,550 mm Sliding carriage for width adjustment locking in 50 mm Double hole grid system Electric height adjustment of the long-stroke cylinders (hydraulic) Insertion height of the abutment plates can be preselected in 4 positions 3 vertical printing cylinders stroke 1000 mm Pressure force per cylinder 2000 kN / 20000 N 3 horizontal printing cylinders stroke 80 mm Pressure force per cylinder 1250 kN / 12500 N Printing plate depth 100 mm width 140 mm Grid for cylinder fixation/rear bearing 50 mm Medium pressure beam with shut-off valve Final pressure switch-off and pressure control Control and press ...

Working width: 3500 mm Working height: 2500 mm # 6913 Hess Quickstep frame press --------------------------------- Sold on behalf of the customer in its current condition Technical data summary (please enquire about any additional accessories included) -------------------------------------- General --------------------------------------- Working width: 3500 mm Working height: 2500 mm Features: -------------------------------------- > hydraulic: yes > Number of vertical press cylinders: 3 > Number of horizontal press cylinders: 2 > Vertical adjustment type: electric (long stroke cylinder) > Horizontal adjustment type: electric > 1 medium pressure bar According to the customer, the control system has been renewed and the hydraulic pump with connections has been renewed (technical information according to the manufacturer - no guarantee!) The data for this ad was created with ModulMWS - t ...

Manufacturer: Hess, Type: Junior, Year: ca1987, Control: L/L, Software: yes, Barcode: 190, Monting of the machine: 4 - 150, Equipment of machine 2: 2, Double sided sanding line: 5 - 25, Steel roller: yes, Steel roller: yes, Belt 1 shoe unit: 5,5, Belt 1 combined unit: 5,5, Band 2 Kombiaggregat Walze/Schuh: 1, Band 2 Innenliegendes Drucklamellenband : yes, Band 2 Schleifbandgeschwindigkeit m/s : 280, Belt 2 pressure segment belt: yes, Belt 2 synchronous and reverse run: yes, Band 3 Kombiaggregat Walze/Schuh: yes, Year :ca1987

Manufacturer: Hess , Type: Centro, Year: 2000, Hydraulical/pneumatical: yes, High / low pressure: yes, Press length mm: 3050, Press height in mm: 2200, Press depth mm: 100, Cylinder vertical: 2, Cylinder horizontally: 2, Vertikaldruckzylinder: 2, Haltezylinder zum Fixieren der Hölzer: yes, Mitteldruckbalken: no, Querdruckeinrichtung: yes, Funk-Handpanel: Handpanell, Elektronische Einzeldruckregelung (zum Verpressen von Kreuzsprossenfenster): yes, Year :2000

Manufacturer: Hess, Type: Kantenpresse, Working length mm: 2500, Working widht mm: 2000, Carriage: yes, Pneumatik: yes, Cylinder: 80, Wight approx. kg: 300,

Manufacturer: Hess, Type: Kantenbügelpresse, Year: ca.1990, Pre-warming of massive edges and heating rod: 2, Working length mm: 4000, Working widht mm: 60, Carriage: yes, Tiltable design: yes, Pneumatik: yes, Cylinder: 8, Wight approx. kg: 300, Year :ca.1990

Manufacturer: Hess, Type: Mobil Kantenbügelpresse, Min.-max. workpiece height in mm: 60, Pre-warming of massive edges and heating rod: yes, Working length mm: 1.100, Working widht mm: 1.100, Carriage: yes, Tiltable design: yes, Cylinder: 2,

Manufacturer: Hess, Type: Speedy Quick Step, Year: 1995, Min.-max. workpiece length in mm: 3500, Min.-max. workpiece height in mm: 2500, Working widht max mm: 600, Hydraulical/pneumatical: hydraulisch, High / low pressure: Hochdruck, Cylinder vertical: 3, Cylinder horizontally: 2, FREE TEXT: Automatisches Verfahren der Balken und Lanhhubzylinder für vertikale Bewegung, Year :1995

Manufacturer: Hess, Bauyeshr : 1997, Hydraulical/pneumatical: hydraulisch, Press length mm: 3800, Press hight mm: 2900, Machine rigging: hand, Wight approx. kg: 4000, Year :1997

pressing area: 3000mm x 1900mm; pressing units vertical: 3; pressing units horizontal: 2; pressing system: elctro - hydraulic; machine length: 3500mm; machine width: 1000mm; machine height: 2600mm; waight: ca. 900kg;

A stationary Hess concrete block step tilting mold machine is available. Production area X/Y: 750mm/1500mm, production height: 300mm, board dimensions X/Y/Z: 1700mm/550mm/300mm, board material: aluminum, number of boards: 290, vibration stations: 2, vibration station type: HFZ 2500, vibration force: 89.5kN, available mold types: block step chamfer/block step Ortenau/deep curb, control system: Siemens PLC. Including transport conveyor with 180° turning device and two lifting devices, lifting ladder, transfer car, lowering ladder, board discharge, board cleaning and board buffer. The compact external vibrators were converted to load vibrators. This is a complete system with peripheral and conveyor units. Documentation vorhanden. An on-site inspection is possible.

Cup hinge drilling machine -Stops: pneumatically controlled with program selection -Drilling pattern: see the pictures -Dimensions: 4000/1100/H1800 mm

Presse Hess à cadre hydraulique Type : HYDRO-LUX Dimension de sertissage approximativement L 3550 m x F 2250 mm Charge connectée 380 V / 50 Hz Pompe hydraulique 2,6 kW Dimensions de la machine Longueur 6600 mm x Largeur 1600 mm x Hauteur 2770 mm Pneumatique de 0 à 8 bars Requête de mesure optoélectronique. Les barbons de fenêtre sont placés dans le canal d’alimentation afin que le capteur photoélectrique puisse mesurer si les faisceaux de pression et les coins de presse doivent être ouverts ou fermés. Si le faisceau lumineux de la sonde atteint les barbons de fenêtre, la machine reçoit l’ordre de monter en largeur et en hauteur jusqu’à atteindre la dimension de travail. Flux de travail : Ajustement automatique des dimensions insertion lâche Procédé de pressage automatique Présentation approximative Retirer Ajustement automatique des dimensi ...

Key data: 190 mm, 2

Meuleuse HESS Machine de meulage double face Type : GLORIA Année de fabrication : 1995 ap. J.-C. Largeur de meulage : 190 mm Épaisseur de meulage 4 – 180 mm Ponçage de la chaussure et brosse par le dessus Poncer la chaussure et la brosse par en dessous Les céramiques oxyd sont sans usure et donc sans entretien Réglage motorisé de la hauteur avec affichage numérique Pièce la plus courte : 300 mm Courroies abrasives oscillantes Buse de décharge de bande de ponçage Transport des pièces via des tapis roulants Largeur de bande ponçable 200 mm x longueur de bande de ponçage 1600 mm Moteur de meulage 2 x 4 kW Vitesse d’avance variable à l’infini de 5 à 25 m/min. Moteur d’alimentation 0,75 kW Réglage de hauteur 0,18 kW Vitesse de ponçage 24 m/s. Hauteur de travail – hauteur de la table 830 mm Buse de raccordement à aspiration diamètre 2 x 160 mm ...

Presse à cadre Hess Type VARIANT N° de machine 2182 Construit en 1979 Presse pneumatique à cadre Espace 3700 mm x Hauteur 2300 mm 4 bars avec cylindres de pression par le haut Arrêt côté gauche 1 barre de pression mobile à partir de la droite avec 2 cylindres de pression Course du cylindre 110 mm Force de compression par cylindre 1100 kp (1kp = 1kg) Raccordement à l’air comprimé max. 15 bar Poids env. 550 kg Dimensions extérieures 4400 mm x 700 mm x H 2800 mm Dimensions de chargement 4400 mm x 600 mm x H 2300 mm + Palette avec faisceau de pression 2800 mm x 800 mm x H env. 700 mm

Number of boring motors: 1 St. boring of corner bearing 1=yes, 0=no: 1 ja_yes boring of olive 1=yes, 0=no: 1 ja_yes 1 HESS fitting drilling station for corner bearings and olives This Hess drilling station for tradesmen offers a lot of drilling technology for little money. A complete station for drilling corner bearings and olives with all the important features, such as 2 clamping cylinders, drilling depth sensing, effective suction, stop systems for corner bearing and olive drilling, drilling head with interchangeable chuck, adjustable drilling feed speed, automatic program sequence. This means technology for perfect work: just one machine with just one drilling unit and just one drilling head for 2 work steps. The system: - Base frame as a support wall for frames and sashes up to 100 mm - Drilling unit positioned in the middle, height manually adjustable via threaded spindle - Drill h ...

Étoile de collage avec plaques chauffantes. Raccordement 30 KW. Quatre surfaces de pressage. Hydraulique, pneumatique. D’autres dates suivront.

Presse à chants Hess Type mobil 3000 N° de machine Tél. 2 2791 1538 Année de fabrication 1991 Longueur de travail 3000 mm Pneumatique Largeur de bande 60 mm Plage de pression 0 – 8 bar 6 cylindres de presse, plaque de pression de 120 mm de diamètre Mobile sur roulettes Version lourde Élément chauffant 0 – 200 °C Dispositif de préchauffage à bord solide Longueur 3200 mm x largeur 850 mm Poids env. 450 kg

Presse à cadre Hess Description technique : - 2 cylindres de pression pneumatiques en longueur - 2 cylindres de pression pneumatiques en largeur - 2 porte-pièces pneumatiques - Bande passante d’alimentation: env. 680 mm - Longueur de la courroie d’alimentation : env. 3 400 mm - Zone de serrage : 680 x 1 400 mm - Panneau de commande Taille: - Longueur : env. 3 400 mm - Largeur : env. 1 700 mm - Hauteur : env. 1 400 mm - Poids: env. 800 kg

Cylindres de presse à ossature Hess aller avec l’air comprimé 3 cylindres verticaux et 2 cylindres horizontaux