128 DOOSAN machine à vendre

control: FANUC 21i-TB Control x-axis: 390 mm z-axis: 780 mm spindle taper: A2-11 number of spindle speeds: 2000rpm engine output: 37 kW weight of the machine ca.: 9000 kg dimensions of the machine ca.: 1905,0 × 2720,0 × 3260,0 m The machine has chucks that can produce gears from 100 to 500 mm. Special chuck is available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 1500 kg serial number: FGA04-1290-00480 drive: Treibgas weight: 2800 kg length in width: 940 mm : ca. 2.060 mm (je nach Mas engine output: ca. 34 kW kW cubic capacity: 1.975 cm³ ccm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tour CNC Type : LYNX 220 C Fabricant : Doosan Année : 2008 Contrôle : Fanuc Heures : 17100 Révision de la broche en 2025 Diamètre maximal de tournage : 320 mm Longueur maximale de rotation : 305 mm Diamètre de rotation au-dessus du lit : 510 mm Diamètre de rotation sur la glissière : 290 mm X : 175 mm Z : 330 mm Vitesse de la broche : 4000 tr/min Passage de la broche : 76 mm Capacité de la barre : 65 mm Tourelle : 12 positions Machine en bon état, pleinement fonctionnelle, sous alimentation Pour en savoir plus, cliquez ici - / Contactez-nous à -

contrôle : FANUC 21i TB Diamètre de rotation : 355 mmLongueur de rotation : 1330 mmc-axe : indexation : 0,001 Vitesses de rotation : -2800 U/mintool coniques : BMT 65 Haudler de tourelle supérieure : 12 Axe X à rotation rapide : 16 m/min-axe de rotation rapide : 24 m/min Taille totale : 4000 x 2000 x 2100 mm Poids de la machine vers : 6700 t Les données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.

x-travel: 1050 mm y-travel: 570 mm z-travel: 510 mm Control: Siemens 828D Main spindle:: turning speed range - main spindle: 12000 min/-1 power capacity - main spindel: 16,5 / 11 kW max. Torque: 141 Nm tool taper: BT 40 distance spindle /table: 150 - 775 mm work table:: table surface area: 1300 x 570 mm max. table load: 1000 kg tool magazin:: number of toolpositions: 40 pos. tool taper: BT 40 max. tool diameter: 80 mm max. tool length: 300 mm max. tool weight: 8,0 kg change-time tool to tool: 1,2 sec change-time chip to chip: 3,2 sec feeds:: rapid traverse ( X / Y / Z ): 36 / 36 / 30 m/min workpiece height max.: 590 mm total power requirement: 40,9 kVA weight of the machine ca.: 6,5 t dimensions of the machine ca.: 2,5 x 3,1 x 2,98 m 3-axis vertical CNC machining center - Siemens 828D CNC control and workshop-oriented programming support Shop Mill - 40-tool tool changer (BT 40) - Bas ...

control: FANUC Series 31i Model 5 turning diameter: 540 mm turning length: 1040 mm c-axis: indexing: 0.001 ° turning speeds: -5000 U/min tool taper: ASA A2-6 Top turret tool hodler:: 12 y-travel: 170 (+/- 85) mm rapid traverse X-axis: 36 / 24 m/min rapid traverse Z-axis: 36 / 26 m/min Overall size: 8000 x 3000 x 3000 mm weight of the machine ca.: 12000 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Heures en photo Pour en savoir plus, cliquez ici - / Contactez-nous à -

x-travel: 2100 mm y-travel: 1500 mm z-travel: 1500 mm Number of pallets: 2 size of pallet: 1250 x 1250 mm dimension of workpiece: 2000 x 1725 (H) mm feeds: 0,1 - 12000 mm/min rapid traverse: 24000 mm/min spindle motor: 26/22 kW spindle turning speed range: 10 - 6000 U/min Tool magazine positions: 60 fach tool taper: BT 50 control: Fanuc 31i-MB workpiece weight: 3000 kg total power requirement: 69 KVA total wight: 29 t dimensions of the machine ca.: 10,5 x 5,8 x 4,1 m - CNC control FANUC 31i-MB 4-Axis (X,Y,Z,B) - 2 pallets 1250mm - chip conveyor - High pressure through spindle coolant (Hydtec) - ATC 60 tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1100 mm y-travel: 650 mm z-travel: 550 mm Control: Fanuc 31i-MB distance spindle nose and table: 150 - 700 mm Main spindle:: turning speed range - main spindle: 10 - 20000 min/-1 power capacity - main spindel: 22 / 11 kW max. Torque: Nm tool taper: BT 40 work table:: table surface area: 1200 x 650 mm max. table load: 800 kg Tool-Presetter:: number of toolpositions: 30 pos. tool taper: BT 40 feeds:: rapid traverse ( X / Y / Z ): 30 m/min feed speeds: 1500 mm/min total power requirement: 48,55 kVA weight of the machine ca.: 10 t dimensions of the machine ca.: 3,65 x 3,30 m CNC Machining Center Vertical - CNC control Fanuc 31i-MB - ATC 30-fold (BT 40) - Chip Conveyor - Tool Measure - Mold Optio n - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

New CoBot Brand: Doosan Robotics Type: H2017 The video shows a DOOSAN H2017 CoBot in cooperation with a CNC machining center VITAP K2 2.0 with automatic package. The Doosan Robotics H2017 Carries loads up to 20kg and works with a reach up to 1700mm. Including robot column, vacuum gripper, commissioning, pre-assembly, interface, training, safety technology and CE certification, the recommended retail price is approx. 65,000? net. The time required for teaching new parts is about one hour - always depending on the complexity of the work steps. The optimal area of application for this CoBot is recurring small batches and series that utilize the robot over several shifts. Have you become curious? Then please feel free to contact us about the topic!

travel -x axis: 1.050 mm travel -y axis: 570 mm travel -z axis: 510 mm control: HEIDENHAIN - TNC620 number of spindle speeds: 12.000 U/min tool taper: BT 40 table dimension (L x W): 1300 x 570 mm numbers of positions in the tool changer: 30 Milling machining centers - vertical | DOOSAN - DNM 5700 equipped with 30-way tool changer, ITC cooling system and chip conveyor. The machine only has 13.600 spindle hours. The machine is in a well-maintained condition and has exclusively worked on Aluminum and Plastics. The machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM5700 | DNM-5700 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1270 mm y-travel: 670 mm z-travel: 625 mm CNC-control: SIEMENS 828 D table-size: 1300 x 670 mm max. table load: 1000 kg spindle taper ISO: SK 40 spindle turning speed range: 12000 U/min feed stepless: 8000 mm/min rapid traverse: 36 / 36 / 30 m/min drive capacity - spindle motor: 18,5 kW tool change unit: 30 Pos. total power requirement: 40 kVA weight of the machine ca.: 8,5 t dimensions of the machine ca.: 3,20 x 2,45 x 2,40 m chip conveyor: 4,10 x 0,65 x 1,50 coolant: 3,60 x 2,20 x 0,80 m - Siemens 828D CNC control - Direct drive spindle: 12,000 rpm - Two-contact clamping system in the BIG-PLUS spindle (SK40 spindle taper) - Oil cooling of the spindle head - Thermal compensation system (software) - Tool magazine: 30 tools - RENISHAW tool and workpiece probe - Internal cooling via the spindle centre: 12 bar - External cooling with air and cooling lubricant - Internal thread spi ...

x-travel: 900 mm y-travel: 550 mm z-travel: 500 mm Control: FANUC 31i-b tool change unit: 30 pos. table-size: 1.000 x 500 mm table weight: 700 Kg spindle taper: HSK - A 63 number of spindle speeds: 20.000 U/min/rpm Spindle power: 22 Kw Working hours: 10.816 h Spindle hours: 2.352 h Internal cooling system: Distance between table and spindle: 150/690 mm chip conveyor: kW weight of the machine ca.: 9 t dimensions of the machine ca.: 2.530 x 2.900 x 3.064 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 730 mm y-travel: 730 mm z-travel: 880 mm Control: FANUC 31i-B spindle turning speed - stepless: 15000 U/min spindle taper: BT 40 Big Plus spindle motor: 18,5 / 30 kW pallet table size: 500 x 500 mm workpiece weight: 500 kg distance spindle center to table: 80 - 810 mm Rapid Travel X / Y / Z-Achse: 60 m/min dimension of workpiece: 800 x 1000 mm total power requirement: 80 kVA weight of the machine ca.: 11,5 t dimensions of the machine ca.: 5,45 x 2,68 x 2,88 m Horizontal CNC machining centre - CNC control FANUC 31i-B - Tool changer 60-fold (BT 40 Big Plus) - 2 pallet changer(pallet 24-M16) - Table / Pallet indexing Full B axis. - Pullstud Nikken PS-806. Maximum torque 229.9/ 206.9/ 147.2/ 119.4N.m. - Coolant/Filtering Unit - Chip Conveyor - Exhauster The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 830 mm swing diameter: 920 mm turning height: 750 mm control: Fanuc 0i-TF travel -x axis: 495 mm travel -z axis: 780 mm turning speed range - spindle: 1940 U/min drive capacity - spindle motor: 37 / 30 kW chucking diameter: 380 mm turret (x-stations): 12 pos rapid traverse X-axis: 20 m/min rapid traverse Z-axis: 20 m/min feed: mm/min spindle diameter in front bearing: 160 mm c-axis: 360° (in 0,001°) workpiece weight: 870 kg total power requirement: 61,78 kVA weight of the machine ca.: 9,5 t dimensions of the machine ca.: 2,1 x 2,7 x 3,6 m - Control unit FANUC 0i-TF - Tool Turret 12-fold - Coolant system - Foot switch - Automatic safety switch Front door & full enclosure - Work area lighting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2021 Doosan Puma GT 2100 Tour CNC Type : Puma GT 2100 Producteur : Doosan Année : 9/2021 Heures : 1008 Entièrement fonctionnel, sous tension. Pour en savoir plus, cliquez ici - / Contactez-nous au -

Nous recherchons tous les modèles d’excavatrices à roues Doosan, Daewoo, Hyundai et Hitachi destinés à l’exportation

Ce robot collaboratif DOOSAN M1013 à 6 axes a été fabriqué en 2021. Il possède une capacité de charge utile de 10 kg et une portée de 1 300 mm, ce qui le rend adapté à diverses applications. La machine comprend une construction stable avec une plaque en aluminium et une table rotative pour une fonctionnalité améliorée. Si vous souhaitez obtenir des capacités d’automatisation de haute qualité, considérez le robot collaboratif DOOSAN M1013 que nous proposons à vendre. Contactez-nous pour plus de détails.

Cette machine de tournage horizontal DOOSAN Puma 2500XLY à 3 axes a été fabriquée en 2008. Il offre des performances robustes pour des opérations de tournage de précision. Si vous souhaitez obtenir des capacités de tournage de haute qualité, pensez à la machine DOOSAN Puma 2500XLY que nous proposons à vendre. Contactez-nous pour plus d’informations.

5460 kg, Power (KVA): 745, Working hours: 122

Ce NHP6300 DOOSAN 4 axes a été fabriqué en 2014. Il présente un impressionnant déplacement de 1 050 mm sur l’axe X, un déplacement de 900 mm sur l’axe Y et un déplacement de 1 000 mm sur l’axe Z. La machine comprend une charge maximale en palettes de 1 500 kg et une capacité d’outil de 40 outils. Si vous souhaitez obtenir des capacités d’usinage de haute qualité, considérez le centre d’usinage horizontal DOOSAN NHP6300 que nous proposons à vendre. Contactez-nous pour plus de détails.

5560 kg, Puissance (KVA) : 745, Heures de travail : 88

Engine Brand: DOOSAN, Condition: CORE, Engine Cooling Type: Exchanger (on engine) , Engine Color: Green , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: Core , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 230 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/doosan-gv158ti-used/731, , = More information =, , Type: Engine, Type of fuel: LPG, Type number: GV158TI; Transport weight [kg]: 1255

Engine Brand: DAEWOO, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Working Hours: 811 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 40 Kw, Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 50 , Generator Hz: 60 , Generator Volts: 240 , Generator Amps: 120.2 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/daewoo-daewoo-po34ti-generator -50-kva-used/22423, , = More information =, , Empty weight: 2.000 kg, Width: 42 cm, Type number: DAEWOO PO34TI GENERATOR 50 KVA

DOOSAN VCF 850 LSR II est un centre d’usinage vertical polyvalent, adapté à une large gamme de Applications. Heures de travail 1993 (comme neuves)

This 8-axis DOOSAN PUMA TT 1800 SY was manufactured in 2012. It features a maximum turning diameter of 230 mm and a maximum workpiece length of 700 mm. The machine is equipped with two spindles and two turrets, providing enhanced machining capabilities. If you are looking to get high-quality turning and milling capabilities, consider the DOOSAN PUMA TT 1800 SY turn-mill centre we have for sale. Contact us for further details.

DOOSAN MX2100ST turning center, year 2022, equipped with FANUC 31i-B5 control. This multi-tasking lathe offers X1/Z1 travels of 565/1,050 mm, Y-axis ±85 mm, and B-axis indexing. Main and counter spindle each deliver 22/18.5 kW at 5,000 rpm with A2-6 nose and 8 chuck; 76 mm spindle bore accommodates bar stock up to ø65 mm. BMT55P turret with 12 driven tool positions (5,000 rpm) plus 80-station Capto C6 ATC with 12,000 rpm milling spindle (18.5/15/11 kW) and 2.0 s tool change. Single Swiss owner; delivered complete with LNS Sprint 565 S2 bar feeder (3.2 m, ø3â€34 mm), 55-bar high-pressure coolant to milling spindle, electric tool-measuring arm, parts catcher, oil-mist extraction and HAINBUCH TOPlus/Mando workholding.

CONTROLS   CNC controls FANUC 31I MODEL A BASIC FUNCTIONS   number of spindles: 2   number of turrets: 2   live positions: yes   number of c-axes: 2   number of y-axes: 1 WORKING RANGE TURNING   turning diameter (max): 230 mm   bar diameter (max): 65 mm   worpiece length max.: 700 mm MAIN SPINDLE   spindle revolutions (min): 50 /min   spindle revolutions (max): 5000 /min   spindle bore diameter: 65 mm   c-axis: yes COUNTER SPINDLE   spindle revolutions (min): 50 /min   spindle revolutions (max): 6000 /min   c-axis: yes X/Z SLIDE   tool fixture: Turret ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 2800 mm   space requirements -front/back-: 1630 mm   total height: 2200 mm   total weight approx.: 9000 kg ATTACHMENTS (TURNING)   chip conveyor: yes   coola ...

La machine est en bon état technique ; les essais sont possibles sur préarrangement. Système de contrôle Fanuc 0i-TD, durée de fonctionnement : 5 876 heures.

La machine est en bon état technique et disponible pour des essais préalablement. Elle dispose d’un système de contrôle FANUC i, d’une construction en fonte, de guides linéaires, de courses d’axe X/Y/Z de 1270/670/625 mm, d’une table de 1300 x 670 mm avec fentes en T, d’une capacité de charge de 1000 kg et d’un démonteur d’outils à 30 positions. Les accessoires étendus comprenaient : 4e axe (table rotative), étau hydraulique, sondes pour outils et pièces RENISHAW, écumeur d’huile, feu de signalisation 3 couleurs, convoyeur à puces à bande, collecteur de brume Filtermist 6002, porte-outils, etc.