Rectifieuses à surface cylindrique extérieure (34)

Veuillez demander des données techniques Nous n’avons pas utilisé cette machine car le programme de production a été reporté Très bon état, peut être vu sous alimentation

grinding diameter: 750 mmgrinding length: 5400 mmcentre height: 375 mmmax. workpiece diameter: 750 mmworkpiece weight: 10000 kgtable - swivable +/-: - °grinding wheel size: 750/650 x 75 x 305 mmgrinding wheel turining speeds: 750 U/minturning speed range - workpiece: 14,5 - 86 U/minmain drive motor: 15 kWworkpiece drive: 7,5 kWfeeds - fine adjustment: 0,00635 - 0,0508 mm/mintotal power requirement: - kWweight of the machine ca.: 27 tdimensions of the machine ca.: 13,5 x 3,4 mRefurbished 2023 and equipped with:- DRO- Table swivable- 9 x steadies- Coolant/Filtration TankMachine has had over 85000,-€ of retrofit work in 2023 including:-- replacement of air bearing liners-- 7 x steadies fully overhauled-- Overhaul of top table & centre heights of workhead & tailstock-- New electrical wiring & cabinetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

STUDER S30-1 Meuleuse ronde extérieure Meuleuse CNC NC Suisse Meuleuse Année de construction : 2007 Largeur centrale : 650 mm Valeur des caractéristiques Largeur centrale : 650 mm Hauteur de pointe : 125 mm Diamètre de meulage maximal : 250 mm Poids maximal de la pièce entre les pointes : 130 kg Déplacement X 255 mm Déplacement en Z 700 mm Plage de pivots de table ±10 Alimentation express X 60 mm Alimentation de travail X 0,012–6 mm/min Vitesse de l’axe Z 50–5 000 mm/min Petit débattement automatique de table : 1,5 mm Table de précision de retournement 0,02 mm Porte-broche de meulage 63 mm Meule standard 400 × 63 × 127 mm Meule optionnelle 500 × 63 × 203,2 mm Vitesse circonférence de meulage : 35 ou 50 m/s Moteur de broche à meulage 5,5 kW, en option 7,5 kW Broche de pièce MT5, 30–1 000 tr/min (hydrodynamique) ou 10–600 tr/min (roulem ...

grinding diameter: 715 mmgrinding length: 2000 mmcentre height: 360 mmcontrol: Siemens 840 D centre distance: 2000 mmmax. workpiece weight between centers: 650 kgGrinding spindle:: Spindlespeed: 450 min/-1driving power - grinding spindle: 7,5 kWtaper: 1:5 tool taper: mmfeed speeds: 0,01 - 15.000 mm/mintravel -x axis: 500 mmtravel -z axis: 2700 mm: 280 °grinding speed: 15 m/mintotal power requirement: 75 kWweight of the machine ca.: 14,5 tdimensions of the machine ca.: 5 x 2,4 mExternal cylindrical grinding machinemodernised in 2022-- Siemens 840D / electrical system-- Ball screws on the X and Z axes replaced-- B axis repaired and encoder replaced.-- Hydrostatic system replaced.Equipped with:- Siemens 840D PowerLine CNC control (X, Z, C, B axes)- Marposs measuring system- BalaDyne system- Tailstock- Band filter systemThe data for this ad was created with ModulMWS - the software solutio ...

GÉNÉRALITÉS N° de projet : 905670 Quantité : 1 pcs. Fabricant : TACCHELLA Type : Elektra 1018 MPC Contrôle : MPC Année de fabrication : 1999 Condition : Machine d’occasion Couches env. : moins de 1 couche DESCRIPTION RECTIFICATION CYLINDRIQUE Diamètre de meulage max. 350 mm Longueur de meulage max. 1000 mm Hauteur centrale 180 mm Largeur centrale 1000 mm UNITÉ DE BROCHE DE RECTIFICATION Débattement en X/Z 350/1180 mm Vitesse de déplacement rapide max. en X/Z 10/10 m/min La poupée de meulage peut être pivotée manuellement Broche de meulage entraînée par courroie pour meule externe Droite avec max. diamètre x largeur x alésage 400x50x127 mm Gauche avec max. diamètre x largeur x alésage 450x80x203 mm Vitesse circonférentielle max. 35 m/s2 Puissance max. à ED 10-40/100% 7,5 kW Montage MK5/ASA4 POUPÉE MOBILE La poupée mob ...

WORKING RANGE CYLINDRICAL GRINDING  swing diameter (max): 515 mm  workpiece weight between centers (max): 500 kg  workpiece weight flying (max): 120 kgWORKING RANGE EXTERNAL GRINDING  grinding diameter (max): 515 mm  grinding length: 1500 mmTABLE -CYLINDRICAL GRINDING-  tilting range (B-direction) min: 8.3 °  rotating range B-axis up to: -4 °  longitudinal travel: 1680 mmWORKPIECE SPINDLESTOCK  spindle revolutions (min): 14 /min  spindle revolutions (max): 114 /min  number of gears: 2   drive power: 1.5 kW  tool fixture: MK 6 TAILSTOCK  sleeve stroke: 40 mm  taper: MK 5 SPINDLESTOCK GRINDING SPINDLE  tilting range (B-direction) min: -10 °  rotating range B-axis up to: 10 °  drive power: 15 kWGRINDING TOOL  type of grinding tool: wheel   diameter (max): 630 mm  borehole: diameter: 203.2 mm  width: 125 mmDIMENSIONS / WEIGHTS  space requirem ...

rectifieuse cylindrique externe CNC, marque Studer, type S40-4, Bi 1987, Des documents sont disponibles. Le prix est net

grinding diameter: mmgrinding length: mmcentre height: mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rectifieuses cylindriques externes sans centre Herminghausen SR 40-3 Machine A été amélioré et reconstruit par la société Ebert. Ainsi désignation de type CL 43. Prix d’origine 299.000, - €. Tension de fonctionnement: 400 volts, consommation électrique: 22 kW, diamètre de la pièce 2 - 130 mm, plus grande longueur de meulage pour le broyage direct 250 mm, diamètre de la meule min/max 400/600 mm, alésage de la meule 604,8 mm, diamètre de la roue de commande min/max 220/300 mm, alésage de la roue de commande 152,4 mm, vitesse circonférentielle de la meule 40 m/s, vitesse de la broche de commande réglable à l’infini 0 - 200 tr/min, commande Siemens S7, unité d’alimentation en lubrifiant de refroidissement, poids de la machine env. 6000 Antécédents médicaux Sauf erreurs !

grinding diameter: 250 mmgrinding length: 1000 mmcentre height: 125 mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

! ENTREZ DANS LE MONDE + ! TSCHUDIN HTG 310+ conventionnel avec packs d’innovation et de protection

grinding diameter: ca. 250 mmgrinding length: 200 mmcentre height: 85 mmweight of the machine ca.: 2,5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Avec des anneaux de distance assortis. Photos. Livraison selon la photo 1.

grinding diameter: 600 mmgrinding length: 2000 mmcentre height: 320 mmworkpiece weight: 1200 kgworkpiece weight in steadies max.: 5000 kggrinding wheel size: 760 x 304,8 x 75 mmgrinding wheel turining speeds: 500 - 1400 U/minturning speed range - workpiece: 5 - 150 U/minmain drive motor: 22 kWworkpiece drive: 12 kWControl: Fanuc 0i Mate-MD total power requirement: 42 kWweight of the machine ca.: ca 10 tdimensions of the machine ca.: 11 x 2,9 x 1,8 mequipped with:- CNC control FANUC Series 0i Mate-MD- tailstock- 5 closed steady rests- 4 support blocks- Splash guard doors- CEThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 630 mmgrinding length: 6000 mmcentre height: 300 mmworkpiece weight: 2500 kggrinding wheel dia. x width: 700 x 80 mmgrinding spindle speed: 12 - 1800 U/minrapid traverse grinding slide: 350 mmfeed: minimalst 0,002 mmworkpiece spindle head:: turning speeds: 8 - 120 U/mintable - swivable: 10,1 °table speeds: 30 - 4500 m/mintotal power requirement: 30 kWweight of the machine ca.: 16 todimensions of the machine ca.: mEletricals were replaced with brand new ones in 2025.- Stone wheel 4set 700mm dia x 70,75,80,85mm width. + few extra stones- Wheel Dresser- Digital Read Out- Steady Rest 2set- Small Steady Rest 4set- Internal Grinding AttachmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CONTROLS  CNC controls FANUC 0I-TFP WORKING RANGE CYLINDRICAL GRINDING  swing diameter (max): 350 mm  workpiece weight between centers (max): 80 kgWORKING RANGE EXTERNAL GRINDING  grinding diameter (max): 350 mm  grinding length: 400 mmWORKPIECE SPINDLESTOCK  spindle revolutions (max): 1500 /min  drive power: 3 kW  spindle bore diameter: 30 mm  tool fixture: MK 5   c-axis: yes   - positioning/indexing: 0.5 °TAILSTOCK  distance betw. centers (max): 400 mm  sleeve stroke: 60 mm  taper: MK 4 SPINDLESTOCK GRINDING SPINDLE  X-axis travel: 370 mm  Z-axis travel: 500 mm  tilting range (B-direction) min: 60 °  drive power: 9 kWGRINDING TOOL  diameter (max): 500 mm  borehole: diameter: 203.2 mm  width: 63 mmELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  total weight approx.: 8500 kgONLY 1700 operating  ...

grinding diameter: 480 mmgrinding length: 2250 mmcentre height: 370 mmthroat: 900 mmlength of gap: 400 mmbed width: 480 mmturning speeds: 14-1000 U/minspindle passage: 85 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of  ...

Diamètre de meulage : - Mm, longueur de meulage : - Mmcentre de hauteur : - MMMÉCANIQUE : JA Distance centrale : 2000 mmPoids de la machine environ : 7,9 t Les données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.

Diamètre de meulage : - Mm, longueur de meulage : - Mmcentre de hauteur : - MMMÉCANIQUE : JA Distance centrale : 2000 mmPoids de la machine environ : 7,9 t Les données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.

grinding diameter: 630 mmgrinding length: 3000 mmcentre height: 315 mmgrinding wheel size: 750 x 100 x 305 mmgrinding wheel width: 150 taper: MK 6 chuck diameter: 315 mmgrinding head swivelling: 90 Gradgrinding spindle head - swivable: 30 °table - swivable: 4,30 - 6,30 Gradgrinding spindle speed: 815 / 935 U/minspindle speeds: 8 - 57 / 28 - 150 mmgrinding sp.stock-cross tvl. frwd/rear/total: 420 mmgrinding head quick motion: 80 mmtable speed -stepless-: 0,05 - 4,5 m/minworkpiece weight: 1200 kggrinding spindle drive: 22 kWControl: Siemens 840D total power requirement: 56 kVAweight of the machine ca.: 13 tdimensions of the machine ca.: 9900×2980×1875 mmThe machine is suitable for grinding cylindrical and conical workpieces usinglongitudinal and plunge grinding methods. The table movement, the feed movement of the grinding headstock, and the tailstock quill return are hydraulically oper ...

Diamètre de meulage : - Mm, longueur de meulage : - Mmcentre de hauteur : - MMMÉCANIQUE : JA Distance centrale : 2000 mmPoids de la machine environ : 7,9 t Les données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.

grinding diameter: 100 mmgrinding length: 400 mmcentre height: 100 mmz-axis: 425 mmtable speed -stepless-: 0,05 - 5,00 m/minworkpiece spindle head rotation speed: 90 - 1.000 U / min.grinding head swivelling: -2 - +30 Gradtailstock quill taper MT: 3 grinding wheel speeds: 1.800 / 2.000 U/mingrinding motor: 3,70 kWdimensions of grinding wheel: 350 x 50 x 127 mmtotal power requirement: 7,00 kWweight of the machine ca.: 2,50 tdimensions of the machine ca.: 3,00 x 2,50 x H2,20 mWith 2-axis digital display FAGOR, coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 850 mmgrinding length: 4000 mmcentre height: 425 mmcontrol: Siemens 8 max. workpiece weight between centres: 3000 kgworkpiece weight in steadies max.: 4000 kgmax. workpiece weight -without tailstock: 300 kgvertical Stroke: 0 - 90 °/deg.work piece spindle speed: 23 - 230 U/minworkpiece-spindlehead motor: 5,3 kWgrinding spindle head - swivable: +30 / -10 °/deg.dimensions of grinding wheel: 750 x 125 x 305 mmtable feed: 0,01 - 4000 mm/minrapid traverse of table: 10 m/mintable swivelabel +/-: +3 / -3 °/deg.grinding wheel speed: 25 - 50 m/secgrinding motor: 19 kWdimensions: 14,0 x 3,13 x 2,6 mtotal power requirement: kWweight of the machine ca.: 19,4 tdimensions of the machine ca.: mUniversal external cylindrical grinding machine, modernised in 2011 Siemens 828D control system Internal grinding head, swivelling MPM grinding wheel balancing machine Adjustable slide bear ...

Diamètre de meulage : 200 mm longueur de meulage : 340 mm hauteur centrale : 100 mm Contrôle : CNC : 25 kVA Tension : 110 / 220 / 3x165 / 3x380 VAC Tension de contrôle : 24 VDC Puissance totale requise : kWpoids de la machine environ : tDimensions de la machine vers : m Les données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.

grinding diameter: 515 mmgrinding length: 3000 mmcentre height: 250 mmturning speed range: 11,2 - 355 U/minquill stroke: 40 mmmorse taper: 5 rapid adjustment: 70 mmspindle turning speed range: 1080 - 1860 U/minworkpiece weight: max. 500 kgtable speeds: 0,05 - 5 m/mintotal power requirement: 17 kWweight of the machine ca.: 9 tdimensions of the machine ca.: 8,0 x 3,0 x 2,6 mUniversal external cylindrical grinding machine- coolant tank & magnetic filter- feed with adjustable stop- tailstock with air bearings- workpiece spindle- various steady restsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 850 mmgrinding length: 6000 mmcentre height: 425 mmgrinding wheel size: 750 x 100 x 305 mmtable - swivable: -2 / +2 Gradtable load capacity: 3000 kgchucking diameter: 315 mmgrinding head swivelling: 90 Gradspindle taper MT: 6 spindle speeds: 12 -300 mmgrinding head - power requirement: 22 kWControl: Siemens 840D grinding wheel head adjustable: +30 / -10 °total power requirement: 41 kWweight of the machine ca.: 22 tdimensions of the machine ca.: 16,0 x 4 x 2,1 m- Siemens Sinumerik 840D CNC control- SBS balance system- INTERNAL GRINDING DEVICE- 4 support steady rests- Tailstock- Coolant system- Electronic hand-held control panel- Ball screws X-Z- Pneumatic quill stroke- Paper belt filter device- Oil mist extraction device- Full protective coverThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diamètre de meulage : mm Longueur de meulage : mmcentre hauteur : mm Puissance totale requise : kW de la machine environ : espace requis : m Les données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.

Diamètre de meulage : 390 mm Longueur de meulage : 650 mm Hauteur centrale : 200 mm Poids de la pièce : max. 250 kg - Axe : 380 mmz - Axe : 1150 mm Diamètre du disque de ponçage : 400 mm Vitesse périphérique : 20-50 m/sec Broche sans marche : 1 - 650 U/mintailstock Quill Conic MT : 4 Course de plume : 45 mmdia. de la plume : 50 mm Puissance totale requise : 22 kWweight de la machine environ : dimensions de la machine environ : m Les données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.

grinding diameter: 762 mmgrinding length: 5500 mmcentre height: mmworkpiece weight: 10000 kggrinding wheel size: 762 x 76 x 304,8 mmgrinding wheel turining speeds: 1 -750 U/minturning speed range - workpiece: 14,5 - 86 U/minmain drive motor: 14,8 kWworkpiece drive: 5,5 - 7,35 kWgrinding head infeeding speed: 0,00635 - 0,0508 mm/mintable speeds: 101 - 2021 mm/mintotal power requirement: ca 25 kWweight of the machine ca.: 27 tdimensions of the machine ca.: 13,5 x 3,35 mMachine complete with:- 9 x steadies.- Coolant/Filtration Tank.Machine has had over 80.000€ of engineering maintenance work/overhauling in 2023 including replacement of air bearing liners. 7 x steadies fully overhauled. Overhaul of top table & centre heights of workhead & tailstock.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

G+H precision external cylindrical grinding machine RS 600 CNC / P for machining multiple diameters in a single setup, in plunge or oscillating mode. Grinding table driven by a digital servo axis, ball screw with a 10 mm pitch, axis speed 0.01 mm/min - 15 m/min, positioning via linear scale, resolution 0.001 mm, V-flat slide guide, guideways are Turcite-B coated. Disc feed support driven by a digital servo axis, ball screw with a 5 mm pitch, axis speed 0.01 mm/min - 10 m/min, positioning via linear scale, resolution 0.0005 mm, V-flat slide guide, guideways are Turcite-B coated. Workpiece headstock with digital servo spindle, positionable with initiator for detecting the reference mark, adjustable 0-1000 rpm; 2.7 kW power, MK5 taper bore, max. grinding diameter 260 mm. Tailstock with hydraulically operated quill, fine adjustment of cylindricity, max. center distance 600 mm. Center height  ...

G+H precision finishing machine FI 600 for machining multiple diameters in one setup., Feed table driven by digital servo axis, ball screw with 5 mm pitch, axis speed 0.01 mm/min – 15 m/min, positioning via internal encoder, resolution 0.001 mm, mechanical cylindricity adjustment +10° - 4°, V-flat slide guide, guideways are Turcite-B coated., Z-table movable for positioning a sword finisher, The Nagel finishing head is provided by the customer. Workhead with digital servo spindle, positionable with an initiator for detecting the reference mark, adjustable from 0-1000 rpm; 2.7 kW power, MK5 taper bore, max. grinding diameter 260 mm. Tailstock with hydraulically operated quill, fine adjustment of cylindricity, max. center distance 600 mm, center height 140 mm., Full-room machine enclosure, approximately 2.3 m high, open on the sides, with integrated loader. Front sliding door electrica ...

centre height: 175 mmcentre distance: 1000 mmgrinding wheel dia. x width: 400 x 50 / 225 x 20 mmgrinding wheel hole diameter: 127 / 76.2 mmgrinding wheel turining speeds: 1500-2200 U/mincross slide - travel: 245 mmworkpiece spindle head:: turning speed range - stepless: 6-600 U/minspindle cone MT: 5 tailstock quill taper MT: 3 max. angular position of the table: +/- 8 °weight of the machine ca.: 3.1 tdimensions of the machine ca.: 2.85 x 1.75 x 1.5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 350 mmgrinding length: 1000 mmcentre height: 175 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diamètre de meulage: 350 mmdésécrage: 1500 mm hauteur du centre: 175 mmdésoiteur totale: kWpoids de la machine ca.: tdimensions de la machine ca.: m