Tables de soudage (148)

Ensemble de base 1 / 24 pièces pour l’épaisseur du dessus de table 15 et 25 mm 4 serre-joints de serrage 300 mm, Rayon variable 8 boulons de serrage 2 unités stop 100mm 4 unités stop 150mm 2 pièces stop 225mm 1 Porte-brûleur 1 brosse de trou de 30mm 1 pièce de lotion séparatrice 500 ml 1 nettoyant de soudure sur naturel, Base biologique 500 ml Nombre de 24 postes Poids : 22 kg Auction-ID: A7-48486-189

5 pinces à vis en pièces pour un diamètre de trou 28 mm Projection max. 245mm Poignée en aluminium voir les photos Condition : jamais utilisée / neuve (5) Auction-ID: A7-48486-198

10 boulons de serrage à dégagement rapide en pièces pour un système de 28 mm Plage de serrage de 5 à 50 mm Quantité : 10 pièces. Plage de serrage 15 - 50 mm Diamètre du trou : 28 mm Poids 10 kg Dimensions L x Wide x H 0,3 x 0,3 x 0,2 m Condition : jamais utilisée / neuve (5) Auction-ID: A7-48486-97

Table de soudure / table de trous : Diamètre du trou : 28 mm La table est faite de 15 mm d’épaisseur, acier haute alliage S355 JR T=15 La surface n’est pas traitée. Flancs 165mm Hauteur réglable d’environ 880 à 980 mm Côté nervuré en dessous pour renforcer. y compris le stockage au sol Accessoires optionnels Platéité de surface 0,2 - 0,4 mm à 1000 mm. Base très stable, Cela permet à Table avec camion à palette. Les accessoires présentés sont optionnels Longueur de table : 2000 mm Largeur de table : 1000 mm Hauteur de table 850 - 900 mm Poids de la machine environ 0,45 t Condition : jamais utilisée / neuve (5) Auction-ID: A7-48486-88

Ensemble spécial de 96 pièces composé de : 1x Chariot à outils 30x boulons à déverrouillage rapide avec un court verrouillage à tournée, sans joints toriques 8x Universal Stop 150 L - Nitruré 4x Universal Stop 225 L - Nitruré 8x Angle de verrouillage et de serrage 175 L - fonte 2x Arrêt et angle de serrage 500 G à gauche - Nitruré 1x Butée et support de serrage 750 G à gauche - Nitruré 1x Butée et support de serrage 750 G à droite - Nitruré 1x Arrêt et angle de serrage 500 G à gauche - Nitruré 1x Stop et angle de serrage 500 G à droite - Nitruré 4x Arrêt et angle de serrage 300 G à gauche - Nitruré 8x Prisme Ø60-135° poli - avec collier Avec pelle et tête enfoncée Pince à vis professionnelle 16x - Nitrurée Serrage à vis professionnel 6x 45°/90° - Nitruré 4x Universal Stop 300 - Nitruré 1x ensemble d’accessoires composé de : Excentrique, Clés Alle ...

Table de soudure / table de trous : Diamètre du trou : 28 mm Espacement des trous 100 mm La table est faite de 15 mm d’épaisseur, acier haute alliage S355 JR T=15 La surface n’est pas traitée. Côté nervuré en dessous pour renforcer. Longueur de table : 4000 mm Largeur de table : 2000 mm Diamètre du trou : 28 mm Hauteur de table : 815 mm Poids de la machine : environ 1,3 t Auction-ID: A7-48486-118

Ensemble spécial 70 / 28 Système de 70 pièces, 28 mm, Composé de : 3x Serrage à vis D28 90° – Art.Nr. 4028397 3x Serrage à vis de tuyau D28 180° – Art.Nr. 4028396 3x Serrage à vis D28 45° – Art.Nr. 4028398 3x Serrage à vis de tuyau D28 300x150 – Art.Nr. 4028399 3x Serrage à vis D28 300x200 – Art.Nr. Référence 4028400 Quille de verrouillage à billes 15x D28x50 – Art.Nr. 4027663 Broche 10x D28x80 – Art.Nr. 4028876 4x Universal Stop D28 100x50x25 mm – Art.Nr. 4028469 4x Universal Stop D28 150x50x25 mm – Art.Nr. 4028470 4x Universal Stop D28 225x50x25 mm – Art.Nr. 4027657 2x Universal Stop D28 300x50x25 mm – Art.Nr. 4027659 2x Stop Clamping Bracket D28 75x50x75x25 mm – Art.Nr. 4028657 2x Supporter de serrage Stop D28 175x50x75x25 mm – Art.Nr. 4028658 2x Supporter de serrage Stop D28 175x50x175x25 mm – Art.Nr. 4028649 2x Supporter de serrage Stop D28 ...

Composé de : entre autres, 1 chariot, dimensions (LxLxH) environ : 1000x600x1150 mm Divers angles et prismes Auction-ID: A1-48096-341

: neu : ca. 2 - 4 Wochen ab Auftr : 995 €: 1200 x 800 mm: 150 kg: 16 mmTHIS MODEL IS DESIGNED FOR BEGINNERS AND FOR PROCESSING LIGHTER AND SMALLER WORKPIECES.Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern.2D standard welding and clamping table,1200 x 1200 with Cr75M+ hard chrome platingTable system: 16 mmMaterial thickness: 12 mmIncluding table substructure and standard table legs S355J2+N with Cr75M+ hard chrome plating Hole: 16 mm, material thickness: 12 mm Including coated table substructure Table top with 2-sided fine scaling and 50 x 50 mm grid line Rounded edges and holes Solid standard table legs with load capacity 1 tonne per leg, 500 kg per leg for castor modelThe data for this ad ...

: neu : ca. 2 - 4 Wochen ab Auftr : 449 €: 16 mmTool trolley for accessories 16mm system, mobileTools are not included in the price.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : 1725 €: 1485 €: 16 mmThe extended entry level with added value in the set configuration for the most common work steps and applications.Consisting of:8 screw clamps 180° HIS16Z30002 screw clamps 45° HIS16Z30452 V-support HIS16VP1004 stop brackets 90x37, 5mm HIS16WA90376 pieces stop bracket 90x90mm HIS16WA90902 pieces stop bracket 300mm HIS16WA3002 pieces stop bar 75mm HIS16FA0758 pieces stop bar 115mm HIS16FA11520 pieces quick clamping bolt short HIS16SB1001 piece cleaning brush HIS16RB1 piece torch holder HIS16BH1 piece cleaner HIS-Cleaner-1L1 piece anti-adhesive agent HIS-Premium-1LOPTION:Tool trolley HIS16WW1000 € 449,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6-8 Wochen ab Auftrag : 10265 €: 197.09 €: 4000 x 2000 mm: 850 mm: 8000 kg: 2340 kg: 200 mm: 28 mm- Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes- Hard chrome-plated table surface Cr75The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market.- Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers)- Grid lines 100 x 100 mm- 4 solid table feet withload capacity 2 ton/feet and levelling option- Different foot variants available (stan ...

: neu : ca. 2 Wochen ab Auftragse : 3165 €: 2754 €: 28 mmAccessory set consisting of:8 pcs. screw clamp 180° HIS28Z30004 pcs. screw clamp 45° HIS28Z30454 pcs. V-support HIS28VP10020 pcs. quick clamping bolt short HIS28SB1004 pcs. connnection bolt HIS28BS1002 pcs. manetic bolt HIS28MB1004 pcs. stop rail 150mm HIS28FA1506 pcs. stop rail 225mm HIS28FA2254 pcs. stop angle 175mm HIS28WA1752 pcs. stop angle 275mm HIS28WA1752751 pc. stop angle HIS28WA325L1 pc. stop angle HIS28WA325R1 pc. support angle 800 HIS28W800L1 pc. support angle 800 HIS28W800R1 pc. cleaning brush Nylon HIS28RB1 pc. torch holder HIS28BHand 1 care set (consisting of 1 pc. HIS-Cleaner-1L and HIS-Premium-1L)OPTION:Tool cart HIS28WW1000 € 545,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : 2590 €: 2255 €: 16 mmThe set for everyday and universal use with an extensive range of clamps, brackets and clamping options. Including tool trolley for an optimised and fast workflow.Consisting of:10 screw clamps 180° HIS16Z30004 screw clamps 45° HIS16Z30454 V-support HIS16VP1008 stop brackets 90x37, 5mm HIS16WA90378 pieces stop bracket 90x90mm HIS16WA90902 pieces stop bracket 300mm HIS16WA3001 piece stop bracket 500mm HIS16WA500L1 piece stop bracket 500mm HIS16WA500R4 pieces stop bar 75mm HIS16FA0758 pieces stop bar 115mm HIS16FA11528 pieces quick clamping bolt short HIS16SB1001 piece cleaning brush HIS16RB1 piece torch holder HIS16BH1 piece cleaner HIS- Cleaner-1L1 piece Anti-stick agent HIS-Premium-1LThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : 2697 €: 2000 x 1000 mm: 3000 kg: 348 kg: 100 mm: 12 mm: 16 mmTHIS MODEL FORMS THE BASIS OF THE ENTIRE SYSTEM. IT CAN BE EXTENDED ON ALL FIVE SIDES AS REQUIRED.Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern.3D standard welding and clamping table,2000 x 1000 x 100 mm with Cr75M+ hard chrome platingTable system: 16 mmMaterial thickness: 12 mmIncluding table substructure and standard table legs S355J2+N with Cr75M+ hard chrome plating Hole: 16 mm, material thickness: 12 mm Including coated table substructure Side panel 100 mm with 2-row hole pattern and 25 mm hole spacing Table top with 2-sided fine scaling and 50 x 50 mm grid line Rounded edges and holes S ...

: neu : ca. 4 Wochen ab Auftragse : 1940 €: 2000 x 1000 mm: 850 mm: 449 kg: 28 mm- Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes- Hard chrome-plated table surface Cr75The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market.- Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers)- Grid lines 100 x 100 mm- 4 solid table feet with levelling option- Different foot variants available (standard, height-adjustable and with castors)- Load capacity 50 ...

: neu : ca. 2 - 4 Wochen ab Auftr : 3420 €: 2000 x 1000 mm: 850 mm: 8000 kg: 712 kg: 200 mm: 28 mm- Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes- Hard chrome-plated table surface Cr75The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market.- Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers)- Grid lines 100 x 100 mm- 4 solid table feet withload capacity 2 ton/feet and levelling option- Different foot variants available (standard, height-a ...

: neu : ca. 2 - 4 Wochen ab Auftr : 4862 €: 3000 x 1500 mm: 3000 kg: 755 kg: 100 mm: 12 mm: 16 mmTHIS MODEL FORMS THE BASIS OF THE ENTIRE SYSTEM. IT CAN BE EXTENDED ON ALL FIVE SIDES AS REQUIRED.Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern.3D standard welding and clamping table,3000 x 1500 x 200 mm with Cr75M+ hard chrome platingTable system: 16 mmMaterial thickness: 12 mmIncluding table substructure and standard table legs S355J2+N with Cr75M+ hard chrome plating Hole: 16 mm, material thickness: 12 mm Including coated table substructure Side panel 200 mm with 2-row hole pattern and 25 mm hole spacing Table top with 2-sided fine scaling and 50 x 50 mm grid line Rounded edges and holes S ...

: neu : ca. 2 - 4 Wochen ab Auftr : 1190 €: 1000 x 1000 mm: 850 mm: 210 kg: 25 mm: 28 mm- Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes- Hard chrome-plated table surface Cr75The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market.- Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers)- Grid lines 100 x 100 mm- 4 solid table feet with levelling option- Different foot variants available (standard, height-adjustable and with castors)- Load capa ...

: neu : ca. 2 - 4 Wochen ab Auftr : 3695 €: 2400 x 1200 mm: 3000 kg: 482 kg: 200 mm: 16 mmTHIS MODEL FORMS THE BASIS OF THE ENTIRE SYSTEM. IT CAN BE EXTENDED ON ALL FIVE SIDES AS REQUIRED.Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern.3D standard welding and clamping table,2400 x 1200 x 100 mm with Cr75M+ hard chrome platingTable system: 16 mmMaterial thickness: 12 mmIncluding table substructure and standard table legs S355J2+N with Cr75M+ hard chrome plating Hole: 16 mm, material thickness: 12 mm Including coated table substructure Side panel 100 mm with 2-row hole pattern and 25 mm hole spacing Table top with 2-sided fine scaling and 50 x 50 mm grid line Rounded edges and holes Solid st ...

: neu : ca. 2 - 4 Wochen ab Auftr : 6400 €: 123.52 €: 3000 x 1500 mm: 850 mm: 8000 kg: 1544 kg: 200 mm: 28 mm- Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes- Hard chrome-plated table surface Cr75The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market.- Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers)- Grid lines 100 x 100 mm- 4 solid table feet withload capacity 2 ton/feet and levelling option- Different foot variants available (stand ...

: neu : ca. 2 - 4 Wochen ab Auftr : 1490 €: 1500 x 1000 mm: 850 mm: 344 kg: 28 mm- Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes- Hard chrome-plated table surface Cr75The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market.- Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers)- Grid lines 100 x 100 mm- 4 solid table feet with levelling option- Different foot variants available (standard, height-adjustable and with castors)- Load capacity 50 ...

: neu : ca. 2 - 4 Wochen ab Auftr : 2022 €: 1500 x 1000 mm: 3000 kg: 272 kg: 100 mm: 12 mm: 16 mmTHIS MODEL FORMS THE BASIS OF THE ENTIRE SYSTEM. IT CAN BE EXTENDED ON ALL FIVE SIDES AS REQUIRED.Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern.3D standard welding and clamping table,1500 x 1000 x 100 mm with Cr75M+ hard chrome platingTable system: 16 mmMaterial thickness: 12 mmIncluding table substructure and standard table legs S355J2+N with Cr75M+ hard chrome plating Hole: 16 mm, material thickness: 12 mm Including coated table substructure Side panel 100 mm with 2-row hole pattern and 25 mm hole spacing Table top with 2-sided fine scaling and 50 x 50 mm grid line Rounded edges and holes S ...

: gebraucht : 2468D : prompt, Zwischenverkauf v : Deutschland : 2970 €: 1 : 1890 €: 195 kg: 28 mmDEMO SET / MINT CONDITIONconsisting of: 1x accessories car (Delivery is galvanised) 4x angle stop 350 x 20 mm 4x adjustable angle stop 250 x 20 mm 15x Adjustment clamp 4x Multi-clamp 6x Stand angle, adjustable 175 x 20 mm 2x Stand angle, adjustable 225 x 21 mm 8x Stop rail 225 x 20 mm 10x Socket bolt 15x Plug holder 3x Ball Tension Bolt 4x Claw clamping bolt 28 x 100 mm 15x Spacer ringThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : 4400 €: 2400 x 1200 mm: 850 mm: 8000 kg: 945 kg: 200 mm: 28 mm- Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes- Hard chrome-plated table surface Cr75The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market.- Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers)- Grid lines 100 x 100 mm- 4 solid table feet withload capacity 2 ton/feet and levelling option- Different foot variants available (standard, height-a ...

Table à rouleaux industriels – 3000 x 1200 mm Table à rouleaux industriels à vendre, idéale pour la manipulation et le transfert de pièces métalliques, de feuilles, de profils ou d’assemblages soudés dans des ateliers de production et de fabrication métallique. Caractéristiques : Dimensions utiles : environ 3000 x 1200 mm Construction robuste en acier Rouleaux métalliques résistants pour faciliter le déplacement des matériaux Cadre rigide, adapté à un usage industriel Adapté à l’intégration dans les lignes de production, les zones de découpe, de soudure ou d’assemblage Applications : Manipulation des tôles et profils métalliques Machines de coupe à alimentation Stations d’assemblage et de soudage Transport manuel des pièces lourdes La machine est vendue dans l’état montré sur les photos, plus de données techniques voir PDF 12 - Rouleau i ...

: neu : ca. 2 - 4 Wochen ab Auftr : 2860 €: 1500 x 1000 mm: 850 mm: 8000 kg: 541 kg: 200 mm: 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes- Hard chrome-plated table surface Cr75The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market.- Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers)- Grid lines 100 x 100 mm- 4 solid table feet withload capacity 2 ton/feet and levelling option- Different foot variants available (standard, height- ...

Ensemble spécial 80 pièces, système 28mm Matériau : acier de qualité polie Portée de la livraison voir les photos Nombre de 80 lots Poids 150 kg Nouvel état Diamètre du trou : 28 mm Dimensions : L x Largeur x Haut, 0,8 x 0,6 x 0,5 m Auction-ID: A7-48486-177

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kgProduct description:Siegmund retro offer incl. accessories:>.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmAccessories:- 6 x Professional screw clamp, nitrided- 2 x stop and clamping angle 175 L nitrided- 10 x quick-clamping bolts without groove, double burnished- 8 x universal stop 225 L nitrided- 2 x stop and clamping bracket 500 G nitrided- 1 x accessory setThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 22 mmweight: 740 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1500 mmtable width: 1500 mmtable height: 150 mmbore: 28 mmweight: 543 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 1 weight: 2,57 kgwidth: 265 mmheight: 250 mmclamping force max.: 3 kNThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Longueur de la table : 1200 mm Largeur de la table : 800 mm Hauteur de la table : 980 mm : kg-poids de la machine vers : 0,95 tStation de travail - Diamètre du trou : 28 mm - Grille : 100 x 100 mm - Panneaux latéraux : 150 mm - Épaisseur du panneau : 10 mm Les données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.

Nombre : 10 Stk. Plage de serrage : 25 mm : 28 mm Poids : 10 kg Dimensions : 0,3 x 0,3 x 0,2 m10 Boulons de serrage à dégagement rapide - système de trous de 28 mm - pour une épaisseur de table de 25 mm Les données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.

bore: 16 mmweight: 24 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 16 mmweight: 41 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 16 mmweight: 86 kg4-163400Consisting of:- 10x Professional screw clamp, burnished/nitrided- 4x Professional screw clamp 45°/90°, burnished- 8x Vario Prisma Ø 50 90°/120° with screwed-in collar, nitrided- 30x quick-release bolts without groove, double burnished- 8x universal stop 80 L, nitrided- 10x universal stop 115 L, nitrided- 10x stop and clamping angle 90 X, nitrided- 10x stop and clamping angle 90 L, nitrided- 4x stop and clamping angle 300 G, nitrided- 1x set of stop and clamping angles 250 G with rotating angle, nitrided- 1x set of stop and clamping angles 500 GK, nitrided- 1x tool trolley, powder-coated- 1x accessory setThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 16 mmweight: 109 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mmweight: 918 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

alésage : 16 mm de poids : 13 kgLes données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.

bore: 22 mmweight: 92 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1000 mmtable width: 1000 mmtable height: 150 mmbore: 22 mmweight: 300 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1500 mmtable width: 1000 mmtable height: 150 mmbore: 22 mmweight: 420 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1500 mmtable width: 1500 mmtable height: 150 mmbore: 22 mmweight: 585 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mmtable width: 1000 mmtable height: 200 mmbore: 28 mmweight: 730 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mmtable width: 800 mmtable height: 200 mmbore: 28 mmweight: 408 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.