APV Uperizer + Gaulin MC 45-5TPSX Lignes de production

APV Direct Steam Injection (DSI) Uperizer UHT processing Plant with Aseptic Homogeniser, previously used for the sterilisation of milk and dairy products. The installation has a processing capacity of 7.600 litres per hour and is designed for high-temperature sterilisation at temperatures of up to 150°C., The system utilises direct steam injection for rapid product heating, followed by flash cooling under vacuum to achieve the desired processing temperature. The line is equipped with an APV Gaulin MC 45-5TPSX aseptic homogeniser, ensuring efficient homogenisation under high pressure for consistent product quality., In the Uperizer head, pure, culinary-grade steam is injected directly into the product flow under high pressure. This causes the temperature to rise almost instantaneously—within fractions of a second—to between 140 °C and 150 °C. The milk is then held at this temperature for a few seconds in a holding tube to eliminate all bacteria and heat-resistant spores. The hot product flows directly into a vacuum expansion chamber (the flash vessel). Due to the sudden drop in pressure, the product immediately cools down—via rapid evaporation—to its original temperature (approx. 75–80 °C). During this flash process, the exact amount of water that was previously added to the milk as steam evaporates. As a result, the concentration and composition of the product remain unchanged., Main Equipment and Components:, - Product level tank., - Product and utility pumps, including:, - 2x APV Puma centrifugal pumps., - 1x SPX 70/10 pump., - 1x APV DW rotary lobe pump., - 1x Inoxpa SE-20 pump., - 1x Sterling vacuum pump., - Direct steam injection (DSI) heating unit., - Flash cooling tank., - Product holding tube., - Steam control valves., - Product and utility valves., - Flowmeters., - Stainless steel control panel, equipped with Schneider frequency converters, a temperature recorder and motor group controls., - Aseptic Homogeniser, Manufacturer: APV Gaulin, Model: MC 45-5TPSX, Type: Two-stage, hydraulically controlled aseptic homogeniser. Capacity: 7.600 litres/hour. Maximum homogenising pressure: 300 bar. Piston diameter: 54 mm. Motor power: 80 kW - 380 V - 50 Hz - 1.483 rpm - 142 A., Additional Information:, - Previously used for the sterilisation of milk and dairy products., - Maximum sterilisation temperature: 150°C., - Schneider touchscreen operation panel and several relays are excluded from the scope of supply., An interesting opportunity to acquire an established APV UHT processing system with direct steam injection and aseptic high-pressure homogenisation, suitable for industrial dairy processing applications, subject to inspection and verification of the installations condition and completeness., Type of Machine: Direct UHT Line, Capacity: 7.600 liter per hour, Products: Milk, Temperature range: 4 - 34 - 70 - 77 - 150 - 80 - 50 - 10 °C, Steam consumption during production: 1.140 kg/h, Holding tube: Yes, Aseptic homogeniser: Yes, Ground surface: ± 10 x 5 x 4 meter