d'autres machines de travail des métaux machines d'occasion à vendre (11,013)

A two-station tube deburring machine is offered. Tube diameter: 8mm. Processing stations: 2. Including deburring tools and control cabinet. An on-site inspection is possible.

Données techniques : Fabricant : Keyence Type : Projecteur 3D série XM-C1000 Contrôle : Keyence Plage de mesure : 600 x 300 x 200 mm Plus petite unité d’affichage : 1 μm Angle minimum : 0,0001 Charge de table : max. 25 kg Composants individuels Sonde de fabrication 3D : XM-P2000 Machine de mesure de coordonnées| XM-C1000 Moniteur du système de mesure de fabrication 3D : XM-M1200 Unité de contrôle de métrologie de fabrication 3D PC : XM-1600 Modèle RO66-55 Appareil photo et table du système de mesure de fabrication 3D : XM-S1200 État État : Utilisé Fonctionnel : testé et pleinement fonctionnel Autres équipements et accessoires comprenaient : Y compris le chariot à outils mobile y compris par boîte d’emballage d’origine

A CNC sinker EDM machine is offered. Travels X/Y/Z: approx. 565mm/400mm/415mm, table size: 840mm/600mm, max. workpiece weight: approx. 1000kg, max. dielectric fluid level above the table: approx. 360mm. Machine dimensions X/Y/Z: approx. 1110mm/1840mm/2780mm, machine weight: approx. 2750kg. An on-site inspection is possible.

A BÊCHÉ hydraulic short-stroke die forging hammer is offered for hot forming and die forging of workpieces. Working capacity: 16kJ, continuous blow frequency at full load: approx. 32/min-38/min, max. blow frequency: 122/min, final ram velocity: 5.1m/s, main drive pump flow rate: 187.5l/min, circulation pump flow rate: 120l/min, oil capacity in the drive head: 550l, clear width between the guides: 520mm, working height to upper edge of insert: 750mm, ram depth: 470mm, insertion depth: 550mm, die height min./max.: 120mm/320mm. Total weight: approx. 23.2t, anvil bed, overall dimensions X/Y/Z: approx. 1485mm/825mm/4552mm, max. space requirement/foundation dimensions X/Y: approx. 3350mm/3300mm. An on-site inspection is possible.

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet, 2 doors, solid construction -Width: 950 mm -Depth: 420 mm -Height: 1950 mm -Shelves: 9 pieces, but only 2 mounting brackets -Door: lockable, without key -Weight: 67 kg

IRLE IRD 1600 CNC Machine d’usinage de fin Fabricant : IRLE Type : IRD 1600 CNC Année de fabrication : 2004 Contrôle : diamètre maximal de la conduite à usiner 1 625 mm minimum diamètre de tuyau à usiner 406 mm max longueur de tuyau à usiner 13 200 mm longueur minimale de tuyau à usiner 6 000 mm min. épaisseur minimale de paroi de tuyau 12 mm Épaisseur maximale de paroi de tuyau lors de la copie d’environ 40 mm Épaisseur maximale de la paroi de la conduite à usiner en fonctionnement CNC 70 mm Poids maximal de la conduite à soulever 250 KN Hauteur entre le couloir de la salle et l’entrée de conduit, 800 mm Longueur totale de la machine : environ 24 000 mm Largeur totale de la machine environ 4 100 mm Hauteur totale du plancher au bord supérieur de l’étau 5 000 mm Poids de la machine environ 700 nœuds 01 - Plateau intermédiaire avec entraînement de c ...

ERCOLINA MB 42 / Machine à plier des tubes à mandrin -CE - Identifiant -Année de construction 2009 - Capacité de flexion / tube en acier 42,4x3mm -Diamètre maximal du tube aluminium / cuivre 54x2mm - Tube de construction de meuble performance de flexion 48x1,5 mm -Matériau solide jusqu’à 30 mm -Angle maximal de flexion 210 degrés -Contrôle électronique avec affichage numérique -Max. 30 x mémoire programme -Programmes avec 9 courbes x - Protection contre la surcharge / Oui - Fonctionnement : Double pédale de pied (courbe - retour) -Vitesse de flexion maximale 2 tours par minute -Incluant un outil 1x -1,1 KW -Pédale -Documentation Dimensions : LxLxH 0,5x0,6x1,2 mètres / Poids 100Kg

Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, axial tool holder, quick-change holder, turning tool holder, clamping holder, turning tool holder, lathe turret tool holder -Manufacturer: Kelch, tool holder steel holder -Socket: Ø 32 mm, bolt circle Ø 102x18 mm -Quantity: 1x holder available -Dimensions: 295/140/H110 mm -Weight: 8.8 kg

Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Manufacturer: Sandvik Coromant, face milling cutter -Type: R 265.1-100M -Hole: Ø 40 mm -Dimensions: Ø 105 x 50 mm -Weight: 2.3 kg

End mill, roller cutter, milling cutter, disc cutter, slot cutter -Manufacturer: Fette, roller end mills, disc cutters -Type: A175x20N -Hole: Ø 40 mm -Dimensions: Ø 166 x 18 mm -Weight: 2.5 kg

Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Manufacturer: Widax, face milling cutter head, partially without indexable inserts -Cutting head: Widia type WIDAX M40 Ø 125 R-8 -Number of teeth: 8 -Hole: Ø 40 mm -Dimensions: Ø 130 x 62 mm -Weight: 3.7 kg

Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face mill -Manufacturer: Seco, Secodex Face milling cutter head without indexable inserts -Type: Secodex R257.1- 125 -Hole: Ø 40 mm -Dimensions: Ø 136 x 62 mm -Weight: 3.9 kg

Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Manufacturer: Widax, face milling cutter head diameter 315 mm -Cutter head: Widia type WIDAX M45 Ø 315 R 16 -Number of teeth: 16 -Hole: Ø 60 mm -Dimensions: Ø 335 x 78 mm -Weight: 38.5 kg

Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Manufacturer: Widia, Indexable insert milling cutter, face milling cutter, cutter head without indexable inserts -Type: WIDAX Ø 123 mm -Hole: Ø 40 mm -Quantity: 2x milling heads available -Price: per piece -Dimensions: Ø 123 x 27 mm -Weight: 1.6 kg/pc.

Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Manufacturer: Widia, Indexable insert milling cutter, face milling cutter, cutter head -Type: WIDAX 1185837 Ø 125 mm -Hole: Ø 40 mm -Dimensions: Ø 125 x 27 mm -Weight: 1.7 kg

Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Face milling cutter: cutter head corner cutter -Type: Ø 160 mm -Recording: SK50 -Dimensions: Ø 160 x 250 mm -Weight: 11.2 kg

Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Face milling cutter: cutter head -Type: Ø 167 mm -Hole: Ø 50 mm -Dimensions: Ø 167 x 62 mm -Weight: 5.9 kg

Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Face milling cutter: cutter head -Type: UER 200-1-12 -Mount: Ø 60 mm / Bolt circle Ø 102 x 18 mm -Dimensions: Ø 200 x 62 mm -Weight: 8.7 kg

Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Manufacturer: Widax Kelch, face milling cutter head diameter 270 mm -Recording: Chalice 178 03 M Ø60 SK50 -Cutter head: Widia type WIDAX M45 D.250 R 13 -Number of teeth: 13 -Recording: SK50 -Dimensions: Ø 270 x 235 mm -Weight: 30.9 kg

Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Manufacturer: Sandvik Coromant, face milling cutter -Type: R 265.2-200M -Mount: Ø 60 mm / Bolt circle Ø 102 x 18 mm -Dimensions: Ø 205 x 62 mm -Weight: 8.6 kg

Plastic 3D printer manufactured in 2018. This HP Jet Fusion 3D 4200 features a build volume of 380 × 284 × 380 mm and utilizes Multi Jet Fusion technology for efficient production. It is fully functional and has been in productive operation until June 2026, making it suitable for industrial production of functional end-use parts and prototyping. If you are looking to get high-quality 3D printing capabilities, consider the HP Jet Fusion 3D 4200 machine we have for sale. Contact us for further details.

A Fanuc CNC wire EDM machine is available. Travel X/Y: 350mm/500mm, max. workpiece dimensions X/Y/Z: 450mm/650mm/300mm, max. workpiece weight: 500kg, machine dimensions X/Y/Z: approx. 2600mm/2550mm/2200mm, weight: approx. 2300kg, operating system: Fanuc Series 16-WA. Documentation available. An on-site inspection is possible.

Equipment: wire pay-off reel, mechanical flywheel, two wire guide tracks, enclosed straightening and cutting section, mechanical cam, eccentric and lever controls, discharge chute for cut wires, pneumatic service unit and pneumatic lines, retrofitted control panel with digital display, emergency stop button and transparent safety cover. An on-site inspection is possible.

Optical measurement machine manufactured in 2023. This VISCOM S3016 features a maximum PCB dimension capacity of up to 430 mm x 610 mm and includes an uninterruptible power supply. It is equipped with 4 orthogonal cameras and offers high-resolution inspection capabilities. If you are looking to get high-quality inspection capabilities, consider the VISCOM S3016 optical measurement machine we have for sale. Contact us for further details.

5 metalworking machines from various manufacturers are offered. 1) Column drilling machine VEB BS16, year of manufacture: 1960, weight: 110kg. 2) Milling machine Fritz Werner. 3) Pillar drilling machine Infratirea 4GC02502, year of manufacture: 1987. 4) Pillar drilling machine Infratirea, year of manufacture: 1987. 5) Radial drilling machine Tianjin No. 4 Z3063×20.

A nearly new Wheelabrator overhead monorail shot blasting machine is available. Rail overhang: 2338mm, rail width: 2980mm, working height: 880mm, work chamber height: 1600mm, max. workpiece diameter: 1200mm, max. workpiece weight: 400kg, exhaust air volume flow: 2500m³/h, exhaust air flange adjustment min./max.: -90°/90°, surface roughness range: 0.1µm-12.5µm, connected load: 22kW, component tolerances: ISO 2768-mK, welded construction tolerance: ISO 13920-AE. Machine dimensions X/Y/Z: approx. 4250mm/3250mm/4850mm, weight: approx. 5750kg, shot blasting hours: 58h, operating hours: 190h. Documentation available. An on-site inspection is possible.

Un tour à poteaux Tournage Coin Ciseau Filetage Ciseau Tourneau Ciseau latéral Ciseau intérieur Ciseau à rainures Tressaillement Tourin Ciseau Tourin Tourin courbé Ciseau Outil de tour

An automatic TRUMPF sheet loading and unloading unit for laser cutting machines is available. Max. sheet dimensions X/Y: 3000mm/1500mm, min. unloaded part dimensions X/Y: 150mm/150mm, max. sheet weight: 1100kg, max. loading stack height: 300mm. Documentation available. An on-site inspection is possible.

A total of four custom-built Wheelabrator turnover molding machines and one small prototype are available. Max. compressed air: 8bar. These are custom-built systems with the corresponding prototype. The maximum product size that can be produced on the four main machines is shown in the image. An on-site inspection is possible.

Four metalworking machines are offered. 1) Cloos GLC 255 MIG/MAG welding machine, year of manufacture: 2004, dimensions X/Y/Z: approx. 980mm/450mm/700mm, weight: approx. 115kg. 2) Cloos GLC 353 MC3 MIG/MAG pulsed welding machine, year of manufacture: 2007, weight: approx. 160kg. 3) hebö Type II bar twister, year of manufacture: 1979. 4) Eisele VMS II PV-p circular saw, year of manufacture: 1974, weight: approx. 290kg. Inspection by prior arrangement is possible.