d'autres machines de travail des métaux machines d'occasion à vendre (11,419)

Rotary table, rotary indexing table, dividing head, dividing head -Clamping surface: Ø 250 mm -Groove: 20 mm -Height: 108 mm -Dimensions: 580/350/H120 mm -Weight: 36 kg

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine-Dovetail: 118 by 160 mm 32 mm high-Drawing with the photos-Number: 1x counter bearing available-Price: per piece-Dimensions: 340/95/H220 mm-Weight: 15.4 kg

Tapping chucks, thread chucks, tapping chucks -with slip clutch -Cutting capacity: max. M16 -Recording: MK3 -Weight: 3.2 kg

Clamping plate, welding table, welding table, straightening plate -Width: 1500 mm -Length: 1500 mm -Height: 125 mm -Surface: good -Holes: Ø 50 mm -Transport dimensions: 1500/1500/H125 mm -Weight: 1500 kg

Clamping plate, welding table, welding table, straightening plate -Width: 750 mm -Length: 1000 mm -Height: 850 mm -Surface: milled -partly with threaded holes -Drawer -Plate thickness: 30 mm -with supporting ribs -Weight: 256 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outside: Ø 3x201/1x190 mm -Cone: 82 mm -Hole circle: Ø 105 mm -Number: 2x discs still available -Price: complete -Weight: 11 kg

Bezel, stick, lynette -Max. Passage: Ø 65 mm -Tip height: 83 mm -Edition: gray cast iron -technical drawing with the photos -Dimensions: 250/280/H65 mm -Weight: 6 kg

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Swallowtail: 75 by 110 mm 25 mm high -Drawing with the photos -Dimensions: 215/70/H200 mm -Weight: 10 kg

GeneralTraveling column machine; Control: CELOS X with HEIDENHAIN TNC7 Technical DataFeed rate longitudinal/transverse/vertical50000/50000/50000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Longitudinal2000 mmCross800 mmVertical850 mmTool changerType of magazineChain Number of tools50 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmSwivelhead, B-axisControlled NC swivel milling head 12,000 rpm (B-axis) with clamping in position Continuously positioning NC- swivel milling head with integrated motor spindle for 4/5 axes positioning and simultaneous machining. Swivel speed: 50 rpm Swivel range: ±12Clamping System HSK-A 100Spindle taper HSK-A 100Speed range 20 -12000 rpmTorque (40% DC) 288 NmTorque (100% DC) 187 NmDrive power (40% DC) 44 kWDrive power (1 ...

Armoire à tiroirs à magazines HAHN+KOLB 10 tiroirs, environ 100x105x80t cm, petit contenu, sans les objets sur l’armoire

Offre 25447 Données techniques : - Heures d’ouverture 13598 h - Pression de fonctionnement 12,75 bar - Quantité de livraison approximative. 21,7 l/s - Transmission 400 V / 7,5 kW - Vitesse moteur approximative. 3000 tr/min - Filtre à air - Espace nécessaire environ. F 1400 x H 1600 x D 800 mm - Poids environ. 270 kg

Type de machine : Système de nettoyage aqueux Marque : LPW Type : PowerJet 670T4 Année de fabrication : 2010 En raison d’un déménagement et du manque d’utilisation, le système de nettoyage est vendu à très bas prix. Prix d’origine : environ 450 000,00 € Le système dispose de deux chambres de travail et convient aux tâches de nettoyage exigeantes, y compris l’application de la protection contre la corrosion sur une base aqueuse. La machine a fonctionné pour la dernière fois en 2023 et nécessite un entretien important avant sa remise en service.

Turning tool with indexable cutting jaws, clamping holder, turning tool, indexable insert holder, turning tool, indexable insert tool -Length: 300/230 mm -Height: 35 mm -Weight: 4 kg

Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head, spindle tool-Manufacturer: Sandvik Coromant R391.B03R-40F53 A-Socket: Ø 40 mm-Boring tool holder: 16 x 8 mm-Tool: Ø 435 mm-Weight: 6.1 kg

Machine vise, sturdy vise, drill vise -Jaw width: 250 mm -Back height: 50 mm -Clamping depth: 270 mm -Dimensions: 640/440/H220 mm-Weight: 79 kg

Gear, gears, gear shaft, pinion shaft, spur gear, spur gear, hollow ground gear -Gear: spur gear with hollow ground 63 teeth -Shaft holder: inner Ø 40 x 45 mm -Dimensions: see photos -Dimensions total: Ø 134 x 60 mm -Weight: 1.8 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker, clothes locker-Steel locker: double-winged, compartment width 30 cm-Width: 600mm-Depth: 500mm-Height: 1820mm-Doors: lockable, without lock-Number: 2x locker available (1x with 2 shelves)-Price per piece-Weight: 40kg / 42kg

Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: Angle adjustable 90° -Groove width: 28 mm -Groove spacing: 150 mm -Dimensions: see photos / technical drawing -Dimensions: 1000/800/H630 mm -Weight: 871 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws-Top jaws: Jaw set for three-jaw lathe chuck, soft-Jaw width: 20 mm-Dimensions: see photo technical drawing-Total dimensions: 70/60/H55 mm-Total weight: 1.5 kg

Bezel, stick, lynette -max. passage: Ø 107 mm -Tip height: 180 mm -Edition: gray cast iron -Technical drawing in the photos -Dimensions: 370/340/H80 mm -Weight: 16 kg

Tailstock counter bearing for dividing head, dividing apparatus -Peak height: 95-115 mm -Recording: MK2 -Dimensions: 180/100/H110 mm -Weight: 4 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: soft top jaws for key bar chucks, helical toothed -Jaw width: 22 mm -Dimensions: see photo technical drawing -matching key bar chuck: ID12273 -Dimensions total: 90/70/H68 mm -Total weight: 2.1 kg

Bezel, moving bezel, bezel, setting stick, lynette -Max. passage: Ø 70 mm -Edition: Brass -Hole spacing: 295 mm -Peak height: 135 mm -Weight: 4 kg

hydraulic scissors, hydraulic cylinders for scissors / spreader, hydraulic rescue kit, rescue scissors, rescue spreader-Manufacturer: Lancier, basic unit hydraulic shear / spreader-Type: HHC 230-F-Nominal pressure: 720 bar-Dimensions: 1050/260 / H210 mm-Weight: 13.4 kg

Tool holder, milling holder, milling tool -Number: 8x SK50 mounts -different designs -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -suitable for tool changers -is only sold complete -Weight: 32 kg

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine-Swallowtail: 85 by 120 mm 25 mm high-Drawing with the photos-Dimensions: 235/100/H270 mm-Weight: 15.5 kg

Spotting ruler, dressing ruler, test ruler, straightening ruler, straightening bar-Spotting ruler: 60°-Ruler length: 2015 mm-Dimensions: 2275/120/H105 mm-Weight: 90 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set-Top jaws: Jaw set for four-jaw chuck, hard-Jaw width: 34 mm-Dimensions: see photo technical drawing-Dimensions total: 130/136/H80 mm-Total weight: 7.3 kg

Tool holder, milling holder, milling tool, long milling arbor, arbor holder, cutter head holder, cutter head holder -Milling holder: Type SK50 7 pieces -Intake: Ø 50/40/32/22 mm see photos -Transport dimensions: 390/220/H250 mm -Total weight: 27.2 kg

moving point, moving center point, moving Morse taper, moving-barrel tip: shaft-mounted-Recording: MK5-Dimensions: Ø 85/220 mm-Weight: 2.8 kg