d'autres machines de travail des métaux machines d'occasion à vendre (10,983)

température max. : 420 Gradtaille de l’ouverture : 200 mmprofondeur de la chambre : 350 mmPuissance totale requise : 2,5 kWPoids de la machine env. : tdimensions de la machine env. : m

x-travel: 2400 mmy-travel: 1600 mmz-travel: 1800 mmtotal power requirement: kWweight of the machine ca.: 3300 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 400 mmgear width: 75 mmmax. module: 0,5 min. module: 60 total power requirement: 25 kWweight of the machine ca.: 7 tdimensions of the machine ca.: mL O R E N Z (Germany)High Performance Automatic Gear ShaperModel LS 400 Year 1975 Serial No. 12 592 ______________________________________________________________________ ___________External gear, max. Ø 400 mm (possibly larger)Internal gear dia. 350 mmGear width, max. 75 mmModule range 0.5 - 6Length of stroke 82 mmAdjustment of stroke position 0 - 100 mmDistance between shaper spindle and machine body 250 mmSpindle taper MK 5No. of strokes, roughing/finishing process 118 - 1,000 per minTable size 400 mmTable bore 125 mmMounting height between table and shaper head 190 / 290 mmAxial tra ...

thread dia.: M3 - M12 mm: 400 U/min.: 28 Nmair pressure: 6 - 8 barworking area: 150 - 1900 mmweight of the machine ca.: 12 kgPneumatic Tapping Machines for M3 - M12 thread, angle adjustable.6 pcs. Keyless chuck with clutch.optional:Working table with T-slots: 750x600x650mm 990x700x800mm or.Magnetic base.Available up to max. M16, M22 and M33.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 9200 mmy-travel: 1600 mmz-travel: 2400 mmdia. of test piece: mmworking area: mmdist. between centers: mmcontrol: ZEISS C 99 total power requirement: kWweight of the machine ca.: 30 tdimensions of the machine ca.: 10 x 3,6 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diamètre : 0 mmlongueur de la pièce : 1000 mmlargeur de la pièce : 875 mmpuissance totale requise : kWpoids de la machine env. : tdimensions de la machine env. : mCellule d’ébavurage/brossage CNC, magasin d’outils, SIEMENS 510, 5 axesCellule de brossage et d’ébavurage flexible contrôlée par CNC

: 9 St.range L-W-H: 1,36 x 0,46 x 0,95 mmweight: 115 kgDrawer cabinetDimensions of drawer 1 124.5 x 40 x 10 cm (W x D x H)Dimensions of drawers 2 to 5 56.5 x 40 x 6 cm (W x D x H)Dimensions of drawer 6 56.5 x 40 x 14 cm (W x D x H)Dimensions of drawers 7 and 8 31 x 37 x 53 cm (W x D x H)Thickness of worktop 4 cmExternal dimensions of stacking boxes 10.5 x 13.5 x 7.5 cm (W x D x H)External dimensions of waste bin 25.5 x 32 x 38 cm (W x D x H)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Force de traction - max. : 3 tLumière du jour : 0 mmDiamètre du fil : mmPuissance totale requise : kWPoids de la machine env. : tDimensions de la machine env. : mTesteur de ressorts de pression et de tension

x-travel: 4070 mmy-travel: 1185 mmz-travel: 1985 mmtotal power requirement: kWweight of the machine ca.: 15 tdimensions of the machine ca.: 6000 x 4500 x 4000 mConsisting of: Working Range:Measuring column, longitudinal movement, X Axis 4,070 mmMeasuring slide, cross, as Y Axis (measuring head) 1,185 mmMeasuring slide, vertical, as Z Axis (vertical) 1,985 mmAdjustment of measuring head, roll axis 360 ° pitch axis 220 °Measuring table 5,000 x 2,000 mmWeight, approx. 15,000 kgSpace required 6,000 x 4,500 x 4,000 mmAccessories / Special Features :o 3D tracer head, with turning/swivelling device.o Universal 3D Measuring Software, KOROS CAD 5.2.0 from November 2001 (with lots of enhancements), as well as HOLOS UX for manual or automatic measuring of all geometric elements and free-form surfaces, ideally on passenger car bodies, engineering  ...

Longueur de l’enroulement : 0 Diamètre intérieur du stator : 0 Hauteur du paquet : 0 mmDiamètre du fil : 2,5 mmZone de travail : 45 x 1650 mmPuissance totale requise : 5 kWPoids de la machine env. : tDimensions de la machine env. : m

max. wheel diameter: 265 mmgear width: 45 mmmax. module: 4 min. module: 0,3 max. workpiece diameter: 300 mmstroke length max.: 0-50 mmstroke position adjustment: 25 mmdistance work spindle /surface of the table: 170/245 mmspindle taper: innen MK 4 table-size: 180 mmtable hole: 95/75 mmstrokes per minute: 450 - 840 total power requirement: 10 kWweight of the machine ca.: 5200 kgdimensions of the machine ca.: m: : : : : : : Max. gear Æ (external) approx. 265 mm Max. workpiece Æ for internal gears 300 mmMax. gear width 45 mmModule range 0.3 - 4Length of stroke 0 - 50 mmAdjustment of length of stroke 25 mmDistance between table and spindle, min./max. 170/245 mmSpindle taper (external 90 / internal 50) MT 4Tab ...

max. temperature: 1350 Gradsize of opening: 300 mmdepth of chamber: 600 mmtotal power requirement: 25 kWweight of the machine ca.: 1,5 t: : : : : Hardening Furnace Temp. 1350 °C H E R E A U S Electrically heated Hardening Furnace with Double Chambers for preheating and hardening.Model DKM 5 Year 1965______________________________________________________________ Temperature range max. chamber 1 1.000 °Celsius Temperature range max. chamber 2 1.350 °Celsius Door opening 300 x 200 mm Chamber size width x height x depth 300 x 200 x 500 mm For chamber 2 300 x 200 x 600 mmWorking height above floor 1.050 bzw. 1.625 mmHeating up time 20°- ...

amplification -fold: 100 diameter: 560 mmworkpiece height max.: mmtotal power requirement: kWweight of the machine ca.: 350 tdimensions of the machine ca.: 650 x 1000 x 1800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 850 mmy-travel: 1200 mmz-travel: 600 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mUniversal 3D measuring center, double-column, modern software, many accessoriesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diamètre : 0 mm Longueur de la pièce : 0 mmPuissance totale requise : kWPoids de la machine env. : tDimensions de la machine env. : mAppareil d’essai de fissures pour grandes séries de pièces

0 : 945 x 605 x 605 mmPression de service : 2,2 - 5,5 barDimensions : 1,0 x 0,61 x 1,65 m : 1300 x 1000 x 750 cmConsommation d’air : 250 l/min.Poids de la machine env. : 0,09 t

0 : 830 x 530 x 530 mmPression de service : 2,2 - 5,5 barConsommation d’air : 250 l/min.poids de la machine env. : 50 Kg : 0,95 x 0,65 x ,7 cm

pinces de serrage : 3 - 20 mm cône d’outil : Sk 40 Poids : 4,5 kgDimensions : 350 x 250 x 100 mmJeu de pinces composé de :Une boîte de 18 pinces pour 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 16, 17, 18, 19, 20 mm.et une boîte avec porte-pince et clé

Diamètre du filetage : M3 - M8 mm

0 : 1170 x 880 x 825 mmPression de service : 2,5 - 8,0 barDimensions : 1,33 x 1,24 x 1,77 mConsommation d’air à 6 bar : 350 l/minPoids de la machine env. : 0,16 t

0 : 1170 x 580 x 580 mmPression de service : 2,2 - 8,0 barDimensions : 1,22 x 0,93 x 1,70 mConsommation d’air à 6 bar : 350 l/minPoids de la machine env. : 0,15 t

workpiece weight: 60 kgworkpiece length: 700 mmdiameter: 500 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 500 mmtable width: 350 mmampere: 65 AControl: AGIEVISION 5 CNC total power requirement: 20 kWweight of the machine ca.: 4000 kgdimensions of the machine ca.: mA G I E (Switzerland)CNC - Controlled Wire Cutting EDM Machine Model AGIECUT PROGRESS V 3, Year 2007Working range, X Y Z (=height) 500 x 350 x 426 mmWire head, U-V axis (helical/taper cuts) + / - 30 °/ +/- 70 mmResolution of axes 0.0001 mmSpeed for positioning the axes up to 3 m/Min.Tolerances (If machine is new) 4 µWorkpiece dimensions, L x W x H max. 1.050 x 650 x 420 mmMax.weight of workpiece with/w.o. Dieelektricum 400/800 kgClamping System Universal Beams with fixing holesCutting wire Ø  ...

Boucles : 4 couteaux : 0 Taille max. du papier : 42 x 63 cm

thread dia.: M3 - M16 mm: max. 187 U/min.working area: 180 - 2000 mmengine output: 0,7 kWElectric tapping machines for M3 - M16 thread,Angle adjustable.9 pcs. Quick-change chuck with slip clutch.Adjustable via display:variable speed, adjustable depth, material selection, choice ofMain direction of rotation, thread selection.optional:Clamping table with T-slots: 990x700x800mm.Magnetic base.Also available: M14 to M24 and M27 to M33.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 8 St.range L-W-H: 880 x 580 x 1000 mmweight: 156 kg: 100Kg je Lade Stable tool cabinet with 8 drawers, lockable.2 x 75, 4 x 100, 1 x 150 and 1 x 200mmInternal dimensions: 770x450 mm. Maximum load per drawer 100kg!Furnishings:32x boxes 75 x75 mm.16x boxes 75 x 150 mm.8x boxes 150 x 150 mm.12x dividers long32x short dividers1x stacking trayThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

honing diameter: 90 mmstroke: 490 mmthroat: 400 mmtotal power requirement: 10 kWweight of the machine ca.: 3.500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

degree: 650 working heigth: 250 mmlength: 250 mmwidth: 250 mmdepth: 450 mmtotal power requirement: 8 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Largeur : 33 mmDiamètre du boulon : 60 mm

press capacity: 148 tomaterial: Hartmetallstangen quality: Extrusionspressvorgang 0The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.