fraiseuses machines d'occasion à vendre (2,404)

x-travel: 800 mmy-travel: 450 mmz-travel: 500 mmControl: CNC 332 / TNC 355 total power requirement: 5,5 kWweight of the machine ca.: 4 tdimensions of the machine ca.: ca. 3 x 3 x 2,5 mNo. 2213Universal tool milling machine MAHO MH 800 TWorking area: 800 x 450 x 500(800 longitudinal / 450 vertical / 500 transverse)Drive: 5.5 kWControl: Heidenhain CNC 332 / TNC 355Universal built-in rotary tableCoolant deviceChip traySplash guard half cabin, tool clampTechnical documentationTool holder ISO 40,Table clamping surface 600 x 900 m, max. table load 500 kg,quill stroke 80 mmSpeed range 63 - 3150 rpmFeed rate 1 - 1500 mm/minRapid traverse: 4.5 m/minWeight: approx. 4 tonsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mmy-travel: 400 mmz-travel: 400 mmtotal power requirement: 4 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 222 mNo. 5124Universal tool milling machineDECKEL FP 4MWorking area: 500 x 400 x 400Drive: 4 kWControl: 3-axis digital display HeidenhainSpindle holder SK 40 / M16Speed range 50-2500 min-1Feed rates 8-630 mm/minRapid traverse 1.3 m/minFixed table 800 x 460 mmChip traydocumentationSpace requirement approx. 2 x 2 x 2 mWeight approx. 1500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

X-Travel : 300 mmY-Travel : 300 mmZ-Travel : 400 mmCommande : Dialog / Contour 3 Puissance totale requise : 4 kWPoids de la machine env. : 1,5 tDimensions de la machine env. : 232 mPrix du colis : 3 x DECKEL FP 2 EXW free lorryStock no :5267 FP 2 A Contour 35268 FP 2 A Contour 35290 FP 2 NC Dialogue 2

x-travel: 2000 mmy-travel: 920 mmz-travel: 900 mmtable surface area: 2200 x 750 mmtable load: 3 tnumber of T-slots: 6 T - slots - width: 18 mmT - slots distance: 120 mmspindle taper: ISO 50 DIN 69871-B spindle speed max.: 3000 U/mintransmission ratio: 1 speeds infinitely variable range 1: 60 - 3000 U/minweight of the machine ca.: 21,6 tfeeds longditudinal/cross/vertical: 0 - 5000 mm/minrapid traverse: 15000 mm/mintotal power requirement: 38 kwweight of the machine ca.: 11 tPull studs DIN69872-B | IKZHours:Control on: 43036 hMachine on: 41311 hProgram run 13894 hThe machine is already dismantled The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-Travel : 500 mmY-Travel : 400 mmZ-Travel : 400 mmPuissance totale requise : 4 kWPoids de la machine env. : 1,8 tDimensions de la machine env. : 222 m1 x UWF 700 Digi3 x UWF 801 TNC 135 + 1241 x UWF 802 MDe la liquidation du stock, partiellement non fonctionnel / nécessitant une réparationPrix VHS / contre offre

x-travel: 700 mmy-travel: 370 mmz-travel: 350 mmtotal power requirement: 5,5 kWweight of the machine ca.: 3 tdimensions of the machine ca.: 2,5 x 2,5 x 2,5 mVertical milling machineSpindle ISO-40, Speed range 48-2100 1/min,feeds 10-1000 mm/min, rapid traverseSpace requirement approx. 2.5 x 2.5 m, Weight approx. 2.5 tonnes.Active digital readout Heidenhain TNC-114Table clamping surface 1000 x 400 mm,Coolant device.Working area: 700 x 370 x 350Drive: 4/5.5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1600 mmy-travel: 800 mmz-travel: 800 mmControl: CNC 432 total power requirement: 22 kWweight of the machine ca.: 17 tdimensions of the machine ca.: 5 x 3,70 x 3 mNr. 2754 Universal bed milling machine MAHO MH 1600 SSpindle SK-50,Speed range up to 4000 min-1Max. workpiece weight 3000kg35,000 switch-on hours,10,0 0spindle hours,Dimensions 5 x 3.70 x 3 m,Weight 16 tonnes.Automatic swivelling milling head,Fixed table 1800 x 980 mm,36-fold universal tool changer,Internal coolant supply with paper belt filter,chip conveyor, manual control bar.Working area: 1600 x 800 x 800Drive: 22 kWControl: Philips CNC 432The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Course x : 1200 mmCourse Y : 400 mmCourse Z : 400 mmPuissance totale requise : 5 kWPoids de la machine env. : 2,5 tDimensions de la machine env. : 3 x 2 x 2 mRéf. 4427Fraiseuse d’outils universelle DECKEL FP 4 L / 2707Zone de travail : 1200 x 400Tableà angle fixe Commande : affichagenumérique 3 axes Poids env. 3,5 tonnesEncombrement 3 x 2 x 2 m

x-travel: 700 mmy-travel: 500 mmz-travel: 500 mmControl: CNC 432 total power requirement: 10 kWweight of the machine ca.: 4 tdimensions of the machine ca.: 3 x 3 x 2,6 mNo. 0052Universal tool milling machine MAHO MH 700 CWorking area: 700 x 500 x 450Drive: 10 kWControl: Philips CNC-432Fixed tableFully protected cabin with 3 sliding doorsTool holder: ISO-40.Speeds: 20-3150 min-1Feed rate: 1-3000 mm/min,rapid traverse 6 m/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mmy-travel: 450 mmz-travel: 450 mmtotal power requirement: 4 kWweight of the machine ca.: 3,3 tdimensions of the machine ca.: 2 x 3 x 3 mNo. 1859Universal tool milling machine MAHO MH 800Working area: 700 x 450 x 450Universal built-in rotary table 1050 x 627 mm,quill feed gear 0.02-0.2 mm/revSpindle ISO-40,Speed range 32-1600 1/min,feeds 5-500 mm/min, rapid traverse 1.4 (0.7) m/min.Cross table movement by hand 225 mm,Table top rotation 360°Table swivels/tiltable +- 30° each.Space requirement approx. 2 x 3 x 3 m,Weight approx. 3.3 tons.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mmy-travel: 160 mmz-travel: 340 mmtotal power requirement: 2 kWweight of the machine ca.: 1 tdimensions of the machine ca.: 1,5 x 2 x 2 mNr. 3287Universal tool milling machine DECKEL FP 1Working area: 300 x 160 x 340Control: Active digital displayDrive: 1.5 kWSpeed range 2000 rpmTool holder SK-40Rigid angled table 210 x 600 mmDocumentationOptional / available on request:- Universal table- counter holder- Rotary table Ø 380mm- Dividing headThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 410 mmy-travel: 310 mmz-travel: 400 mmtotal power requirement: 2,2 kWweight of the machine ca.: 1,2 tdimensions of the machine ca.: 222 mUniversal tool milling machineHERMLE UWF 700Spindle holder SK 40Speed range 40-2000 minSpace requirement approx. 2 x 2 x 2 mWeight approx. 1100 kgFor further data see attached PDFRigid table 700 x 285Horizontal milling machine vertical - milling head enclosed - partially rep. conditionedDocumentationWorking area: approx. 410 x 310 x 400Drive: 2,2Heidenhain digital displayThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 710 mmy-travel: 600 mmz-travel: 455 mmControl: Dialog 11 total power requirement: 7,5 kWweight of the machine ca.: 5 tdimensions of the machine ca.: 4 x 3,5 x 2,5 mNo. 4430Universal tool milling machineWorking area: 710 x 600 x 455 mmDrive: 7.5Control: Dialog-11 controlSpindle holder SK 40Speed range up to 6,300Fixed tableCabinCoolant containerSpace requirement see data sheetWeight approx. 5 tonsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mmy-travel: 220 mmz-travel: 400 mmControl: Dialog 2 total power requirement: 1,6 / 2 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2,5 x 2,5 x 2,2 mNo. 5290Universal tool milling machine DECKEL FP 2 NC / 2801Working area: 300 x 220 x 400Drive: 1.6/2 kWControl: Dialog 2 contouring controlFixed table with chip traySpindle SK 40Speed range up to 3150 min-1Quill stroke 65 + 60 mmSpace requirement c.3 x 3.5 mTransport dimensions approx. 2 loading metersWeight approx. 1300 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mmy-travel: 300 mmz-travel: 400 mmtotal power requirement: 3 kWweight of the machine ca.: 2,5 tdimensions of the machine ca.: 2,52,52 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

X-Travel : 400 - 1600 mmY-Travel : 250 - 800 mmZ-Travel : 350 - 800 mmContrôle : CNC Poids de la machine env. : 1,6 - 16 tdimensions de la machine env. : - mMAHO - Paquet de déstockage -Prix spécial à vendre4 x fraiseuse-MAHO MH 400 C - CNC 432-MAHO MH 700 C - CNC 432-MAHO MH 800 T - CNC 332-MAHO MH 1600 S - CNC 432EXW - Ex works Bensheim / LorschCamion gratuit

x-travel: - mmy-travel: - mmz-travel: - mmtotal power requirement: - kWweight of the machine ca.: 1,3 tdimensions of the machine ca.: 1,51,52 mNo. 2510Universal milling machine Bridgeport ( type/design )Working area: table 1300 x 305Angle milling head with additional angle milling attachment and separate drive motor.Horizontal spindle MK-4,speed range 26-630 min-1,Angular milling head speed range 225 - 3385 min-1Feed range x/y 8.4-224 mm/min, z 3.1-85 mm/min.Space requirement approx. 1.5 x 1.5 m,Weight approx. 1300 kg.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: - mmx-travel: 1250 mmy-travel: 630 mmControl: Heidenhain TNC 426 / 430 total power requirement: 48 kWweight of the machine ca.: 12 tdimensions of the machine ca.: ca. 5 x 6 x 4 m mCNC jig boring machine / vertical machining centreoverhauled in 2000Spindle ISO 50,speed range 30-3000 min-1max. torque 522 Nmfeeds 3-2000 mm, rapid traverse 10 m/minmax. distance spindle nose - table surface 725 mmProjection spindle centre - stand 800 mm.Space requirement approx. 5 x 5 m,Weight approx. 12 tonnesThe machine was completely overhauled and modernised in 2000 with digital drives anddrives and Heidenhain controlFixed table 1200 x 71036-fold tool changer,coolant system,the pictured magnetic clamping table is not included in the scope of delivery ! -Working area: 1250 x 630 x 560Drive: 44 kWControl: Heidenhain TNC 426 PBThe data for this ad was created with ModulMWS - the software so ...

5 axes Axe X 800 mm Axe Y 800 mm Axe Z 600 mm Diamètre du cercle d’interférence 1070 mm Distance de la broche jusqu’à 823,5 mm Charge de la table de la machine 1000 kg Course rapide maximale X/Y/Z à TCP max 75 m/min Interface d’outil de coupe HSK-A63 Puissance de la broche du moteur à CDF 25 % max 50kW Couple de l’axe du moteur à CDF 25 % max 187 Nm Poids de la machine 13000 kgs Schéma de câblage : 2526-95-64934955 Système de filtration Resy Modèle : 14-P00449-3 Numéro de série : KBF- 452/500 Changeur de palettes Erowa Modèle RobotEasy N° de série ERE1364 Année 2014 Poids 1300kgs Refroidisseurs Hyfra Pedia Modèle sigma 7-s

Lamellar aprons, samurai aprons, machine protection, protective cover, bellows, protective cover system, protection system, guide protection,-Cover comes: from a WMW boring mill-for guide inside dimensions: 100 x 725 mm-Extractable: mm-Dimensions: 950/820/H150 mm-Weight: 30 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping, with air connection for easy movement (air cushion) -Support surface: 1645 x 250 / 695 x 310 mm -Wall thickness: 30/35 mm -Dimensions: 1645/310/H695 mm -Weight: 239kg

Milling machine, universal milling machine, tool milling machine, two-spindle milling machine, milling machine -Milling machine: Two-spindle milling machine for small parts -Dimensions: see photos -Drive: 0.37 kW each -Coolant device -Dimensions: 1000/850/H1360 mm -Weight: 352 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table, turning table-Clamping table made of: Wadkin router type LS 3687-Table surface: 760 x 765 mm-Table thickness: 13 mm-Clamping table: swiveling-Dimensions: 760/765/H160 mm-Weight: 85 kg

Copy part head, copy head, part head-Copy head rail for: lathe-Dimensions: 100/81/H1747 mm-Weight: 43 kg

Tool carrier for SK 30 holders-made of: polypropylene copolymer-Impact and scratch resistant, insensitive to heat-resistant to: mineral oil and various chemicals-Price: complete

Copy head, copy head, copy device, copy lathe-Copy head for: lathe-without: hydraulic unit-Dimensions: 1100/170/H370 mm-Weight: 143 kg

Reversible clamp, 4th axis, rotary table, rotary dividing table, controlled rotary table, dividing apparatus, dividing head, rotary indexing table Hydraulic rotary coupling -Manufacturer: Romheld, hydraulic reversible clamp with rotary coupling type 9284-003 711 -Number: 2x clamping unit available -Price per piece -Dimensions: 700/335/H430 mm -Weight: 113 kg/pc.

Reversible clamp, 4th axis, rotary table, rotary dividing table, controlled rotary table, dividing apparatus, dividing head, rotary indexing table Hydraulic rotary coupling -Manufacturer: Romheld, hydraulic reversible clamp with rotary coupling type 9284-826 908 -Number: 2x clamping unit available -Price per piece -Dimensions: 550/335/H400 mm -Weight: 90 kg/pc.

Une machine à tailler les engrenages CNC verticale Pfauter est disponible. Modules min./max. : 1/3, diamètre max. de la pièce : 150 mm, largeur max. de la dent : 150 mm, inclinaison de la tête de fraisage : +/-45, distance axe-axe de la fraise : 10 mm-160 mm, diamètre de la table : 160 mm, alésage de la table : 63 mm. Porte-outil : SK40, diamètre max. de la fraise : 130 mm, longueur max. de la fraise : 220 mm, vitesse : 600 tr/min, avance : 1500 mm/min, course tangentielle : 170 mm, déplacement rapide : 3 m/min. Dimensions de la machine X/Y/Z : env. 4000mm/3000mm/2500mm, poids : env. 6500kg. Une inspection sur place est possible.

mechanically switchable clutch, detachable clutch, power clutch, clutch-Manufacturer: Ortlinghaus, coupling without type designation-Translation: i= 1:1-Shafts: Ø 24x60 / 24x55 mm-Dimensions: 310/212/H213 mm-Weight: 32 kg