machines à souder machines d'occasion à vendre (1,689)

: JÄCKEL MIG 405 output: 400 AP: water cooling unit: Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1200 mmtable load: 1,2 tswivelling range: 0 - 120 Gradturning speeds: 0,06-0,6 U/minmax. torque on the faceplate: 2400 Nmtable pass: 200 mmwelding current: 500 Amperetotal power requirement: 0,75 + 1,1 kWweight of the machine ca.: 1,0 tELDING TABLE WITH LARGE THROUGH BORE• Self-locking gearbox, no pre- or after-run with eccentric load.• Electronic components from Siemens and Schneider.• Frequency-controlled, very accurate speed control.• Turntable with large through hole and T-slots.• High stability through a clever construction.• CE certificate.• Very good price / quality ratio.• The D-TLP series comes with remote control and foot pedal (left / right).No original pictures. Design but identical.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping range of chuck: 200 - 500 mmheight: 110 mmdaylight: 240 mmexternal diameter: Futter 320 mmexternal diameter: Spannhebel 700 mmweight: 56 kgCharacteristics:• Self-centering.• Reversible jaws.• Fixed clamping levers allow fast workpiece changes.• Low weight and flat design minimize the center of gravity.The D-D quick chuck enables a quick product change and is suitableexcellent with frequent component changes. You do not need a loose oneQuick release wrench, as the levers are integrated into the quick release chuck.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mmtable width: 1000 mmtable height: 920 - 1000 mmweight of the machine ca.: 0,45 tWelding table / hole table:Hole diameter: 28mmThe table is made of 15mm thick S355 steelThe surface is stained and oiled.Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides.Side panels 150 x 10mmHeight adjustable from approx. 920 - 1000mmRibbed bottom for reinforcement.including floor storageAccessories optionalAccessories shown are optionalThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1400 mmtable width: 1400 mmtable height: 900 mmtable load: 3000 Kgweight of the machine ca.: 0,5 tdimensions: 1,4 x 1,4 x 0,9 mWelding table / hole table:Hole diameter: 28.3mmThe table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N(St 52/3)Plasma nitriding provides a hard surface layer.height adjustable from approx. 880 - 980mmBottom ribbed for reinforcement.including ground storageAccessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mmtable width: 1000 mmtable height: 900 mmtable load: 3000 Kgweight of the machine ca.: 0,45 tdimensions: 2,0 x 1,0 x 0,9 mWelding table / hole table:Hole diameter: 28.3mmThe table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N(St 52/3)Plasma nitriding provides a hard surface layer.height adjustable from approx. 880 - 980mmBottom ribbed for reinforcement.including ground storageAccessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 4000 mmtable width: 2000 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 2,5 tdimensions: 4,0 x 2,0 x 0,9 mWelding table SIGMUND Professional 750 + Plasma-nitridedis made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers.The table has a material thickness of approx. 24.5-27mm.The holes have a diameter of 28mm.Hole arrangement in 100 mm grid on the table topparallel hole arrangement in 50 mm grid on the sides.Incl. Foot basic equipment. Pictured accessories optional.Price indication plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Une cellule de soudage Akon comprenant un robot Kuka et 2x sources de soudage Dinse est disponible. 1) Robot de soudage : Kuka KR 6 R900, charge utile : 6 kg, portée : 900 mm, commande : KR C4 Compact, charge de la bride : 25 kg, poids total : environ 170 kg. 2) Cellule de soudage automatique Akon Robotics avec plateau tournant et système de contrôle Kuka. 3) Source d’énergie de soudage Dinse Dix PI 900. Le moteur EP du 4e axe a été remplacé en 2023. Documentation disponible. Une inspection sur place est possible.

Une machine de découpe laser CO2 CNC Amada avec système de stockage automatisé LKI est disponible. 1) Puissance laser : 4kW (4000W), course X / Y / Z : 3100mm / 1550mm / 100mm, charge max. de la table : 920kg, épaisseur max. du matériau acier / acier inoxydable / aluminium : 20mm / 12mm / 10mm, dimensions du système laser X / Y / Z : env. 10000mm / 4300mm / 2100mm, poids : env. 11000kg. 2) Palettes : 8, découpe des palettes : 2, matière première : 2/3, déchargement : 4/3, hauteur de déchargement max. : 2200mm, dimensions max. du matériau X/Y : 3050mm/1525mm, dimensions min. de la feuille : 2000mm/1000mm, hauteur : 5400mm. Documentation disponible. Une inspection sur place est possible.

Course X/Y/Z : 2520mm/1550mm/300mm, dimensions max. de la feuille X/Y : 5040mm/1550mm, épaisseur max. du matériau acier doux/acier inoxydable/aluminium : 12mm/6mm/3mm, poids max. de la pièce : 330kg, vitesse de positionnement : 80m/min/80m/min/60mm/min, précision de positionnement : +/-0,01mm. Dimensions de la machine X/Y/Z : env. 5650mm/3650mm/2100mm, poids : env. 6600kg, heures de fonctionnement : 29499h. Y compris le modèle laser Fanuc C1500. Documentation disponible. Une inspection sur place est possible.

Un système laser avec 1 station de chargement et deux stations chacune est disponible. Appareils de soudage : 4, puissance laser : 3,3 kW, source du faisceau : laser à disque TruDisk 3302, dimensions de la pièce X/Y/Z : 300 mm/100 mm/100 mm, épaisseur du matériau : 1,5 mm, vitesse de soudage : 5600 mm/min, optique de soudage : Trumpf BEO D70, heures de fonctionnement : env. 70000h. Documentation disponible. Une inspection sur place est possible.

Une machine de découpe plasma à portique CNC complète ESAB est disponible. Course X/Y : 12000mm/4000mm, dimensions max. de la pièce X/Y : 12000mm/3000mm, épaisseur max. du matériau acier : 150mm, dimensions totales du système X/Y/Z : env. 15000mm/5200mm/1500mm. Composants du système : Unité de refroidissement Kjellberg KWE 360, boîte à gaz Kjellberg PGV 3 et connexion plasma Kjellberg PBA-360. Le système a été endommagé par le feu. Documentation disponible. Une inspection sur place est possible.

Robot travel path: 5000mm, arm length: 2500mm, lift: 1000mm, spin radius: 2200mm, L-manipulator load capacity: 2000kg, lift velocity: 0,85m/min, swing speed: 1,7/min, turn speed: 6/min. Roboter type: IGM RTE 497-S in hanging position, control: full digital PC-Robotcontrol, Type RCE, software: WIN 10 & Linux based System + igm Robotsoftware K6, welding process: 135 (GMAW), single-wire, Ø1,2mm, welding power source: digital Invert Welding Power Source TPS 500i (500A at 40% duty cycle), robot periphery: rotating boom for floor installation with 2,5m boom length, number of working stations: 1, working station: 3-axis L-Manipulator with lifting device with 2t nominal load capacity, security Technology: Pistol-Security-Shut-down in wrist axis, emergency Stop on Handtablet, on Manipulators and Control Panel, three-coloured warning light for the operating Status partition, security Door. machin ...

Eine Strecker Widerstandsstumpfschweißmaschine mit integrierter hydraulischer Presseinheit ist verfügbar. Nennleistung bei 50 %: 120kVA, Nennstrom : 300A, Betriebsdruck : 350bar, max. Spannkraft : 69 kN, max : 44 kN, Hydraulikaggregat : K-VDS-700, Schneidleistung : 32 mm, Kolbenpresskraft : 44 t, Schwenkbar : möglich. Maschinenabmessungen X/Y/Z : env. 1800mm/1100mm/1600mm, Gewicht : env. 2300kg, Steuerung : VIPA S7. Dokumentation vorhanden. Besichtigung vor Ort ist möglich.

Un système de soudage de treillis d’acier pour la production automatique de treillis métallique en acier soudé est disponible. Plage de largeur de maille : 250 mm-1600 mm, plage de longueur de maille : 600 mm-2900 mm, pas min. du fil transversal : 15 mm, pas min. du fil longitudinal : 25 mm, incréments du pas du fil longitudinal : 5 mm, plage du diamètre du fil : 3 mm-8 mm, nombre de fils longitudinaux : 20, nombre de presses à souder : 12, puissance nominale à 50 % : 6x130kVA. Une inspection sur place est possible.

A complete CNC double gantry plasma cutting system Microstep with oxyfuel torch for nesting, bevel cutting and tube processing is available. 1) Plasma cutting system, max. processing length: 16500mm, max. processing width: 2500mm, max. processing width including shaft: 3700mm, max. material thickness VA/structural steel: 20mm/40mm, number of gantries: 2. Gantry 1: with a plasma rotator and a Kjellberg HiFocus 280i neo plasma cutting source. Gantry 2: fully automatic oxy-acetylene torch for possible equipment of a second torch carriage. Pipe cutting device: pipe diameter range: 30mm-700mm, max. pipe length: 16500mm, operating hours: approx. 15000h. 2) Filter system Donaldson Cyclopeel DFPRO 16, volume flow: 16000m³/h, filter elements: 16. Documentation available. On-site inspection is possible. Expected to be available from the end of 2025/beginning of 2026. Pictures are from commissioni ...

Machine à souder entièrement fonctionnelle

Machine à souder, entièrement fonctionnelle

Lg.Nr. 25075 Mot. Table rotative et basculante de soudage Spécifications: - Capacité de charge 1000 kg - Diamètre de la plaque frontale 800 mm - La plaque frontale peut être inclinée par le moteur - Mouvement rotatif electr. Variable en continu 0 - 250 cm/min - Transmission du courant de soudage 650 A - Entraînement 400 V / 2,8 kW - Hauteur de la table en position horizontale env. 1100 millimètre - Re- + rotation dans le sens inverse des aiguilles d’une montre - Encombrement approximatif L 1200 x H 1100 x P 1500 mm - Poids env. 850 kg

Poids max. : 15/30 tDiamètre de la pièce : 600 - mmDiamètre de l’engrenage : 520 mmVitesse de rotation Entraînement Pas de vitesse : U/minPuissance totale requise : 2 x 1,1 kWPoids de la machine env. : 2300 kgDimensions de la machine env. : mm

current capacity: 25 kVAnumber of controlled axis: 6 workpiece weight: 10 kgweight of the machine ca.: 1,55 tYear of construction 2020 demonstration machine, as newEasy ARC 01.02 FD-B6 Welbee P500L welding robot stationMIG / MAG / water-cooled / torch RTW5000H / welding robot type FD-B6with welding table 2000x1200mmHole diameter 28 mmThe mobile welding cell for the craft businessSetting range MIG / MAG 20 - 500 ASteplessly adjustable switching levelsDuty cycle at max.current 40 ° C 50%Current at 100% ED 40 ° C 410 AWire feed speed 0 - 22 m / min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spécifications: - Capacité de charge max. 5000 kg - Diamètre de serrage max. 1800 mm - Dimensions de la plaque frontale 1200 x 1200 mm - Mouvement rotatif electr. Variable à l’infini - Droite + Gauche – Courir - E. - Télécommande - Transmission du courant de soudage env. 650 A - Entraînement 400 V / 2,2 kW - Encombrement approximatif L 1500 x H 1650 x P 1300 mm - Poids env. 2500 kg

table length: 2400 mmtable width: 1200 mmtable height: 200 mmweight of the machine ca.: 1,0 tThe table Professional 750 Article no. 4-280030.PD 2400x1200x200 mm has a diagonal hole arrangement on the table top and a parallel hole arrangement in 50 mm grid on the sides.The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N.Grid lines at a distance of 100 mm make it easier for you to set up your device.The welding tables are provided with scale as standard.Including 4x feet Basic equipment 650 Article no. 280858.XThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mmtable width: 1000 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 0,73 tdimensions: 2,0 x 1,0 x 0,9 mWelding table SIGMUND Professional 750 + Plasma-nitridedis made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers.The table has a material thickness of approx. 24.5-27mm.The holes have a diameter of 28mm.Hole arrangement in 100 mm grid on the table topparallel hole arrangement in 50 mm grid on the sides.Incl. Foot basic equipment. Pictured accessories optional.Price indication plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mmtable width: 800 mmtable height: 840 - 890 mmweight of the machine ca.: 0,3 tWelding table / perforated table:Hole diameter: 28mmThe table is made of 15mm thick, high-alloy steel S355 JR T = 15The surface is untreated.Sidewalls 165mmheight adjustable from approx. 880 - 980mmRibbed underside for reinforcement.including floor storageAccessories optional Surface flatness 0.2 - 0.4mm on 1000mm.The table can be moved with a pallet truck.Pallet truck is not included in the scope of delivery The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mmtable width: 1000 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 0,74 tdimensions: 2,0 x 1,0 x 0,9 mProduct description- High quality steel S355J2+N + plasma nitriding- Material thickness approx. 17 – 19 mm- Bore Ø 22 mm- Holes surface 100x100 mm grid- Rounded corners, edges and holes- Height of side panel 150 mm- Hole spacing in side cheeks 50 mm- Including scaling on the surface- Construction reinforced with ribs- Grid lines enable precise setups- Special equipment for welding tables is available on request.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

courant de soudage : 10 - 200 AFréquence de charge connectée : 230 VPoids : 16 kgDimensions (LxlxH) : 600 x 300 x 400 mmPoste à souder TIG, la livraison comprend- Pince de terre 300 A avec câble de soudage de 1,5 mètre- Porte-électrode à l’italienne 200 A avec câble de soudage de 2 mètres- Sangle de transport

longueur : 0 mmhauteur : 0 mmpuissance totale requise : kWpoids de la machine env. : 0,8 tdimensions de la machine env. : mMachine de soudage par ultrasons pour articles en plastique

table length: 2400 mmtable width: 1200 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 0,74 tdimensions: 2,4 x 1,2 x 0,9 mWelding table SIEGMUND Professional 750 + plasma nitridedis made of high quality steel S355J2+N and is plasma nitrided.Surface hardness max. 750 Vickers.The table has a material thickness of approx. 17 - 19.0 mm.The holes have a diameter of 22 mm.Hole arrangement in a 100 mm grid on the table top,Side panels 150mm with parallel hole arrangement in a 50mm grid.Incl. basic foot equipment. Table height 850mmPrice plus packaging and transport.Other dimensions available.The accessories shown are not included in the scope of delivery.Optionally available.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 106 Positionenweight: 283 kgcondition: neu : 28 mmSet. 4: 110 pieces 28mm system, consisting of:Ferrules: 14 x 280610.NFerrules: 10 x 280630.NPrism: 6 x 280648.1.NBolt: 30 x 160511Magnetic bolt 8 x 280740Stop: 10 x 280410.NStop: 10 x 280420.NStop: 4 x 280430.NAngle: 8 x 160110.NAngle: 2 x 280152.NAngle: 2 x 280162.NAngle: 1 x 280164.NAngle: 1 x 280165.NAngle: 1 x 280166.NAngle: 1 x 280167.NTrolley: 1 x 280910Accessory set. 1 x 283999Price information plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.