Voir les détails
Parpas Diamond linear Fraiseuses à portique et à portique mobile
d’occasionVendeur vérifié
1 / 2
Caractéristiques techniques
· ID 170394630Fraiseuses à portique et à portique mobile
- État
- d’occasion
- Année de construction
- 2013
- Emplacement
- Allemagne
Identifikation
FabricantParpas
ModèleDiamond linear
Technik
Quantité1
Paramètre technique 12200mm
Paramètre technique 21500mm
Paramètre technique 31000mm
Description
Description, subject to prior sale.
CNC 5-axis gantry milling machine with high dynamics
Manufacturer: Parpas
Type: Diamond linear
Year of manufacture: 2013, Acceptance: 2014
Control: Heidenhain iTNC530
X (longitudinal travel): 2200 mm (+330)
Y (transverse travel): 1500 mm (+330)
Z (vertical travel): 1000 mm
Distance between uprights: 2700 mm
Max. distance between table surface and spindle tip
with mounted milling head 1220 mm
Linear axis feed speed:
X and Y axis 0-60 m/min
Z-axis 0-40 m/min
Table surface: 2300 x 1600 mm
Max. weight with optimal distribution: 6000 Kg/m2
T-slots 22 mm, distance between T-slots 200 mm.
5-axis orthogonal milling head with electrospindle
Max. spindle speed 20,000 min-1
Spindle cone HSK 63 A
A-axis ±105° (torque 830 Nm),
C-axis ± 370° (torque 1200 Nm)
42 Stations Tool Changer
Tool holder HSK 63A-100
Max. tool∅ 80mm
Max. tool length 350 mm
Max. tool weight 8 kg
Tool coolant supply through the spindle with
Paper filter device, 20 bar 25 L/min.
Compressed air and water through the spindle center
M&H Infrared Probes
Blum Laser Measuring System
Rinsing gun
Portable Handwheel HR520 Heidenhain
Complete 3D machining, simultaneous or permanent
Finishing
2 chip conveyors
Control cabinet with air conditioning
Machine does not need a foundation.
Thermal insulation and stabilization
Sunroof for loading and unloading.
All linear axes X, Y, Z are controlled by means of cooled
Digital motors moves.
The linear axes X, Y, Z are equipped with coded glass scales
from Heidenhain. On the C-axis is a
Angle measuring system from Heidenhain.
Machine can be viewed working under power.
Further information, videos and photos on request.
If you are interested in the zero-point clamping system, this can be done with
. Automation NPS 2000 x 1400 with 50
mm raster. What is meant by this ? NPS is the
Zero-point clamping system. The grid shows length x width.
Divided into 50 mm spacing. This means that all 50
mm there is the possibility of a workpiece in the grid
of the zero-point clamping system. A 50 mm
Grid is already very good. Often the grids of a
Zero-point clamping system coarser. The finer, the lighter the
to place the holder on a workpiece. And it
can thus also pick up smaller workpieces
. E.g. Many parts on the milling table, which
can be processed "simultaneously".
Technical data, errors excepted.
CNC 5-axis gantry milling machine with high dynamics
Manufacturer: Parpas
Type: Diamond linear
Year of manufacture: 2013, Acceptance: 2014
Control: Heidenhain iTNC530
X (longitudinal travel): 2200 mm (+330)
Y (transverse travel): 1500 mm (+330)
Z (vertical travel): 1000 mm
Distance between uprights: 2700 mm
Max. distance between table surface and spindle tip
with mounted milling head 1220 mm
Linear axis feed speed:
X and Y axis 0-60 m/min
Z-axis 0-40 m/min
Table surface: 2300 x 1600 mm
Max. weight with optimal distribution: 6000 Kg/m2
T-slots 22 mm, distance between T-slots 200 mm.
5-axis orthogonal milling head with electrospindle
Max. spindle speed 20,000 min-1
Spindle cone HSK 63 A
A-axis ±105° (torque 830 Nm),
C-axis ± 370° (torque 1200 Nm)
42 Stations Tool Changer
Tool holder HSK 63A-100
Max. tool∅ 80mm
Max. tool length 350 mm
Max. tool weight 8 kg
Tool coolant supply through the spindle with
Paper filter device, 20 bar 25 L/min.
Compressed air and water through the spindle center
M&H Infrared Probes
Blum Laser Measuring System
Rinsing gun
Portable Handwheel HR520 Heidenhain
Complete 3D machining, simultaneous or permanent
Finishing
2 chip conveyors
Control cabinet with air conditioning
Machine does not need a foundation.
Thermal insulation and stabilization
Sunroof for loading and unloading.
All linear axes X, Y, Z are controlled by means of cooled
Digital motors moves.
The linear axes X, Y, Z are equipped with coded glass scales
from Heidenhain. On the C-axis is a
Angle measuring system from Heidenhain.
Machine can be viewed working under power.
Further information, videos and photos on request.
If you are interested in the zero-point clamping system, this can be done with
. Automation NPS 2000 x 1400 with 50
mm raster. What is meant by this ? NPS is the
Zero-point clamping system. The grid shows length x width.
Divided into 50 mm spacing. This means that all 50
mm there is the possibility of a workpiece in the grid
of the zero-point clamping system. A 50 mm
Grid is already very good. Often the grids of a
Zero-point clamping system coarser. The finer, the lighter the
to place the holder on a workpiece. And it
can thus also pick up smaller workpieces
. E.g. Many parts on the milling table, which
can be processed "simultaneously".
Technical data, errors excepted.
Demander des informations sur cette machine
Votre demande est transmise directement au vendeur de cette machine.
