Ponceuses à bande (29)

Key data: 1100 mm

Ponceuse à bande large DMC Polisand 110 RP Année 1998 Ponceuse à bande large Varnish puissance totale installée env., 23 KW Largeur de ponçage 1100 mm Épaisseur de la pièce jusqu’à environ 170 mm Positionnement motorisé en hauteur avec lecteur numérique Bande de transport par le vide, unité d’aspiration F,LLI FERRARI avec puissance du moteur 4 KW Puissance du moteur d’alimentation 1,50 KW Agrégat 1 : rouleau de ponçage en caoutchouc rainuré, avec ventilateurs Agrégat 2 : patin de ponçage, avec ventilateurs Les deux groupes sont entraînés par un moteur de 15 KW 380 V / 50 Hz poids 2300 Kg Dimensions : 2,45m x 1,85m x 2,0m

Hauteur de débit : 180 mm Auction-ID: A1-50090-96

Petite ponçeuse fonctionnant en 380V tri. Livrée avec 26 bandes abrasives pour le métal (abrasif: borazon) , pour le satinage de l'inox et pour le bois. Table coulissante, réglable en hauteur manuellement (dimensions: 170 x 65 cms). Dimensions des bandes: 4200 x 150 mm. Machine livrée avec: 10 bandes 3M neuves grain 150 pour bois ou alu (valeur environ 350.-€ H.T.) pour le satinage de l'inox: 1 bande neuve, couleur verte 2 bandes quasi neuve, couleur bordeaux 1 bande quasi neuve, couleur grise pour le ponçage de l'inox (abrasif borazon 3M): 6 bandes grain 40, partiellement usagées 4 bandes grain 80, partiellement usagées 2 bandes grain120, partiellement usagées.

Avec plusieurs bandes de ponçage variées Auction-ID: A1-50226-58

Key data: 150 mm, 7800 mm

Ponceuse à longue bande Johansen

Utilisé et non vérifié ; visionnement souhaité Auction-ID: A1-50737-75

Ponceuse à courroie de banc Höfer Motor 4.2KW format 2.50 x 1.20 mètres

Number of sanding units: 6 St.sanding width: 180 mmSanding height max.: 150 mmSTAEHLE Grinding Machine Type Gloria/Saturn E 180 RF-----------------------------------------Stähle Hess Finish Grinding Machine Type Saturn E 180 RF (formerly Gloria)with 2 grinding units, plus top and bottom Roto Finish grinding attachments.1 upper grinding belt1 lower grinding belt2 upper Roto Finish grinding attachments2 lower Roto Finish grinding attachmentsFor a detailed description, please see the accompanying PDF from the manufacturer.Sold on behalf of a customer.The images are from our archive and were taken before the machine was delivered to the customer.(Technical specifications according to the manufacturer - without guarantee!)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SPÉCIFICATIONS: Puissance installée : 5,5 kW 2 volants d’inertie Ø 450 mm Longueur de la bande de ponçage: 4900 mm 2 réglages de vitesse

Touret à brosse pour l'ébavurage de tubes, profilés et pièces métalliques plates. 2 vitesses, rotor équilibré sur roulements, raccord d'aspiration arrière, large carter de protection.État : Neuf, jamais utilisé, dans sa caisse d'origine.Caractéristiques (fiche optimachines.com) :• Alimentation électrique : 400 V• Puissance moteur : 1,3/1,8 kW• Diamètre de brosse : 250 mm• Largeur de la brosse : 40 mm• Alésage de brosse : 25 mm• Vitesse de rotation de brosse : 1450/2850 tr/min• Diamètre tubulure d'aspiration : 50 mm• Dimensions (L x l x h) : 415 x 476 x 356 mm – poids net 36 kgLivré avec : Meule brosse épaisseur de fil 0,35 mm.Format de la caisse : 52 x 47 x 46 (cm) Auction-ID: A1-50698-15

Réf.: 0021 Marque: BOHR - AUSTRIA Modèle: 150/330 Tampon de ponçage pour ponceuse à bande Tampon de ponçage universel pour ponceuses à bande en graphite pour bois massif et placage - mm 330 x 150 Dimensions hors tout mm 330 x 150 x 100 h Poids kg 4

Ponceuse combinée bande et disque pour le ponçage et l'ébavurage du bois tendre ou dur. Bras de ponçage inclinable de 0 à 90°, table pivotante 0–45°, bâti en fonte grise.État : Neuf, jamais utilisé, dans son carton d'origine.Caractéristiques (fiche optimachines.com) :• Alimentation électrique : 230 V• Puissance moteur : 0,37 kW• Largeur de bande : 100 mm• Diamètre disque de ponçage : 150 mm• Vitesse de défilement : 7,35 m/s• Diamètre tubulure d'aspiration : 63 mm• Dimensions (L x l x h) : 460 x 360 x 280 mm – poids net 16,5 kgLivré avec : Butée angulaire de -60° à + 60°, Bande abrasive de grain 80 (dimensions 915 x 100 mm), Disque abrasif autocollant de grain 80 (diamètre 150 mm).Format du carton : 56 x 28 x 32 (cm) Auction-ID: A1-50698-3

A vendre ponçage d’occasion maschine steinemann. Papier de haut en bas, super large, 200kw. 1990 yc. Court utilisé.

Pour les sols en bois, avec bande de ponçage et extraction Auction-ID: A1-50251-509

CARACTÉRISTIQUES TECHNIQUES: Machine à rectifier à bande horizontale Largeur de table mm : 800 Longueur de la table mm : 2.900 Largeur de bande abrasive mm : 1.500 Longueur de bande abrasive mm : 8.000 Hauteur de travail maximale mm : 600 Puissance du moteur principal HP : 4 Avec une chaussure abrasive

Number of sanding units: 6 st.sanding width: 45-165 mmSanding height max.: 45-92 mmweight: 2200 kgEcoline Q-SAND 6For sale on behalf of a customer--------------------------------------------Full text as PDF attachment!Short description:Machine with infeed conveyor and automatic height detection.It has two grinding discs on top and two grinding discs on the bottom, each connected to a brush unit.Technical manufacturers description:Ecoline Q-Sand: the ideal grinder for squared timber and more.Designed to work on both sides of the workpiece with three-dimensional adjustment, the Q-Sand guarantees maximum precision and uniformity. It is equipped with grinding discs, flap brushes, and a double disc for more effective material removal, thus improving adhesion for subsequent treatments. The Q-Sand can be installed in a production line or, due to its complete operational autonomy, can also be us ...

Rectifieuse à ruban pour bois et métal, distance des rouleaux env. 3000 mm

Number of sanding units: 4 Stsanding width: 190 mmSanding height max.: 4-180 mmweight: 4200 kgHess Expert 4-belt single wood sanding machinemachine will be checked by our technicians--------------------------------------Ø Grinding at the bottom/topØ With 2 offset grinding units each (bottom and top)Ø Grinding units (bottom and top) connected in series according to theDressing principleØ Pre-sanding with coarse grit (calibrate)Ø Regrinding with fine grit (finish)Ø Central motorized height adjustment of the lower grinding unitsØ Central motorized and synchronous height adjustment of the entire upperGrinding and brushing units including the upper transport unitsØ Oscillating sanding belt utilization (during the sanding process)Ø Absolute power connection thanks to 5.5 KW motors and large dimensionsdrive drumsØ Oxide ceramic grinding shoe for- exact surface geometry- no adjustment  ...

Number of sanding units: 2 st.sanding width: 180 mmSanding height max.: 150 mmMAWEG Robert Hildebrand Saturn DuoProfessional two-belt finish sanding machine with brushing unitDouble-sided, sands from top and bottomPneumatic belt oscillationPneumatic belt tensioningFeed via top and bottom conveyor belts with spring-loadedhold-down rollers, infinitely variable speed (5–15 m/min)Workpiece thickness adjustment with pre-selectable stock removal amount atmachine infeed, based on sensing the raw timber thicknessAdjustment to wood thickness via motorized positioning of themachines upper sectionDigital thickness setting via mechanical counter with 0.1 mm display andzero-point adjustmentSafety switch for oversized wood thickness at machine infeedDouble-sided brushing unit with integrated workpiece blow-offSanding belt blow-off (top and bottom)Belt breakage monitoring switch with automatic shutdo ...

Number of sanding units: 2 st.sanding width: 190 mmSanding height max.: 4-150 mmHess Junior single wood sanding machine--------------------------------Machine in checking process at the moment!Basic structure:Stable, heavy welded construction made of thick-walled rectangular hollow profiles with additional, statically calculated reinforcements for optimalVibration dampening.Staggered grinding units with large dimensionsBelt drive drums for slip-free belt running. Two-point suction for directand airborne dust extraction with integrated blow-off device. grinding unitsin heavy steel plate construction as the basis for vibration-damped,quiet tape running. All guides as a ball linear set on hardened andpolished waves. Permanent precision thanks to dust and dirt protectionthe ball linear sets. Contact roller and sanding pad in a balanced ratiofor sanding belt grain load. The large-sized drive  ...

Number of sanding units: 2 st.sanding width: 190 mmSanding height max.: 4-180 mmHESS - GLORIA 2 BELT SINGLE WOOD SANDING MACHINE-----------------------------------------------------Manufactur ers description:-----------------------------------------------------Compa ct design designed according to modern principles. Quiet andvibration-free operation thanks to rigid, stable machine housing andspecial insulation. Work safety device in accordance with the EC Machinery Directive with the dust-tested certificate.Offset grinding units with large-dimensioned tension rollers forgood heat dissipation and stable sanding belt guidance. Sanding units withforced sanding belt oscillation. 2-point sanding dust extraction directlyon the sanding roller. Airborne dust extraction on the large tension rollers. Integratedsanding belt blower for longer service life of the sanding belts. Integrated brushing an ...

Number of sanding units: 4 St.sanding width: 190 mmSanding height max.: 180 mmControl: ja weight: 3300 kgDimensions (L/W/H): 2600x920x1890 mmDust suction hood: 2x180, 2x120 mmLöwer DSM 2004 Double-Sided Sanding Machine---------------------------------------------4-Belt Sander + Disc Unit (Top/Bottom)Manufacturers Description:--------------------------------------------- Double-sided, four-belt, single-wood sander for sandingsolid wood such as window frames, etc.Highly stable, top-quality design with innovative details. Suitable for highcontinuous loads, even with high material removal rates.- Sequentially arranged grinding units for roughing, fine grinding,and finishing, each from above and below1. Belt grinding unit with heavy steel roller2. Belt grinding unit with rubberized roller and shoe3. Finishing unit with fiber brush (see optional equipment below)- Direct-drive grinding rollers ...

Number of sanding units: 8 St.sanding width: 25-240 mmSanding height max.: 15-140 mmB ROBA Fentech, Fully automatic sanding machineDesigned for sanding individual wooden components in window manufacturing, it is suitable for the following applications:- Fine sanding of wood- Sanding after impregnation- Intermediate lacquer sandingAdvantages of the ROBA Fentech system:- Automatic workpiece detection via scanner at the machine infeed- Motorized positioning of sanding units- Oscillating side units optimize abrasive utilization- 400 mm diameter sanding tools optimize sanding quality- Angled profiles are sanded at their optimal angle- Can be used as a straight-through machine or in reversing mode for one-person operation- Vacuum transport system for processing short parts- Enclosed design for enhanced workplace safety and a dust-free environment- Compact, space-saving design- Freely selectabl ...

Number of sanding units: 10 St.sanding width: 25-240 mmSanding height max.: 15-140 mmMB ROBA Fentech ORBITAL, fully automatic sanding machineDesigned for sanding individual wooden components in window manufacturing, it is suitable for the following applications:- Fine wood sanding- Impregnation sanding- Intermediate lacquer sandingAdvantages of the ROBA Fentech principle:- Automatic workpiece detection via scanner at the machine infeed- Motorized positioning of sanding units- Oscillating side units optimize abrasive utilization- 400 mm sanding tool diameter optimizes sanding quality- Angled profiles are sanded at their optimal angle- Can be used as a through-feed machine or in reversing mode for one-person operation- Vacuum transport system for processing short parts- Enclosed design for enhanced workplace safety and a dust-free environment- Compact, space-saving design- Freely selectabl ...

Number of sanding units: 4 st.sanding width: max. 200 mmSanding height max.: 7-150 mmWorking speed: 8-16 m/minBand Speed: 18-30 m/secStähle-Hess Sanding Machine Saturn-Duo-----------------------------------------------Manufacturers Technical Description:Stähle-Hess Finish Sanding Machine, Model Saturn DuoFeaturing 2 sanding units, plus additional upper and lower Roto-Finishsanding units.1 Upper sanding belt1 Lower sanding belt2 Upper Roto-Finish sanding units2 Lower Roto-Finish sanding unitsWorkpiece DimensionsHeight: 7–150 mmWidth: max. 200 mmMinimum length: 300 mmBelt speed: 18–30 m/s (variable)Feed rate: 8–16 m/min (variable)-----------------------------------------------Price for the above-mentioned machine available upon request!-----------------------------------------------Note: This machine was previously used in conjunction with aWeinig Variomat four-sided planer/moulder ...

Number of sanding units: 2 st.sanding width: 300 mmSanding height max.: 300 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Largeur des bandes : 75 mmLongueur de la bande : 2000 mmVitesse de la bande : 37 m/minPuissance totale requise : 3 kWPoids de la machine env. : 0,084 tDimensions de la machine env. : 1x0,5x1 m

largeur des bandes : 75 mmlongueur de la bande : 2000 mmvitesse de la bande : 37 m/minpuissance totale requise : 3 kWpoids de la machine env. : 0,11 tdimensions de la machine env. : 1x0,5x1 m

Number of sanding units: 1 st.sanding width: 150 mmSanding height max.: 150 mmLoewer edge finishing machine MiniSpin NMachines for finishing and fine sanding ofEdges and profiles with a grinding spindlehorizontal or vertical.Motor 0,75 KWSpindle in vertical position for machining edgesPivoted spindle in horizontal position, laterallyetc. for processing longer profile bars orConjunction with a combined grinding head for grindingof edges with a grinding disc bladesGrinding head swiveling + / - 20 ° for editingoblique linesWorking height / width 150 mmmax. Diameter roller / brush