scies machines d'occasion à vendre (1,263)

Diamètre du rouleau : 388mm Plage de coupe 90° : 320 mmSurface de coupe 90° à plat : 460 x 300 mmSurface de coupe 90° carré : 320 x 320 mmCapacité de coupe en faisceau : de 200 x 50 mm à 450 mm - 280mm Plage de coupe à 45° : 320 mmPlage de coupe 45° à plat : 300 x 300 mmSurface de coupe 45° carré : 300 x 300 mmSurface de coupe 30° rond : 200mm Plage de coupe 30° à plat : 200 x 300 mm Plage decoupe 30° carré : 200 x 200 mmDimensions de la lame de scie : 34 x 1,1 x 4120mm Vitesse de la bande : 17 - 110 m/min avec convoyeur à rouleaux, longueur : environ 6000mm Référence : Wowi - Lot 71 Auction-ID: A7-49056-193

Veuillez noter ! Hors service Auction-ID: A1-48474-6

Fonction : Cette machine est conçue pour la coupe précise et les coupes en onglet et possède une unité de scie pivotante et inclinable, incluant des accessoires comme des lames de scie de rechange Auction-ID: A1-49201-29

Auction-ID: A1-48474-53

Détails techniques Fabricant : ZMM Vratsa Type : Scie à ruban métallique horizontale Configuration : - Alimentation hydraulique de la proue de la scie - Cylindres de serrage hydrauliques doubles - Étau à machine réglable - Support du matériau des rouleaux - Système d’alimentation hydraulique - Tête de scie entraînée par engrenages - Système de liquide de refroidissement - Tableau de contrôle électrique Application : - Découpe de barres en acier - Coupe de tuyaux et de tubes - Découpe de sections en acier structurel - Fabrication générale des métaux Construction : - Cadre en fonte robuste - Système de découpe automatique hydraulique Dimensions : - Longueur : environ 2600 mm - Largeur : environ 1800 mm - Hauteur : environ 1700 mm Poids : Environ 1800 kg État : Utilisé Condition observée : - La machine semble mécaniquement complète - Des vérins de serrage hydrau ...

Numéro de machine : 693601Longueur de lame : max. 3320 mmLongueur de lame : minimum 3120 mmDimensions de la table : 500 x 500 mmincluant la soudeur à lame de scie et la pierre à aiguiserRéférence : Walter - Lot 85 Auction-ID: A7-48268-13

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 29800 €: 569.18 €: Doppelsäulenführung : 5400x41x1,3 mm: 20-100 m/min: 450 mm: 425 mm: 695 x 425 mm: rund 430 mm, quadrat 425 : rund 320 mm, quadrat 290 : 690 mm: 0.55 kW: 4 kW: 0.12 kW: 3090 mm: 1200 mm: 1940 mm: 1630 kgdouble linear guideshydraulic-mechanical bandtensionsaw bandbrushinfinitely variable cutting speedsensitive cut regulationbi-metal saw band 41coolant devicethermal overload protectionheavy duty gearoptical height adjustment3 ° inclined bandhydraulic clamping of the viceuser manual in GERMAN or ENGLISHOPTIONS: hydraulic vertical clamping micro cooling unit chip conveyer laser cutting lineThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Numéro de machine : 161000228Tension de fonctionnement : 400 VFréquence : 50 HzConnexion : 1100 WVitesse : 4100 tr/min Plage de rotation 90° à 45° à gauche et 90° à 0°à droite Diamètre de la lame de scie : 280 m Vitesse de la lame de scie : 3200tr/min, incluant guide longitudinal numérique avec contrôle du fabricant HECHT, ainsi qu’un convoyeur à rouleaux de chaque côté, largeur : 90mm Référence : STS - Lot 4 Auction-ID: A7-49056-246

Piano de travail basculant 600×600 mm Hauteur de coupe : 240 mm Vitesse variable de la pale Unité de soudage à lame intégrée Dimensions : 975x748x1850 mm Poids : 350 kg Auction-ID: A7-49136-7

Équipé d’une butée de longueur numérique Hiddink avec commande tactile Siemens Simatic, piste d’alimentation L 550cm, piste L de décharge 470cm Auction-ID: A1-48457-23

: neu : ca. 10 Wochen ab Auftrags : Italien : 17770 €: 341.18 €: Schwenkrahmen : 3010x27x0,9 mm: 35/70 (PLC) m/min: 20-100 (CNC/Touch) m/min: 260 mm: 240 mm: 330x120 mm: rund 200 mm, quadrat 190 : rund 120 mm, quadrat 115 : 220 mm: 835 mm: 0.37 kW: 0.12 kW: 2800 mm: 2050 mm: 1900 mm: 1090 kgVERSION PLC: adjustment of material feed by handwheel, counter and limit switchVERSION CNC:feed lenght and numbers by CNC (99 progamms)VERSION TOUCH: as CNC but with 7", touchscreen for easier operationautomatic cutting cycle clamping, saw blade and cutting fluid on, cutting operation, saw blade and cutting fluid off, fast return stroke, declampautomatic feed: PLC 800 mm/stroke, CNC/Touch: 600 mm/strokevariable cutting pressure.Machine with 2 cutting speeds (PLC) orspeed variator (CNC/Touch)cutting fluid systemautomatic saw blade breakage detectionhydraulic vicesmaterial chutechip brushsugge ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 11100 €: 213.12 €: Schwenkrahmen : 3660x27x0,9 mm: 20-100 m/min: 320 mm: 300 mm: 320x300 mm: 640 mm: 0.37 kW: 2.2 kW: 0.12 kW: 1900 mm: 850 mm: 1300 mm: 770 kgRoller material feed with manual adjustable length stop with limit switchblade brushcontrol panelheight adjustment bar with limit switchhydromechanical blade tensioninverterhydraulic vicecoolant pumpsaw bladesecurity switch1,2 meter roller tableusers manual in GERMAN or ENGLISCHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Numéro de machine : 3356/13Tension de fonctionnement : 400 VFréquence : 50 HzCourant nominal : 4 ADiamètre de la lame de scie : 300 mm Auction-ID: A7-49089-369

Numéro de série : 10,002 PKTaille de la table : 710 x 900mm Diamètre de la lame : max. 250mm Alésage de la lame : 20 mm Vitesse du moteur : 2800 tr/min Vitesse de l’arbre de scie : 3800 tr/minHauteur de coupe à 90° : 82 mmHauteur de coupe à 45° : 55 mmPuissance moteur : 3,1 kWTension : 220/240 VFusible : 16 ARéférence : Wowi - Lot 52 Auction-ID: A7-49056-190

Diamètre de la lame de scie : environ 400mm Dimensions de la table : 3000 x 600mm avecrouleaux intégrés Largeur du convoyeur à rouleaux : 600 mm Auction-ID: A7-49089-519

Numéro de machine : 20007Diamètre de la lame de scie : environ 250mm Largeur de serrage : 120 mm Auction-ID: A7-49089-267

Tension de fonctionnement : 230 VFréquence : 50 HzVitesse : 54 tr/min Diamètre de la lame de scie : 250 mm Auction-ID: A7-49089-479

Numéro de machine : 9000293Tension de fonctionnement : 380 VFréquence : 50 HzVitesse : 40 - 80 tr/min Diamètre de la lame de scie : 250 mmLargeur du convoyeur à rouleauxinclus : 260mm Référence : Option - Lot 3 Auction-ID: A7-49056-70

cutting diameter: 325 mmcapacity 90 degrees: flat: 500 x 300 mmcapacity 90 degrees: square: 325 x 325 mmcutting speed: 35 / 70 m/mincapacity 45 degrees: round: 300 mmcapacity 45 degrees: square: 300 x 300 mmcapacity 60 degrees: round: 200 mmcapacity 60 degrees: flat: 200 x 200 mmcapacity 60 degrees: square: 200 x 200 mmsaw band length: 4200 x 27 x 0.9 mmwork height max.: 750 mmtotal power requirement: 2,2 kWweight of the machine ca.: 1.300 kg.range L-W-H: 2230 x 2100 x 1280 mm Original price approx. 35.000 - 40.000 euros Special price upon request Machine from a workshop for people with disabilities Features:- Robust electro-hydraulic band saw - FULLY AUTOMATIC With manual miter adjustment- Continuously variable hydraulic adjustment of clamping pressure- Control switch for manual functions- Single/multiple stroke selectable- Single cuts possible - 2x hydraulic vertical clamps (bundle cl ...

Course : 30 mm, vitesse : 0 - 2900 / min, profondeur de coupe maximale : environ 305 mm, consommation électrique : 1200 W, dans le boîtier d’origine Auction-ID: A7-48794-480

cutting diameter: 250 mmsaw band length: 3600 mmcutting width: 300 mmcapacity 90 degrees: round: 250 mmcapacity 90 degrees: flat: 250 x 300 mmcapacity 90 degrees: square: 250 x 250 mmcutting speed: 20 - 100 m/mintotal power requirement: 2,05 kWweight of the machine ca.: 720 kgMetal Band Saw - Fully AutomaticFeatures:- Manual stop with limit switch- Hydraulic clamping vise- Control panel- Stepless adjustment of band speedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 420 mmsaw band length: 0 mmcutting width: 0 mmtotal power requirement: kWweight of the machine ca.: 1 tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 260 mmsaw band length: . mmcutting width: . mmweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 400 mmband length: 680 mmstroke: . mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mwith contents see photosThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 260 mmband length: 480 mmstroke: . mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mwith contents see photosThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 420 mmsaw band length: 5.800 mmcutting width: 540 x 420 mmheight of material-table: 830 mmdimensions of saw-band: 5800 x 38 x 1,3 mmmitre joint cuts -/+ degrees: 90 - 45 cutting speed: 17 - 110 m/minpower capacity: 5,5 kWvoltage: 400 Vcoolant: total power requirement: kWweight of the machine ca.: 2,4 tdimensions of the machine ca.: 3,40 x 1,40 x 2,30 m- Fabr.No.: 590218- mitre cutting 85°/-15°- material bundle clamping- material feed by motor driven transport roll with hydraulic elevation- chip conveyor- coolant equipment- machine lampThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 1060 mmsaw band length: 11.430 x 80 x 1,6 mmcutting width: 1,6 mmcutting range: 1060x1260 mmControl: CNC cutting speed: 12-90 m/minpower capacity: 11 kWtable load: 20 tCutting Length max.: 6100 mmtotal power requirement: 20 kWweight of the machine ca.: 21,1 tdimensions of the machine ca.: mAutomatic feed length 2,100 - 6,100 mmThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus  ...

cutting diameter: 280 mmsaw band length: 4200 mmcutting width: 280 x 280 mmdimensions of saw-band: 4200 x 34 x 1,1 mmcutting speed: 18 - 115 m/minmultiple feeding: 0 - 6000 mmpower capacity: 3,0 kWcoolant: voltage: 400 Vtotal power requirement: 5,0 kWweight of the machine ca.: 2,3 tdimensions of the machine ca.: 2,35 x 2,40 x 2,00 m- serial-no.: 6082- control: SIEMENS COROS - OP 15- chip conveyor- multiple feeding- coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 400 mmcutting diameter: 130 mmstroke: 135 mmmitter cutting - all-position: 0-45 °turning speed range: 1420 / 2840 U/mincapacity 45 degrees: square: 110 mmcapacity 45 degrees: flat: 50 x 240 mmcapacity 90 degrees: flat: 95 x 240 mmcapacity 90 degrees: round: 130 mmcapacity 90 degrees: square: 120 mmvoltage: 400 Vtotal power requirement: 3,7 / 4,5 kWweight of the machine ca.: 600 kgdimensions of the machine ca.: 1,15 x 1,20 x 1,60 m- Serial-No.: 102752- cutting range round 130 mm- cutting range square 120 mm- cutting range flat 95 x 240 mm- vertical pneumatic clamping The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 400 mmcutting diameter: 130 mmstroke: 150 mmmitter cutting - all-position: +90°/-90° °cutting speed: 10/20 m/minvoltage: 400 Vfeed speeds infinitely variable: 0 - 1000 mm/mintotal power requirement: 3,4 kWweight of the machine ca.: 840 kgdimensions of the machine ca.: 1,10 x 0,9 x 1,50 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.