scies machines d'occasion à vendre (1,307)

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 104600 €: 1976.94 €: Doppelsäulenführung : 10430x54x1,6 mm: 20-100 m/min: 750 mm: 1300x700 mm: rechteck 850 x 750 mm : rechteck 570 x 750 mm : rechteck 850 x 750 mm : 930 mm: 4 kW: 11 kW: 0.12 kW: 5500 mm: 2280 mm: 3400 mm: 8500 kgHydraulic viceDigital display for angle indicationHydraulic saw arm clampingManual saw arm rotationContinuously adjustable saw arm lowering speedAutomatic saw frame lifting after cuttingSensitive cutting pressure regulation depending on material propertiesHydromechanical blade tension readable via pressure gaugeMobile control panelHeavy-duty, helical-toothed conical gearDriven chip brushBlade guidance via carbide plates and rollersAutomatic blade breakage protectionCoolant systemHydraulic saw frame liftingOperating instructions in GERMAN or ENGLISHOPTIONS:Roller tables and band saw blades on requestThe data fo ...

: neu : ca. 4 Monate ab Auftragse : Türkei : 53900 €: 1018.71 €: Doppelsäulenführung : 7000x41x1,3 mm: 15 - 120 m/min: 560 mm: 540 mm: 810 x 530 mm: rund 520 mm, quadrat 520 : rund 520 mm, quadrat 520 : rund 330 mm, quadrat 330 : 875 mm: 1.1 kW: 4 kW: 0.12 kW: 3850 mm: 1700 mm: 2450 mm: 3400 kghydraulic vicedigital readout for scale of bending anglehydraulic clamping of sawing armturning of sawing arm by handcontinuously variable down speed of sawing armautomatic sawing frame lifting after cuttingsensitive cutting pressure adjustment subject to material conditionhydromechanic tape tension readout by manometermobile control panelangular geared conical heavy duty gear unitdriven chip brushtape guiding by hard metal sheet plates and rollsautomatic tape break lockcoolant equipmentHYDRAULIC UPLIFT OF SAWING FRAMEuser manual in GERMAN or ENGLISH(roller table see photo - optional avai ...

Diamètre du rouleau : 420 mm Gorge : 410 mm Longueur de bande de la scie : 3150 - 3260 Largeur de bande de la scie : 3-16 Poids : environ 600 kg Les données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.

cutting diameter: 290 mmsaw band length: 4000 x 27 x 0,9 mmtable height: -- mmcutting width: 300 mmband speed: 20 - 100 m/minload centre: 290 mmrotary disc high: 290 x 300 mmcapacity 45 degrees: round: 260 mmcapacity 45 degrees: flat: 280 x 240 mmheight of the workpiece: 1800 x 1900 x 1750 mmweight of the machine ca.: 2200 kg- Fully automatic electro-hydraulic band saw- electric feed unit - max. feed 520 mm- front control panel- electro-hydraulic material clamping- semi-automatic & automatic mode selectable- Miter cuts - Automatic operation up to 45° right- Miter cuts - Semi-automatic operation up to 60° right- stepless adjustment of the saw blade speedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 34400 €: 657.04 €: Doppelsäulenführung : 4380x34x1,1 mm: 20-100 m/min: 325 mm: 325 mm: 400x325 mm: rund 325 mm, quadrat 325 : rund 300 mm, quadrat 265 : rund 190 mm, quadrat 190 : 655 mm: 1.1 kW: 2.2 kW: 0.12 kW: 2130 mm: 2150 mm: 1650 mm: 1860 kgNC controldouble column band saw on linear guidelines3° cutting angleblade brushcontrol panelhydraulic feeding vicehydraulic vicehydromechanical blade tensioninginverteroptical height adjustmentproximity switch for sensing blade slippagematerial limit shaftpressure adjustmentcoolant pumpsaw bladesecurity switchuser manual in GERMAN or ENGLISHOPTIONS:hydraulic top clampingmicro coolant equipmentlaser cutting lineALTERNATIVE:model BMSO 325 CGS NC (with servo instead of hyraulic feed) € 38.900,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Türkei : 34400 €: 657.04 €: Doppelsäulenführung : 6000x41x1,3 mm: 20-100 m/min: 540 mm: 540 mm: 750x540 mm: rund 510 mm, quadrat 450 : rund 270 mm, quadrat 250 : 695 mm: 4 kW: 0.12 kW: 3000 mm: 1300 mm: 2150 mm: 2445 kghydraulic vicedigital readout for scale of bending anglehydraulic clamping of sawing armturning of sawing arm by handcontinuously variable down speed of sawing armautomatic sawing frame lifting after cuttingsensitive cutting pressure adjustment subject to material conditionhydromechanic tape tension readout by manometermobile control panelangular geared conical heavy duty gear unitdriven chip brushtape guiding by hard metal sheet plates and rollsautomatic tape break lockcoolant equipmenthydraulic uplift of sawing frame3° inclined saw banduser manual in GERMAN or ENGLISH(the vertical hydraulic clamping shown on the photos ist op ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 9210 €: 177.75 €: Schwenkrahmen : 3160x27x0,9 mm: 20-100 m/min: 270 mm: 270 mm: 340x220 mm: rund 230 mm, quadratisch : rund 150 mm, quadratisch : rund 180 mm, quadratisch : 910 mm: 0.37 kW: 1.5 kW: 0.12 kW: 1730 mm: 770 mm: 1460 mm: 476 kgDIGITAL ANGLE READ OUTblade brushcontrol panelswivel frameinfinitely adjustable lowering with hydraulic cylinderhydraulic lifting of the saw framequick lowering with automatic switchover to working speed using a sensor pinmech. Vice with quick clampingcoolant equipmentmachine basechip collecting trayuser manualin GERMAN or ENGLISHOPTIONS:Roller tables and band saw blades on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Türkei : 46700 €: 891.97 €: Doppelsäulenführung : 8200x41x1,3 mm: 20-100 m/min: 810 mm: 750 mm: 910x750 mm: rund 600 mm, quadrat 600 : rund 360 mm, quadrat 360 : 725 mm: 4 kW: 0.12 kW: 4020 mm: 1600 mm: 2450 mm: 3970 kghydraulic vicedigital readout for scale of bending anglehydraulic clamping of sawing armturning of sawing arm by handcontinuously variable down speed of sawing armautomatic sawing frame lifting after cuttingsensitive cutting pressure adjustment subject to material conditionhydromechanic tape tension readout by manometermobile control panelangular geared conical heavy duty gear unitdriven chip brushtape guiding by hard metal sheet plates and rollsautomatic tape break lockcoolant equipmenthydraulic uplift of sawing frameuser manual in GERMAN or ENGLISHOPTIONS: Hydraulic vertical clamping Micro cooling unit Laser linerThe data for  ...

cutting diameter: 410 mmsaw band length: 5800 x 41 x 1,3 mmtable height: 750 mmcapacity 90 degrees: flat: 700 x 410 mmcapacity 45 degrees: round: 410 mmcapacity 45 degrees: flat: 500 x 410 mmcapacity 45 degrees: round: links 410 mmcapacity 45 degrees: flat: links 430 x 410 mmcapacity 30 degrees: round: 320 capacity 30 degrees: flat: 320 x 410 : 15 - 150 m/minworkpiece weight: max. 250 kg/m kg: 5,5 kW: 3200 kg: 4500 x 2800 x 2000 mm- The ergonomic panel control can be networked and offers various optionsOption packages Teleservice for remote maintenance Setting sawing programs in the AV Import of sawing programs from CAD with DSTV interface and data export- Automatic material feed:- In a compact design for shorter sections or with flexible insertion tongsAvailable in almost all lengths- Exact positioning of the material using servo positioning technology- Pioneering electric saw feed with ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 38700 €: 739.17 €: Doppelsäulenführung : 8200x41x1,3 mm: 20-100 m/min: 810 mm: 810 mm: 850x810 mm: rund 480 mm, quadrat 480 : 585 mm: 1.5 kW: 4 kW: 0.12 kW: 3900 mm: 1200 mm: 2350 mm: 3080 kg2° inlined saw bandoptical height adjustmentlinear guidescontrol panelsecurity switchpressure adjustmenthydraulic vicechip brushhydromechanical blade tensioningcoolant pumpheavy duty gearbox1,2 m roller tableuser manual in GERMAN or ENGLISHOPTIONS:turn table for mitre cutshydraulic top clamping from aboveroller tables and band saw bladesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 23800 €: 456.96 €: Doppelsäulenführung : 5200x41x1,3 mm: 20-100 m/min: 460 mm: 460 mm: 650x460 mm: rund 380 mm, quadrat 380 : 590 mm: 0.55 kW: 4 kW: 0.12 kW: 3100 mm: 1000 mm: 1800 mm: 1520 kgblade brushcontrol panelhydraulic vicehydromechanical blade tensioninverterlinear waymaterial limit shaftheight adjustmentpressure adjustmentcoolant pumpsaw bladesecurity switchgearbox1,2 meter roller tableuser manual in GERMAN or ENGLISHOPTION:turn table for mitre cutshydraulic top clamping from aboveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diamètre de coupe : - Longueur de la bande de scie à mms : - Mm Largeur de coupe : - Mmtable - Utilisable : JA Poids de la machine : 200 kg Dimensions de la machine environ : - Mwith Équipement de soudage Les données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Türkei : 30900 €: 590.19 €: Doppelsäulenführung : 6000x41x1,3 mm: 20-100 m/min: 560 mm: 560 mm: 570x560 mm: 590 mm: 1.1 kW: 4 kW: 0.12 kW: 500 mm: 1050 mm: 2050 mm: 2242 kgNC controldouble column band saw3° cutting angleblade brushcontrol panelhydraulic feeding vicehydraulic vicehydromechanical blade tensioninverterlinear wayoptical height adjustmentproximity switch for sensing blade slippagematerial limit shaftpressure adjustmentcoolant pumpsaw bladesecurity switchgearboxuser manual in GERMAN or ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions of saw-band: 2950x27x0,9 mm: 15-100 m/min: 285 mmcapacity 90 degrees: square: 220 mmcapacity 90 degrees: round: 250 mmcapacity 90 degrees: flat: 280x220 mmcapacity 60 degrees: round: 120 mmcapacity 60 degrees: square: 80 mmcapacity 60 degrees: flat: 140x100 mmcapacity 45 degrees: round: 230/200 mmcapacity 45 degrees: square: 200/170 mmcapacity 45 degrees: flat: 220x200/200x140 mmtotal power requirement: 2,2 kWWeight: 990 kgOverall size: 2500x2230x2050 mmAccessories / equipment:- Discharge roller conveyor with pneumatic stop, 350 mm wide, digital, length 7.000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 14110 €: 270.91 €: Schwenkrahmen : 3270x27x0,9 mm: 35/70 m/min: 280 mm: 240 mm: 420x200 mm: rund 260 mm, quadrat 240 : rund 170 mm, quadrat 160 : rund 200 mm, quadrat 180 : 830 mm: 1600 mm: 1600 mm: 1800 mm: 488 kghydraulicvicesaw beam moves up and down by hydraulic cylinderfast descentautomatic fast up/down conrolled by feeler pinadjustable pressure according to section and type of materialdouble safety buton for cycle start2 speedscoolant equipment_CUTTING CYCLE_Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up,Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid,Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 45100 €: 861.41 €: Doppelsäulenführung : 5200x34x1,1 mm: 20-100 m/min: 360 mm: 360 mm: 610x360 mm: rund 360 mm, quadrat 360 : rund 360 mm, quadrat 360 : rund 325 mm, quadrat 265 : 735 mm: 1.5 kW: 3 kW: 0.12 kW: 2850 mm: 2250 mm: 1870 mm: 2400 kgNC controldouble column band saw on linear guidelines3° cutting angleblade brushcontrol panelhydraulic feeding vicehydraulic vicehydromechanical blade tensioninginverteroptical height adjustmentproximity switch for sensing blade slippagematerial limit shaftpressure adjustmentcoolant pumpsaw bladesecurity switchuser manual in GERMAN or ENGLISHOPTIONS:hydraulic top clampingmicro coolant equipmentlaser cutting lineALTERNATIVE:model BMSO 360 CGS NC (with servo instead of hyraulic feed) € 50.900,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 25680 €: 490.49 €: Schwenkrahmen : 3270x27x0,9 mm: 35/70 (PLC) m/min: 20-100 (CNC/Touch) m/min: 300 mm: 240 mm: 420x200 mm: rund 240 mm, quadrat 230 : rund 170 mm, quadrat 170 : 220 mm: 835 mm: 0.37 kW: 0.12 kW: 3220 mm: 2050 mm: 1900 mm: 1090 kgVERSION PLC: adjustment of material feed by handwheel, counter and limit switchVERSION CNC:feed lenght and numbers by CNC (99 progamms)VERSION TOUCH: as CNC but with 7", touchscreen for easier operationautomatic cutting cycle clamping, saw blade and cutting fluid on, cutting operation, saw blade and cutting fluid off, fast return stroke, declampautomatic feed 800 mm/strokechip conveyer (CNC/Touch)variable cutting pressureMachine with 2 cutting speeds (PLC) orspeed variator (CNC/Touch)cutting fluid systemautomatic saw blade breakage detectionhydraulic vicessuggested max. diam. in automatic mo ...

dimensions of saw-band: 5.330 x 41 x 1,3 mmcapacity 90 degrees: round: 460 mmcapacity 90 degrees: square: 460 mmcapacity 90 degrees: flat: 440 x 600 mmCutting area at 45 degrees left: round: 445 mm: 410 mmCutting area at 60 degrees left: round: 295 mmCutting range at 60 degrees left: square: 295 mmtable height: 890 mmcutting speed: 25 - 80 m/mintotal power requirement: 3,75 kWmachine weight ab.: 1.500 kgdimensions: 2810 x 1135 x 1860 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 300 mmsaw band length: 3660 x 27 x 0.9 mmcapacity 90 degrees: flat: 320 x 290 mmcapacity 45 degrees: round: 290 mmcapacity 45 degrees: flat: 260 x 280 mmcapacity 60 degrees: round: 200 mmcapacity 60 degrees: flat: 180 x 170 mmcoolant capacity: ca. 100 lControl: SPS total power requirement: 2.4 kW ACweight: 904 kgrange L-W-H: 2410 x 1920 x 2020 mm in good conditions Original price approx. 22.000 euros Special price on requestFeatures:- Robust electro-hydraulic miter band saw, fully automatic (INDUSTRIAL) Fully automatic with automatic material feed Material feed unit with recirculating ball screws- Includes PLC MITSUBISHI control unit 20 programs, each with 15 cutting lengths + number of pieces programmable- For angles from 0° to 60°, with ball-bearing rotary table Mitre cuts up to 45° possible in automatic mode Mitre cuts up to 60° possible in semi-automatic mode Ma ...

cutting diameter: 250 mmsaw band length: 2950 mmcutting width: 280 mmdimensions of saw-band: 2950 x 27 x 0,9 mmcapacity 90 degrees: flat: 280 x 200 mmcapacity 90 degrees: square: 230 mmcapacity 45 degrees: round: 190 mmcapacity 45 degrees: flat: 180 x 180 mmcapacity 45 degrees: square: 180 mmcapacity 60 degrees: round: 120 mmcapacity 60 degrees: flat: 110 x 110 mmcapacity 60 degrees: square: 110 mmtotal power requirement: 1,5 / 1,8 kWweight of the machine ca.: 0,4 tPowerful miter band saw for cuts from 0 ° to 60 ° left-CCS (CutControlSystem) for automatic cutting. (Stepless regulation of theFeed and switch-off at the end of the cut)Description:-Manual cutting cycle-AUTOMATIC CUT: (via selector switch) with stepless settings of theLowering speed and adjustment of the cutting pressure via compensating spring-Stable, torsion-resistant and low-vibration saw frame made of cast steel-Vice wi ...

Diamètre de coupe : 210 mmBande, longueur : 400 mm, capacité 90 degrés : carré : 190 mm, capacité 90 degrés : plat : 240 x 190 mm, vitesse de coupe : 16/32 m/min, puissance totale requise : 1,1 kW, de la machine, environ : 180 kgdimensions : 1,2 x 0,8 x 80,8 m. Scie à manœuvre hydraulique avec : - Dispositif de refroidissement - bon état. Les données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.

Diamètre de la lame de scie : 800 x 800 x 1500 mm Diamètre de coupe : 200 mm Course : 150 mm Dimensions de la machine environ : mPuissance totale requise : 3 kW-poids de la machine environ : t Les données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.

cutting diameter: 230 mmcapacity 90 degrees: flat: 320 x 130 mmcapacity 90 degrees: square: 230 x 230 mmcapacity 45 degrees: flat: 230 x 140 mmcapacity 45 degrees: round: 220 mmcapacity 45 degrees: square: 190 x 190 mmcapacity 60 degrees: flat: 120 x 105 mmcapacity 60 degrees: square: 105 x 105 mmcapacity 60 degrees: round: 120 mmturning speed range:: 35 - 70 m/mindimensions of saw-band: 2720 x 27 x 0.9 mmheight of material-table: 950 mmtotal power requirement: 1.0 / 1.5 kWweight of the machine ca.: 410 kgdimensions of the machine ca.: 800 x 1550 x 1450 mm New price ~ 6.500 eurosFurnishing:- semi-automatic miter band saw, for cuts -45 / +60 degrees continuously- Infinitely variable saw feed via precision throttle- Infinitely adjustable cutting speed- Cooling device- Horizontal vise electrically-mechanically acting- Saw band- rotating - front control panel- User manual in GermanThe data f ...

cutting diameter: 440 mmsaw band length: 5200 x 34 x 1,1 mmcutting width: 610 mmcutting capacity - flat: 440 x 500 / 30° mmcutting capacity - round: 440 /30° mmcutting capacity - square: 440 x 440 / 30° mmcutting capacity - flat: 440 x 410 /45° mmcutting capacity - round: 410 /45° mmcutting capacity - square: 410 x 410 / 45° mmcutting capacity - flat: 440 x 250 /60° mmcutting capacity - round: 320 / 60° mmcutting capacity - square: 250 x 250 / 60° mmcutting capacity - flat: 440 x 610 / 90° mmcutting capacity - round: 440 / 90° mmcutting capacity - square: 440 x 440 / 90° mmspeed: 20 - 100 m/minsawing motor: 3 kWhydraulic motor: 1,1 kWcoolant pump: 0,12 kWvoltage: 400 V / 50 Hztotal power requirement: 4,3 kWweight of the machine ca.: 1,54 tdimensions of the machine ca.: 3000 x 1200 x 2000 mmInverterHydraulic viceSaw blade at an angle of 3°Digital display of the angleHydraulic ...

diamètre de la lame de scie : 275 mmDiamètre de coupe : 90 mm Course : 250 mm Vitesses de tournage : 40 / 80 U/mincapacité 90 degrés : carré : 75 mmpuissance totale requise : 1,0 / 1,4 kWPoids de la machine env. : 250 kgdimensions de la machine env. : 600 x 700 x 1600 mmCaractéristiques :- Système de refroidissement- Réglage unilatéral de l’onglet- Lame de scie 275 x 2,5 x 40 mm- Base de la machineLes données de cette annonce ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.

saw blade diameter: 350 mmdimensions of saw-blade: 350 x 32 x 2,5 mmcutting diameter: 115 mmstroke: 100 mmcapacity 90 degrees: square: 95 mmcapacity 90 degrees: flat: 180 x 95 mmcapacity 45 degrees: round: rechts & links 110 mmcapacity 45 degrees: square: rechts & links 95 mmcapacity 45 degrees: flat: rechts & links 125 x 95 mmcapacity 60 degrees: round: 90 mmcapacity 60 degrees: square: 80 mmcapacity 60 degrees: flat: 90 x 95 mmcutting speed: 15 / 30 / 45 / 90 m/mintotal power requirement: 2,6 kWweight of the machine ca.: 375 kgdimensions of the machine ca.: 1000 x 950 x 1800 mmFeatures:- With miter adjustment 60° left / 45° right- Coolant device- 2 speeds- Machine base- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 315 mmdimensions of saw-blade: 350 x 40 x 2,5 mmcutting diameter: 90 mmcapacity 90 degrees: flat: 150 x 90 mmcapacity 45 degrees: round: rechts & links 90 mmcapacity 45 degrees: flat: rechts & links 105 x 90 mmcapacity 60 degrees: round: 90 mmcapacity 60 degrees: flat: 75 x 70 mmcutting speed: 33 / 66 m/mintotal power requirement: 1,8 kWweight of the machine ca.: 340 kgdimensions of the machine ca.: 900 x 800 x 1700 mmFeatures:- With miter adjustment 60° left / 45° right- Coolant device- 2 speeds- Saw blade- Machine base- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diamètre de la lame de scie : 450 mmLame de scie : 50 mmcapacité 90 degrés : rond : 150 mmcapacité 90 degrés : plat : 290x30 mmcapacité 90 degrés : carré : 135x135 mm : 0 - 1000 mm/minvitesse de retour rapide : 1650 mm/min : 0 - 30 dimensions de la machine env. : 1500x1200x1770 mmpoids de la machine env. : 750 kgLes données de cette annonce ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.

dimensions of saw-blade: 350x32x4 mmvice: 180 mm: 1700/3400 U/mincapacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 105 mmcapacity 90 degrees: flat: 180x70 mmcapacity 45 degrees: round: 120/110 mmcapacity 45 degrees: square: 100/95 mmcapacity 45 degrees: flat: 135x60 mmoutput: 2,2 kwweight: 225 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 9000x1400x1680 mmWeight: 1600 kgTotal power requirement: 7,5 kw- Max process length 2.5 m (Can be customzied)- Max process width 200 mm -Min process width 30 mm- Max process thickness 1O0 mm (Can be customzied)- Saw blade 405/120/30/3 , 455/120/30/3 mm- Spindle motor 7.5 KW / 400 V- Machine size 9000 mm x 1400 mm x 1680 mm- Machine weight 1600 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.