tours machines d'occasion à vendre (3,104)

number of spindles:9 spindle passage:46 mmArticle: CNC-controlled multi-spindle automatic latheManufacturer: SchütteType: SC9-46Yob: 2016Six-spindle automatic lathe with 6 main spindles with max. nominal throughput D=46mm and 3 counter spindlesMain spindles: 6 motor spindles D46mm, 5. 000 rpm, 35 Nm to 80 NmCross slide units, transverse: 6 units, in positions I to VI,Slide units, longitudinal: 5 units, in positions I to V, Slide units, longitudinal: 5 units, in positions I to V,Counter spindles: 3 units, one each in positions VI, VIII and IX, 7. 500 rpmCross slide units, transverse: 2 units, in positions VIII and IX,Control:Siemens SINUMERIK 840SL with double NCUSoftware: Schütte SICS, Sinomerik Operate 4.5, Safety Integreted,Spindle coupling package ?CP-Expert?, for up to 8 spindle couplings (maximum expansion)Synchronous action package ?Level? 2, incl. cross-mode actions/ASUP (maximu ...

turning diameter:26 mmArticle: High-precision CNC lathe with linear cross slideManufacturer: BenzingerType: GOFuture B1Yob: 2016Machine was only used for reworking, i.e. only light machining work was carried out!Control: Siemens Sinumerik 840DslMain spindle: maintenance-free motor spindleBar capacity: D26mmLoading and unloading device type IBAdditional gripper system for placing the workpieces in the correct position on the unloading beltCoaxial valve for coolant to the linear tools (3 pieces)Internal clamping deviceC-axis main spindle for digital control incl. transmit functionAdjusting microscope 16x magnificationCoolant supply through the spindle clamping cylinder,Sealing air,Speed increase of the motor spindle to 8. 0000 rpmNordmann tool monitoringProfibus master interfaceHinged belt conveyor KnollCompact coolant device KnollMBE interfaceSmall fire extinguishing system Kraft & BauerN ...

number of spindles:6 Article: cam-controlled multi-spindle automatic lathe Manufacturer: SchütteType: SFH130Yob: 1995six-spindle automatic lathe6 main spindles as a chucker automatic lathecontrol Siemens S7-200 PLCDnt driveloading and disloading in position 6additional cooling pump with magnetic spark plug filterPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:6 Article: cam-controlled multi-spindle automatic lathe Manufacturer: SchütteType: SG18Yob: 1999six-spindle automatic lathe6 main spindles as a chucker automatic lathecontrol Siemens S7-200 PLCloading and disloading in position 6spindle brakePlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:6 spindle passage:20 mmArticle: cam-controlled multi-spindle automatic latheManufacturer: SchütteType: SF20 S DntYob: 1999Six-spindle automatic lathe with 6 main spindlesmax. nominal diameter: D=20mmSpindle drum hirth coupled,CNC cross slide in positions 4,CNC cross slide in positions 5,pick up in position 6, sorting chute, 1x independent feed,thread cutting couplings,workpiece belt,Coolant tank with hinged belt chip conveyor Ruez,Oil/steel operation,PLC Siemens S7, Siemens CNC control, Siemens Simodrive 611,The scope of delivery regarding the tooling equipment could be different like pictures.Interface for: IEMCA PRA bar loading magazine (optional: IEMCA PRA40/31/ built in 1997 rear loader)

number of spindles:6 spindle passage:36 mmArticle: cam-controlled multi-spindle automatic latheManufacturer: SchutteType: SF32 S DntYob: 2003Eight-spindle automatic lathe with 6 main spindlesmax. nominal diameter: D=36mm!Spindle drum with hirth coupling,Elbaron oil mist filter,sorting chute,Interface for: IEMCA PRA bar loading magazine (optional I: IEMCA PRA52/42/F);coolant tank with hinged chip conveyor;Schimpke KSS active cooler,control: Siemens S7-300 PLC;tooling included in delivery may differ from the images;various collets are included in delivery up to D36mmPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:6 spindle passage:32 mmArticle: cam-controlled multi-spindle automatic latheManufacturer: SchutteType: SF32 S DntYob: 2001Eight-spindle automatic lathe with 6 main spindlesmax. nominal diameter: D=32mmSpindle drum with hirth coupling,Elbaron oil mist filter,sorting chute,Interface for: IEMCA PRA bar loading magazine (optional I: IEMCA PRA52/42/F);coolant tank with hinged chip conveyor;Schimpke KSS active cooler,control: Siemens S7-300 PLC;tooling included in delivery may differ from the imagesPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

spindle passage:36 mmArticle: CNC-controlled multi-spindle automatic latheManufacturer: SchütteType: A36PCYob: 2005Loading magazine by Pietro CucchiKnoll unit7 radial cross-type carriages2 additional speed motors in 4th and 5th positions2 additional speed motors for front spindles in position D (pick-up) and B (for front motorized spindle)1 polygon cutter1 motorized front spindle1 radial motorized in position IV for cross-type carriage1 radial motorized in position V to be mounted on X-type carriage only (no cross-type carriage)1 straight head for motorized position IV1 90-degree tilted head for motorized position IV1 tilt-adjustable head for motorized position IVPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:8 Article: cam-controlled multi-spindle automatic lathe Manufacturer: SchütteType: AFH130 with CNCYob: 1990eight-spindle automatic lathe8 main spindlesChucker AFH130 for complete machining means front- and back sideControl Siemens Sinumerik 840DIcomplete revising and new configuration of this machine in year 2010.loading arm, for loading and disloading Workpiece turn around station in pos. 4 position 4 with workpiece length controlCNC compound slide in pos. 5coolant pump with magnet candle filterdelivered tooling: could be different like picturesoption:Ergomat TBF42 for cutting off for half finnishing with FMB-TurboVisiting under production condition is possiblePlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

turning diameter:336 mmturning length:216 mmweight of the machine ca.:8,3 tArticle: CNC multi-axis latheManufacturer: HurcoModel: TMX 8MYSiYear of manufacture: 2022CNC multi-axis latheExcerpt from manufacturer?s specifications:Working area:Max. turning diameter: 336 mmMax. swing diameter: 560 mmMain spindle specifications:Max. speed: 4,500 rpmChuck diameter: 210 mmTie-bar diameter: 64.5 mmCounter-spindle specifications:Max. speed: 6,000 rpmTool turret with driven toolsBar-Loading Magazine: SAMSYS M3000 (2022 model)HYDAC CoolerThe machine can be visited under power.The tool configuration included in the scope of delivery may differ from the imagesPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Horizontal turning machine manufactured in 2003. This DMT Kern CD480 features a main drive power of 17 kW and a total power requirement of 25 kW. Including tool turret with 12 positions and various VDI30 holders. If you are looking to get high-quality turning capabilities, consider the DMT Kern CD480 machine we have for sale. Contact us for further details.

This 3-axis MORI SEIKI SL-250ASMC was manufactured in 1989. It features a Z-axis travel of 520 mm and a B-axis travel of 515 mm, providing versatile turning and milling capabilities. The machine is equipped with a chip conveyor and a bar feeder for enhanced productivity. If you are looking to get high-quality turning and milling capabilities, consider the MORI SEIKI SL-250ASMC turn-mill centre we have for sale. Contact us for further details.

X-axis: 260mm, Y-axis: 100mm (±50mm), Z1-/Z2-axis: 800/800mm, swing diameter over bed: 660mm, swing diameter over cross slide: 540mm, distance between spindle noses: 1050mm, max. turning diameter: 500mm, max. workpiece length: 1000mm, max. bar capacity: 65mm, spindle speed: 0-5,000rpm, torque: 25Nm, drive power: 6.7kW, number of driven tools: 12, number of tool stations: 12, shank diameter for boring bars: 40mm, tool change time: 0.7s, speed range of driven tools: 0-12,000rpm, torque of driven tools: 30Nm, drive power of driven tools: 10kW, compressed air connection: 6bar, connected load: 40kVA, control: Sinumerik 810D PCU20, length: 3320mm, width: 2070mm, height: 2341mm, total weight: 8.45t, operating hours: 89,129h, with documentation and service reports, regularly maintained. An on-site inspection is possible.

Main spindle bore: 42mm, rated voltage: 400V AC, rated current: 45A, connected load: 26kW, control: Siemens SINUMERIK 840D/PCU50, length: 3400mm, width: 1400mm, height: 1750mm, weight: 2.5t, operating hours: >100,000h, spindle hours: 48,348h, with FMB Turbo 5-42 bar feeder, documentation and service reports, regularly maintained, an on-site inspection is possible, available from March 2027.

Horizontal turning machine manufactured in 2008. This Mazak Quick Turn Nexus 100-II features a maximum turning diameter of approximately 280 mm and a turning length of about 335 mm. It includes a 12-position drum turret and a programmable tailstock. Known defects: Spindle fault: Alarm 44 SPINDEL ERROS 3 - Machine must warm up before machining, then operational. Repair costs according to quote approx. 2,800 EUR. If you are looking to get high-quality turning capabilities, consider the Mazak Quick Turn Nexus 100-II machine we have for sale. Contact us for further details regarding this machine.

X-axis travel: 360mm, Z-axis travel: 980/1580mm, rapid traverse X/Z: 15/24m/min, max. turning diameter: approx. 500mm, max. swing diameter: 800mm, spindle nose: A11, bar capacity: 110mm, power (100%/40%): 22/33kW, torque gear stage 1: 175/263Nm, torque gear stage 2: 700/1,050Nm, turret type: servo turret, tool stations: 12, tool holder: VDI 50, number of driven tools: 12, driven tool speed: 4,000rpm, power (100%/40%): 5/9.6kW, axial torque (100%/40%): 18/35Nm, radial torque (100%/40%): 15/28.8Nm, hydraulic tank: 11l, central lubrication reservoir: approx. 2-3l, mains connection: 3/PE~ 400V, frequency: 50/60Hz, operating current (I_B): 63A, rated current (I_N): 80A, length: 3,250mm, width: 1,980mm, height: 2,090mm, weight: 8.5t, operating hours: 27,271h, including Spinner SERVO-LOAD 110 1500 bar feeder and documentation. On-site inspection is possible.

Tournoi étudiant de Colchester Drehmaschine Drehbank Hersteller : Colchester Type [ type] : Étudiant Unité de contrôle : conventionnelle Poids : environ 1 000 kg Bon état fonctionnel Condition absolue originale de première propriété, d’une entreprise allemande - Divers accessoires selon les photos • Construction en fonte massive pour une grande stabilité • Options de réglage polyvalentes pour divers processus d’usinage • Moteur puissant pour des tâches exigeantes • Colchester Student : reconnu pour sa qualité, sa durabilité, sa fiabilité La visite peut se faire à la dernière minute. Nous serons heureux de répondre à toute autre question que vous pourriez avoir. Le prix, à partir de l’action ici plus la TVA. Condition : bonne - prête pour la démonstration Livraison : à partir du stock - telle que vue Paiement : purement net - à la  ...

Tour CNC Okuma LU 45 M -3000 Contrôle : OSP-P200L Année de fabrication : 2009 Machine interne n’est pas 81 diamètre maximal de rotation 660 mm Longueur maximale de rotation 3 000 mm Alésage de la broche Ø 260 mm Vitesse de la broche : 2 800 tr/min Voyages : Axe X 420 mm Axe Z : 3 025 mm Puissance de la broche : 30 kW Accessoires - Convoyeurs à copeaux - Tourelle à outils avec 12 places - Outils

Horizontal turning machine manufactured in 2011. This Mazak Quick Turn Smart 100 S (QTS 100 S) features a maximum turning diameter of approximately 280 mm and a turning length of about 308 mm. It includes a 12-position drum turret for efficient tool changes and a programmable tailstock. If you are looking to get high-quality turning capabilities, consider the Mazak Quick Turn Smart 100 S machine we have for sale. Contact us for further details.

Horizontal turning machine manufactured in 1992. This Monforts RNC 5 features a maximum turning diameter of 340 mm and a turning length of 1000 mm. It is equipped with a control system from Fanuc Series 15 T and offers 12 tool positions for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the Monforts RNC 5 machine we have for sale. Contact us for further details.

Offered for sale is a CNC lathe with tool turret. Technical specifications: Machine operating hours: approx. 20000h, main spindle bearings replaced at approx. 16000 machine operating hours. Control system: Heidenhain CNC control. Equipped with tool turret, tailstock, various clamping tools, tool holders, collets and additional tools as well as chip conveyor. Inspection possible by arrangement.

Horizontal turning machine manufactured in 2020. This JESSEY MJ1840 features a swing over bed of 460 mm and a distance between centres of 1000 mm. It is equipped with an 80 mm spindle bore and a D1-8 Camlock spindle nose. If you are looking to get high-quality turning capabilities, consider the JESSEY MJ1840 machine we have for sale. Contact us for further details.

Tour CNC à cycle contrôlé Fabricant : VDF Boehringer Type : DUS 560 Année de fabrication : 1997 Contrôle : CNC Plus Circulation sur le lit max : 570 mm Longueur de rotation : 1 000 mm Tête de broche taille 8 selon DIN 55027 Coupe transversale du ciseau H/E max : 32 x 25 mm Pas de filetage : 0,1 – 400 mm Vitesse de la broche : Étage de transmission 1 : plage de vitesse de 3 à 500 variable à l’infini Étage de transmission 2 : plage de vitesse de 15 à 2 500 vitesses variable à l’infini Vitesse : Moteur principal : 8 000 min⁻¹ Entraînement d’alimentation X : 2 000 min⁻¹ Entraînement d’alimentation Z : 2 000 min⁻¹ Crosse arrière : Cône de plume : MK 5 Mouvement de la crosse à la main Vitesse d’avance : Maximum longitudinal : 10 m/min. Plan maximal : 5 m/min. Avances automatiques : longitudinales + plates 0,01 –  ...

OKUMA TwinStar LT200-M - Tour CNC - Année de construction : 2006 - Disponible immédiatement

Key data: 250 mm, 1000 mm

avec commande CNC, Fabr. OKUMA, type : OSP 7000 L, longueur de tournage max. 1000 mm, max. Diamètre de tournage : 250 mm, tourelle d’outil avec 12 positions d’outil, les 12 positions adaptées aux outils entraînés, avec système de filtration et convoyeur à copeaux

Key data: 250 mm, 2240 U/min

Longueur maximale de rotation : 1000 mm, hauteur centrale : 250 mm, broche creuse diamètre : 60 mm, vitesse maximale : 2240 tr/min, avec mandrin à 3 mâchoires, Fabr. SCHUNK, Type : ROTA-S-PLUS, diamètre : 250 mm, avec lumière machine, repose-stéré stable et support en acier Multifix

Longueur maximale de tournage : environ 800 mm, hauteur centrale : environ 150 mm, diamètre creux de la broche : environ 50 mm, avec affichage numérique à 3 axes, Fabr. ELESTA, type : VISULESTAIIE, avec support en acier multifix, mandrin magnétique, dispositif de refroidissement, protection antiéclaboussure et lumière de machine ainsi que divers accessoires mécaniques

Tour CNC HEYLIGENSTAEDT HEYNUMAT 24U/1500 avec axe C  Année de fabrication : 1991 Contrôle CNC : SIEMENS 3T Plage de vitesses de la broche : 9–2 240 tr/min, 2 étages de vitesse Chuck à trois mâchoires : • FORKARDT 3NHF-400-120, 400 mm • FORKARDT KS 500, 500 mm Belet : SMW SLK Tourelle d’outils : TWS • Taille de l’arbre : 60 mm • 12 stations d’outillage Crosse arrière : • Diamètre de la plume : 160 mm • Course de quille : 160 mm Convoyeur à puces : MAYFRAN Diamètre circonférentiel : • Au-dessus du lit : 900 mm • Culasse plate : 800/770 mm Puissance principale : 55/75 kW Poids de la machine : environ 12 000 kg Tour CNC robuste et puissant avec contrôle SIEMENS 3T, large plage de vitesses de broche et puissance d’entraînement élevée. Équipé de mandrins FORKARDT, tourelle d’outils TWS, repose-papier SMW et convoyeur à ...

Two CNC turning centers Hitachi Seiki HITEC-TURN 20SII are available, control: Seiki MULTI, weight: approx. 4.3t, an on-site inspection is possible.

Horizontal turning machine manufactured in 2000. This Gildemeister CTX 500 S2 features a maximum turning diameter of 455 mm and a turning length of 1097 mm. It includes a robust tool system with a disc turret and a maximum chuck diameter of 315 mm. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 500 S2 machine we have for sale. Contact us for further details.