tours machines d'occasion à vendre (3,107)

Cycle de tour contrôlé Fabricant : Weiler Type : E70 Année de fabrication : 2001 Contrôle : Contrôle du cycle de Weiler D2 Heures : 68 950 Largeur de pointe : 2000 mm Hauteur de la pointe : 360 mm Dotation maximale Ø : 400 mm Ø max. sur le lit : 720mm Max. Ø culasse sur la face 430 mm Contre-décalage maximal Ø : 780 mm Longueur du décalage : 160 mm Poids maximal de la pièce : 3 800 kg Alésage de la broche : 106 mm Tête de broche : taille 11 Libération rapide : tourelle Parat 4 vitesses Dimensions : 4 030 x 2 443 x 1 900 mm Poids : 5 200 kg

Workpiece length: 3000mm, swing over bed/carriage: 800mm/570mm, turning diameter without gap bridge: 1035mm, gap bridge length: 330mm, bed width: 400mm, travel X/Z: 420mm/230mm, max. spindle speed: 1600rpm, spindle bore: 105mm, spindle mount: D1-8, spindle taper: MT5, tailstock taper: MT5, tailstock quill diameter: 90mm, tailstock quill stroke: 235mm, main drive motor power: 7.5kW. Machine dimensions X/Y/Z: approx. 4740mm/1140mm/1910mm, weight: approx. 3870kg. Including measuring system. Documentation available. An on-site inspection is possible.

- Contrôle : SIEMENS SINUMERIK 840-C - Tige maximale Ø : 65 mm - Axe C - Broche principale de la platine : 31 - 6 300 tr/min - Tourelle 1 : 8 stations, dont 4 sont alimentées - Revolver 2 : 8 stations, dont 4 sont alimentées - Vitesse appliquée Temps d’exploitation : 4 000 1/min - Les deux tourelles avec refroidissement interne - Système haute pression - Convoyeurs à copeaux - Alimentateur à barres IRCO SiMag 65 - Longueur maximale de la tige : 3200 mm Dimensions LxLxH : - Machine 3400 x 1700 x 1800 mm - Alimentateur de barres 4000 x 1000 x 1400 mm - Convoyeur à copeaux 3000 x 1100 x 1600 mm Poids total : environ 6 000 kg

This 5-axis Mazak INTEGREX 200-3 was manufactured in 2004. It features a maximum turning diameter of 660 mm and a maximum turning length of 1045 mm. The machine is equipped with a main spindle speed of 5000 rpm and a milling spindle speed of up to 12000 rpm. If you are looking to get high-quality mill-turn capabilities, consider the Mazak INTEGREX 200-3 machine we have for sale. Contact us for further details.

Horizontal turning machine manufactured in 2008. This MORI SEIKI NL 3000 MC/700 features a maximum turning diameter of 430 mm and a turning length of 713 mm. It includes a 12-station turret for efficient tool changes and operates at a spindle speed of 3000 rpm. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI NL 3000 MC/700 machine we have for sale. Contact us for further details.

Horizontal turning machine manufactured in 2012. This HWACHEON CUTEX 160 B VDI features a swing over bed of 550 mm and a maximum spindle speed of 4500 rpm. It offers travels of 170 mm in the X-axis and 335 mm in the Z-axis, along with 12 tool positions. If you are looking to get high-quality turning capabilities, consider the HWACHEON CUTEX 160 B VDI machine we have for sale. Contact us for further details.

Distance between centers: 1500mm, swing over bed/cross slide: 620mm/400mm, control: Heidenhain ManualPlus 420. The machine has been in daily single-shift operation since 2008. An on-site inspection is possible.

Center height: 200mm, distance between centers: 1000mm, swing over bed/cross slide: 400mm/225mm, spindle bore: 62mm, spindle nose: DIN 55027/6, tailstock taper: MK4, max. spindle speed: 4000rpm, main drive power: 10.5kW, operating hours PLC/motor: 1218h/145h. Machine dimensions X/Y/Z: approx. 2100mm/1080mm/1800mm, weight: approx. 1800kg. An on-site inspection is possible.

This 2022 WEILER E 50 HD X 2000 turning center is equipped with a Siemens Sinumerik 840D sl (WEILER SL2) Controller with 15 TFT. Designed for precision, it offers a max. turning length of 2000 mm and a max. turning diameter of 340 mm, with a swing over bed of 570 mm. The spindle provides 17 / 20 kW power and 1300 Nm torque, with a spindle bore / bar capacity of 83 mm. Featuring 2 (X/Z) controlled axes, it includes a tailstock with 200 mm travel. This machine is in like new condition, with only 720 operating hours. The purchase includes an unused drilling/milling unit specifically for the Weiler E50, making this a highly versatile solution for demanding production tasks.

Key data: 660 mm, 1500 mm

Axe des X 580 mm Axe des Y 150 mm Axe Z 1 545 mm Axe B -30 à 210 Axe W 1 490 mm Axe principal Puissance de transmission 22 kW Vitesse maximale de la broche 4 600 tr/min Passage de la barre maximale 52 mm Sous-broche Puissance de transmission 18,5 kW Vitesse maximale de la broche 5 000 tr/min Broche de fraisage Puissance de transmission 18,5 kW Vitesse maximale de la broche 12 000 tr/min Axe B 0.0001 Interface pour alimentateur de barres Attrape-pièces Convoyeur à puces Pompe haute pression de 50 bars Usinage simultané sur 5 axes Axe de flexion complet de l’axe C Gear Hobbing, Abwalfräsem Filetage synchronisé de broche d’usinage Interpolation de bouteilles Préparation pour plusieurs porte-outils et porte-outils flash 1 pièce LNS Servo à chargement rapide 3 chargeur à barres courtes

Key data: 380 mm, 1000 mm

Axe principal Puissance de transmission 26 kW Vitesse maximale de la broche 4000 tr/min Passage de la barre maximale 77 mm Nez à fuseau A2-8 Revovler Entraînement par fraisage électrique 5,5 kW Outils max. 4500 tr/min Stations d’outillage 12 Contrôle matriciel Mazatrol Axe principal avec axe C complet Mesure de l’outil Tooleye Convoyeur à copeaux, débit droit Pompe de refroidissement 15 bar Interface pour alimentateur de barres Attrape-pièces Contre-stock B-210 à 3 mâchoires Ensemble porte-outils : 7 porte-outils fixes + 3 porte-outils entraînés Marque CE Documentation

Key data: 380 mm, 1019 mm

Axe des X 234 mm Axe des Y 100 mm Axe Z 1090 mm Contre-stock 1075 mm Axe C 360° Puissance de transmission 26 kW Passage de la barre maximale 80 mm Vitesse maximale 4000 tr/min Nombre de positions d’outil 12 Entraînement par fraisage électrique 5,5 kW Vitesse maximale de la broche 5000 tr/min Stations d’outils motorisées 12

Key data: 1160 mm

Puissant tour CNC vertical de HYUNDAI WIA Année de construction 2013 Guide du manuel FANUC 32i Diamètre maximal de rotation 1 160 mm Diamètre maximal de la rotation : 1 355 mm Puissance de la broche principale jusqu’à 60 kW couple maximal 6 490 Nm Axe C avec résolution de 0,001° Tourelle à outillage BMT85P 12 vitesses 12 stations d’outillage motorisées Renishaw Q-Setter Surveillance des casses d’outils Hyundai WIA Système de liquide de refroidissement de 20 bars Convoyeur à puces à bande articulé Mandrin de 800 mm à 3 mâchoires Seoam CAS 32

Horizontal turning machine manufactured in 2014. This SEIGER SLZ 500E features a center distance of 1500 mm and a swing diameter over the bed of 500 mm. It is equipped with a powerful main drive of 20/25 kW and a maximum spindle torque of approximately 1400 Nm. If you are looking to get high-quality turning capabilities, consider the SEIGER SLZ 500E machine we have for sale. Contact us for further details regarding this machine.

Center height: 225mm, distance between centers: 1000mm, swing over bed/cross slide: 450mm/260mm, spindle bore: 65mm, max. spindle speed: 3000rpm, max. feed rate: 10m/min, tool turret: 4, main motor power: 7.5kW, control: Fanuc 0i Mate TC. Machine dimensions X/Y/Z: approx. 3500mm/1500mm/1700mm, weight: approx. 1550kg, operating hours: approx. 27000h, feed hours: approx. 1329h. Documentation available. An on-site inspection is possible.

Tourage PPL 200-225 - Diamètre de rotation au-dessus du lit : 400-450 mm - Diamètre de rotation sur la culasse : 235-285 mm - Décalage avec chevalet : diamètre de rotation 600-650 mm - Diamètre de la plaque frontale : 350 mm - Largeur du plateau : 320 mm - Puissance moteur : 5,5 ch - Affût de l’outil : course de 150 mm En bon état, entièrement fonctionnel, peut être consulté et testé sur place. L’expédition est également à l’étranger. Visionnage : En gros, je tiens à souligner que l’article peut être consulté et testé sous autorisation avant achat afin d’écarter tout malentendu. Veuillez poser des questions avant d’acheter pour éviter toute confusion. Si vous avez des questions générales ou souhaitez prendre rendez-vous pour une visite, je peux être joignable à tout moment au numéro de téléphone ci-dessous ou ci-dessus. Sauf  ...

Tour CNC Fabricant : Gildemeister Type : CTX 410 V3 Machine n° : 0136004581 Année de fabrication : 2006 Contrôle : Siemens 840D ShopTurn Diamètre circonférentiel : 505 mm Diamètre du mandrin : 210 Passage de la broche : 65 mm Puissance de transmission : 40/100 % ED 21/28 KW Plage de vitesses de – à : 25-5000 Dimensions approximatives : 4300x2000x1800 Poids approximatif : 5600 kg - Revolver 12 vitesses - VDI 40 - Axe C - Outils motorisés : 12 stations - Usinage de barres de blocage - Convoyeurs à copeaux - Contre-stock - SMW Autoblok 210BB - Porte-outils entraînés 3x axials - Porte-outils entraînés 2x radiaux - Divers autres porte-outils - Nouveau moteur pour revolver Erreurs exceptées

An INDEX CNC lathe with counter spindle and IEMCA bar feeder is offered. Main spindle bore: 65mm, max. spindle speed: 7000rpm, axes: 4, live tooling: possible, tool system: VDI25, spindle operating hours: approx. 80000h, control: Siemens 840D. 2) Bar feeder: IEMCA Master 880/MP 33 L, Year of manufacture: 2004, max. bar length: 3300mm, round bars: 8mm-80mm, hexagonal bars: 7mm-65mm, square bars: 10mm-50mm, max. bar weight: 120kg, min. remnant length: 110mm, bar feeder weight: approx. 1350kg. Including chip conveyor. Machine was continuously maintained. The machine is available from October. Documentation available. Inspection possible by arrangement.

Horizontal turning machine manufactured in 1997. This BOEHRINGER DUC 560/2000 features a maximum turning diameter of 570 mm and a turning length of 2000 mm. It includes an 8-position disc turret and a three-jaw chuck with a diameter of 200 mm. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER DUC 560/2000 machine we have for sale. Contact us for further details.

Horizontal turning machine manufactured in 2017. This KEY EAST BV-40160 features a swing over bed of 1,010 mm and a distance between centers of 4,000 mm. It includes a front and rear chuck diameter of 500 mm, along with a digital readout for enhanced precision. If you are looking to get high-quality turning capabilities, consider the KEY EAST BV-40160 machine we have for sale. Contact us for further details.

Control voltage: 24V DC, rated current: 85A, connected load: 39kVA, rated power: 49kW, control-on operating hours: 32,779h, automatic operation 1: 5,040h, automatic operation 2 operating hours: 1,844h, production time: 33,731h, length: 3231mm, width: 2076mm, height: 1917mm, weight: 4.8t, with documentation, chip conveyor and FMB turbo 8-80 bar feeder. An on-site inspection is possible.

Rated current: 60A, control voltage: 24V, connected load: 33kW, length: 2290mm, width: 1350mm, height: 1630mm, weight: 4.65t, operating hours: 78,439h, with documentation, chip conveyor and bar feeder. An on-site inspection is possible.

Vertical turning machine manufactured in 2007. This EMAG VSC 400 features a turning diameter of 400 mm and a swing diameter of 420 mm. It offers an X-travel of 850 mm and Z-travel of 315 mm, with a maximum spindle speed of 4000 rpm. If you are looking to get high-quality turning capabilities, consider the EMAG VSC 400 machine we have for sale. Contact us for further details regarding this machine.

Horizontal turning machine manufactured in 2001. This EMCO EMCOMAT 200X1000 features a turning length of 1,000 mm and a maximum turning diameter over bed of 400 mm. It is equipped with a Fagor 8055 CNC control unit and includes a SMW AUTOBLOCK wedge-type chuck and a Multifix quick-change tool holder. If you are looking to get high-quality turning capabilities, consider the EMCO EMCOMAT 200X1000 machine we have for sale. Contact us for further details.

Horizontal turning machine manufactured in 1999. This Gildemeister CTX400 Serie2 features a maximum turning diameter of 420 mm and a distance between centers of 600 mm. It includes a disc turret with 12 tool stations and a maximum spindle speed of 5000 rpm. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX400 Serie2 machine we have for sale. Contact us for further details.

This 5-axis Mazak INTEGREX 200 III S was manufactured in 2004. It features a maximum turning diameter of 660 mm and a maximum workpiece weight of 150 kg. The machine is equipped with a tool magazine capacity of 80 slots and a rapid traverse speed of 38 m/min on the X and Z axes. If you are looking to get high-quality turning and milling capabilities, consider the Mazak INTEGREX 200 III S turn-mill centre we have for sale. Contact us for further details.