tours machines d'occasion à vendre (3,074)

Key data: 800 mm, 4000 mm

Description Tour cyclique Seiger SLZ 800E avec unité de fraisage Détails N° de machine 4443 Année de construction 2008 Contrôle Siemens Sinumerik Diamètre de tournage 800 mm Longueur de tournage 4 000 mm Plaque frontale 800 mm, 4 mors Plaque frontale 500 mm, 4 mors Mandrin à 3 mors 400 mm Lynette jusqu’à 450 mm (2 différents) Accessoires divers jeux de mors outil motorisé Dimensions admissibles de la pièce : entre les pointes sans réglage bâton 2 000 kg avec bâton de réglage 2 200 kg avec deux jeux 2 500 kg Vol dans la plaque frontale 750 kg Dimensions de la machine, y compris le revêtement 2 000 mm + Pointe large x 2 750 mm x 2 000 mm y compris la documentation

Contrôle Siemens 840D Diamètre de tournage 254 mm Longueur de tournage 500 mm Diamètre du mandrin 210 mm Longueur de tournage 410 mm Vitesse 4 500 min-1 Revolver à 8 vitesses Convoyeur

turning diameter: 400 mmswing diameter: 420 mmx-travel: 850 mmz-travel: 315 mmspindle head DIN 55026 - Size: 11 spindle bearing diameter: 140 mmturning speeds: max. 4000 U/mintool turret 12 times: C5 Captorapid traverse x + z axis: 45 / 30 m/minfeeding force: 11 kNtotal power requirement: 58 kWweight of the machine ca.: 9 tdimensions of the machine ca.: 9,5 x 4,5 x 3 mHard turningDry machiningChip conveyorPromot Portal and CellmasterNo clamping device availableNo tools availableno Cellmaster accessories availableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Largeur centrale : 1000 mm, diamètre de tournage au-dessus du lit/manivelle/chariot : 360 mm/510 mm/205 mm, alésage de la broche : 42 mm, vitesse : 2100 tr/min, dimensions de la machine X/Y/Z : env. 1950mm/900mm/1350mm, poids : env. 750kg. Une inspection sur place est possible.

turning diameter over bed: 350 mmturning diameter over slide rest: 310 mmturning length: 700 mmtotal power requirement: 4,6 kWweight of the machine ca.: 1,0 tDimensions (HxWxD): 2.200 x 1.300 x 1.175 mm--> Technical data Centre height: 175 mm--> Centre width: 800 mm--> Swing diameter over bed: 350 mm--> Swing diameter over support: 310 mm--> Gap length in front of the faceplate: 145 mm--> Cross slide travel: 205 mm--> Top slide travel: 100 mm--> Tool cross-section: 20x20 mm--> Bed Width: 220 mm--> Height: 300 mm--> Headstock Spindle bore: 46 mm--> Spindle nose: DIN 55027-5--> Spindle inner taper: 1:20--> Tool holder: MK-3--> Spindle speeds: 18--> Speed range: 25 - 2000 rpm--> Tailstock Quill diameter: 50 mm--> Quill inner taper: MK-3--> Quill travel: 140 mm--> Lateral adjustment: 10 mm--> Feed range Number of feeds: 256--> Longitudinal feeds (128): 0.042 - 0.929 mm Rev--> Cross feed ...

turning diameter over bed: 330 mmturning diameter over slide rest: 190 mmcentre distance: 650 mmturning length: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m3-jaw chucktool holder devicetail stock Technische Daten / technical details:Spitzenweite / center to center 650 mmDreh-Ø über Bett / turning diameter over bed 330 mmDreh-Ø über Schlitten / turning diameter over sledge 190 mmSpindelbohrung / spindle hole 36 mmDrehzahlbereich / spindle speed 30-2500 UpM /rpmAntriebsleistung / drive capacity 2,2 kWGewicht der Maschine ca. / weight ca. 600 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Un tour DMT est disponible. Distance centrale : 1000mm, diamètre de l’oscillation au-dessus du lit/toboggan facial : 420mm / 210mm, hauteur du lit : 340mm, alésage de la broche : 64mm, diamètre de la broche : 115mm, vitesse : 4000rpm, diamètre de la plume : 60mm, course de la plume : 140mm, largeur de la glissière du visage : 210mm, longueur de la glissière du visage : 640mm. Dimensions de la machine X/Y/Z : env. 2150mm/1150mm/1700mm, poids : env. 1800kg, commande : Heidenhain, heures de fonctionnement : env. 300h. Documentation disponible. Une inspection sur place est possible.

An Emag vertical CNC lathe is available. Clamping chuck diameter: 250mm, max. circulation diameter: 270mm, max. machining diameter: 250mm, max. machining length: 175mm, speed: 4500rpm, tool positions: 12, tool holder: VDI 40, travel X/Z: 660mm/300mm, rapid traverse X/Z: 60m/30m/min. Machine dimensions X/Y/Z: approx. 4300mm/1600mm/3300mm, weight: approx. 7500kg, control: Fanuc Series 32i-Model A, operating hours: 64137h. Including automatic loading and unloading with pick-up spindle and integrated part diverter and workpiece storage. Documentation available. On-site inspection is possible.

faceplate diameter: 2650 mmturning diameter over slide rest: 2800 mmturning diameter over plate: 3200 mmturning length: 10000 mmupper slide-adjustment: 250 mmspindle diameter in front bearing: 400 mmspindle turning speed range: 0,35 -1,12 / 1,2 - 56 U/minfeed: 0,05 - 18 mm/Uworkpiece weight: 9000 kgspindle motor: 60 kWmax. workpiece weight between centres: 20000 kgControl: total power requirement: - kWweight of the machine ca.: 93 tdimensions of the machine ca.: m- CNC control NUM 1060- 4-jaw face plate- Steel holder device- Tailstock- Base plate- Roller setting vice- Transverse travel of the top slide: 425 mm- Longitudinal displacement of the main slide in the centre section: 150 mm- Transverse displacement of the centre section on the lower section: 700mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Largeur de la pointe : 430 mm Hauteur de la pointe : 120 mm Alésage de la broche : 23 mm Vitesses de broche : 60-3000 tr/min Tête de broche conique courte DIN 4 Poupée mobile MK2 Avances de 0,03 à 2,5 mm Poids env. 360 kg Nouvel affichage numérique Aikron 3 axes, frein du moteur de broche renouvelé, vérifié techniquement. Accessoires : Pince de serrage, mandrin de tour Support en acier à changement rapide 

: 0460 mm: 270 mm: 1500 mm: 230 mm: 76 mm: 11 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diamètre de tournage : 720 mmLongueur de tournage : 3.000 mmContrôle : FAGOR 8055 TC/B Diamètre de tournage au-dessus du lit : 470 mm Alésage de la broche : 92 mm Nez de la broche : DIN-55027-11 Diamètre de la broche : 150 mm Entraînement de la broche : 17 / 20,5 kWPuissance totale requise : 28 kWPoids de la machine env. : 5,7 tDimensions de la machine env. : mLes données de cette annonce ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.

Key data: 210 mm, 305 mm, 5000 1/min

Tour CNC Marque : Gildemeister Modèle : CTX 200 Contrôle : Heidenhain Pilot 1190 Année de fabrication 1996 Heures de mise en marche : env. 38 000 h Spécifications Diamètre circonférentiel au-dessus du lit 440 mm Diamètre circonférentiel au-dessus du chariot 210 mm Longueur de tournage 305 mm Passage de la barre 42 mm Vitesse 5000 tr/min Tourelle 12 stations Porte-outil 20 VDI Dimensions de la machine L x l x H 2800 x 1651 x 1771 mm Poids de la machine env. 3000 kg Accessoires: Divers porte-outils Mandrin à pince sur la broche principale Poupée mobile Documentation

Contrôle Fanuc 21T Diamètre de tournage 158 mm Diamètre circonférentiel au-dessus du lit 340 mm Vitesse 6 000 min-1 Revolver à 8 vitesses Poupée mobile Mandrin à 3 mors, mandrin à 2 mors, mandrin à pince de serrage Pinces Porte-outils polyvalents

A Gildemeister CNC double-spindle turning and milling center including coolant system and chip conveyor is available. Turning diameter over bed: 640mm, machining diameter: 400mm, center distance: 1930mm, travel X/Z: 550mm/1585mm, travel Y: +/-110mm, B-axis: +/-120° (interpolating), C-axis: 360°. Main spindle: power: 36kW/45kW, speed: 4000rpm, torque: 600Nm-730Nm, bore: 107mm. Milling spindle: Speed: 12000rpm, power: 13.2kW/22kW, torque: 100Nm. Tool places: 60, carrier: turret 12-fold star SW 380, machine dimensions X/Y/Z: approx. 9300mm/4600mm/3100mm, weight: approx. 20000kg, control: Siemens Sinumerik 840D powerline. Documentation available. On-site inspection is possible.

Trois tours horizontaux CNC Okuma sont disponibles. 1) Okuma LB 15 M. 2) Okuma LB 15. 3) Okuma LB 15 W. L’Okuma LB 15 W est défectueux. Une inspection sur place est possible. Vente individuelle possible.

turning diameter over bed: 420 mmturning diameter over slide rest: 290 mmturning length: 900 mmturning diameter in the gap: mmturning speeds: 40 - 2000 U/mincentre height: 210 mmspindle bore: 38 mmtotal power requirement: 4,0 KWweight of the machine ca.: 0,9 tdimensions of the machine ca.: 2,4 x 1,1 x 1,3 mLead and feed spindle lathe- 3-jaw chuck 220mm- Quick-change tool holder with 5 cassettes- Steady rest- Chip tray- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 570 mmturning length: 2000 mmcontrol: total power requirement: 15 kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 410 mmturning diameter over slide rest: 240 mmturning length: 1000 mmturning diameter in the gap: 530 mmturning speeds: 65 - 1810 U/mincentre height: 205 mmspindle bore: 52 mmtailstock quill taper MT: 4 total power requirement: 2,2 kWweight of the machine ca.: 0,9 tdimensions of the machine ca.: 1,9 x 0,8 x 1,3 mCenter lathe with: 3-axis digital measuring system fully assembled electromagnetic main spindle brake auto. Feed in longitudinal and transverse direction safety relay Micrometer end stop coolant device 3-jaw lathe chuck with 1 set of turning and drilling jaws German operating instructions.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 mmturning diameter over slide rest: 264 mmturning length: 1000 mmturning diameter in the gap: 550 mmturning speeds: 44 - 2000 U/mincentre height: 200 mmspindle bore: 52 mmtailstock quill taper MT: 4 MKconnected load frequency: 400 Vtotal power requirement: 1,5 / 2,4 kWweight of the machine ca.: 0,9 tdimensions of the machine ca.: 1,9 x 0,8 x 1,56 m3-axis digital display3-jaw chuck 200 mm.4-jaw chuck 200 mm.Faceplate 320mmbezel fixedrunning bezel4-fold steel holder.Halogen machine lightmachine lightfoot brakeremovable chip tray, chip protection wallHardened and ground bed tracksComplete coolant systemlining protectionmachine toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diamètre de retournement au-dessus du lit/glissière frontale : 360 mm/160 mm, entraxe : 800 mm, course X/Z : 205 mm/810 mm, vitesse : 3150 tr/min, alésage de la broche : 60 mm, positions de l’outil : 8, rotation rapide X/Z : 10 m/min. Dimensions de la machine X/Y/Z : env. 3300mm/1800mm/1800mm, poids : env. 3300kg, commande : Traub System TX-8. Une inspection sur place est possible.

turning diameter over bed: 250 mmturning diameter over slide rest: 145 mmturning length: 550 mmcenter height over bed: 125 mmcentre distance: 550 mmbed width: 135 mmspindle bore: 26 mmturning speed range - stepless: 50 - 2.000 U/minpower requirement: 750 W3-jaw-chuck diameter: 125 mmtaper in tailstock-quill: MK 2 dia. of quill: 30 mmquill stroke: 70 mmvoltage: 230 Vweight of the machine ca.: 120 kgdimensions of the machine ca.: 1,25 x 0,60 x 0,50 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpice diameter max.: 90 mmforward bearing diameter: 140 mmTurning speeds mainspindle: 4.200 U/minPower: 35,5 KWControl: INDEX C 200-4 travel -x axis: 1.500 mmtravel -z axis: 340 mmtravel -y axis: 180 mmb-axis: 360 °CNC turning and milling center vertical | INDEX - V300 equipped with a turret for driven tools as well as y- + B- axis.Further information:- direct measuring system on X + ZThe machine is in good condition.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: V-300 | V 300The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0390 mm : 240 mm : 1250 mm : 190 mm : 54 mm : 5,5 kW

Circulation/rotation Ø over bed: 475 mmRotation/rotation Ø via cross slide: 260 mmSledge path plan: 260 mmcentre distance: 1000 / 1500 / 2000 mmpower capacity: 22 kWGear stages. m= manual / e= electric.: 2 e Spindle head DIN 55026 / DIN 55027: A6 / 6 Spindle Ø in front bearing: 115 mmspindle bore: 78 / 70 mmturning speed range (V-constant): 1 - 3.000 U/minfeed range flat: 1µ - 1.000 mm/Ufeed range lengthwise and thread: 1µ - 2.000 mm/URapid traverse plan/longitudinal: 5 / 10 m/mindiameter of quill: 70 mmquill travel: 120 mmquill inner cone: 5 MKThis machine is used for the production of individual parts and small batches from simple to the most complex contours.It is characterised by:--> Ease of operation Precision Working range

number of spindles: 8 bar capacity: 36 mmcontrol: FANUC 30i-B Subspindle speed: 7.500 U/minBar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system.The machine only has 15.666h spindle hours.The machine is in a well-maintained condition and can be inspected under power.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.The machine works with a EGS loading system ->This can be purchased separatelyAn extensive tool package is included.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: MULTISPRINT36 | MULTISPRINT-36The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hauteur du centre : 102 mmEntraxe : 450 mmAlésage de la broche : 25 mmVitesse de la broche :: 220 - 2600 Poids de la machine env. : tDimensions de la machine env. : mL’exhaustivitédes accessoires n’a pas été vérifiée Les armoires ne sont pas incluses dans la livraison

number of spindles: 8 bar capacity: 36 mmcontrol: FANUC 30i-B Subspindle speed: 7.500 U/minBar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system.The machine only has 6.944h spindle hours.The machine is in a well-maintained condition and can be inspected under power.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.The machine works with a EGS loading system ->This can be purchased separatelyAn extensive tool package is included.The machine video from the production plant will be shared on request.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: MULTISPRINT36 | MULTISPRINT-36The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of spindles: 8 bar capacity: 36 mmcontrol: FANUC 30i-B Subspindle speed: 7.500 U/minBar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system.The machine only has 15.650h spindle hours.The machine is in a well-maintained condition and can be inspected under power.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.The machine works with a EGS loading system ->This can be purchased separatelyAn extensive tool package is included.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: MULTISPRINT36 | MULTISPRINT-36The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 mmturning diameter over slide rest: 280 mmturning length: 1000 mmturning diameter in the gap: mmturning speeds: 70 - 2000 U/mincentre height: 195 mmspindle bore: 54 mmtailstock quill taper MT: 3 MKconnected load frequency: 400 Vtotal power requirement: 2,2 kWweight of the machine ca.: 0.85 tdimensions of the machine ca.: 1,95 x 1,0 x 1,75 mProfessional industrial machine3-axis digital display3-jaw chuck 200 mm.4-jaw chuck 200 mm.Faceplate 280mmBezel fixedBezel rotating4-fold steel holder.Halogen machine lightMachine lightFoot brakeremovable chip tray, chip protection wallHardened and ground bed railsComplete coolant systemFeed protectionMachine feetMachine toolThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.