travail de la tôle machines d'occasion à vendre (3,276)

Largeur de la tôle : 1015 mmLongueur de la plaque : 1015 mmÉpaisseur de la plaque : 6,0 mmCapacité de poinçonnage : 25 tDiamètre du poinçon : 88,9 mmPuissance totale requise : 16 kWPoids de la machine env. : 12000 kgDimensions de la machine env. : 4000 x 2320 x 2300 mm

plate thickness: 6 mmpressure: 12 tcutting range: Breite x Länge 200 mmno. of strokes: 15 Hub/mincutting angle: 30 - 140 °total power requirement: 4 kWweight of the machine ca.: 1,02 tdimensions of the machine ca.: 1065 x 900 x 1210 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 50 mmsquare edge steel: 45 mmL-beam: 150 x 14 mmtotal power requirement: 4 kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: 2,3 x 1 x 2,1 mNo. 34185-fold combined profile steel shears with flat steel shearsPEDDINGHAUS 210 Super 16pressure capacity 80 toRound steel 50 mmSquare steel 45 mmangle steel 150 x 14 mmPunching up to 90 mm diameter5.5 HPSpace requirement 2.30 x 1.0 x 2.1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Poids max. : 5,0 tDiamètre de la pièce : 100 - 2500 mmPuissance totale requise : 2 x 0,37 kWCapacité de charge Unité d’entraînement : max. 2500 kgCapacité de charge Unité de rotation : max. 2500 kgVitesse de rotation de la table : 100 - 1000 mm/minDiamètre de la roue de roulement : 250 x 140 mmPoids de la machine env. : 0,9 tAvec double pédale (start-stop / gauche-droite)Avec télécommande (sur le câble)

pression : 32 tcourse : 250 mmtaille de la table : 500 x 760 mmhauteur de travail max. : 925 mmvitesse de pliage : max. 25 mm/seccapacité du réservoir : 80 lpuissance de pression : 320 barpuissance totale requise : 5,5 kWpoids de la machine env. : 0,8 tdimensions de la machine env. : 1,3 x 0,5 x 1,3 mmax. hauteur de pliage : 200 mmcapacité de coupe max. (st) : 150 x 14Capacité de poinçonnage max. (St) 35Hauteur du guide : 200 mm

table width: 3000 mmtable length: 1500 mmburner heads: 1 Plasma cutting system HEZINGER PlasmaLine EPJ / ECKERTwith extraction system PFC-4 Plus 4kW F3800The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I - beam section - flat steel: 140 x 140 x 13 mmI-beam section - upend: 120 x 120 x 13 mmL-beam: 130 x 130 x 12 mmround bar steel: 85 mmbending capacity - flat iron: 125 25 mmflat steel: 65 x 65 mmincluding various rollers:Pipe Ø:219 mm (tool/roller Ø 535 mm)140 mm (tool/roller Ø 420 mm)273 mm (tool/roller Ø 520 mm)203mm168.3 mm (tool/roller Ø 500 mm)75 mm (tool/roller Ø 400 mm)49 mm (tool/roller Ø 420 mm)48.3 mm (tool/roller Ø 420 mm)22.5 mm (tool/roller Ø 420 mm)32/32.5 mm (tool/roller Ø 420 mm)60 mm (tool/roller Ø 420 mm)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: -- mmworkpiece length: -- mmwork piece width: 0 - 3 mmspeeds: 3600 U/minrange of angles: 30 - 60 (stufenlos) °weight of the machine ca.: 31 kgdimensions of the machine ca.: 530 x 420 x 410 mmMaximum bevel width of 3 mm - Mechanically adjustable bevel angleDesigned for deburring and chamfering steel parts and workpieces.Processing of different materials. Solid and stablemachine construction. Scale for setting the processing depth Security cover Adjustable processing angle For steel, stainless steel, aluminum and other materials Precise, massive and overlong mechanical guide- Number of indexable inserts: 5 pieces (four-sided)- Feed: manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 1050 mm: 5,5 mm: 5,0 mmroll diameter: 130 / 195 mm: 2,2 kW: 1050 kg: 2150 x 900 x 1200 mm- 2 central rollers driven by an electric motor- Swing-out upper beam- Conical bending device- separate control panel- self-braking main motor- CE mark/Declaration of ConformitySpecial equipment included in the price:- hardened rollers- Motorized rear roller adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Epaisseur de la plaque : 1,2 mmDiamètre du rouleau : 62 mmGorge : 100 mmPoids de la machine env. : 50 kgDimensions de la machine env. : 560 x 220 x 500 mm

diameter: -- mmworkpiece length: -- mmwork piece width: 18 mmrange of angles: 15° - 50° °weight of the machine ca.: 110 kgChamfering system UZ18 HARDWORKERMaximum bevel width 18 mm with automatic feedThe UZ18 Hardworker machine is one of the most powerful automatic feed beveling machines on the market. It is not only suitable for workshops, but also for on-site assembly. The machine has a stepless working angle adjustment system. Thanks to the special design of the drive system, the UZ18 Hardworker is also suitable for harder materials. The machine is equipped with the automatic feed. Working with UZ18 Hardworker is therefore very convenient.For conventional steel (up to 600 MPA/87022 PSI strength), brass, copper and aluminum materials For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm Application range of sheet thickness 6 - 40 mm The bevel angle can be easily a ...

pression : 26 tpoinçonnage coupe transversale en mmt : 80 x 2,5 course : - mmpuissance totale requise : 1,5 kWpoids de la machine env. : 3 tdimensions de la machine env. : 3 x 3 x 2,5 mn° 1096 :Revolver perforateur 26 to.EDEL, type SMO 26/660/12 construit en 1973 avec profondeur de gorge 660 mmSurface de travail : diam. 80 x 2,5 mmPuissance d’entraînement : 1,5 kWAccessoires : magasind’outils à 12 stations Divers poinçons et matrices

angular steel - leg outwards: -- mmdouble T-iron on the x-axis: -- mmU-iron on the x-axis: -- mm: 50 mm: 150 mmthroat: 120 mmtotal power requirement: 1,5 kWweight of the machine ca.: 0,36 tdimensions of the machine ca.: 1,1 x 0,8 x 1,4 mExhibition machine NEW, year of construction: 2021The PB 50-3 is a profile bending machine with manual adjustment of thetoprollervia a handwheel.The profile bending machine can be used in vertical and horizontal working position and are equipped with three driven rollers. The change between two or three driven rollers is done simply by the side handle of the machine.- Manual adjustment of the top roller with a handwheel- Vertical and horizontal work possibility- 3 driven rollers- Supplied with a standard roller set- Foot pedalThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacité de coupe : - mmGorge : - mmÉbauche ronde Diamètre max. : 500 mmÉbauche ronde Min. : ? mmPuissance totale requise : kWPoids de la machine env. : tDimensions de la machine env. : m

weight max.: 1200 kgworkpiece diameter: 20 - 800 mmtotal power requirement: 0,75 kWtraversing speed: 80 - 1600 mm/minweight of the machine ca.: 56 kgrange L-W-H: 520 x 470 x 390 mm- For machining cylindrical workpieces- Flat frame- Castors with polyurethane coating- Clear controls- Infinitely variable speed- The control electronics are of a robust and closed housingprotected- With foot switch for start/stop- Drive with DC electric motors and gearsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 5000 kgworkpiece diameter: 250 - 2500 mmtotal power requirement: 0,75 kWtable turning speeds: 100 - 1000 mm/mindiameter of running wheel: 250 x 140 mmweight of the machine ca.: 800 kgrange L-W-H: 2200 x 2500 x 800 mm- For machining cylindrical workpieces- Flat frame- Castors with polyurethane coating- Clear controls- Infinitely variable speed- The control electronics are of a robust and closed housingprotected- With foot switch for start/stop- Drive with DC electric motors and gearsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 3 mmrear stop: 1000 mmdown holder: 18 Stkcutting angle: 0.5 - 1,0° 30° °oil volume: 150 ltotal power requirement: 5,5 kWweight: 4300 kgdimensions of the machine ca.: 3800 x 1950 x 1600 mmFurnishing:- electric back gauge 750 mm- front support plates with ball rollers- Light barrier behind the machine- Hydraulic cutting adjustment- Cutting gap regulation via handwheel- LED cutting edge lighting- 1x side stop with scale 1500 mm- 1x freely movable foot switch- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 40 mmpre-bending: 32 diameter of upper rolls: 460 mmdiameter of lower rolls: 420 mmside roll diameter: 360 mmpower capacity: 30 kWmin. bending diameter: 1380 mmweight of the machine ca.: 30,1 tdimensions of the machine ca.: 6,3 x 2,3 x 2,6 m4 Rolls Hydraulic Bending MachineStandard Features:- hardened and polished rolls- complete body made of ST-52 steel- hydraulically opened/closed drop end controlled from control panel - digital readout for side rolls- top and bottom rolls are driven by hydraulic and gearbox. Bottom rolls vertical movements are hydraulic powered- separate control panel- oil cooler - conic bending- in accordance to CE-norm- Warranty 12 monthsOptional Accessories:- variable speed of rotation (5.858,00 Euro)- material feeding table (5.100,00 Euro)- center support (18.750,00 Euro)- 2 x side supports (15.000,00 Euro)The data for this ad  ...

Largeur de la tôle - max. : 200 mmÉpaisseur de la plaque : 6 mmPlat Acier : 70 x 7 mmBarre ronde Acier : 13 mmPoids de la machine env. : 50 kgDimensions de la machine env. : 800 x 500 x 1800 mm

Epaisseur de la plaque : 0,8 mmGorge : 180 mmDiamètre du rouleau : mmPoids de la machine env. : 22 KgDimensions de la machine env. : 500 x 450 x 160 mmLa bordeuse est équipée de :- Interrupteur d’urgence- Pédale de commande- 7 pcs. Ensembles de rouleaux

Tool trolley, workshop trolley, mobile workshop trolley, drawer cabinet-Width: 560 mm-Depth: 665 mm-Height: 800 mm-Weight: 78 kg

Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper-Span width: 80 - 350 mm-Load capacity: 5000 kg-Dimensions: 410/210/H400 mm-Weight: 15.5 kg

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper-Sheet metal claws-Span width: 0 to 50 mm-Load capacity: 4000 kg-Number: 1x terminals available-Price: per piece-Weight: 21 kg/piece

Punching units, punching unit, punching frame, punching tool, non-driven latch and shear units, forming frame-Transfer in current condition as seen-1x: punching bracket as shown in the pictures-Manufacturer: CEWE-1x: type LWS 35-150-Dimensions: 300/80/H220 mm-Weight: 13 kg

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper-Sheet metal claws-Span width: 0 to 40 mm-Load capacity: 3200 kg-Number: 1x terminals available-Price: per piece-Weight: 21 kg/piece

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper-Sheet metal claws-Span width: 25 to 75 mm-Load capacity: 2500 kg-Number: 1x terminals available-Price: per piece-Weight: 21 kg

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper-Sheet metal claws: with plastic insert-Span width: 0 to 10 mm-Load capacity: 500 kg-Number: 2x terminals available-Price: per piece-Weight: 6 kg/piece

Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake-Tool for: press brake-Dimensions: 3000/30/H116 mm-Weight: 48 kg

Base for folding tool, bending tool, die, lower knife, lower tool, prism tool, reversible prism, 1-part die block for die bending machine-Tool for: press brake-Support for: press brake tool-see drawing: at the photos-Number: 2x documents available-Price: per piece-Dimensions: 3600/110/H32 mm-Weight: 76 kg

: Hebefix A10 poids max. : 10 tpoids de la machine env. : 49 kg (2 Stück) kg :