travail de la tôle machines d'occasion à vendre (3,308)

Machine à poinçonner FB Finn-Power A5-25 Type : Machine à poinçer Fabricant : Finn-Power Modèle : A5-25 FB Année de fabrication : 1999 Capacité de poinçage : 23 t Épaisseur maximale de la feuille : 4 mm Poids approximatif de la machine : 12 000 kg Dimensions totales approximatives (L x F x H) : 6000 x 6000 x 2000 mm Débits d’avance sur les axes X/Y : 2500/1250 mm Logiciel JETCAM Outils : inclus Table à pinceaux Pression hydraulique maximale : 300 bar Alimentation : 3 x 400 V, 50 Hz Fonctionnalité non testée Cet article est livré chargé sur camion. Les coûts de démontage et de chargement sont spécifiés comme des coûts supplémentaires. Auction-ID: A1-51153-6

material width:600 mmcoil weight:5,0 tmaterial thickness: - 5,0 mmcoil internal diameter:360 - 660 mmcoil external diameter:1500 mmno. of straightening rolls:9 straightening roll diameter:80 mmnumber of draw-in rolls:2 material cross-cut:1600 mm²weight of feeeder-straightener:2,5 tweight of decoiler:1,5 tdimensions feeder-straightener (WxDxH):1,7 x 1,7 x 2,6 mmdimensions decoiler (WxDxH):1,8 x 2,0 x 2,3 mmfeeder-straightener:VCRL 650, Bj. 1994, GR 2001 height adjustment:motorisch alligator opening:hydraulisch decoiler:SHR 5000, Bj. 2000 expansion:hydraulisch

plate thickness:4 mmblade length:180 mmweight of the machine ca.:21 kgdimensions of the machine ca.:400 x 100 x 1500 mm

material width:200 mmmaterial thickness:0,5 - 3,0 mmno. of straightening rolls:6 straightening roll diameter:70 mmnumber of draw-in rolls:2 diameter of draw-in rolls:160 mmpower requirement:3,1 kWweight:1,1 tdimensions (WxDxH):1,5 x 1,2 x 1,9 m

material width:350 mmcoil weight:2,0 tcoil internal diameter:470 - 530 mmcoil external diameter:1500 mmpower requirement:1,0 kWweight:1,5 tdimensions (WxDxH):1,3 x 1,6 x 1,9 m

Marque : Metaleen Tools & Equipment (visible sur le cadre de la machine). Type : WE67K-160T/3200. Année de fabrication : 2025, déduit du numéro de série/date de commande. Numéro de série : 2025040195. Capacité : 160 tonnes. Longueur de travail mm : 3200 mm. Contrôle, marque, type : Delem DA-53T-[N], numéro de série 244400017, Delem PN D8087-007, version logicielle V1.8.23, produit par Delem, Eindhoven (NL). Auction-ID: A3-46142-11241

sheet width: 3100 mmplate thickness: 6 mmstroke: 160 mmrear stop: 1000 mmtotal power requirement: 5,5 kWmachine weight ab.: 6.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

punching pressure: 70.0 tpunch diameter: 26.0 in 20.0 mmpunch diameter: 57.0 in 9.0 mmthroat: 305 mmround bar steel: 45.0 mmsquare edge steel: 45.0 x 45.0 L-beam: 130 x 13 mmshear: flat material: 300 x 20.0 / 375 x 15 mmblade length: ca. 380 mmadjustment of stroke: 0 - 55 mmstrokes per minute: 34 work height max.: 1030 / 890 mmrectangle notching till: max. 10.0 mm STvoltage: 400 Vtotal power requirement: 5.5 kWweight: 1620 kgdimensions: 1700 x 1000 x 1800 mm Well-maintained condition () Current new price ~ 20.000 euros Special price upon requestFeatures:- Robust electro-hydraulic structural steel shear- Equipped with multiple workstations: Punching station Flat bar shear Angle/profile steel shear Notching station- Infinitely adjustable stroke length- Very compact design- Support table at the notching and punching stations- Lateral support surfaces- 2x mobile foot switches- Connection cab ...

punching pressure: 36.0 tpunch diameter: 27.0 in 10.0 mmthroat: 170 mmround bar steel: 30.0 mmL-beam: 80 x 80 x 8 mmsquare edge steel: 25 x 25 mmshear: flat material: 350 x 6 / 200 x 13 mmblade length: 356 mmstrokes per minute: ca. 24 pro Minwork height max.: 980 mmoil volume: 30.0 lvoltage: 400 Vtotal power requirement: 2.2 kWweight: 485 kgdimensions: 1200 x 800 x 1500 mm From a maintenance workshop Original price of base machine ~ 12.000 euros Special price upon request Features:- Compact electro-hydraulic structural steel shears- Punching station, flat steel shear, angle/profile steel shear- Sturdy welded construction- Very compact design- Side support surfaces - Various punches and dies (red metal box)- 1x freely movable foot switch- Emergency stop button- Operating instructions (PDF)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 60.0 tpunching cross-cut in cmm: 28 in 15 / 38 in 11 mmsquare edge steel: 35 x 35 mmL-beam: 120 x 120 x 12 mmround bar steel: 40.0 mmflat steel: 200 x 20 / 300 x 15 mmblade length: 317 mmthroat: 220 mmwork height max.: 940 / 1140 mmstrokes per minute: max. 26 work stroke: max. 55.0 mmoil volume: 23.0 ltr.total power requirement: 4.0 kWweight of the machine ca.: 1440 kgDimensions (HxWxD): 1510 x 590 x 1570 mm From a maintenance workshop Original price of base machine ~ 14.000 euros Special price upon requestFeatures:- Robust electro-hydraulic structural steel shear- Punching station, flat steel shear, . angle/profile steel shears, notching station- heavy-duty and stable welded construction- infinitely variable stroke adjustment- very compact design- support table at notching and punching stations- side support tables- 1x freely movable control panel - Emergency stop button- Oper ...

pressure: 50.0 tpunching cross-cut in cmm: 27.0 in 14.0 mm STround bar steel: 32 + 17 mmsquare edge steel: 30 + 18 mmL-beam: 100 x 10 mmthroat: 200 mmshear: flat material: 190 x 10 mmblade length: 200 mmstroke - stepless adjustable: 10 - 28 mmstroke: 14 - 28 H/mintotal power requirement: 4.0 kWweight: 900 kgrange L-W-H: 950 x 650 x 1730 mm from a maintenance workshop in good condition ()Equipment:- Compact electro-hydraulic combined structural steel shear with notching station with punching station flat bar shear angle steel shear round and square bar shear- Support table at the notching station- Support table at the punching station- Stripper at the punching station- 1x mobile foot switch- Assortment of various punches and dies- Original operating manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Presse hydraulique pour dégagement des tuyaux hydrauliques, équipée de tous les coins nécessaires pour des tuyaux de 0,5 à 50 mm, jamais utilisée à 0 heure et emballée dans une caisse en bois Dimensions totales : 1000 x 1000 x 1200 mm Poids : 310 kg Auction-ID: A7-50799-110

Matériau du manche : acier chromé Matériau de la tête de flexion : aluminium Pour les tubes en cuivre et en aluminium : ce plieur de tuyaux convient aussi bien aux tubes en cuivre qu’en aluminium, ce qui le rend polyvalent. Courbure précise jusqu’à 180 degrés : grâce à la répartition des degrés, vous pouvez effectuer n’importe quelle courbure jusqu’au degré. Pour les tuyaux de diamètre 8-10-12 mm : adaptés à différents diamètres, il suffit donc d’un seul outil pour plusieurs travaux. Poignée en caoutchouc : Pour un confort supplémentaire au travail, même après une longue journée de travail. Longueur : 340 mm Largeur : environ 48 mm Auction-ID: A1-40900-60

Jusqu’à 42 mm, avec divers accessoires, rotatifs à gauche et à droite, avec table d’alimentation et de décharge, affichage numérique Auction-ID: A1-50660-646

- Force 4100 kg. - Actionnement de la pédale. - Conditions de fonctionnement de cette machine : non vérifiées. - Cet article est livré chargé par camion. Les coûts de démontage et de chargement sont ceux spécifiés comme coûts supplémentaires. Auction-ID: A7-50834-604

Auction-ID: A1-50660-628

Équipé d’une table d’alimentation et de 3 bacs métalliques Auction-ID: A1-50660-630

Équipé d’une longueur de conduite d’alimentation d’environ 12 mètres Ainsi que la canopée Auction-ID: A1-50660-800

Jusqu’à 55 mm, avec divers accessoires Auction-ID: A1-50660-647

- Conditions de fonctionnement de cette machine : non vérifiées. - Cet article est livré chargé par camion. Les coûts de démontage et de chargement sont ceux spécifiés comme coûts supplémentaires. Auction-ID: A7-50834-602

I - beam section - flat steel: 100 x 15 (d 400) mmI-beam section - upend: 60 x 10 (d 500) mmL-beam: 50x50x6,0 (d 600) mmround material: 35.0 (d 500) mmbar material dia. max.: 70 x 1.5 (d 1500) mmsquare material: 50x50x3.0 (d 1400) mmbending speed: 8.5 U/minroll diam. toproll: 152 / 162 mmbore: 40.0 mmStroke length: 120 mmvoltage: 400 Vtotal power requirement: 1.1 kWweight: 470 kgrange L-W-H: 900 x 600 x 1100 mm Original price with accessories: approx. 10.000 eurosFeatures:- Two driven rollers (lower rollers)- Manual feed of the upper roller- Horizontal and vertical working positions- Shafts mounted with tapered roller bearings- Lateral, manually adjustable stop rollers- 1 set of standard rollersâsplit - 1 sets of tube rollers- 1 freely movable control unit- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I - beam section - flat steel: 120 x 20 (d 750) mmI-beam section - upend: 60 x 10 (d800) mmL-beam: 50 x 5 (d 1200) mmbar material - diameter: 35.0 (d 800) mmbar material dia. max.: 70 x 3.0 (1200) mm: 50.0 mmdiameter of upper rolls: 155 mmdiameter of lower rolls: 155 mmStroke length: 150 mmRotating speeds: 9.0 U/mintotal power requirement: 1.3 kWweight: 305 kgrange L-W-H: 900 x 700 x 1500 mmFeatures:- Robust electric-motor-driven ring/profile bending machine- Machine base frame with rear storage shelf- Can be used in both horizontal and vertical orientations- Equipped with a wide variety of roller sets Split roller segments Pipe rollers - Electro-hydraulic feed of the upper roller- Manually adjustable side/alignment rollers- 1 freely movable control panel - Base frame with forklift pockets For easy transportThe data for this ad was created with ModulMWS - the software solution of LogoT ...

I - beam section - flat steel: 120 x 20 (d 750) mmI-beam section - upend: 60 x 10 (d800) mmL-beam: 50 x 5 (d 1200) mmbar material - diameter: 35.0 (d 800) mmbar material dia. max.: 70 x 3.0 (1200) mm: 50.0 mmdiameter of upper rolls: 155 mmdiameter of lower rolls: 155 mmStroke length: 150 mmRotating speeds: 9.0 U/mintotal power requirement: 1.3 kWweight: 305 kgrange L-W-H: 900 x 700 x 1500 mmFeatures:- Robust electric-motor-driven ring/profile bending machine- Machine base frame with rear storage shelf- Capable of horizontal and vertical operation- Equipped with a wide variety of roller sets Split roller segments Pipe rollers- Manual feed of the upper roller- Analog position indicator for the upper rollers (scale)- Manually adjustable side/aligning rollers- Base frame with forklift pockets For easy transportThe data for this ad was created with ModulMWS - the software solution of LogoTe ...

: neu : 2025 : 090080 : prompt, Zwischenverkauf v : Türkei : 32100 €: 613.11 €: 1 : 3100 mm: 4 mm: 42 1/min: 1,5 °: 750 mm: 7.5 kW: 2 Stk.: 800 mm: 450 mm: 3700 mm: 2300 mm: 1350 mm: 3730 kgmot. back gauge with digitalreadout DT 5hold down with rubber padsside lay with T-sluts2 supporting armsball in the tabletape measuretilt stoplight barriers on the back of the machinecutting line illuminationuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 6500 mmplate thickness: 3 mmback stop - adjustable: 1000 mmdimensions: 7300x2400x2300 mmWeight: 20000 kgEquipment/accessories:- 1 x set of knivesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

puncher: 55 tround bar steel: 40 mmsquare edge steel: 40 mmL-beam: 120 x 120 x 10 mmhole punching press: capacity (dia. x thick.): Ø 40 x 10 mmshear: flat material: 300 x 15 mmthroat: 250 mmwork stroke: 60 mmwork height max.: 1085 mmtotal power requirement: 4,0 kWweight: 1300 kgrange L-W-H: 2000 x 900 x 1800 mmEquipment:- Electro-hydraulic structural steel shears with 4 workstations Flat steel shears Structural steel shears Punch press Notching station- Driven by two hydraulic cylinders- Infinitely variable stroke adjustment- Support table at the hole-punching The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2050 mmplate thickness: 6.0 mmcutting angle adjustment: 0.5 - 3.0 °down holder: 12 Stückno. of strokes: 8 - 14 Hub/minback stop - adjustable: 750 mmwork height max.: 770 mmControl: konv. total power requirement: 7.5 kWweight of the machine ca.: 3800 kg.range L-W-H: 2650 x 2100 x 1750 mm From a maintenance workshop Very good condition () Features- Robust, slide-guided electro-hydraulic panel shear- HACO control panelâfront left Easy operation directly at the cutting table Adjustment of cutting angle and backgauge Emergency stop button, latching - Electromotor-driven material stop/backgauge Fine adjustment with handwheel (front left)- Electro-hydraulic cutting angle adjustment- Manual cutting gap adjustment, from the front Eccentric adjustment - 1x long side stop - Front finger guard- 1x freely movable foot switch- Rear sheet metal chute- Operating instructionsThe data f ...

sheet width: 1550 mmplate thickness: 6.5 mmpre-bending: 4.5 mmdiameter of upper rolls: 150 mmside roll diameter: 130 mmdiameter of lower rolls: 150 mmdistance: max. OW zu UW 20.0 mmvoltage: 400 Vtotal power requirement: 1.1 + 2.2 kWweight of the machine ca.: 2370 kgrange L-W-H: 3300 x 1150 x 1110 mm Rarely used, according to the previous owner Current new price approx. 25.000 euros Special price upon request (!)Features:- Electro-hydraulic 4-roll plate bending machine Equipped with a driven top roll and bottom roll Sturdy welded construction- Application range: Light to heavy-duty sheet metal processing (steel/aluminum/stainless steel)- Electro-hydraulic adjustment of the bottom and side rolls- Linear guidance for the side rolls- Top roll driven by a robust electric motor and planetary gearbox- Mobile, separate control console- Hardened, crowned rolls (SAE 1050 / CK 45 steel)- Conical be ...

: neu : 090253 : November 2026, Zwischenve : Türkei : 21600 €: 414.72 €: 2550 mm: 2.5 mm: 35 1/min: 750 mm: 3 kW: 2 Stk.: 850 mm: 400 mm: 2860 mm: 1350 mm: 1200 mm: 1500 kgMotorized back gauge 750 mmPneumatic sheet supportHolddown with rubberMoveable foot switchSquaring arm2 supporting armsPhotocell-protection on the back sideUser manual in GERMAN or ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cisailles à impact Schechtl / Ciseaux guillotine • Fabricant : Schechtl • Type : SJS 5 • Année de construction : 1967 • Numéro d’usine : 2120 • Cisaillements à impact manuels / cisailles guillotine • Version à commande manuelle • Construction robuste en acier • Positionnement manuel des matériaux • Butée réglable • Volant pour le réglage • Grosse filée de matériaux • Fonctionnement mécanique sans entraînement électrique • Conception autoportante économe-espace. • Machine d’occasion • Signes d’usure et de corrosion dus à l’âge et à l’utilisation • L’état selon les photos Auction-ID: A1-50373-2272