69 WEINGARTEN machine à vendre

Presse excentrique à colonne unique WEINGARTEN type E 40Masch. N° 643/62 Année de construction 1963Capacité de pression 40 tonnes. Saillie 250 mmOuverture de la table 150 x 80 et 200 mmSurface de la table 560 x 460 mmSurface du piston 250 x 200 mmCourse du piston réglable 8-88 mmRéglage du piston 63 mmHauteur d’installation 320 mmTrou d’épingle 40 mmVitesse de course 100/130 coups / min. Puissance du moteur 2,2 / 3 kWRonement net 400 volts, 50 HzHauteur de la table au-dessus du sol 840 mm- Combinaison embrayage-frein par accouplement fileté à friction WEINGARTEN avec PMH

Presse excentrique à colonne unique WEINGARTEN type ERV 40Masch. N° 537 / 65 Année de construction 1965Force de compression 40 tonnes. Saillie 230 mmDimensions de la table 570 x 470 mmSurface du piston 250 x 200 mmTrou de goupille de serrage 40 mmHauteur d’installation max. env. 520 mmRéglage de la course 8 - 88 mmPlage de réglage du piston 63 mmVitesse de course 70 coups par minutePuissance d’entraînement 3 kWRaccord net 380 volts, 50 Hz- Réglage de la hauteur de la table- Protection contre les surcharges par plaque d’écrasement- Combinaison embrayage-frein par accouplement fileté à friction WEINGARTEN-

Presse excentrique à colonne unique WEINGARTEN type ER 63Masch. N° 52A / 63 Année de construction 1963Capacité de pression 63 tonnes. Projection 280 mmSurface de table 630 x 530 mmCourse du piston réglable 8-100 mmRéglage du piston 63 mmVitesse de course 65 coups / min. Puissance du moteur 4 kWRondon net 380 Volt, 50 Hz- Combinaison embrayage-frein par embrayage à friction filetée- Libération électrique de la course par pédale- Compteurs de roues- Protection contre les surcharges par plaque d’écrasement- Vilebrequins avant Palebrequin de supportEspace requis L x l x H 1500

voir l’image dans l’appendice

Weingarten AR 63 tonnesCapacité : 63 tonnes Course maximale réglable : 8 > 100 mm Vitesse d’étirage : 56/84 str/min Dimension de la table : 620 x 500 mm Diamètre trou de la table : 250 mm Diamètre du porte-poinçon : 40 mm Réglage de la trajectoire : 63 mm Poids : 4 tonnes

CONTROLS   conventional PRESS DESIGN   drive system: eccentric / crank   frame design: C-frame, single sided PRESS FORCES   total force (nominal): 100 to SLIDE   slide force: 100 to   stroke rate (max.): 72 /min SLIDE (MECHAN. PRESS)   slide adjustment: 80 mm   stroke adjustment: yes   stroke min.: 8 mm   stroke max.: 112 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 407 mm ATTACHMENTS (PRESSES)   2-hand engagement: yes for safe tools only

Ram, rams for an eccentric press, single column press, punching machine, single column eccentric press, eccentric press - single column, press -Spare part: comes from a Weingarten eccentric press -Stroke adjustment: 10-80mm -Plunger area: 320 x 65 mm -Plunger mount: O 40 mm -Plunger adjustment thread: M64 x 6 mm -Plunger adjustment ball head: approx. 92 mm -Dimensions: 875/320/H190 mm -Weight: 164 kg -Pressure unknown

Force de pression : 100 t, course : 60/min, course de la pression : 8 mm-137 mm, réglage de la pression : 80 mm, profondeur de gorge : 375 mm, dimensions de la table X/Y/Z : 800 mm/630 mm, dimensions de la machine X/Y/Z : environ 1500 mm/2400 mm/3500 mm, poids : environ 8800 kg. Une inspection sur site est possible.

Force de pression : 3150kN, dimensions de la table X/Y : 2500mm/1600mm, course (fixe) : 280mm, vitesse de course : 20-80 coups/min, poids : env. 68000kg. Y compris la ligne de transfert et d’alimentation Dreher. Le système de contrôle est défectueux. Documentation disponible. Une inspection sur place est possible.

Pression : 25 Gorge : 200 mmCourse : mmPression : 25 Tno. Nombre de courses : 140 Moyeu/minfenêtre dans le cadre : 240 mmRéglage de la course : 8...80 mmRAM - Plage de réglage : 50 mmSurface du vérin : 355 x 220 mmTaille de la table : 560 x 400 mmTrou dans la table : 160 mmPuissance totale requise : 3 kWPoids de la machine env. : 2,23 tDimensions de la machine env. : m- distance glissière de la table : 250 mmLes données de cette annonce ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.

pressure: 40 t throat: 240 mm stroke: 8-88 mm no. of strokes: 57/86 Hub/min ram - range of adjustment: 63 mm table surface area: 560x450 mm ram surface: 240x200 mm hole in the table: Ø100 mm table height: 840 mm tool hole in ram: Ø40 mm weight of the machine ca.: 3,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 t throat: 280 mm stroke: 8 - 112 mm no. of strokes: 30 - 120 Hub/min distance table/ram, max. stroke up, adjustment up: 500 mm table surface area: 840 x 580 mm hole in the table: 150 mm table height over floor: 910 mm passage to the back: 640 mm ram surface: 560 x 300 mm ram adjustment: 80 mm power capacity: 7,5 kW total power requirement: kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 1,4 x 2,3 x 3,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t throat: 280 mm stroke: 8 - 100 mm no. of strokes: 65 Hub/min ram adjustment: 63 mm table surface area: 620 x 500 mm distance table/ram, max. stroke up, adjustment up: 415 mm hole in the table: 230 mm table height over floor: 800 mm ram surface: 310 x 255 mm power capacity: 5,5 kW total power requirement: kW weight of the machine ca.: 3,95 t dimensions of the machine ca.: 1,20 x 1,80 x 2,40 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacité de la presse : 30 tonnes Profondeur de la gorge : 160 Course du vérin réglable : 20 - 45 mm Réglage de la glissière : 10 / 60 mm Hauteur de fermeture (course vers le bas, réglage vers le haut) : 220 mm Surface de la table : 470 x 300 mm Surface de la glissière : 250 x 190 mm Nombre de courses : 80 - 240 s.p.m. Puissance requise : 4 kW Dimensions L x l x H : 1.400 x 1.800 x 2.000 mm Poids de la machine env. : 2,67 tonnes

pressure: 160 t no. of strokes: 40 - 120 Hub/min sheet width: mm total power requirement: 40 kW Pressing capacity 160 ton Table clamping area 1,100 x 1,280 mm Ram clamping area 850 x 890 mm Distance between guides 1,120 mm Distance between columns (below guide ways) 1,350 mm Distance between Table and ram in upper position approx. 400 mm No. of strokes 40 - 120 /min Adjustment of stoke 67 / 115 / 160 mm Ram adjustment, motor driven 125 mm Ejector travel 50 mm Total electrical load, approx. 40 kW - 500 V - 50 Hz Weight, approx. 24,000 kg Accessories / Special Features WEINGARTEN Sheet Metal Uncoiler with overhead loop control (space saving because it does not need a loop-pit). Strip width 375 mm. The loop control guides the strip-material from the uncoiler to the machine thru a straightening device with automatic supervision. 8-track slide bearing guide. Automatic oil-circulation lubr ...

pressure: 125 t throat: 330 mm stroke: 20-120 mm no. of strokes: 50 Hub/min ram - range of adjustment: 100 mm table surface area: 800x640 mm ram surface: 500x400 mm hole in the table: Ø 330 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 8 t dimensions of the machine ca.: 1500x2000x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t throat: 320 mm stroke: 8-100 mm no. of strokes: 120 Hub/min ram - range of adjustment: 63 mm table surface area: 860x620 mm ram surface: 540x360 mm hole in the table: Ø 270 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,5 t dimensions of the machine ca.: BxTxH 1500x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 500 t distance between columns: 1600 mm stroke: 60 mm max. ram stroke: 60 1 / min ram adjustment: 100 mm dayligth: 700 mm Table area: 1600x1400 mm ram surface: 1400x1150 mm total power requirement: kW weight of the machine ca.: 40 t dimensions of the machine ca.: m About usmore than 400 machines in the warehouse over 12000 m² storage area, crane capacity 70 tmore than 1000 items accessories for your workshopYou want to sell machines production lines or your company, then talk to us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 410 mm stroke: 8-112 mm no. of strokes doubel-strokes per min.: 55 / 82 ram - range of adjustment: 80 mm table surface area: 950 x 700 mm ram surface: 700x450 mm hole in the table: Ø 280 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 7,0 t dimensions of the machine ca.: 1400x2200x2800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 t throat: 300 mm stroke: 8-112 mm no. of strokes: 60 Hub/min ram adjustment: 80 mm table surface area: 700x550 mm ram surface: 400x300 mm table height: 870 mm hole in the table: Ø 280 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,0 t dimensions of the machine ca.: 1500x2000x2700 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 t throat: 230 mm stroke: 8-88 mm throat: 230 mm no. of strokes: 130 Hub/min ram - range of adjustment: 63 mm table surface area: 560x450 mm ram surface: 250x200 mm hole in the table: Ø 190 mm table height: 790 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 3,0 t dimensions of the machine ca.: 1000x1800x2500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t throat: 280 mm stroke: 8-100 mm ram surface: 310x260 mm table surface area: 620x500 mm hole in the table: Ø 250 mm no. of strokes: 56/84 Hub/min ram - range of adjustment: 63 mm weight of the machine ca.: 4,0 t dimensions of the machine ca.: 1200x1900x2800 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 410 mm stroke: 8-112 mm no. of strokes: 55/82 Hub/min ram - range of adjustment: 80 mm table surface area: 950x700 mm ram surface: 700x450 mm hole in the table: Ø 280 mm table height: 800 mm total power requirement: 11 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: BxTxH 1600x2200x3000 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 t throat: 320 mm stroke: 8-112 mm no. of strokes: 60 Hub/min ram - range of adjustment: 80 mm : 355 mm table surface area: 720x550 mm ram surface: 400x310 mm sheet thickness - max.: 11 mm weight of the machine ca.: 9,5 t Overall size: 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 10 t throat: 170 mm stroke: 6-60 mm no. of strokes: 160 Hub/min ram - range of adjustment: 40 mm table surface area: 420x320 mm ram surface: 180x140 mm hole in the table: Ø 120 mm table height: 850 mm tool hole in ram: Ø 32 mm weight of the machine ca.: 1 t dimensions of the machine ca.: 1200x1200x1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 t throat: 280 mm stroke: 8-112 mm no. of strokes: 55 / 82 Hub/min ram - range of adjustment: 80 mm table surface area: 800x570 mm ram surface: 560x355 mm hole in the table: Ø 280 mm table height: 800 mm tool hole in ram: Ø 50 mm total power requirement: 7,5 kW weight of the machine ca.: 6 t dimensions of the machine ca.: BxTxH 1600x2200x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t throat: 330 mm stroke: 8-100 mm no. of strokes: 56/84 Hub/min ram - range of adjustment: 63 mm table surface area: 850x600 mm ram surface: 550x360 mm hole in the table: Ø 240 mm table height: 800 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 4,5 t dimensions of the machine ca.: 1300x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pression : 100 t Gorge : 415 mm course : 8-140 mm Nombre de courses : 48 Moyeu/min vérin - plage de réglage : 80 mm Surface de la table : 920x670 mm Surface du vérin : 700x450 mm Hauteur de la table : 800 mm Trou d’outil dans le vérin : 50 mm Poids de la machine env. : 8 t Dimensions de la machine env. : LxTxH 1500x2000x2800 mm