aléseuses, centres d'usinage machines d'occasion à vendre (532)

- Puissance totale installée : environ 15 KW. - Surface de travail utilisable d’environ 2900 x 1000 mm. - Hauteur du passage sur panneau : 180 mm. - Déplacement sur l’axe X : 3300 mm, déplacement sur l’axe Y : 1280 mm, déplacement sur l’axe Z : 200 mm. - Vitesse maximale de course dans les directions x-y-z : 67-67-22 m/min. - Électrobroche avec changement manuel d’outil. - Groupe scie pour le creusement dans la direction de l’axe X. - Trous verticaux dans la direction de l’axe x : 5. - Trous verticaux dans la direction de l’axe y : 6. - Trous horizontaux dans la direction de l’axe x : 1 + 1 (LA TÊTE EST MANQUANTE). - Trous horizontaux dans la direction de l’axe y : 1 + 1. - Contrôle numérique ESA KVARA 6. - Panneau de contrôle à distance. - 6 bancs avec 14 ventouses au total. - Pompe à vide BECKER. - Conditions de fonctionnement de cette mac ...

working length X: 1.600 mmworking length Y: 800 mmworking depth Z: 190 mmWorkpiece dimensions: mmWorkingpiece thickness from to: mmMotor output: 2,2 kWNumber of axles: St.Number of milling agregates: St.Number of heads vertical: St.Number of heads horizontal: St.Overall size: mmWeight: ca. 450 kgYear: 2018 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Peut être démonté par le client jusqu’à l’extraction métallique. Équipé d’un ordinateur de contrôle et de deux plaques métalliques ergonomiques de 230 x 188 cm. Auction-ID: A1-50226-2

Auction-ID: A1-50377-278

Machine d’alésage à boiseries multi-broches avec table de travail, guides réglables et trois pinces pneumatiques fixées sur une poutre en tête. Équipée d’un volant à réglage latéral et d’une boîte de commande électrique. Numéro de série : PZB000074. Alimentation électrique : 380 V, 50 Hz. Poids approximatif : 750 kg. Fabriqué en Italie. Auction-ID: A1-50699-33

Machine d’alésage à boiseries multi-broches avec table de travail, guides réglables et trois colliers pneumatiques montés sur une poutre en tête. Équipée d’une tête de forage, d’un volant de réglage et de tuyaux pneumatiques. Numéro de série : 440181. Alimentation électrique : 380 V, 50 Hz. Poids approximatif : 770 kg. Fabriqué en Italie. Auction-ID: A1-50699-35

Machine de menuiserie à plusieurs broches avec guides en aluminium réglables et deux colliers pneumatiques montés sur une poutre en tête. Équipée d’un régulateur de pression pneumatique, d’un manomètre, d’une pédale de pied et de commandes avant avec un bouton d’arrêt d’urgence. Année : 2003. Numéro de série : 300708. Alimentation électrique : 380 V, 50 Hz. Courant nominal : 4,7 A. Fabriqué en Italie. Auction-ID: A1-50699-34

Auction-ID: A1-50699-49

Centre d’usinage CNC Biesse Rover A3.30 avec pompe à vide Becker Centre d’usinage CNC pour menuiserie avec poutres de support ajustables et pods de vide. Comprend une cabine de contrôle avec moniteur, clavier et souris, panneau de contrôle sur piédestal séparé, commandes au pied, tapis de sécurité au sol, clôture de sécurité et tuyaux d’extraction connectés à la machine montrés sur les photographies. Accumulation visible de poussière et signes d’usure. Pompe à vide incluse : - Marque : Becker - Type : PICCHIO 2200 - Année : 2007 - Numéro de série : 2157149 - Vitesse : 1 420 / 1 720 tr/min - Puissance moteur requise : 1,8 / 2,5 kW - Capacité d’entrée : 90 / 108 m³/h - Vide : 130 / 130 mbar - Fabriqué en Allemagne Auction-ID: A1-50699-7

Largeur maximale de la pièce : 450 mm Épaisseur maximale de la pièce (hauteur) : 300 mm Longueur maximale de la pièce : 13 500 mm (13,5 m) Équipement : Coupeuse cylindrique 350 mm x 120 mm Fraise 160 mm x 40 mm - 2 pièces Lame de scie circulaire diamètre 700 mm 2 pièces Coupe-queue d’aronde montée sur la coupeuse cylindrique Fraise à queue d’aronde pour fraise Fraise de 100 mm x 30 mm montée sur une unité horizontale Loctc U E Heymz Unité de Rainures en Chaîne Uhezoaa Unités de forage : 1 verticale, 1 horizontale Marqueur d’encre vertical à la sortie de la machine Auction-ID: A7-50825-1

bore capacity in steel (diameter): . mmthroat: 285 mmbore stroke: . mmThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): . mmthroat: 368 mmbore stroke: . mmfeed: 0,1-6,18 m/mintable surface area: 560x470 mmThread-cutting deviceThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drilling capacity in St 60: 30 mmthreading in St 60: M 16 threading in GG 20: M 20 Short spindle: MK 3 bore stroke: 140 mmthroat: 293 mmcolumn diameter: 115 mmMachine table - usable table surface: 514x360 mmT-Slots Amount - Width - Distance: 2 x 14 x 224 mmDistance spindle - machine table min./max.: 132/724 mmfeed: Hand spindle turning speed range: 225-4300 UpMheight of the machine: 1790 mmtotal power requirement: 1,0/1,6 kWStandard equipment:- Mushroom pushbutton (latching) for EMERGENCY STOP- Reversing switch for right-left rotation- Motor protection switch- Speed adjustment stepless- Speed display digital- Protection IP 54- Connector (fully assembled, cable length 2 m)- Spindle protection with electrical protectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 1 tstroke: / mmclamping width: / mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bore diameter: , mmNumber of heads horizontal: , St.Number of heads vertical: , St.2 pcs. Götzinger drilling and milling centers----------------------------------------For sale on behalf of a customer!2 identical machines:One machine for left parts and one for right parts.The machines can also be used individually.The machines were controlled via window manufacturing software, but can also be operated via the machine software.Both machines are equipped identically:- Left and right drilling units for front-end drilling.- 3 units for drilling and milling for longitudinal machining.- Parts are loaded once, and the unit carrier then moves for the various machining operations.Installation length per machine approx. 6 m.Individual sale possible:Price per machine 10,000 EuroSee the enclosed PDFs for more information.The data for this ad was created with ModulMWS - the software solution of Logo ...

Nombre de positions d’outil : 30 Puissance de la broche : 14 kW Vitesse de la broche : 14 000 [tr/min] Course de l’axe A : 360 [°] (+/-) Précision d’indexation : 0,001 [°] Course : -10 / +95 [°] Précision d’indexation : 0,001 [°] Type de changeur d’outils : Bras de chargeur Capacité de charge de la table : 350 [kg] Auction-ID: A7-32339-12

bore capacity in steel (diameter): 32 mmthroat: 232 mmbore stroke: 150 mmSpindle Speed: 115 - 2470 U/min.tool adaptor: MK 3 weight of the machine ca.: 280 kgdimensions of the machine ca.: 500 x 950 x 1800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 25 mmthroat: 210 mm: total power requirement: kWweight of the machine ca.: 0.085 trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel St 60: 30 mmbore capacity in cast iron GG 20: 30 mmDrilling capacity in St 60: 30 mmthreading in St 60: M 16 threading in GG 20: M 20 Short spindle: MK 3 spindle stroke: 140 mmthroat: 293 mmcolumn diameter: 115 mmMachine table - usable table surface: 514 x 360 mmT-Slots Amount - Width - Distance: 2 x 14 x 224 mmDistance spindle-table min.: 132 / 724 mmfeed: von Hand spindle turning speed - stepless: 100 - 1.800 U/mintotal power requirement: 1,0/1,6 kWweight of the machine ca.: 260 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 50.0 mmthroat: 360 mmbore stroke: 225 mmmorse taper: 4 MKtable:: 570 x 480 mmthreading: M 42 Stahlturning speeds: 50-316 / 316-2200 U/minfeed: 0.08 - 0.50 mm/Ucolumn diameter: 180 mmdistance spindle /table: max. 580 mmdistance spindle/base plate: max. 1185 mmtotal power requirement: 3.0 kWweight: 630 kgrange L-W-H: 1020 x 750 x 2340 mmScope of delivery- Keyed drill chuck 1 - 13 mm / B 16- Drill chuck arbor MK 4 / B 16- Reducing sleeve MK 4 / 3, MK 4 / 2, MK 3 / 1- Motorized table stroke- Coolant device- Touchscreen- Automatic tool ejector- Electromagnetic spindle feed- Thread cutting device- Initial filling with Shell Tellus 46- LED machine light- Digital speed display- Digital drilling depth display- Height-adjustable protective coverThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mmy-travel: 900 mmz-travel: 620 mmControl: Heidenhain TNC 640 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mMilling-turning machining centerThe machine is being sold in a defective condition.The rotary tilting table needs to be repaired.Spindle torque: 253NM / 12000min-1 / HSK 63Travel paths: 800/900/620mmControl: Heidenhein TNC 640Turning function: 4000Nm / 750rpm / diameter 800mm / max. 2000kgPallet changer: 6-pos, Pallet weight max 1 ton (pallet + workpiece)Tool changer: 60 places (expandable to 120 places)incl. spare spindleincl. palletsoptional: 4-jaw chuck SMW AutoblokOperating hours: 3469 h (Jan. 2025)X-axis travel:800 mmY-axis travel:900 mmZ-axis travel:620 mmX-axis rapid traverse:50 m/minY-axis rapid traverse:50 m/minZ-axis rapid traverse:50 m/minTorque:253 NmControl manufacturer:HeidenheinControl model:TNC 640Table load: ...

bore capacity in steel (diameter): 40 mmbore stroke: 190 mmturning speeds: 50-1800 U/minShort spindle: MK 4 Table dimensions: 500x400 mmtotal power requirement: 2,2 kWweight of the machine ca.: 330 kgdimensions of the machine ca.: 670 x 500 x 2120 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spindle Speed: 80-3200 U/min.: 30 mm: 25 mmtable surface area: 500x365 mmbore depth: 125 mmthroat: 260 mm: MK 3 distance spindle /table: 90-840 mmT-slot - width: 14 mmcolumn diameter: 110 mmweight of the machine ca.: 270 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 6 mmtotal power requirement: 1 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 50 mmbore capacity in cast iron: 56 mm: 50 mm: M 30 : M36 : MK 4 throat: 300 mm: 615x430 mm: 70-4000 U/min.: 2x14x224 mmDistance spindle/table max.: 147/688 mmcolumn diameter: 145 mmspindle stroke: 160 mmfeeds: 0,1-0,4 mm/Uheight of the machine: 1885 mmdrive motor: 1,8/2,9 kWweight of the machine ca.: 530 kgStandard equipment:- Electromagnetic feed clutch with overload protection and electricalCross Handle Switches- Control and light transformer- Main switch lockable- Mushroom pushbutton (latching) for EMERGENCY STOP in the front panel- Clockwise rotation by contactor control- Speed adjustment stepless- Speed display digital- Speed setting electrically- Protection IP 54- Motor insulation class F- Spindle protection with electrical protectionPos. 12LED machine lamp with radially adjustable light beam, supply voltage 24Volt, protection class IP 65Pos. 20.1Tapping device with foot switch, ...

bore capacity in steel (diameter): 40 mmthroat: 285 mmbore stroke: 160 mmSpindle Speed: 150-2.000 U/min.spindle taper: MK4 column diameter: 115 mmtotal power requirement: 1,5/2,2 kWweight of the machine ca.: 275 kgdimensions of the machine ca.: 1000x700x1900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 20 mmthroat: 250 mmbore stroke: 125 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1600 mmy-travel: 1250 mmz-travel: 1600 mmB-axis (table): 360.000 x 0,001° degmilling-head swivable +/-: (HV) 360.000° degpallet size:: 1000 x 800 mmtable load: 3000 kgtool taper: SK 50-B Plananlage 125spindle turning speed range: max. 8000 U/mintransmission ratio: 2 spindle drive: (100/40 % ED) 37/50 kWfeeds x/y/z -stepless: 30000 mm/minmax. torque on the spindle: 1410/2000 (100/40 % ED) Nmtotal power requirement: 100 kVAweight of the machine ca.: tdimensions of the machine ca.: 11555 x 7998 x 5050 mmUniversal machining center 5 axes simultaneouslyOriginal purchase price: EUR 1.295.000,-First machine installation in September 2011.A geometry measurement report (dated 30. August 2025) is available.Equipment:CNC-control Siemens 840D Solution LineSeparate handheld control unit, wired, Siemens HT-22-station pallet changer with safety light barrier 110-position tool changer (m ...

bore capacity in steel (diameter): 50.0 mmthroat: 300 mmbore stroke: 160 mmthreading: M 30 turning speeds: 100 - 1600 U/mintable:: 615 x 430 mmbore spindles - Morse Taper: 4 Kurzspindel MKcolumn diameter: 145 mmfeed: 0.1-0.2-0.3-0.4 mm/Udistance spindle /table: 147 / 688 mmengine output: 1.8 / 2.9 kWweight: 450 kgMachine height: 1865 mmFurnishing :- automatic feed with electromagn. Feed clutch- 4 feed rates 0.1-0.2-0.3-0.4 mm / rev- stepless speed adjustment- digital speed display- Feed overload protection- Spindle protection with electr. validation- digital speed display- machined base plate- Motor 1.8 / 2.9 KW - 100 - 1600 rpm.Special accessories included:- LED machine light pos. 12.- Thread cutting device pos. 20.0 (Thread cutting with stop)- Coolant device A pos. 24. (Coolant base plate, complete)- digital drilling depth display pos. 37.1 (5-digit LED display)The data for this ad  ...

bore capacity in steel (diameter): 55.0 mmthreading: M 30 / M 42 throat: 300 mmbore stroke: 140 mmturning speeds: 70 - 1200 U/mintable:: 615 x 430 mmbore spindles - Morse Taper: 4 Kurzspindel MKcolumn diameter: 145 mmfeed: 0.10 + 0.30 mm/Udistance spindle /table: 150 / 735 mmweight: 380 kgMachine height: 1850 mmFurnishing :- automatic feed- Feed device 0.1 + 0.3 mm / rev- stepless speed adjustment- digital speed display- Feed overload protection- Spindle protection with electr. validationincluding special equipment:- Coolant device mounted in the foot pos. 24.- Thread cutting device pos. 20.0 (Thread cutting with stop)- LED machine light pos. 12.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.