aléseuses et centres d'usinage machines d'occasion à vendre (3,278)

CNC CENTRE D’USINAGE VERTICAL Inv. n° 13.212M1 Make KEARNEY & TRECKER MILWAUKEE Modèle MODU-LINE Contrôle Siemens 840D Mach. Non. 27897 Taille de la table : 1,879 x 1,016 mm Déplacement en X (longitudinal) 1,830 mm Y-course (croix) 762 mm Déplacement en Z (vertical) 762 mm Poids de la pièce : 6,800 kg R.P.M. 4 – 2.400 HP 25 Volts 400 Cycles 50 Notamment : Changeur d’outils automatique Table rotative intégrée Ø 813 mm Auction-ID: A1-49027-59

: 16 mm: M 12 : MK 2 : 100-2.000 U/min.spindle stroke: 80 mmthroat: 190 mmcolumn diameter: 65 mm: 300x240 mm: 2 x 12 x 80 mm: 75/357 mm: 300x240 mm: 2 x 12 x 80 mm: 437/437 mmfeed: von Hand : Handkurbel Machine height: 825 mmtotal power requirement: 0,7 kWweight: 93 kgStandard equipment:5 TFT LCD display with touch function: Manual input of spindle speed setpoint, speed display actual value, integrated drilling depth display with touch function.setpoint, actual speed display, integrated drilling depth display with touchzero point transfer, virtual drilling depth scale in the display, machine statusstatus indicators and warnings on the display, Service information, Selectable operator languageoperator language: DE/EN/FR/ES/IT/NL/RU.- AC motor 230 Volt, 50 Hz- Connection plug ready fitted, cable length 3 m- Infinitely variable speed adjustment via potentiometer- Three separate buttons for  ...

: neu : ca. 2 Wochen ab Auftragse : 257.02 €: 80 mm: 28 mm: 120 mm: 12 kg[felix] 2.0 Easy and safe drilling operations - Thanks to the innovative machine vice by Felix Röwekamper.The machine vice for freely adjustable clamping of the workpiece.Simple, fast, secure and superior in use. With two hand movements the vice is clamped on the drilling machine table, precisely and safely adjusted.Prism jaws with shoulder and horizontal and vertical holding recesses to clamp a wide range of workpiecesHardened and precision ground clamping jawsNo additional clamping devices necessaryThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 20 bore stroke: 80 mmShort spindle: MK2 throat: 180 mmMachine table - usable table surface: 285x285 mmtable load: 45 kgspindle turning speed range: 210-2.500 UpMtotal power requirement: 0,38 kWOverall size: 620x470x1050 mmweight of the machine ca.: 80 kgStandard equipment:- Number of speed ranges 10 steps- Movable LED machine light- Swivel work table +/- 45 degrees- Mains cable and plug ready for immediate use- Drilling table adjustable via gear rack- Depth stop with scale- Emergency stop- In accordance with current CE conformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40 mmthreading in St 60: M24 threading in GG 20: M30 Short spindle: MK 3 Center of spindle to wall or column: 293 mmspindle turning speed - stepless: 160 - 2250 U/minColumn diameter: 115 mmspindle stroke: 120 mmMachine table - usable table surface: 514 x 360 mmT-Slots Amount - Width - Distance: 2 x 14 x 224 mmDistance spindle-table min.: 117/701 mmfeed: 0,10 + 0,20 mm/UMotor output: 1,45 / 1,9 kWheight of the machine: ca. 1840 mmweight of the machine ca.: 285 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 16960 €: 325.63 €: 40 mm: MK 4 : 360 mm: 61 - 1.169 (9) U/min: 2.2 kW: M33 : 550 mm: 950 mm: 2363 mm: 610 kg: 0,1 / 0,2 / 0,3 / 0,4 mm/U: 200 mm: 175 mm: 35 - 835 mm: 1240 mm: 550 x 550 mm: 950 x 550 mmERLO(MADE IN SPAIN)FOR MANUFACTURING USEautomatic feedgear drivefixed machine tabletiltable turntablefront wheel for sensitive fine feedcoolant equipmentlightingOPTION (PRICE ON REQUEST):Manual tapping system ALTERNATIVE:ERLO B-40 VERSION WITH ELECTROMAGNETIC CLUTCH PRICE ON REQUESTThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 32 mmbore stroke: 125 mmShort spindle: MK 3 throat: 210 mmMachine table - usable table surface: 390x390 mmtable load: 65 kgspindle turning speed range: 150-2.500 UpMPower requirement: 16 Atotal power requirement: 1,5 kWOverall size: 750x450x1745 mmweight of the machine ca.: 187 kgStandard equipment:- Stepless speed adjustment- Coolant device in the machine base- Movable LED machine light- Swivel work table with integrated machine vice on the opposite side opposite side with jaw width 120 mm- Mains cable and plug ready for immediate use- Drilling table adjustable via gear rack- Depth stop with scale- Emergency stop- According to current CE conformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 3984 : prompt, Zwischenverkauf v : Spanien : 10090 €: 193.73 €: 1 : 32 mm: MK 3 : 250 mm: 65 - 125 - 185 - 365 - 54 U/min: M24 : 665 mm: 640 mm: 2100 mm: 260 kg: Automatisch 0,10 - 0,20 - mm/U: 100 mm: 85 - 635 mm: 1.170 mm: 300 x 270 mm: 665 x 400 mm: 120 mmERLO (MADE IN SPAIN)FOR DEMANDING WORKSHOP USEgeardrive machine3 aut. feedsleft-right drillingtable with t-slotsdepth adustable endtool ejectordrill guardCE normsuser manual in GERMANIncl. following optional equipment:lighting equipmentcoolant equipment and machine base with T-slots(symbol photo)OPTION (PRICE ON REQUEST):reverse for tappingTime of delivery with options: approx. 8 weeksThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 34 mmthroat: 300 mmbore stroke: 150 mmbore capacity in cast iron (diameter): 40 mmthread capacity: M 27 spindle taper MT: 4 spindle speeds:: Stufenlos 100 - 2000 U/mincolumn diameter: 125 mmautomatic feeds: 3 / 0,1 - 0,2 - 1,3 table:: 400 x 420 mmDrive: Keilriemen total power requirement: 3 kWweight of the machine ca.: 360 kgdimensions of the machine ca.: 2,3 x 0,6x 1,1 m- Drilling machine of circular column feed automaticmechanical- Drive by electronic wide V-belt- Spindle taper: CM 4- Stepless speed adjustment with frequency converter- Potentiometer for speed adjustment- digital speed display- Automatic feed reversal when threading- Scale with adjustable drilling depth - automatic tool ejector- Push button for EMERGENCY STOP switch for right/left rotation- Electronic control integrated in the drill head - integrated coolant system- Machine light - hei ...

avec une base de table de forage réglable en hauteur Auction-ID: A1-49210-294

x-travel: 750 mmy-travel: 650 mmz-travel: 650 mmtotal power requirement: kWweight of the machine ca.: 12 trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: mmx-travel: mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mmy-travel: 450 mmz-travel: 450 mmtotal power requirement: kWweight of the machine ca.: 6.5 trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 30100 €: 574.91 €: 50 mm: MK 5 : 360 - 1.250 mm: 44 - 1.206 (12) U/min: Stahl/Guß: M40/M50 : 2060 mm: 995 mm: 2240 mm: 2300 kg: 441 - 1.345 mm: 0,06 - 0,2 (3) mm/min: 3.7 kW: 300 mm: 270 mm: 1.785 x 785 x 190 mm: 0,75 kW: 635 x 520 x 420 mm: 2645 mm: 0,75 kWleft/right rotationautomatic feeddrilling depth limitmanual headstock adjustment with hydraulic clampingelectric height adjustment of extension arm andhydraulic clampinghydraulicclamping of swivel movement of extension armcentral operation panel on the front sidepower load readout for drilling spindlehand wheel for spindle fine feedcoolant equipmentmachine lampbox tablemachine and equipment according to the CE-regulationsoperating manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 50,0 mmarm length: 320 - 1.220 mmworkpiece height max.: 330 - 1.170 mmturning speeds: 25 - 2000 U/minspindle taper MT: 5 MKbase plate: 1300 x 980 mmthreading: 42 Mquill stroke: 335 mmtotal power requirement: 4,0 kWweight of the machine ca.: 3000 kg.range L-W-H: 2035 x 1000 x 2830 mmFurnishing:- Large-sized base plate, ideal for processing large workpieces- Thick-walled, polished column for increased sliding properties of the boom- Extension arm and drill head with independent hydraulic clamping- Simple height adjustment of the extension arm using a lifting motor- Ideal for drilling, countersinking, reaming and thread cutting- Hardened and ground gears, running in an oil bath- Good gliding ability of the drill head on the boom- sanded surfaceScope of delivery:- Cube table- Drill chuck arbor MK 5 / B 16- Reducing sleeves MK 5/4, MK 4/3, MK3 / 2- LED machi ...

: throat: mmbore capacity in steel (diameter): 35 mmtool taper: MK4 0bore spindle turning speed range: 1400 U/minfeed range: 0.04-0.40 mm/mintotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Année de fabrication : 2020 ; Numéro de série : 4600016 ; Ce lot n’a pas été testé pour sa fonctionnalité. Des pièces peuvent être endommagées ou manquantes. Le vendeur ne présume aucune garantie de sécurité opérationnelle ; Auction-ID: A1-48334-91

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 1695 €: 12 mm: 19 mm Weldon : 0.45 kW: 316 mm: 235 mm: 328 mm: 115 kg: 12 mm: 36 mm: 50 mm: 70 mm: 260 U/min: 6 mmThe PRO-36 Battery is a drilling machine designed to drill holes of diameters up to 36 mm (1 7/16”) by using annular cutters.The machine can also drill holes of diameters up to 12 mm (0.47”) by using twist drill bits.Cordless drill is equipped with LED monitoring system that generates signals in green and red colours to indicate currentcondition of the drill and give safety information.Control panel is equipped with so called „vandal resistant” illuminated start/stop switches (green/red)Features and benefits:• LED Monitoring System indicates current condition of the drill and gives safety information• LED interface flashes green when inadequate adhesion is detected due to e.g. gap or thin work piece• dual bars guide  ...

x-travel: 1600 mmy-travel: 400 mmz-travel: 400 mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 30.0 mmthroat: 293 mmbore stroke: 140 mmmorse taper: 3 MKtable:: 515 x 360 mmturning speeds: 225 - 4300 U/mincolumn diameter: 115 mmdistance spindle /table: 132 / 724 mmengine output: 1.0 / 1.6 kWweight: 260 kgMachine height: 1790 mm NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU.Furnishing:- Infinitely variable speed setting by means of an adjusting lever- Spindle protection with electrical fuse- Three separate buttons for clockwise rotation - counterclockwise rotation - stop- Mushroom pushbutton (latching) for EMERGENCY STOP- Main switch, lockable- Rig ...

bore capacity in steel (diameter): 40.0 mmthroat: 293 mmbore stroke: 120 mmmorse taper: 3 MKtable:: 515 x 360 mmturning speeds: 160 - 2250 U/mincolumn diameter: 115 mmfeed: 0.10 + 0.20 mm/UT-slots: 2 x 14 x 224 mmdistance spindle /table: 117 / 701 mmengine output: 1.45 / 1.90 kWweight: 285 kgMachine height: 1840 mm NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU.Furnishing:- Infinitely variable speed setting by means of an adjusting lever- automatic spindle feed with feed overload protection- Spindle protection with electrical fuse- Three separate buttons for clockwise rotation - counterclo ...

table length: 3000 mmtable width: 3000 mmtable load: 25 ttotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 110 mmx-travel: 2500 mmy-travel: 1600 mmtotal power requirement: 30 kWweight of the machine ca.: 22 trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 36.0 mmbore capacity in cast iron: 45.0 mmthroat: 300 mmbore stroke: 160 mm: 4 speeds: 120-900 / 240 - 1780 U/mincolumn diameter: 145 mmtable-size: 615 x 460 mmfeed: 0.1 / 0.2 / 0.3 / 0.4 mm/Utotal power requirement: 1.75 / 2.5 kWweight: 440 kgdimensions: 1200 x 800 x 2300 mm well-maintained condition () current new price approx. 18.000 Euro special price on requestEquipment:- robust pillar drill (V-belt)- electromagnetic feed clutch = spindle feed with overload protection and electrical handle cross circuit- mushroom pushbutton (latching) for EMERGENCY STOP, in the front panel- electric stepless speed adjustment- Digital speed display- clockwise rotation of the drill spindle- pole-changing drive motor- Infinitely adjustable drilling depth stop- Work table with 2x T-slots - height-adjustable- Operating instructions in GermanThe data for this ad was crea ...

: gebraucht : 2021 : 3966 : prompt, Zwischenverkauf v : Taiwan : 15600 €: 1 : 12480 €: 42 mm: MK 4 : 280 - 1.100 mm: 44 - 1.500 (12) U/min: Stahl: M 25, Guss: M 38 : 1880 mm: 870 mm: 2210 mm: 1800 kg: 470 - 1.270 mm: 0,05 - 0,15 (3) mm/min: 2.2 kW: 260 mm: 280 mm: 1.725 x 715 x 180 mm: 0,75 kW: 635 x 520 x 415 mm: 2530 mmDEMO MACHINEleft/right rotationautomatic feeddrilling depth limitmanual headstock adjustment with mechanical clampingelectric height adjustment of extension arm and mechanical clampingmechanical clamping of swivel movement of extension armcentral operation panel on the front sidepower load readout for drilling spindlehand wheel for spindle fine feedcoolant equipmentmachine lampbox tablemachine and equipment according to the CE-regulationsoperating manual in GERMAN and ENGLISHBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum sec ...

x-travel: 730 mmy-travel: 730 mmz-travel: 880 mmtotal power requirement: 46 kWweight of the machine ca.: 15 trequired space: 5.5x3.0x2.8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1250 mmy-travel: 880 mmz-travel: 800 mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32.0 mmbore capacity in cast iron: 36.0 mmthroat: 280 mmbore stroke: 150 mmturning speeds: 80 - 1400 U/mintable-size: 400 x 550 mmmorse taper: MK 3 feed: 0.1-0.2-0.3 mm/Utotal power requirement: 1.1 / 2.0 kWweight of the machine ca.: 350 kgrange L-W-H: 800 x 600 x 1900 mmFurnishing :- Column drilling machine - Drive: V-belt- automatic spindle feed (0.1/0.2/0.3 mm/rev)- Pole-changing drive motor- Work table with T-slots- Height adjustable via hand crank- machined base plate with T-slots- adjustable drilling depth stop- Connection cable + 16A plug Machine link:https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machinen o=1008-9103736The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 50 mmthroat: 355 mmbore stroke: 280 mmspindle taper: MK 5 spindle head adjustment: vertikal 280 mm motorischfeed: 0,11-1,73/9step mm/minturning speeds: 32-1400/12step U/mintable-size: 770 x 640 mmsurface area: 630 x 500 mmbase plate: 490 x 530 mmtable travel: total power requirement: 8,1 kWweight of the machine ca.: 1,7 tdimensions of the machine ca.: 1,25 x 0,8 x 2,75 mDrilling capacity in steel: 50 mmThroat depth: 355 mmSpindle stroke: 280 mmSpindle taper: Morse taper MT 5Vertical head adjustment: 280 mm (motorized)Feed rates: 0.11 – 1.73 mm/rev (9 steps)Spindle speeds: 32 – 1,400 rpm (12 steps)Table size: 770 × 640 mmClamping surface: 630 × 500 mmBase plate: 490 × 530 mmMovable table: YesTotal power requirement: 8.1 kWMachine weight: approx. 1.7 tSpace requirement (L × W × H): approx. 1.25 × 0.8 × 2.75 mAdditional InformationDistance from ...

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 4758.02 €: 18 mm: MK 2 : 240 mm: 30 - 3000 U/min: M12 : 355 mm: 705 mm: 1065 mm: 170 kg: 100 mm: 155 - 415 mm: 155 - 550 mm: 340 x 280 mm: 82 mmContinuous/normal drilling performance 18/20 (in E335/ST60), 12 NmManual feedDigital speed and drilling depth displayThread cutting systemControl panel with OLED displayRobust, high quality drill head hood with ergonomically inclined frontLED lightingQuickly adjustable and ergonomic drill depth stopStepless speed control via central rotary knobEMERGENCY STOP pushbuttonThermal overload protectionSpindle stopDrill protection with electr. FuseConnection cable with Schuko plug3 years warranty for single shift operationOPTIONS:Machine cabinet with door and drawerCoolant deviceLED lighting with pivot armDrill package 3 (vice &, keyless chuck)The data for this ad was created with ModulMWS - the soft ...