aléseuses et centres d'usinage machines d'occasion à vendre (3,233)

Boring power:10 mmweight:590 kgconnected load:2 kWdimensions::1500 x 1300 x 2300 mm

bore capacity in steel (diameter):45 mmWORKING RANGE -BORING-:. - drilling capacity full bore (steel):45 mm - drilling capacity full bore (cast iron):55 mm - horizontal travel:1050 mm - vertical travel:450 mm - sleeve stroke:200 mmWORKING SPINDLE / HEAD:. - spindle revolutions (min):15 /min - spindle revolutions (max):2800 /min - number of gears:2 - taper fixture : MK 4 :. - spindle power (continuous):5.5 kW - torque (max.):250 Nm - max. distance spindle ... clamping surface:710 mm - thread cutting attachment : yes :. TABLE:. - clamping surface (left-right):1200 mm - clamping surface (front-back):750 mmELECTRICAL SPECIFICATIONS:. - total power consumption:7 kW - mains power supply:9.3 kVA - mains voltage:400 V - mains frequency:50 HzDIMENSIONS / WEIGHTS:. - space requirements length:3000 mm - space requirements width:3000 mm - total height:3000 mm - total we ...

bore capacity in steel (diameter):10 mmthroat:210 mmbore stroke:100 mmtotal power requirement:0,7 kWweight of the machine ca.:302 kgdimensions of the machine ca.: 620 x 800 x 1950 mmTable dimensions:350 x 250 mmspindle speeds::250, 355, 710, 1000, 1400, 2000, 2500 U/min

bore capacity in steel (diameter):10 mmthroat:210 mmbore stroke:80 mmtotal power requirement:1,1 kWweight of the machine ca.:195 kgdimensions of the machine ca.:530 x 650 x 1850 mmspindle speeds::355, 710, 1400, 2800 U/minTable dimensions:340 x 280 mm

bore capacity in steel (diameter):50 mmtotal power requirement:7,8 kWweight of the machine ca.:1720 kgdimensions of the machine ca.:1200 x 770 x 2700 mmnumber of spindle speeds:45 - 1000 mmsurface area:630 x 500 mm

x-travel:1000 mmy-travel:800 mmz-travel:800 mmweight of the machine ca.:24000 tdimensions of the machine ca.:ca. 7,8 x 6,1 x 3,4 m m

bore capacity in steel (diameter):50 mmtotal power requirement:7,8 kWweight of the machine ca.:1720 kgdimensions of the machine ca.:1200 x 770 x 2700 mmnumber of spindle speeds:45 - 1000 mmsurface area:630 x 500 mm

throat:640 mmtotal power requirement:1,6 kWweight of the machine ca.:450 kgdimensions of the machine ca.:1000 x 600 x 2100 mtable-size:455 x 380 mmchuck::MK 3 working area:355 x 280 mm

drill diameter:5,,,,40 mmdrilling length:600 mmlip angle:90-150 °total power requirement:4,5 kWweight of the machine ca.:0,8 tdimensions of the machine ca.:2-2-2 mCNC programmable according to ISOPoint angle 90-140 degrees, disc stroke x 80mm y 80mmgrinding wheel 6mm to 150mm ceramic or CBN speed 2500 to 6000 rpmGrinding options - 3 facets 6 surface grinding (Renault patent) - conical surface grinding with cross-section correction / point thinning / cross point. / Type 2/1Avyac grind / 4 faces gr. Cross for deep drill

Auction-ID: A1-46783-17

Auction-ID: A1-46783-197

Avec une table mesurant 81 x 81 x 60 cm Auction-ID: A1-46783-169

Auction-ID: A1-46783-15

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 4758.02 €: 18 mm: MK 2 : 240 mm: 30 - 3000 U/min: M12 : 355 mm: 705 mm: 1065 mm: 170 kg: 100 mm: 155 - 415 mm: 155 - 550 mm: 340 x 280 mm: 82 mmContinuous/normal drilling performance 18/20 (in E335/ST60), 12 NmManual feedDigital speed and drilling depth displayThread cutting systemControl panel with OLED displayRobust, high quality drill head hood with ergonomically inclined frontLED lightingQuickly adjustable and ergonomic drill depth stopStepless speed control via central rotary knobEMERGENCY STOP pushbuttonThermal overload protectionSpindle stopDrill protection with electr. FuseConnection cable with Schuko plug3 years warranty for single shift operationOPTIONS:Machine cabinet with door and drawerCoolant deviceLED lighting with pivot armDrill package 3 (vice &, keyless chuck)The data for this ad was created with ModulMWS - the soft ...

: neu : 2025 : 030161 : prompt, Zwischenverkauf v : Deutschland : 7350.17 €: 141.86 €: 1 : 23 mm: MK 2 : 260 mm: 20 - 2000 U/min: 1.5 kW: M16x1 : 430 mm: 715 mm: 1800 mm: 290 kg: manuell mm/U: 110 mm: 230 - 850 mm: 420 x 340 mm: 100 mmDrilling capacity / normal drilling capacity 23/25 (in E335/ST60)Manual feedMain switchTapping attachementControl panel with OLED displayRobust, high quality drill head hood with ergonomically inclined frontLED lightingQuickly adjustable and ergonomic drill depth stopStepless speed control via central rotary knobEMERGENCY STOP pushbuttonThermal overload protectionSpindle stopDrill protection with electr. FuseConnection cable with CEE plugOPTIONS:Drill package 3 (vice &, keyless chuck)Coolant deviceLED lighting with pivot armThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Opération inconnue / pièces manquantes Auction-ID: A1-46783-10

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 8144.6 €: 157.19 €: 25 mm: MK 3 : 280 mm: 125 - 4000 (2 Stufen) U/min: 0,9 / 1,45 kW: M20 : 520 mm: 820 mm: 1900 mm: 275 kg: 125 mm: 110 mm: 240 - 790 mm: 420 x 340 mm: 125 mmDrilling capacity / normal drilling performance 25/30 (in E335/ST60)Drilling depth adjustment with fine adjustmentDigital drilling depth and speed displayEmergency stop pushbuttonUndervoltage releaseelectr. Drilling machine guardManual reversing switch for clockwise and anticlockwise rotationConnection cable (1.5 m) with CEE plugThermal overload protectionOPTIONS:Drill package (vice &, keyless chuck)Coolant deviceLED lighting with pivot armThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-46783-59

Perceuse à colonne d’établi Continental CH-16N. Machine équipée d’un mandrin à clé et d’une transmission par courroies avec 12 vitesses de broche. Capacité de perçage maximale 16 mm. Année de fabrication 1989. État d’usage avec traces normales d’usure et d’oxydation. Vendue telle que visible sur les photos. Auction-ID: A3-43553-38118

Monté sur une table avec des roues Auction-ID: A1-46783-141

Auction-ID: A1-46783-72

Auction-ID: A1-46783-206

: neu : ca. 8 Wochen ab Auftragse : Spanien : 10930 €: 209.86 €: 35 mm: MK 4 : 300 mm: 132-194-277-319-466-666-8 U/min: 1.5 kW: M27 : 755 mm: 480 mm: 2205 mm: 385 kg: 125 mm: 90 - 890 mm: 1250 mm: 400 x 420 mm: 150 mmManual feedGeared driveHardened and ground high quality steel gearsSpeed plate and selecting levers on head frontDepth scale and adjustable depth stopThermomagnetic switchEmergency STOP push buttonSpindle reversing switchWorklightFixed tableSafety drill guard with microswitchCE markOPTIONS (PRICES ON REQUEST): Electronic speed variator with speed digial reader (VE+TAK) A) 66-211 B) 97-310 C) 138-443 D) 160-510 E) 233-746F) 333-1066 G) 440-1413 H) 648-2074 I) 926-2963 Depth digital reader(LBC) Manual tapping system (IR/RS) Manual tapping system for models with variator(IR/RS-VE) Rotating and tilting table(MGI) Coolant equipment with T-slots in the base plate (ERB)ERLO BX- ...

Auction-ID: A1-46783-1022

Opération inconnue Auction-ID: A1-46783-19

: neu : ca. 8 Wochen ab Auftragse : Spanien : 16960 €: 325.63 €: 40 mm: MK 4 : 360 mm: 61 - 1.169 (9) U/min: 2.2 kW: M33 : 550 mm: 950 mm: 2363 mm: 610 kg: 0,1 / 0,2 / 0,3 / 0,4 mm/U: 200 mm: 175 mm: 35 - 835 mm: 1240 mm: 550 x 550 mm: 950 x 550 mmERLO(MADE IN SPAIN)FOR MANUFACTURING USEautomatic feedgear drivefixed machine tabletiltable turntablefront wheel for sensitive fine feedcoolant equipmentlightingOPTION (PRICE ON REQUEST):Manual tapping system ALTERNATIVE:ERLO B-40 VERSION WITH ELECTROMAGNETIC CLUTCH PRICE ON REQUESTThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine de perceuse à colonnes avec entraînement par courroie en V Auction-ID: A1-47566-12

Opération inconnue Auction-ID: A1-46783-12

Auction-ID: A1-46783-163

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 1695 €: 12 mm: 19 mm Weldon : 0.45 kW: 316 mm: 235 mm: 328 mm: 115 kg: 12 mm: 36 mm: 50 mm: 70 mm: 260 U/min: 6 mmThe PRO-36 Battery is a drilling machine designed to drill holes of diameters up to 36 mm (1 7/16”) by using annular cutters.The machine can also drill holes of diameters up to 12 mm (0.47”) by using twist drill bits.Cordless drill is equipped with LED monitoring system that generates signals in green and red colours to indicate currentcondition of the drill and give safety information.Control panel is equipped with so called „vandal resistant” illuminated start/stop switches (green/red)Features and benefits:• LED Monitoring System indicates current condition of the drill and gives safety information• LED interface flashes green when inadequate adhesion is detected due to e.g. gap or thin work piece• dual bars guide  ...