aléseuses et centres d'usinage machines d'occasion à vendre (3,232)

A Fadal CNC 4-axis machining center is available. Tool positions: 21, spindle taper: CAT40, motor power: 11kW, speed: 7500rpm, travel X/Y/Z: 762mm/406mm/508mm, table dimensions X/Y: 990mm/406mm, max. table load: 900kg, rapid traverse: 15m/min, feed rate: 6m/min, positioning accuracy: +/-0.005mm, repeatability: +/-0.0025mm. Machine dimensions X/Y/Z: approx. 2500mm/2300mm/2600mm, weight: approx. 3500kg, control: Fadal CNC 88HS. Only plastic parts were manufactured with the machine. Documentation available. An on-site inspection is possible.

Speed: from 250 to 2000 rpmTable dimensions: 460 x 360 mmwith two groovesReference: Pieper - Lot 62

Table dimensions: 200 x 200 mmReference: Hüpometall - Lot 20

Pneumatic Tapping Machine Version with an adjustable angle, horizontal tapping possible Tapping machines for M3 - M12 threads, angle adjustable. 6 quick-change chuck with slipper clutch. Thread diameter M3 - M12 metric Speed infinitely variable 400 rpm. Working pressure 6 - 8 bar Working range max. 1100 mm Weight 20 kg suitable clamping table Lot 224, 254 or 265. Condition: never used / new (5)

Serial number: EB035487Nominal speed: 2400 rpmwith a swivelling work tableTable dimensions: approx. 170 x 170 mmSpeed range: 280 - 2350 rpmReference: Hansmann - Lot 12

Demonstration machine! Pneumatically driven tapping machine for M3 - M12 threads with: - Stable and flexible working arm. - 6 quick-change chuck with slipper clutch. Documentation in English Thread diameter M3 - M12 mm Speed infinitely variable 400 rpm. Torque 25 Nm Air pressure 6 - 8 bar Working range radius 1000 mm Machine weight approx. 12 kg suitable clamping table Lot 224, 254 or 265.

with swivelling work tableTable dimensions: approx. 200 x 195 mmSpeed range: 220 - 2450 rpmNominal speed: 1400 rpmincl. a small machine viceJaw width: approx. 65 mmReference: Hansmann - Lot 10

Technical data Manufacturer: ALZMETALL Werkzeugmaschinen und Gießerei Friedrich GmbH & Co. KG Model: AB 50/SV Machine number: 58794 Year of manufacture: 2018 Operating voltage: 3 x 400 V Frequency: 50 Hz Backing Fuse: 20 A Total rated current: 10.8 A Speed range: 50 - 1280 rpm⁻¹ Weight: 605 kg Configuration Column Heavy Duty Drilling Machine Digital display for speed LED work lighting Cross table mounted Machine vise mounted Footswitch available Operating instructions available Used condition with usual signs of wear

Series No.: 803852, speed max. 2,500 / 3,000 rpm, spindle stroke max. 80 mm

Machine reamers, reamer, reaming tool, locating knife cutting set -Manufacturer: Loewe / FW, Adjustable machine reamers, 11 pieces -Diameter: Ø 35 to 65 mm -Recording: MK3/MK4 -Submission/Price: complete -Transport dimensions: 520/400/H80 mm -Weight: 27 kg

Spindle speed: from 220 to 4500 rpmDrilling depth up to 100 mmTable dimensions: 280 x 220 mmThis is an article from a training workshopReference: Training workshop - Lot 1

Table dimensions: approx. 300 x 250 mm, drilling capacity steel: 15 mm, continuous drilling capacity: 13 mm, spindle stroke: 60 mm, projection: 220 mm, speed range: 40 - 4000 rpm, column diameter: approx. 70 mm

equipped with automatic cooling system; unused; in suitcase; 5637

Technical data Manufacturer: IXION Type: BST-13 4-fold in-line drilling machine / multiple drilling machine Drilling capacity: 13 mm 4 speed levels Speed range: 475 - 2400 rpm Drilling depth approx. 90 mm Table size approx. 1270 x 290 mm Electrical connection: 380 V Motor power per unit: 0.4 kW Machine dimensions approx. 1270 x 750 x 1400 mm Configuration 4 individual drilling spindles Common work table Belt drive with step pulleys Drill chuck mounted Emergency stop available Suitable for series and row drilling

equipped with automatic cooling system; unused; in suitcase; 5637

Throat depth: 180 mm

Technical data WEBO Column Drill / Stand Drill Type B16 Drilling capacity: 16 mm 26 speed levels Speed range: 245 - 4000 rpm Drilling depth: approx. 160 mm Table size approx. 600 x 500 mm Configuration With height-adjustable drill table Coolant equipment available Speed table and depth scale available Drill chuck mounted Heavy casting design Used condition

Table dimensions: approx. 510 x 300 mm, workbench contents may vary

Serial number: 55194Operating voltage: 400 VConnection: 650 WDrilling capacity: 16 mmSpindle stroke: 80 mmSpeed: from 120 - 2580 rpmTable dimensions: 230 x 230 mmReference: Schönichen - Lot 29

Standard holders and accessories, attachment holders, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex holders, tool holders, drill bit mounts, twist drills -Manufacturer: Sassex, drill bit with drill blade Ø 60.5 mm -Reamer: Type H3 52.1-65 -Recording: MK4 -Dimensions: Ø 60 x 425 mm -Weight: 2.3 kg

Standard holders and accessories, attachment holders, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex holders, tool holders, drill bit mounts, twist drills -Manufacturer: Sassex, drill bit with drill blade Ø 55.2 mm -Reamer: Type H3 52.1-65 -Recording: MK5 -Dimensions: Ø 55 x 315 mm -Weight: 2.3 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve -Morse taper sleeve: Extension sleeve MK5 -Dimensions: Ø 52/340 mm -Weight: 2.8 kg

bore capacity in steel (diameter):55 mmarm length:1600 mmtotal power requirement:4 kWweight of the machine ca.:5,5 tdimensions of the machine ca.:2800 x 980 x 3000 mm

arm length:1600 mmweight of the machine ca.:5,5 tdimensions of the machine ca.:2800 x 980 x 3000 mm

Offre 26159 Données techniques : - Capacité de forage en acier ST 60 32 mm - Capacité de forage en acier ST 60 45 mm - Dispositif d’écoute - Porte-broche de perçage MK 4 - Course de la broche de perçage 160 mm - Projection : 300 mm - Table avec 2 fentes en T 500 x 370 mm - Table de distance maximale – broche de perçage 706 mm - Distance maximale entre la plaque de base et la broche de forage 1166 mm - Diamètre de la colonne : 145 mm - Alimente 0,1 - 0,2 - 0,3 mm/tr - Vitesses de broche de forage ajustables à l’infini - Niveau 1 55 - 200 tr/min - 110 - 400 tr/min - Niveau 2 200 - 725 tr/min - 400 - 1450 tr/min - Transmission 400 V / 1,4 / 2,2 kW - Espace nécessaire environ. F 650 x H 2000 x D 1150 mm - Poids environ. 350 kg - Dispositif de liquide de refroidissement - E. pédalier - Mandri ...

Contrôleur CNC : Siemens 840D 3D-Control Axes Course à l’axe X mm : 600 Déplacement de l’axe Y mm : 500 Course de l’axe Z mm : 500 Degrés de l’axe C : 360º (0,001) Degrés de l’axe B : -5 / +110º Distance du nez de la broche - surface de la table mm : 600 Taux d’alimentation m/min : 80 Traversée rapide m/min : 80 Accélération dans les axes m/s2 : 10 Table de travail Nombre de palettes : 2 Dimensions de la table mm : 500x500 Taille maximale de la pièce (P x H) mm : 500x525 Poids maximal de la pièce kg : 240 Broche Vitesse de la broche : 18000 Puissance de l’entraînement de la broche : 35/25 (40 % DE/continuation) Couple de la broche Nm : 130/87 (40/100 % ED) Refroidissement Refroidissement via la barre centrale de la broche : 40 Capacité du réservoir : 980 Système d’outils Porte-outil : HSK-A 63 Emplacements pour magazines  ...

x-travel: 1100 mmy-travel: 610 mmz-travel: 610 mmControl: Heidenhain iTNC 530 total power requirement: kWweight of the machine ca.: 9 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-course : 600 mmy-course : 700 mmz - course : 600 mmContrôle : Heidenhain Millplus consommation totale de puissance : kWweight de la machine environ : 9 tdimensions de la machine vers : mLes données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.

Un centre d’usinage multi-axes Fischer CNC 5 axes est disponible. Puissance de la broche : 7,5 kW, vitesse de la broche : 18000 tr/min, positions de l’outil : 12, éléments de serrage : 8, longueur de travail : 7000 mm, course de serrage : 60 mm, plage de serrage : 380 mm, max. inclinaison de la broche : 90, course d’arrêt : 60 mm, largeur d’arrêt : environ 250 mm, porte-outil : HSK-40E, diamètre maximal de la lame de scie : 200 mm, dimensions de la machine X/Y/Z : environ 8200 mm/2450 mm/3200 mm. Documentation disponible. Une inspection sur site est possible.