autres machines à bois machines d'occasion à vendre (1,357)

Manufacturer: Homag, Type: KL 10/21/QA, Year: 1999, Program: Homatic, Control: PC 21, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 50, Min.-max. workpiece length in mm: 150-3500, Min.-max. workpiece height in mm: 10-60, Edgeband height max mm: 65, Min-max feed m/min: 10-30, Axis control: yes, Infeed table: no, Einlauflineal gesteuert: yes, Premilling: yes, Application of separation agent: yes, IR zone: yes, Strip magazin: no, Mitre stations: yes, Pre-milling: yes, Radius milling axis adjustment: yes, Corner tracing type: FK 13, 2 Motoren: 2, Magazin : 2 X 12, with tool holders: HSK, Grooves, slewable-controlled: Freiplatz, Radius scraper: yes, Scraper with axis adjustment: yes, Flat scraper: yes, Corner trace buffing: no, Corner trace buffing: no, Bonding part EVA: 2 Stück, Number of tools per tool-magazine: 2 X 8, Buffing unit: yes, Roller/belt: Riemen, Freiplätze: ...

Manufacturer: Homag, Type: KFR 21 und KFL 21 inkl.Winkelübergabe, Year: 1999, Control: 2 X NC 21, Program: Homatic, System comprising of: 2 Kantenmaschine mit Winklelübergabe, Kantenmaschine mit Doppelenprofiler Teil: 2 Zerspaner + Fügen, getrennte Kette: yes, Laserverleimteil: no, Kantenstärke min-max mm: 0,5-3, Work piece width min-max mm: 45, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-45, Strips min/max mm: no, Machine no 1: KFR 21, MA 1 Arbeitsbreite min-max: 250-2800 mm, MA 1 Kantenmaterialstärke min-max mm: 0,5-3,0, Ma 1 Fügefräsen: yes, Ma 1 Schutzfräsen: yes, MA 1 Feinfräsen: yes, MA 1 Nuten: yes, MA 1 Verleimteil gerade: yes, MA 1 Vorfräsen: yes, MA 1 Radiusfräsen 1: yes, MA 1 Radiusziehklinge: yes, MA 1 Flachziehklinge: yes, MA 1 Schwabbeln: yes, MA 1 Nuten: yes, Angular transfer: yes, Machine 2: KFL, MA 2 Kantenstärke 0,5-3 mm: yes, ...

Manufacturer: Homag PU und EVA, Type: KAL 310 310/6/A3/S2, Year: 2008, Control: NC 22, Software: Homag, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 65, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 12-60, Min-max feed m/min: 10-25, Premilling: yes, Fine milling: yes, Application of separation agent: yes, IR zone: yes, Coil magazine: 2-fach, Mitre stations: HL 81, Bevel milling: yes, Corner tracing type: FF 12, 4 motors: Ja, Radius scraper: yes, Type of scraper: PN 10, Flat scraper: FA 11, 4 motors: Ja, Ersatzverleimteil : PU, Bonding part EVA: EVA, Buffing unit: yes, Separation agent setup: yes, Year :2008

Manufacturer: Homag mit Doppelenprofilerformatteil, Type: KFL 23/03/27/PU/30+ZHR 05, Year: 2000, Program: NC 21, Control: Homatig, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 250-2600, Min.-max. workpiece length in mm: 150-1300, Min.-max. workpiece height in mm: 10-55, Edgeband height max mm: 60, Min-max feed m/min: 30, Finished product: Fronten Küche, Axis control: yes, Infeed table: yes, Einlauflineal gesteuert: yes, Premilling: Schutzfräsen/zerspanen/zerspanen, IR zone: yes, Coil magazine: 2 X 24 fach, Strip magazin: no, Min.-max. batten magazine mm: no, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Radius milling axis adjustment: yes, 2 motors: FK 13/6 fach, Grooves, slewable-controlled: 2, Radius scraper: yes, Type of scraper: yes, Scraper with axis adjustment: yes, Cleaning nozzles: yes, Bonding part EVA: PU Verleimteil, Number of tools per tool-m ...

Manufacturer: IMA, Type: Compact/U/812/F, Year: 1996, Program: IMA, Kantenmaterial : 0,4-12, Work piece width min-max mm: 70, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 8-50, Edgeband height max mm: 50, Thickness of coiled edgeband max mm: 3, Vorschub min- max m/min: 15-25, Vorwärmeinheit IR: yes, Premilling: yes, Panel length min mm: 200, Leistenmagazin min-max mm: yes, Coil magazine: yes, Strip magazin: yes, Premilling: yes, Mitre stations: yes, Mitre stations: yes, Radiusfräsen : yes, Contour milling type: yes, Eckenkopierfräs Motore: 4 Motore, Nutfräsen: yes, Number of sanding units: 3, Kantenschleifen: 1, Profilschleifen oben unten: yes, Radius scraper: yes, Flat scraper: yes, Top pressure belt/roller: Rolle, Year :1996

Manufacturer: Cefla, Type: Easy 2000, Year: 2006, Work piece width min-max mm: 10-1300, Work piece hight min-max mm: 10-60, Work piece length min-max mm: 100-3000, Overall length metre: ca.25, Feeding speed m/min: 3-5, Water-based paint line: yes, Inlet conveyor: yes, wast cleaning: yes, work piece detection: yes, Conveyour system: Band, Spraying stations: 2, Fast exchange system spray gun carrier: yes, Laquer circles: 4, Laquer system - airless: yes, Laquer system - airmix: yes, Laquer recharging: yes, by rollers: yes, by scraper: yes, Water cleaning: yes, Circulating-air drier mm length in mm: ca.12000, machine ready for demonstration: yes, FREE TEXT: inkl 2 Lampen UV 120 Watt Trockner/12 Kremlin Pumpen /Pistolenwaschgerät und walzmaschine Sorbini Smartcoater, Year :2006

Manufacturer: HOMAG Maschinenstrasse, Type: Kf 62, Year: 1992, Work piece width min-max mm: Maschine 1 1200 mm Maschine 2 2600 mm, Min.-max. workpiece length in mm: 250-2600, Min.-max. workpiece height in mm: 10-50, Edge band thickness min/max mm: 0,5-3,0, Soft edge single side: no, MA 1 min - max working width: 250-1200, MA 1 chipper: yes, MA 1 fine milling: yes, MA 1 grooving: no, MA 1 glueing part Soft: no, MA 1 rough milling: yes, MA 1 radius milling 1: yes, MA 1 grooving: no, Min - max working width MA 2: 250-2600, MA 2 min - max edge material thickness mm: 0,5-3,0, MA 2 edge thickness 0.5-3 mm: yes, MA 2 chipper: yes, MA 2 fine milling: yes, MA 2 glueing part straight: yes, MA 2 trimming: yes, MA 2 Andruckzone : yes, Coil magazine: 2-fach, Feeding: no, Angular transfer: yes, Feeding speed max m/min: 10-50, Compressed air bar: 6, Premilling: yes, Flush/radius/chamfer milling: yes 2  ...

Manufacturer: IMA , Type: Advantage 5620, Year: 2001, Program: IMA, Control: IMA, Min-max edge material mm: 0,5-3, Work piece width min-max mm: 70-1300, Min.-max. workpiece length in mm: 150-3000, Min.-max. workpiece height in mm: 10-50, Edgeband height max mm: 45, Min-max feed m/min: ca. 20, Premilling: yes, IR zone: yes, Lasertechnik: yes, Kw-Leistung Laser: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Corner tracing type: yes, Grooves, slewable-controlled: yes, Type of scraper: yes, Cleaning nozzles: yes, Edge sanding: yes, Profile sanding top bottom: Rolle, Roller/belt: 6, Year :2001

Manufacturer: Homag, Type: KL 79, Control: Homatic, Min-max edge material mm: 3-20, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 10-60, Edgeband height max mm: 65, Min-max feed m/min: 10-25, Premilling: no, Fine milling: yes, Application of separation agent: no, IR zone: no, Strip magazin: Leistenmagazin, Min.-max. batten magazine mm: 3-20, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Corner tracing type: no, Bonding part EVA: yes, Pre-smelting Kg/Hr: yes, Number of sanding units: 2, Profile sanding top bottom: yes, Top pressure belt/roller: Riemen, Edge sanding straight: yes,

Manufacturer: Homag, Type: KFL 10/42/QE/S, Year: 2002, Program: yes, Control: Homatic NC 21/ES00, Work piece width min-max mm: 280-600, Min.-max. workpiece length in mm: 320-2500, Min.-max. workpiece height in mm: 8-60, Edgeband height max mm: 30-50, Kantenmaterial min-max mm: 0,3, Vorschub min- max m/min: 10-40, Finished product: Spanplatten aufdoppeln bekanten, Softforming: yes, Einlauflineal gesteuert: yes, Premilling: yes, Profile milling: yes, Trennmittelauftrag: yes, IR zone: yes, Coil magazine: 2-fach, Premilling: yes, Mitre stations: yes, Vorfräsen: yes, Fasefräsen: yes, Radiusfräsen Achsverstellung: yes, Oszilierend: yes, Reinigungsdüsen: yes, Ersatzverleimteil : yes, Verleimteil EVA: yes, Düse: yes, Year :2002

Manufacturer: Homag KAL 310/9/A20/S2, Type: 310/9/A20/S2, Year: 2005, Control: Powercontrol, Barcode: möglich, Min-max edge material mm: 0,3-3,0, Work piece width min-max mm: 75, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 10-60, Min-max feed m/min: 15-30, Axis control: yes, Infeed table: Winkelanschlag, Einlauflineal gesteuert: yes, Premilling: yes, Fine milling: yes, Application of separation agent: yes, IR zone: yes, Power per lamp: 400, Coil magazine: yes, Strip magazin: no, Mitre stations: yes, Radius milling axis adjustment: yes, 2 motors: FK 13, Magazin : 2 X 6 fach, Radius scraper: yes, Type of scraper: servo gesteuert, Scraper with axis adjustment: yes, Spraying system 2: yes, Bonding part EVA: PU Verleimteil, Buffing unit: yes, Barcode: möglich, Workpiece support: yes, Hover cussion table: yes, Return type: TFU 140/L/20/08/105 Bauyeshr 2018, FREE  ...

Manufacturer: OTT, Type: M259, Year: 1994, Program: Ott, Min-max edge material mm: 0,5-3, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 150-3000, Min.-max. workpiece height in mm: 10-60, Edgeband height max mm: 50, Min-max feed m/min: 8-24, Coil magazine: yes, Strip magazin: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes steuerbar, radius milling: yes steuerbar, 4 motors: yes, Grooves, slewable-controlled: yes, Radius scraper: yes, 4 motors: yes, Bonding part EVA: yes, Buffing unit: yes, Top pressure belt/roller: Rolle, Compressed air bar: 6, Noise enclosure: yes, Year :1994

Manufacturer: Homag, Type: KL 10/18/QA, Year: 2000, Program: Homatic, Control: NC 21, Min.-max. workpiece height in mm: 85 - 1200, Edgeband height max mm: 240, Min-max feed m/min: 8 - 60, Axis control: 0,3 - 3,0 , Einlauflineal gesteuert: 10 - 40, Application of separation agent: 0,4 - 12, Power per lamp: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Pre-milling: Granulat, Strip magazin: yes, Magazin : yes, Grooves, slewable-controlled: FK 13, Nuten : UF 11, Radius scraper: yes, Type of scraper: 8, Scraper with axis adjustment: yes, Flat scraper: 2, Type of scraper 2: yes, Corner trace buffing: 2 X Fase, 4 motors: yes, Corner trace buffing: yes, Servo-Kopieren: yes, Rollende-Kette: Band, Ersatzverleimteil : Riemen, Bonding part EVA: 6, Nozzle: 11.000, Pre-smelting Kg/Hr: yes, Year :2000

Manufacturer: IMA, Type: Compact PC/KIF 7220, Year: 1997, Programm: yes, Achsensteuerung: yes, Edgeband thickness max mm: 3, Edgeband height max mm: 50, Thickness of coiled edgeband max mm: 3, Panel length min mm: 250, Coil magazine: yes, Strip magazin: yes, Premilling: yes, Power per lamp: yes, Glue system granulate/cartridge: Granulat, Mitre stations: yes, Trimming saw: yes, Flush/radius/chamfer milling: yes, Contour milling: yes, Number of tools per tool-magazine: no, Radius scraper: yes, Flat scraper: yes, Buffing unit: yes, Moulding units swivel-mounted: yes, Schwenkbereich Grad: 45-90, Top pressure belt/roller: Rolle, Feeding speed max m/min: 10-20, Compressed air bar: 6, Year :1997

Manufacturer: Brandt KDF mit Fügefräsen, Type: Profiline KDF 670, Year: 2005, Barcode: 0,5-3, Min-max edge material mm: 120-3500, Work piece width min-max mm: 10-55, Min.-max. workpiece length in mm: 10-60, Edgeband height max mm: 20, Luftkissentische Einlauf: Umstellung von 2mm auf Fase automatisch, mit Vakuum: yes, mit Klemmung: yes, Machining cracks: yes, Fine milling: yes, Application of separation agent: yes, PU-EVA: yes, Laser technology: yes, kW Leistung Laser: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Bevel milling: yes, with tool holders: yes, Nut Motore: yes, Type of scraper: yes, Number of tools per tool-magazine: yes, Number of sanding units: yes, Buffing unit: yes, Top pressure belt/roller: yes, Workpiece support: yes, Workpiece return: Rolle, Return type: yes, System dismantled: ca. 6700, FREE TEXT: ZHR 01, : ink Rückführung/ Verfügbarkeit ca. ab Jul ...

Fabricant : Weeke Modèle : Optimat BHC Venture 1 Année de fabrication : 2006 Heures d’ouverture : 20000h Électricité : - Alimentation : 400V / 50 Hz / triphasé + N - Puissance totale : 18 kW - Courant : 35 A - Tension de commande : 24V Pour en savoir plus, cliquez ici - / Contactez-nous à -

Pour en savoir plus, cliquez ici - / Contactez-nous à -

Machine à bandage de bords Type : KDF 220 Fabricant : Brandt Année : 2012 Machine pré-fraise Rayon Rondomat Cidliny de radius Grattoirs Machine en bon état, sous alimentation Pour en savoir plus, cliquez ici - / Contactez-nous à -

Fabricant : Venjakob Modèle : VEN SPRAY ONE Type : Machine automatique de revêtement par pulvérisation à ligne plate avec extraction à filtre sec Contrôle : PC à écran tactile de 15 pouces avec système de gestion de recettes Conformité : Certification CE, interface utilisateur et documentation disponibles dans la langue locale Spécifications techniques - Dimensions globales (L x Wide x H) : 4 084 x 4 000 x 2 600 mm - Largeur de travail : 1 300 mm - Vitesse d’avance : 1 à 4 m/min - Vitesse de rotation du canon : 0,4 à 2,0 m/s, variable à l’infini (max. 25 doubles coups) - Charge électrique connectée : 11 kW - Apport maximal d’air : 7 000 m3/h - Aire d’échappement maximal : 7 000

Edge banding machine Type: Sprint 1317 Manufacturer: Holz-Her Year: 2006 Edge Control with 18.5 16:9 color touch screen rotary control panel, memory for programs, motorized adjustment of the pressure beam, feed using a transport chain, feed 8–18 m/min extendable support surface for workpieces Trimming milling unit 1961, diamond cutting cutter in right- and left-hand operation, automatic adjustment to the height of the workpiece Edge feeding 1903 Pre-cutting up to 3 x 45 mm (depending on the material) Adhesive system 1905 Multi-System automatic adjustment of the glue height using the touch nozzle, Pressure regulator for adjusting cartridge pressure, the possibility of using PUR adhesives, pressure device 1913 MOT, 1. cylinder driven Trimming unit 1918 with pneumatic adjustment Pneumatic cut-off saw rotating Multifunctional unit 1824 MOT 4 with a multifunctional  ...

Manufacturer: IMA, Type: Maschinenstrasse Combima, Control: IMA, Work piece width min-max mm: 1 Maschine 250-1500, Min.-max. workpiece length in mm: 2 Maschine 250-2600, Min.-max. workpiece height in mm: 10-50, Feeding: Ja, Machine no 1: yes, Angular transfer: yes, Machine 2: yes, Drilling machine no1: no, Destacking unit: yes, Edgeband thickness max mm: 3, Edgeband height max mm: 50, Nockenabstand mm: 850, Coil magazine: 6-fach, Feeding speed max m/min: 10-30, Premilling: yes, Strip magazin: no, Kantenmagazin: yes, Mitre stations: yes, Trimming saw: yes, Büdigfräsen: yes, radius milling: yes, Fasefräsen: yes, Contour milling type: MFA, Radius scraper: yes, Flat scraper: yes, Spraying device: yes, Maschine vorführbereit: yes, Year :2000

Manufacturer: Brandt, Type: Optimat KD 77 C, Year: 1998, Program: Brandt, Work piece width min-max mm: 65, Min.-max. workpiece length in mm: 160, Min.-max. workpiece height in mm: 10, Edgeband height max mm: 60, Thickness of coiled edgeband max mm: 3, Vorschub min- max m/min: 11 , Premilling: no, Premilling: no, Mitre stations: yes, Glue system granulate/cartridge: Granulat, Mitre stations: yes, Radiusfräsen : yes, Schnellwechselmotore: yes, Flush/radius/chamfer milling: yes, Contour milling type: yes, Radius scraper: yes, Buffing unit: yes, Top pressure belt/roller: Rolle, Work piece refeeding: yes, Compressed air bar: 6, Noise enclosure: yes, Year :1998

A high-performance Homag Edgebanding Line paired with a Ligmatech Automatic Return System. This combination allows for a one-man operation, where the machine applies the edges and then automatically sends the panels back to the operator for the next pass. Below is a professional draft for an online listing. --------------------------------------------------------------- For Sale: 2007 Homag Optimat Edgebanding Cell Featuring: Homag KAL 310 Edgebander & Ligmatech ZHR 05 Return System This is a complete, industrial-grade edgebanding solution manufactured in Germany. The set consists of a high-speed Homag KAL 310 single-sided edgebander and a Ligmatech ZHR 05 Boomerang return conveyor. This setup is designed for high-volume production, significantly reducing labor costs by allowing a single operator to manage the entire infeed and outfeed process. Machine 1: Homag Optimat KAL 310/10/S ...

Motor output: 3 kWFilter capacity: 6 m²: 3500 m³/hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.