Tours à fileter et à charioter (286)

Diamètre de tournage au-dessus du lit : 500 mm Diamètre de tournage au-dessus du repose-glissière : 320 mm Longueur de tournage : 2100 mmHauteur du centre : 250 mm : mmAlésage de la broche : 60 mm Plage de vitesse de tournage : 11 - 2000 U/minPuissance totale requise : 7,0 kWPoids de la machine env. : 2,9 tDimensions de la machine env. : 4,3 x 1,2 x 1,3 mm Tours avec :- Poteau d’outil à 4 positions- Mandrin à 3 mors 315mm- Point de centrageLes données de cette annonce ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.

turning diameter over bed: 800 mmturning diameter over slide rest: 540 mmturning length: 4000 mmcentre height: 400 mmcentre distance: 4000 mmspindle turning speed range: 9 - 1140 U/minweight of the machine ca.: 8,0 t- with gap with insert - Accessories: 3-jaw chuck FORKARDT 400 mmø, 4-jaw chuck 500 mmø, faceplate 800 mmø, DRO on X-and Z-axis ACU-RITE, MULTIFIX-head with various inserts, 2 solid steadies, 1 running steady, running center, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diamètre de tournage au-dessus du lit : 460 mm Longueur de tournage : 1250 mmHauteur centrale : 230 mmentraxe : 1250 mm Plage de vitesse de tournage de la broche : 35 - 1800 U/minweight de la machine env. : 2,7 tAccessoires : mandrin à 3 mors 250 mmø, tête MULTIFIX avec 3 plaquettes, stable solideLes données de cette annonce ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.

Diamètre de tournage au-dessus du lit : 360 mm Diamètre de tournage au-dessus du support coulissant : 180 mm Longueur de tournage : 900 mm Plage de vitesse de tournage : 25 - 1600 U/minPuissance totale requise : env. 3 kWPoids de la machine env. : 1,5 tDimensions de la machine env. : 2,5 x 1 x 1,5 mLes données de cette annonce ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.

turning diameter over bed: 330 mmturning dia. in gap: 400 mmturning length: 600 mmcentre distance: 750 mmspindle turning speed range: 20 - 1000 U/minspindle bore: 25 mm3-jaw chuck: Röhm, Ø 200 mmdimensions of the machine ca.: 2000 x 800 x 1500 mmweight of the machine ca.: 1200 kgFixed bezelTurning bezelTurning center pointThree-jaw chuck Röhm, Ø 200 mm, incl. inner and outer jawsQuick-change tool holder Original Multifix size B with 2 change holdersSpindle brakeTailstock quill MK3Machine feetLathe chuck guardChip guardWork lightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0554 mm: 370 mm: 2000 mm: 280 mm: 104 mm: 11 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0390 mm: 240 mm: 1250 mm: 190 mm: 54 mm: 5,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 2000 mmcentre height: 330 mmswing diameter over bed slide: 660 mmswing diameter over slide rest: 460 mmturning dia. in gap: 900 mmspindle bore: 105 mmturning speeds: 25 - 1600 U/minbed width: 400 mmspindle taper: 55029 D 1-8taper in tailstock: 5 MKquill travel: 235 mmtotal power requirement: 7,5 kWweight of the machine ca.: 2900 kg.range L-W-H: 3630 x 1200 x 1520 mmScope of delivery :- 3-axis digital display ES-12 V with LCD display- Slip clutch- Rapid traverse longitudinally and flatly- LED machine light- 3-jaw chuck PS3-315 mm / D8- Clamping disk 450 mm- Fixed bezel - Passage diam. max. 180 mm- Revolving bezel - Passage diam. max. 120mm- 2 centering points- Motor with magnetic brake according to CE standards- Foot pedal with braking function according to CE- Initial filling with Shell Tellus 46- Coolant device- Quick-change tool holder with 4 inserts- Protective device  ...

turning length: 750 mmturning diameter: 310 mmturning diameter over slide rest: 175 mmspindle bore: 32,0 mmtailstock quill taper MT: 3 MKturning speeds: 85 - 2200 U/minbed width: 200 mmtotal power requirement: 2.2 kWweight of the machine ca.: 710 kgrange L-W-H: 1884 x 717 x 1262 mm New price ~ 23.000 euros from a training workshop ()Furnishing:- Spindle speed continuously adjustable in 2x switching stages- TOS 3-jaw lathe chuck Ø 160 mm, with spare jaws & chuck key- NEWALL digital display, front left- MULTIFIX steel holder with inserts- Movable tailstock- live center, incl. quick-action drill chuck- digital speed display- Change gears- Foot/spindle brake all technical data:- Turning diameter over bed 310 mm- Distance between centers 750 mm- Spindle bore 32 mm- Turning diameter over cross slide 175 mm- bed width 200 mm- Spindle mount / DIN55027 5- Spindle taper 4.5 M- Spindle speed infin ...

turning length: 600 mmturning diameter over bed: 360 mmturning diameter over slide rest: 190 mmbed width: 295 mmnumber of spindle speeds: 45 - 2240 U/min.spindle bore: 33,0 mmtailstock quill taper MT: MK 3 feed: Längs 0,02-0,8 mm/Ufeed: Quer 0,0125-0,5 mm/Utotal power requirement: 5,5 kWweight of the machine ca.: 1900 kgrange L-W-H: 2050 x 950 x 1280 mm Refurbished and repainted in 2013 Costs around 16.000 eurosFurnishing:- WNW NILES 3-jaw chuck Ø 200 mm- Multifix steel holder size B with inserts- revolving center points- chuck key- Movable tailstock- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 600 mmturning diameter over slide rest: 400 mmturning length: 1000 mmturning diameter in the gap: 850 mmturning speeds: 15 - 810 U/mincentre height: 300 mmspindle bore: 56 mmtotal power requirement: 9,0 KWweight of the machine ca.: 2,9 tdimensions of the machine ca.: 2,8 x 1,45 x 1,65 mCenter lathe- Forkardt 3-jaw chuck F 315- Single-jaw tool post- Steady rest- Live center- Chuck guard, limit switch monitored- Chip trayThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 410 mmturning diameter over slide rest: 260 mmturning length: 1000 mmturning diameter in the gap: mmturning speeds: 40 - 2000 U/mincentre height: 205 mmspindle bore: 50 mmtotal power requirement: 4,5 KWweight of the machine ca.: 1,6 tdimensions of the machine ca.: 2,4 x 1,3 x 1,5 mLeadscrew lathe- with copying device- 200mm 3-jaw chuck- 2x Multifix quick-change tool holders- Live center- Machine light- Chip trayThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diamètre de tournage au-dessus du lit : 800 mm Diamètre de tournage au-dessus du repose-glissière : 860 mm Longueur de tournage : 6000 mm Diamètre de rotation au-dessus du lit Glissière : 800 mm Diamètre de pivotement au-dessus du guide coulissant transversal : 520 mm Alésage de la broche : 71 mmvitesses : 11,2 - 1800 U/minvolt : 400 Vchuck : 315 mmmandrin : 630 mmPuissance totale requise : 15 kWPoids de la machine env. : tDimensions de la machine env. : Les données de cette annonce ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.

: 0460 mm: 270 mm: 1500 mm: 230 mm: 76 mm: 11 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diamètre de tournage au-dessus du lit : 400 mmHauteur du centre : 195 mmDiamètre de tournage au-dessus du repose-glissière : 246 mmLongueur de tournage : 650 mmVitesse de rotation de la broche - en continu : 0-2500 U/minPuissance totale requise : 7,5 kWPoids de la machine env. : 1,8 tDimensions de la machine env. : 2x1,3x1,6 m

turning diameter over bed: 420 mmturning diameter over slide rest: 290 mmturning length: 900 mmturning diameter in the gap: mmturning speeds: 40 - 2000 U/mincentre height: 210 mmspindle bore: 38 mmtotal power requirement: 4,0 KWweight of the machine ca.: 0,9 tdimensions of the machine ca.: 2,4 x 1,1 x 1,3 mLead and feed spindle lathe- 3-jaw chuck 220mm- Quick-change tool holder with 5 cassettes- Steady rest- Chip tray- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mmturning diameter over slide rest: 145 mmturning length: 550 mmcenter height over bed: 125 mmcentre distance: 550 mmbed width: 135 mmspindle bore: 26 mmturning speed range - stepless: 50 - 2.000 U/minpower requirement: 750 W3-jaw-chuck diameter: 125 mmtaper in tailstock-quill: MK 2 dia. of quill: 30 mmquill stroke: 70 mmvoltage: 230 Vweight of the machine ca.: 120 kgdimensions of the machine ca.: 1,25 x 0,60 x 0,50 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0390 mm : 240 mm : 1250 mm : 190 mm : 54 mm : 5,5 kW

Diamètre de tournage au-dessus du lit : 270 mm Diamètre de tournage au-dessus du support coulissant : 130 mmLongueur de tournage : 500 mmVitesse de tournage de la broche - en continu : 40-3000 U/minPoids de la machine env. : 1 tDimensions de la machine env. : 1,5x0,8x1,7 mAffichage numérique HEIDENHAINAccessoires divers

Diamètre de tournage au-dessus du lit : 360 mmHauteur du centre : 170 mmEntraxe : 650 mmDiamètre de tournage au-dessus de la glissière : 196 mmAlésage de la broche : 42 mmcône intérieur MT : 5 Vitesse de rotation de la broche - en continu : 20-3250 U/minPoids de la machine env. : 1,6 tDimensions de la machine env. : 200 x 125 x 165 cm

turning diameter over bed: 400 mmturning diameter over slide rest: 280 mmturning length: 1000 mmturning diameter in the gap: mmturning speeds: 70 - 2000 U/mincentre height: 195 mmspindle bore: 54 mmtailstock quill taper MT: 3 MKconnected load frequency: 400 Vtotal power requirement: 2,2 kWweight of the machine ca.: 0.85 tdimensions of the machine ca.: 1,95 x 1,0 x 1,75 mProfessional industrial machine3-axis digital display3-jaw chuck 200 mm.4-jaw chuck 200 mm.Faceplate 280mmBezel fixedBezel rotating4-fold steel holder.Halogen machine lightMachine lightFoot brakeremovable chip tray, chip protection wallHardened and ground bed railsComplete coolant systemFeed protectionMachine feetMachine toolThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0360 mm: 215 mm: 1000 mm: 180 mm: 45 mm: 3,75 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0350 mm: 196 mm: 0650 mm: 170 mm: 42 mm: 7,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0360 mm: 215 mm: 1000 mm: 180 mm: 45 mm: 2,25/3,25 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0330 mm: 210 mm: 0635 mm: 167 mm: 40 mm: 2,2 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0390 mm : 240 mm : 1000 mm : 190 mm : 54 mm : 5,5 kW

turning diameter over bed: 360 mmturning diameter over slide rest: 220 mmturning length: 1000 mmturning diameter in the gap: 380 mmturning speeds: 70 - 2000 U/mincentre height: 180 mmspindle bore: 50 mmtailstock quill taper MT: 3 MKconnected load frequency: 230 oder 400 Vtotal power requirement: 1,8 kWweight of the machine ca.: 0.65 tdimensions of the machine ca.: 2,0 x 0,8 x 1,56 mProfessional industrial machine3-axis digital display3-jaw chuck 180 mm.4-jaw chuck 200 mm.Faceplate 280mmBezel fixedBezel rotating4-fold steel holder.Halogen machine lightMachine lightFoot brakeremovable chip tray, chip protection wallHardened and ground bed railsComplete coolant systemFeed protectionMachine toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 410 mmturning diameter over slide rest: 240 mmturning length: 1000 mmcentre height: 205 mmcentre distance: 1000 mmspindle bore: 47 mmspindle turning speed range: 28 - 1250 U/minfeeds - longitudinal: 0,03 - 8,8 mm/Ufeeds - cross: 0,006 - 1,84 mm/Uthread - mm pitch: 0,25 - 76 mmthread - inch: 1/2 - 152 Gg/thread - module: 0,25 - 22 mmbed width: 320 mmtailstock quill diameter: 55 mmtailstock taper MT: 4 face slide travel: 290 mmupper slide travel: 120 mmtotal power requirement: 5,5 kWweight of the machine ca.: 1,3 tdimensions of machine L x W x H: 2,32 x 1,15 x 1,22 mAccessories: 3-jaw chuck RÖHM 160 mmø, MULTIFIX-head with 2 inserts, solid steady, running center, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 320 mmturning diameter over slide rest: 200 mmturning length: 900 mmturning diameter in the gap: mmturning speeds: 75 - 2000 U/mincentre height: 160 mmspindle bore: 50 mmtailstock quill taper MT: 3 MKconnected load frequency: 230 Vtotal power requirement: 1,5 kWweight of the machine ca.: 0,29 tdimensions of the machine ca.: 2,0 x 0,8 x 1,56 mProfessional lathe3-jaw chuck4-jaw chuckfaceplatebezel fixedrunning bezelQuick-change steel holder with 4 cassettesHalogen machine lightChip tray, chip protection wallHardened and ground bed tracksComplete coolant systemfeed protectionmachine toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Greates passe au-dessus du lit : 480 mmDiamètre de la balançoire au-dessus du lit glissière : 300 mmLongueur de tournage : 1500 mmHauteur du centre : 240 mmEntraxe : 1500 mmAlésage de la broche : 42 mmPlage de vitesse de rotation de la broche : 14 - 1400 U/minPuissance totale requise : kWpoids de la machine env. : 2,4 tdimensions de la machine L x l x H : 3,00 x 1,05 x 1,40 mAccessoires : mandrin à 3 mors 250 mmø, tête MULTIFIX, centre de course

turning diameter over bed: 320 mmturning diameter over slide rest: 200 mmturning length: 900 mmturning diameter in the gap: mmturning speeds: 75 - 2000 U/mincentre height: 160 mmspindle bore: 50 mmtailstock quill taper MT: 3 MKconnected load frequency: 230 Vtotal power requirement: 1,5 kWweight of the machine ca.: 0,29 tdimensions of the machine ca.: 2,0 x 0,8 x 1,56 mProfessional lathe3-jaw chuck4-jaw chuckfaceplatebezel fixedrunning bezelQuick-change steel holder with 4 cassettesHalogen machine lightChip tray, chip protection wallHardened and ground bed tracksComplete coolant systemfeed protectionmachine toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diamètre de tournage au-dessus du lit : 380 mmdiamètre de tournage sur le repose-glissière : 0 mmlongueur de tournage : 950 mmentraxe : 1000 mmhauteur centrale : 180 mmpuissance totale requise : kWpoids de la machine ca. : tdimensions de la machine ca. : m

turning diameter over bed: 520 mmturning diameter over slide rest: 300 mmturning length: 1000 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m3-jaw chuckMultifix tool holder devicetail stockTechnische Daten / technical details:Drehlänge / turning lenght 1000 mmDreh-Ø über Bett / turning Ø over bed 520 mmDreh-Ø über Schlitten / turning Ø over sledge 300 mmDrehzahlbereich / spindle speed 30-1600 UpM /rpmGewicht der Maschine ca. / weight 2500 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dreh-Øüber Bett: 400 mmDreh-Øüber Support: 220 mmturning length: 1000 mmspindle turning speed range: 12,5 - 2000 U/minspindle taper: Bajonett 55022 spindle bore: 47 mmfeeds - longitudinal: 0,07 - 4,16 mm/Ufeeds - cross: 0.035 - 2,08 mm/Uthread - mm pitch: 0,87 - 192 mmthread - inch: 2 - 24 Gang/ inch.rapid travel - longitudinal/face: 3,4 / 1,7 m/minspindle drive: 11 kWpower capacity: 13 kWweight of the machine ca.: 2,8 tdimensions of the machine ca.: 2,8 x 1,2 x 1,5 m• 3-jaw chuck Ø 250 mm, 4-jaw chuck 200 mm,• 2-axis- digital display, ANILAM WIZARD LATHE - refinished in 1992,The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dreh-Øüber Bett: 320 mmDreh-Øüber Support: 185 mmturning length: 1000 mmSpindelbohrungs -Ø/ Aufnahme: 32 mm mmspindle turning speed range: (12) 85 - 2000 U/minfeeds - longitudinal: 0,006 - 1,77 mm/minfeeds - cross: 0,003 - 0,888 mm/minthread - mm pitch: 0,1 - 28 mmthread - module: 0,1 - 1,75 mmthread - inch: 2,5 - 75 inch.voltage: 400 V / 50 Hzpower capacity: 2,2 kWweight of the machine ca.: 0.8 tdimensions of the machine ca.: 1,8 x 0,8 x 1,4 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diamètre de retournement sur lit: 490 mmdépendeur de retournement sur repose glissière: 280 mmdépense de rotation: 2000 mmpère centrale: 245 mmdépense centrale: 2000 mmalésage du fil: 62 mmdésoute totale requise: 7,5 kWpoids de la machine ca.: 3,5 tdimensions de la machine L x L x H: 3,78 x 1,17 x 1,42 mAccessoires: Mandrin à 3 mâchoires 240 mmø, plaque frontale 400 mmø, poteau d’outil MULTIFIX, solide stable, liquide de refroidissement