tours machines d'occasion à vendre (3,110)

Used machine Machine Type: CNC Swiss Automatic Lathe Model: Sprint32/8 Manufacturer: DMGMORI Control: Fanuc 32i First commissioning: 2019 #001328 Location: Germany T-main and sub-spindle - Y-axis on carriage 1 - Y-axis on carriage 2 - C-axis on main spindle - C-axis on sub-spindle - Tank for chips included Coolant Pump - Workpiece unloading belt - Flushing for counter-spindle pliers - Hinge belt chip conveyor - Signal lamp 4-colour - IEMCA Boss 338/32HD bar feeder This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

Key data: 1600 mm, 3500 mm, 800 mm

For sale is: 1 Piece Used Face and Lace Lathe Manufacturer: Werkzeugmaschinenfabrik Zerbst GmbH Type: DP1 / S3 x 3500 Year of manufacture: 1994 Technical data: Largest turning diameter over bed: 1,600mm Center width: 3,500mm Spindle bore: 100mm Face plate diameter: 1,250mm Total mass of the machine: approx. 24.8t incl. documentation Further pictures and videos can be sent on request. The following things have been renewed/repaired on the machine in the last four years: At the end of 2022, the tailstock was completely overhauled. New bearing and new tip and lubrication. 2024 Cross Support regenerated. Refurbishment of the wedge strips with new sliding coating, snatchers on the guideways smoothed by scraping, Bearing seats of the spindles made smooth, wedge strips in the contact surface and covering surface scraped. Lubrication pump cle ...

Used machine Machine type: CNC turning and milling center Model No.: CTXgamma1250TC4a Manufacturer: DMGMORI Control: Celos with Siemens 840D si First commissioning: 2020 #001348 Location: Germany Technical data - Main spindle as integrated spindle motor, ISM102 - Sub-spindle as integrated spindle motor, ISM 76 - tailstock function for the sub-spindle - C-axis and spindle brake (hydr.) - Chuck rinsing device of the main spindle, external - Absolute, direct displacement measuring systems X-'Y-'Z1-axis - Differential stress main spindle - 36-cavity tool disc magazine - Hinge belt chip conveyor - Coolant system 8/20/80 bar - Coolant supply through the sub-spindle - Coolant spray gun - Mechanical oil mist separator - Automatic work area door - Workpiece probes - Tool turret at the bottom This offer is subject to change and non-binding. Changes, errors and prior  ...

Used machine CNC turning-milling center Machine type: DMG MORI CLX450TC Control:DMG MORI SLIMline® Siemens Operate Year of Make: 2022 Location: Germany #0011281 Technical data Turning diameter max. spindle 1+2 approx. 400 mm Turning diameter standard spindle 1+2 approx. 250 mm Rod diameter max. spindle 1 approx. 65 mm X-axis approx. 750 mm Z-axis approx. 1,100 mm Y-axis approx. +-100 mm A-axis (spindle 2) approx. 1,200 mm B-axis approx. 240° (+-120°) mm Spindle speed 1+2 approx. 5,000 rpm Speed milling pindle approx. 12,000 rpm Rapid traverse X/Y/Z approx. 40 m/min Rapid traverse A spindle 2 approx. 40 m/min Rapid traverse B axis approx. 70 m/min Power spindle 1+2 max. approx. 17 (40%) kW Power milling spindle max. approx. 10.5 (40%) kW Facilities Main Drive Spindle 1/2 17KW 40% - 5000rpm - Turning-Milling Spindle HSK63 10,5KW 40% - 12,000rpm - tool magazi ...

Used machine Machine Type: CNC Turning Center Model: CLX 750 V3 Manufacturer: DMGMORI Control: SLIMllne® Multi-Touch Control Siemens Year of Make: 2021 Location: Germany #001273 Turning diameter max. approx. 700 mm Turning diameter standard approx. 610 mm Chuck size approx. 400 mm Turning length approx. 1,300mm Rod diameter max. approx. 127 mm Turret stations approx. 12 X-axis approx. 435 mm Z-axis approx. 1,300 mm Tailstock approx. 1,200 mm Spindle speed max. approx. 2,000 rpm Speed AGW max. approx. 4,000 rpm Rapid traverse X/Z approx. 30 m/min Compressed air bar,L/min approx. 5, 100 bar,L/min Machine weight approx. 10,200 kg Facilities - Main spindle A2-11" with AC motor, 36/46 kW (100/40%), 2,000 min-¹ - 3-jaw chuck 300mm - Partial hollow clamping device for the main spindle 127mm - Chuck flush for the main spindle - 12-fold servo tool turret mount VDI ...

Max. workpiece diameter: 25mm, max. workpiece length: 100mm, max. bar diameter: 25mm, max. stroke X/Z: 42mm/50mm, rapid traverse: 40m/min, number of spindles: 6, speed: 12000rpm, control: Siemens 840D Powerline.

One CNC lathe Takamaz X180 available. Turning diameter: 210mm, turning length: 230mm, spindle bore: 51mm, speed: 3500rpm, number of axes: 3, tool positions: 12, chuck size: 8inch (Kitagawa B208, 200mm), control: Fanuc 0i-TC, weight: approx. 4000kg.

A Mori-Say 6/32M multi-spindle curve lathe is available. Number of spindles: 6, max. spindle speed: 3750 rpm, max. bar diameter: 40mm. Dimensions X/Y/Z: approx. 6200mm/1600mm/2050mm, weight: approx. 9500kg.

A conventional lead and feed screw lathe Antonio Anslemi is available. Center height: 260mm, center distance: 1500mm, swing diameter over bed/support/gap bed: 520mm/320mm/670mm, bed width: 370mm, speed: 1400rpm, tailstock quill diameter: 65mm, tailstock stroke: 240mm, machine dimensions X/Y/Z: approx. 3000mm/1200mm/1500mm, weight: approx. 2500kg. An on-site inspection is possible.

Longitudinal and transverse feed. 3-jaw chuck 160 mm.4-jaw chuck 160 mm.Face plate4-way steel holder with 4 pcs. Tool holder2 pcs. Steady restsMachine lightDrip trayHardened bed panels.Emergency stop. Lining protectionset wheels.Machine Tools. Turning diameter over bed 290 mmTurning diameter over support 170 mmTurning length 750 mmSpeed 75 - 2000 rpmTip height 145 mmSpindle bore 38 mmTailstock quill holder MK 3 MKTailstock quill stroke 80 mmConnection voltage 230 VTotal power requirement 1.5 kWMachine weight approx. 0.34 tDimensions approx. 1.3 x 0.75 x 0.7 m Condition: never used / new (5)

INDEX Werke GmbH & Co. KG • Type: ABC • Year of construction: 2002 • CNC control: Siemens Sinumerik C200 • Condition: Used, fully functional, ready to use • CNC lathe for precise series and small series production • 2 spindles, max. 6,000 rpm • 2 tool turrets • Rear drilling station with driven tools • Suitable for bar processing • Bar feeder included • New Hainbuch chuck (built in 2023) • Coolant equipment available • Documentation / documents available • Machine ran in productive use until the end

Guide and tension spindle latheThree-jaw chuck 200mmMultifix steel holder size B3 pcs. Multifix cassettesEmergency stop deviceTurning diameter over bed 370 mmTurning diameter over support 200 mmTurning length 1000 mmCenter height 185 mmSpindle bore 56 mmTailstock quill holder MK 4Speed 50 - 2000 rpmDrive power 4.0 kWMachine weight approx. 1.4 tDimensions approx. 2.3 x 1.1 x 1.3 m

Circumferential diameter over bed : 640mm ; Turnings: approx. 2000mm ; Rotary diameter over support: 380mm ; Speed of main spindle range: 9-1800 rpm; see photos for more details

SINO digital display3-jaw chuck 200 mm.4-jaw chuck 200 mm.Face plate 250mmFixedbezel Quick-change steel holder with 4 pcs. Steel holderMachine lightChip tray, chip protection wallHardened and ground bed sheetsChuck protectionMachine toolsTurning diameter over bed 320 mmTurning diameter over support 200 mmTurning length 900 mmTurning diameter in the offset 320 mmSpeed 75 - 2000 rpmTip height 160 mmSpindle bore 38 mmTailstock quill holder MK 3 Connection voltage 400 VTotal power requirement 1.5 kWMachine weight approx. 0.4 tDimensions approx. 1.6 x 0.75 x 1.7 m Condition: never used / new (5)

including hydraulic bezel Guide rails from the machine bed should be reground without 4-fold steel holder and chuck visible raw material is not included in the article scope

Guide and pull spindle lathe:3-jaw chuck 160 mm.4-jaw chuck 200 mm.Face washer200mm steadyrest fixed steady rest running4-fold steel holder.Halogen machine lightChip tray, chip protection wallHardened and ground bed tracksLongitudinal and transverse feedComplete coolant systemChuck protectionKit changegears Machine toolsTurning diameter over bed 320 mmTurning diameter over support 220 mmTurning diameter 600 mm Turning diameter in offset 320 mmSpeed 60 - 1650 rpmCenter height 160 mmSpindle bore 38 mmTailstock quill holder MK 3 MKConnection voltage 400 VTotal power requirement 1.1 kW Condition: never used / new (5)

Takamaz XY-2000 Plus CNC Lathe (2008) Manufacturer: Takamaz Model: XY-2000 Plus CNC Lathe Year of manufacture: 2008 Control system: Fanuc 31i-A Condition: Used, under power and currently in production - 2 spindles (2 collet chucks by Hainbuch) - 2 tool turrets, both equipped Equipment / Accessories: - Parts catcher - Bar feeder Top Automazioni XF365 (Dimensions: approx. 4400 × 1100 × 1700 mm Weight: approx. 2200 kg) - Chip conveyor - Documentation - Incl. tool holders (picture) - Additional collets transportation dimensions and weitght: length: 13m width: 2.4m HighT: 2.6m total weight: approx. 11to

Table lathe with base cabinet2-axis LCD digital display system.Longitudinal feed. 3-jaw chuck 125 mm.4-jaw chuck 125 mm.4-way steel holder. Drip trayHardened bed sheets.Emergency stop. Lining protectionset wheels.Suitable tools. Turning diameter over bed 250 mmTurning diameter over support 140 mmTurning length 550 mmSpeed 50 - 2000 rpmCenter height 125 mmSpindle bore 26 mmTailstock quill holder MK 2 MKTailstock quill stroke 65 mmConnection voltage 230 VTotal power requirement 1.1 kWMachine weight approx. 0.15 tDimensions approx. 1.3 x 0.6 x 1.3 m Condition: never used / new (5)

Technical data tip height: 220 mm Center width: 1,000 mm or 1,500 mm (depending on model) Circumferential diameter over bed: 440 mm Circumferential diameter over slide: 270 mm Rotation in offset: 630 mm Spindle bore: 52 mm Speed range: 25 – 2,000 rpm (18 steps) Motor power: approx. 6.3 kW Tailstock mount: MK 4

3-jaw chuck with 1 set of drill jaws,short taper receptacle size 6 (bolt circle 133.4mm)Bayonet lock,chuck wrench,diameter 200 mm,height 150 mm,passage 55 mm,machine weight approx. 30 kg

Professional industrial machine (400Volt)3-axis digital display3-jaw chuck 180 mm.4-jaw chuck 200 mm.Face plate 280mmsteadyrest steady rest4-fold steel holder.Halogen machine lightMachine lightFoot brakeRemovable chip tray, chip protection wallHardened and ground bed tracksComplete coolant systemChuck protectionMachine toolsTurning diameter over bed 360 mmTurning diameter over support 220 mmTurning length 1000 mmTurning diameter in offset 380 mmSpeed 70 - 2000rpm Center height 180 mmSpindle bore 50 mmTailstock quill mount MK 3 MKConnection voltage 230 VTotal power requirement 1.8 kWMachine weight approx. 0.65 tSpace requirement approx. 2.0 x 0.8 x 1.56 m Condition: never used / new (5)

number of spindles:8 spindle passage:67 mmCam controlled multi spindle automatic lathe, used8 main spindlespick up in pos. 8threading attachmentCNC compound slide in pos. 5, also 2. speed in pos. 2Hydraulic spindle brake in pos. 4Incl. length measurement, incl. Brankamp cutting force monitoringtooling: could be different like picturesPlease, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com

Guide and pull spindle turning machine- with copying device- 3-jaw chuck 200mm- 2 pcs. Mutifix quick-change steel holder- Moving center punch- Machine light-Chip tray Turning diameter over bed 410 mmTurning diameter over support 260 mmTurning length 1000 mmTurning diameter in the offset mmSpeed 40 - 2000rpm Center height 205 mmSpindle bore 50 mmTotal power requirement 4.5 KWMachine weight approx. 1.6 tDimensions approx. 2.4 x 1.3 x 1.5 m

Article: Vertical turning and grinding centreManufacturer: EMAGType: VSC 250 DSYob: 2008Control: SIEMENS 840DGrinding spindle speed: 30,000 rpmRotation spindle speed: 3,000 rpmTool places turret: 12Cooler for spindle and machine bed coolingCooling lubricant - lifting station (no independent cooling lubricant supply)Chip conveyorParts handling Air through the spindleTwo clamping circuits through the spindle (air and oil)Unfortunately, the grinding spindle is defective. However, this can be overhauled in a spindle factory. Otherwise the machine is in a very good condition and fully functional.Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:8 spindle passage:51 mmArticle: multi spindle automatic latheManufacturer: SchütteType: AF51Yob: 1987eight main spindlesmax. bar diameter D=51mmcontrol SIEMENS SIMATIC S5pick up in pos. 7, for rear machiningthread cutting driveindependent feed in positions 2/3electronical trip dog control ?Balluff?clear text display Wöhrlecoolant pumpmagnetic cartridge filteroil runningincl. bar loader IEMCA PRA 40/37/F, yob 1987, (bundle type)Painting in light blue and light greyThe configuration of tooling will be different like pictures.Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: CNC-controlled multi-spindle automatic latheManufacturer: TornosType: MultiSwiss 8x26Yob: 2016full cross slide configuration,counter spindle,part-pre-drawing device,2 x driven tools,3 x Y-axis,1 rigid backworking,1 x driven backworking,2x 80 bar high pressure pumpsoptional: setting robot, manufacturer HandlingTech.The scope of delivery regarding the tooling equipment could be different like pictures.Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com

Article: CNC-controlled multi-spindle automatic latheManufacturer: TornosType: MultiSwiss 8x26Yob: 2019full cross slide configuration,counter spindle,part-pre-drawing device,2 x driven tools,1 rigid backworking,1 x driven backworking,2x 80 bar high pressure pumpsoptional: setting robot make HandlingTech.The scope of delivery regarding the tooling equipment could be different like pictures.Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com

number of spindles:6 spindle passage:51 mmSchutte SF51 DNT, yob. 1987, our ID #61868Article: cam-controlled multi-spindle automatic latheManufacturer: SchütteType: SF51 DNTYob: 1987Six-spindle automatic lathe with 6 main spindlesmax. nominal diameter D=51mmelectronic cam control Balluffgripper in position 6 for backworking, sorting chuteindependent longitudinal feed layer 5screw chip conveyorTapping couplingsInterface for: Bar feeder IEMCA PRABar feeder IEMCA PRA40/33/FScope of delivery without the blue chip conveyorThe tooling will differ from the scope of delivery!Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com