aléseuses, centres d'usinage machines d'occasion à vendre (530)

Auction-ID: A1-48377-22

bore capacity in steel (diameter): 32 mmthroat: 232 mmbore stroke: 150 mmSpindle Speed: 115 - 2470 U/min.tool adaptor: MK 3 weight of the machine ca.: 280 kgdimensions of the machine ca.: 500 x 950 x 1800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 16 mmspindle taper: MK 2 turning speeds: 280-3550 U/mintable surface area: 243 x 243 mmquill stroke: 90 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 25 mmthroat: 210 mm: total power requirement: kWweight of the machine ca.: 0.085 trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel St 60: 30 mmbore capacity in cast iron GG 20: 30 mmDrilling capacity in St 60: 30 mmthreading in St 60: M 16 threading in GG 20: M 20 Short spindle: MK 3 spindle stroke: 140 mmthroat: 293 mmcolumn diameter: 115 mmMachine table - usable table surface: 514 x 360 mmT-Slots Amount - Width - Distance: 2 x 14 x 224 mmDistance spindle-table min.: 132 / 724 mmfeed: von Hand spindle turning speed - stepless: 100 - 1.800 U/mintotal power requirement: 1,0/1,6 kWweight of the machine ca.: 260 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-48377-27

bore capacity in steel (diameter): 50.0 mmthroat: 360 mmbore stroke: 225 mmmorse taper: 4 MKtable:: 570 x 480 mmthreading: M 42 Stahlturning speeds: 50-316 / 316-2200 U/minfeed: 0.08 - 0.50 mm/Ucolumn diameter: 180 mmdistance spindle /table: max. 580 mmdistance spindle/base plate: max. 1185 mmtotal power requirement: 3.0 kWweight: 630 kgrange L-W-H: 1020 x 750 x 2340 mmScope of delivery- Keyed drill chuck 1 - 13 mm / B 16- Drill chuck arbor MK 4 / B 16- Reducing sleeve MK 4 / 3, MK 4 / 2, MK 3 / 1- Motorized table stroke- Coolant device- Touchscreen- Automatic tool ejector- Electromagnetic spindle feed- Thread cutting device- Initial filling with Shell Tellus 46- LED machine light- Digital speed display- Digital drilling depth display- Height-adjustable protective coverThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-48377-8

x-travel: 800 mmy-travel: 900 mmz-travel: 620 mmControl: Heidenhain TNC 640 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mMilling-turning machining centerThe machine is being sold in a defective condition.The rotary tilting table needs to be repaired.Spindle torque: 253NM / 12000min-1 / HSK 63Travel paths: 800/900/620mmControl: Heidenhein TNC 640Turning function: 4000Nm / 750rpm / diameter 800mm / max. 2000kgPallet changer: 6-pos, Pallet weight max 1 ton (pallet + workpiece)Tool changer: 60 places (expandable to 120 places)incl. spare spindleincl. palletsoptional: 4-jaw chuck SMW AutoblokOperating hours: 3469 h (Jan. 2025)X-axis travel:800 mmY-axis travel:900 mmZ-axis travel:620 mmX-axis rapid traverse:50 m/minY-axis rapid traverse:50 m/minZ-axis rapid traverse:50 m/minTorque:253 NmControl manufacturer:HeidenheinControl model:TNC 640Table load: ...

bore capacity in steel (diameter): 40 mmbore stroke: 190 mmturning speeds: 50-1800 U/minShort spindle: MK 4 Table dimensions: 500x400 mmtotal power requirement: 2,2 kWweight of the machine ca.: 330 kgdimensions of the machine ca.: 670 x 500 x 2120 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40 mmthreading in St 60: M24 threading in GG 20: M30 : MK 3 spindle stroke: 120 mm: 80-1.125 U/min.throat: 293 mmcolumn diameter: 115 mm: 514 x 360 mm: 2 x 14 x 224 mmdistance spindle /table: min. 117 / max. 701 mmfeed: 0,1 + 0,2 mm/Uheight of the machine: ca. 1840 mmweight of the machine ca.: 270 kgStandard equipment:- 7 TFT LCD display with touch function: Manual input of spindle speed set value Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status indicators and warnings on the display Service information Selectable operating language: DE/EN/FR/ES/IT/NL/RU- Thread cutting device, for thread cutting with stop, max. 6thread/min (thread cutting capacity depending on spindle speed), thread depthadjustable via depth stop and on the TFT LCD display (4 tools)- Infinitely variable speed adjustment via ...

Spindle Speed: 80-3200 U/min.: 30 mm: 25 mmtable surface area: 500x365 mmbore depth: 125 mmthroat: 260 mm: MK 3 distance spindle /table: 90-840 mmT-slot - width: 14 mmcolumn diameter: 110 mmweight of the machine ca.: 270 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 6 mmtotal power requirement: 1 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 50 mmbore capacity in cast iron: 56 mm: 50 mm: M 30 : M36 : MK 4 throat: 300 mm: 615x430 mm: 70-4000 U/min.: 2x14x224 mmDistance spindle/table max.: 147/688 mmcolumn diameter: 145 mmspindle stroke: 160 mmfeeds: 0,1-0,4 mm/Uheight of the machine: 1885 mmdrive motor: 1,8/2,9 kWweight of the machine ca.: 530 kgStandard equipment:- Electromagnetic feed clutch with overload protection and electricalCross Handle Switches- Control and light transformer- Main switch lockable- Mushroom pushbutton (latching) for EMERGENCY STOP in the front panel- Clockwise rotation by contactor control- Speed adjustment stepless- Speed display digital- Speed setting electrically- Protection IP 54- Motor insulation class F- Spindle protection with electrical protectionPos. 12LED machine lamp with radially adjustable light beam, supply voltage 24Volt, protection class IP 65Pos. 20.1Tapping device with foot switch, ...

bore capacity in steel (diameter): 40 mmthroat: 285 mmbore stroke: 160 mmSpindle Speed: 150-2.000 U/min.spindle taper: MK4 column diameter: 115 mmtotal power requirement: 1,5/2,2 kWweight of the machine ca.: 275 kgdimensions of the machine ca.: 1000x700x1900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Un dépôt de 4125,00 € est requis pour soumettre une offre sur ce lot. Pour obtenir les coordonnées bancaires nécessaires au transfert, veuillez contacter le représentant de la vente aux enchères au alessandro.icardi@surplex.com. Vitesse d’avance rapide 42 m/min Vitesse de coupe 1-8000 mm/min Changeur d’outils à 30 positions Diamètre maximum de l’outil 80-125 mm Poids maximal de l’outil : 8 kg Précision du positionnement sur l’axe X 0,015 mm Précision de positionnement axes Y/Z 0,010 mm Répétabilité sur l’axe X 0,006 mm Répétabilité des axes Y/Z : 0,004 mm Tables, ustensiles et accessoires inclus ATTENTION ! POUR LE TRANSPORT, UN TRANSPORT EXCEPTIONNEL DANS UN RAYON DE 3 MÈTRES DE LARGEUR EST NÉCESSAIRE Note : La fonctionnalité des biens n’a pas été vérifiée. Ils sont vendus dans leur état actuel, sans garantie de fonctionnement. Il convient de no ...

bore capacity in steel (diameter): 20 mmthroat: 250 mmbore stroke: 125 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mmthreading: bis M 30 throat: 330 mmbore stroke: 180 mm: 4 speeds: 60 - 765 U/mintable-size: 720 x 360 mmtotal power requirement: 2,6 / 3,2 kWweight: 350 kgdimensions: 720 x 1100 x 2050 mmEquipment:- automatic feed- infinitely variable speed- thread cutting device- adjustable drilling depth stop- coolant device- spindle protection- drill chuckThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1600 mmy-travel: 1250 mmz-travel: 1600 mmB-axis (table): 360.000 x 0,001° degmilling-head swivable +/-: (HV) 360.000° degpallet size:: 1000 x 800 mmtable load: 3000 kgtool taper: SK 50-B Plananlage 125spindle turning speed range: max. 8000 U/mintransmission ratio: 2 spindle drive: (100/40 % ED) 37/50 kWfeeds x/y/z -stepless: 30000 mm/minmax. torque on the spindle: 1410/2000 (100/40 % ED) Nmtotal power requirement: 100 kVAweight of the machine ca.: tdimensions of the machine ca.: 11555 x 7998 x 5050 mmUniversal machining center 5 axes simultaneouslyOriginal purchase price: EUR 1.295.000,-First machine installation in September 2011.A geometry measurement report (dated 30. August 2025) is available.Equipment:CNC-control Siemens 840D Solution LineSeparate handheld control unit, wired, Siemens HT-22-station pallet changer with safety light barrier 110-position tool changer (m ...

bore capacity in steel (diameter): 50.0 mmthroat: 300 mmbore stroke: 160 mmthreading: M 30 turning speeds: 100 - 1600 U/mintable:: 615 x 430 mmbore spindles - Morse Taper: 4 Kurzspindel MKcolumn diameter: 145 mmfeed: 0.1-0.2-0.3-0.4 mm/Udistance spindle /table: 147 / 688 mmengine output: 1.8 / 2.9 kWweight: 450 kgMachine height: 1865 mmFurnishing :- automatic feed with electromagn. Feed clutch- 4 feed rates 0.1-0.2-0.3-0.4 mm / rev- stepless speed adjustment- digital speed display- Feed overload protection- Spindle protection with electr. validation- digital speed display- machined base plate- Motor 1.8 / 2.9 KW - 100 - 1600 rpm.Special accessories included:- LED machine light pos. 12.- Thread cutting device pos. 20.0 (Thread cutting with stop)- Coolant device A pos. 24. (Coolant base plate, complete)- digital drilling depth display pos. 37.1 (5-digit LED display)The data for this ad  ...

bore capacity in steel (diameter): 55.0 mmthreading: M 30 / M 42 throat: 300 mmbore stroke: 140 mmturning speeds: 70 - 1200 U/mintable:: 615 x 430 mmbore spindles - Morse Taper: 4 Kurzspindel MKcolumn diameter: 145 mmfeed: 0.10 + 0.30 mm/Udistance spindle /table: 150 / 735 mmweight: 380 kgMachine height: 1850 mmFurnishing :- automatic feed- Feed device 0.1 + 0.3 mm / rev- stepless speed adjustment- digital speed display- Feed overload protection- Spindle protection with electr. validationincluding special equipment:- Coolant device mounted in the foot pos. 24.- Thread cutting device pos. 20.0 (Thread cutting with stop)- LED machine light pos. 12.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 60.0 mmthreading: M 42 throat: 350 mmbore stroke: 200 mmturning speeds: 60 - 1530 U/mintable:: 720 x 510 mmbore spindles - Morse Taper: 4 Kurzspindel MKcolumn diameter: 200 mmfeed: 0.15-0.2-0.3-0.36 mm/Udistance spindle /table: 159 / 884 mmengine output: 3.6 / 4.3 kWweight: 605 kgMachine height: 1950 mmFurnishing :- automatic feed with electromagn. Feed clutch- 4 feed levels 0.15 / 02, - 0.3 - 0.36 mm / rev- stepless speed adjustment- digital speed display- Feed overload protection- Spindle protection with electr. validation- digital speed display- machined base plateincluding special equipment:- Coolant device mounted in the foot pos. 24.- Thread cutting device pos. 20.0- LED machine light pos. 12.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 23.0 mmthroat: 250 mmbore stroke: 100 mmmorse taper: 2 MKtable:: 370 x 300 mmturning speeds: 225 - 4300 U/mincolumn diameter: 90.0 mmdistance spindle /table: 140 / 670 mmengine output: 0.6 / 0.95 kWweight: 175 kgMachine height: 1770 mmFurnishing :- Mushroom pushbutton (latching) for EMERGENCY STOP- Reversing switch for clockwise and counterclockwise rotation- Motor protection switch- Infinitely variable speed adjustment- Digital speed display- Protection class IP 54- Connection plug (fully assembled, cable length 2m)- Spindle protection with electrical fuse- Painting: DD textured paint, light gray RAL 7035, anthracite RAL 7016The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of spindles: 4 Stkbore capacity in steel (diameter): 25 mmspindle distance: 475 mmtable-size: 450 x 1900 mmmorse taper: MK 4 total power requirement: 10,2 kWweight of the machine ca.: 3 tNumber of spindles: 4Drilling capacity in steel: 25 mmSpindle center distance: 475 mmTable size: 450 × 1,900 mmSpindle taper: Morse taper MT 4Total power requirement: 10.2 kWMachine weight: approx. 3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40.0 mmthroat: 293 mmbore stroke: 120 mmmorse taper: 3 MKtable:: 515 x 360 mmturning speeds: 160 - 2250 U/mincolumn diameter: 115 mmfeed: 0.10 + 0.20 mm/Udistance spindle /table: 117 / 701 mmtotal power requirement: 1.45 / 1.90 kWweight: 285 kgrange L-W-H: 500 x 800 x 1840 mmFurnishing:- autom. Feed 0.10 + 0.20 mm / rev- stepless speed adjustment- Short spindle MK 3- Mushroom pushbutton (latching) for EMERGENCY STOP- Reversing switch for clockwise and counterclockwise rotation- Digital speed display- Feed overload protection- Spindle protection with electrical fuse- 2 m cable with plug 16A- Operating instructions in Germanincluding special equipment:- Coolant device B pos. 25.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 35,0 mmbore capacity in cast iron: 40,0 mmthreading: M 24 in Stahlthroat: 320 mmmorse taper: 4 MKbore stroke: 160 mmturning speeds: 65 - 3250 U/mintable:: 500 x 420 mmthroat: 320 mmweight: 375 kgrange L-W-H: 600 x 870 x 2.170 mm 2019 showroom model () Approx. 1 hour of operation Special price on requestFurnishing:- Infinitely variable speed, ideal for- Set the desired cutting speed.- Automatic tool ejector and thread cutting device as standard- Electromechanical drilling feed, adjustable from 0.1 - 0.3 mm / rev- Solid gray cast iron table with rotating and swiveling support surface- T-slots in the machine base enable high workpieces to be clamped- Guaranteed concentricity 0.02 mm, measured in the quill- Hardened and ground gears ensure smooth running- Adjustable drilling depth stop with an easily readable scaleScope of delivery:- Key chuck 1 - 13 mm / B ...

Avec 4 pompes à vide Becker, un meuble d’interrupteur, un convoyeur à bande d’alimentation Tretek de 1900x3700 mm, un convoyeur à bande de sortie 4200x2100 mm, un robot Yaskawa 6 axes pick-n-place avec dispositif de levage à vide Schmalz, un meuble d’interrupteur et une télécommande Auction-ID: A1-48377-4

: 30 mm: M 16 : M 20 : MK 3 : 225 - 4300 U/min.spindle stroke: 140 mmthroat: 293 mmcolumn diameter: 115 mm: 514 x 360 mm: 2 x 14 x 224 mm: 132 / 724 mmfeed: Hand 0: stufenlos total power requirement: 1,0 / 1,6 kWStandard equipment:- Motor protection switch- Reversing switch for clockwise and anti-clockwise rotation- Speed adjustment stepless- Protection IP 54- Mushroom pushbutton (latching) for EMERGENCY STOP- Spindle protection with electrical protection- Speed display digital- Connector (fully assembled, cable length 2 m)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 12 mm: M12 mm: 30 mm: M 16 : M 20 : MK 3 : 225 - 4300 U/min.spindle stroke: 140 mmthroat: 293 mmcolumn diameter: 115 mm: 514 x 360 mm: 2 x 14 x 224 mm: 132 / 724 mmfeed: Hand 0: stufenlos total power requirement: 1,0 / 1,6 kWweight of the machine ca.: 260 kgStandard equipment:- Motor protection switch- Reversing switch for clockwise and anti-clockwise rotation- Speed adjustment stepless- Protection IP 54- Mushroom pushbutton (latching) for EMERGENCY STOP- Spindle protection with electrical protection- Speed display digital- Connector (fully assembled, cable length 2 m)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32,0 mmthroat: 230 mmbore stroke: 120 mmmorse taper: 3 MKtable:: 400x320 mmturning speeds: 105 - 1725 U/mintotal power requirement: 1,2 kWweight: 245 kgrange L-W-H: 470x810x1710 mmFurnishing:- Compact, stable cast iron construction in a modern design- Infinitely variable speed control- is changed The speed is read on a digital display- Table height adjustment via rack and crank- Right and left rotation of the quill for thread cutting- Powerful 2-stage motor, speed range from 105 - 1725 rpm- Base plate with T-slots for clamping high workpieces- Safety switch with undervoltage release- The spindle runs in the precision ball bearingscope of delivery- Key chuck 1 - 13 mm / B 16- Drill chuck arbor MK 3 / B 16- Reducing sleeve MK 3/2- Digital speed display- LED machine light- Height-adjustable protective coverThe data for this ad was created with ModulMWS - t ...