aléseuses, centres d'usinage machines d'occasion à vendre (530)

bore capacity in steel St 60: 30 mmbore capacity in cast iron GG 20: 30 mmDrilling capacity in St 60: 30 mmthreading in St 60: M 16 threading in GG 20: M 20 Short spindle: MK 3 spindle stroke: 140 mmthroat: 293 mmcolumn diameter: 115 mmMachine table - usable table surface: 514 x 360 mmT-Slots Amount - Width - Distance: 2 x 14 x 224 mmDistance spindle-table min.: 132 / 724 mmfeed: von Hand spindle turning speed - stepless: 225 - 4300 U/mintotal power requirement: 1,0/1,6 kWweight of the machine ca.: 260 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dowel hole drilling machine Brand: VITAP Type: ALFA 21 CLASSIC New machine - One boring unit 21 spindles - QUICK CHANGE SPINDLES - Pneumatic cylinder for horizontal/vertical positioning of the boring group (45 degreed and any intermediate angles) - Front/top caliper to obtain the same boring measure between horizontal and vertical position - Tilting side stops adjustable by metric scale and nonius and magnifying lens on each stop - 2 safety clamps inclined 4 degrees - Height regulation of the boring group by mechanical digital position indicator; - 6 positions turret to adjust the drilling depth (0-80 mm) - Automatic vertical-horizontal depth difference device (10 mms) - Drilling speed adjustment from the panel control - Strengthened steel structures for tilting of the boring group - 1 motor HP. 2 (Kw 1,50) - Start/stop electropneumatic circuit by mean ...

New CNC drilling- and dowel inserting machine Brand: VITAP Type BLITZ 3.0 Blitz CNC drilling glueing and dowel inserting machine (axis X) 1300mm. Highly efficient and reliable thanks to a easy software. Ideal for JUST IN TIME production or mass production. Machine standard equipment: - Drilling head 3500 rpm - N °3 horizontal indipendent spindles - N° 3 vertical indipendent spindles - N °1 glue and dowels inserting unit - N °1 high capacity vibrator to feed the dowels - N° 1 low pressure pump for the glue Working area horizontal head: - X= 1300 mm - Y= 50 mm - Z= 50mm (vertical) - Z=25mm (horizontal) Combined drilling and driving unit for dowels: - Configurations of min. 6 x 25 mm and max. 10 x 40 mm are possible. - The desired dowel configuration must be specified when ordering. Sets for further dowel configurations are optionally availab ...

Bore diameter: , mmNumber of heads horizontal: , St.Number of heads vertical: , St.2 pcs. Götzinger drilling and milling centers----------------------------------------For sale on behalf of a customer!2 identical machines:One machine for left parts and one for right parts.The machines can also be used individually.The machines were controlled via window manufacturing software, but can also be operated via the machine software.Both machines are equipped identically:- Left and right drilling units for front-end drilling.- 3 units for drilling and milling for longitudinal machining.- Parts are loaded once, and the unit carrier then moves for the various machining operations.Installation length per machine approx. 6 m.Individual sale possible:Price per machine 10,000 EuroSee the enclosed PDFs for more information.The data for this ad was created with ModulMWS - the software solution of Logo ...

Pitch: 32 mmWorking width: 896 mmBoring depth max.: 65 mmMotor output: 2x1,5 kWOverall size: 1122x1040x1250 mmWeight: 380 kgNumber of boring spindles: 29 St.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pitch: 32 mmWorking width: 1088 mmBoring depth max.: 85 mmMotor output: 2x1,5 kWOverall size: 1320x1040x1250 mmWeight: kgNumber of boring spindles: St.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pitch: 32 mmWorking width: 704 mmBoring depth max.: 70 mmMotor output: 1,5 kWWeight: 310 kgNumber of boring spindles: 23 St.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Koch, Type: BD 61 PTP, Year: 1996, Control: Beckhoff, Software: Beckhoff, Working width min-max mm: 50-1200, Min.-max. workpiece thickness in mm: 10-50, Drilling support horizontal: 1, Drill gearings: 1, Drill gearings: 1, Drill gearings: 1, Number of drill spindles: 1, Drilling engine kW: ca.1,0, Working range max mm: 60, Axis-controlled: X/Z, Dovel lenght mm: 8 X 30, Number of doveling tools: 1, Elektronische : yes, Dowel monitoring: yes, Glue high-pressure pump: Niededruck, Glue quantity setting: yes, Beleimwerkzeuge: 1, Dovel insertion: yes, Dowel size mm: 8, Drilling depth: 45, Drilling hight: 50, Year :1996

Manufacturer: Homag Doppelspindelfräse 4 Achsmaschine, Type: BMG 512, Control: Woodwoop 6.0, Min.-max. workpiece length in mm: 4500, Min.-max. workpiece height in mm: 1600, Aluminium processing: 300, Throuh running machine: yes, Feeding speed max m/min: yes, C axis: 2, B-axis: HSK 63, Pendulum processing: ca.12, Work piece width min-max mm: 1800-24000, Min.-max. workpiece length in mm: ca.12, Horizontal: 1, Number of milling spindles vertical: 14, rpm 1): 9, Milling engine 2 hours power: 6, rpm 2): 2, Number of tool changers: 2, Kettenwechsler: yes, Pickup Wechlser: yes, Working widht max mm: 6, Horizontal drills-X: yes, Belt conveyor: yes, Number of tables: yes, Traverse table: 120, Aluminium sleeking table: Automatisch, roller table: 16, 2 station allocation: yes, Stops in the table rear: yes, Drill vertical: yes, Edgeband hight mm: yes, Magazine Qty: no, Schnittstelle DXF: ink.Werkze ...

Manufacturer: Biesse 5 Achsmaschine, Type: Arrow FT-5 Achsmaschine, Year: 2007, Control: XP 600, Working range X: 2 X 1600 , Working range Y-axis: 2600, Working range Z: 300, C axis: yes, B-axis: yes, Pendulum processing: yes, Number of milling spindles: 1, Tool adaption system: HSK 63F, Milling engine 1 hours power: 12, rpm 1): ca. 24000, Number of tools per tool-magazine: 10, Vertical drills-X: 18, Horizontal drills-X: 3, Number of tables: 2, raster table: yes, 2 station allocation: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 2 X 250, Drill vertical: 3, Saw unit: 120 mm, Portal machine: yes, Werkstückspannsystem: Vakuum, Schnittstelle DXF: yes, Zentralschnierung: yes, Available: sofort, FREE TEXT: Wassergekühlte Spindel, Year :2007

Manufacturer: Homag BAZ , Type: 211 Venture 22 L, Year: 2006, Control: Woodwop/Powercontrol PC 85, Software: Softwarepaket AV, Work piece width min-max mm: 4400 X 1550, Feeding speed max m/min: X= 80/Y=80/Z=30, C axis: yes/Schnittstelle Flex 5, Pendulum processing: yes, Work piece width min-max mm: 4400 X 1550, Number of milling spindles: 1, Number of milling spindles vertical: 1, Tool adaption system: HSK 63 F, Milling engine 1 hours power: 12, rpm 1): 1500-24000, Number of tool changers: 1, Tellerwechseler: 1, Pickup Wechlser: Verleimteil/Easy Edge, Number of tools per tool-magazine: 18, Vertical drills-X: 11, Drill vertical Y: 7, Horizontal drills-X: 1, Drill horizontal Y: 2, Traverse table: 8 Traversen, 2 station allocation: yes, Stops in the table front: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 250, Saw unit: yes, Edgebanding unit: yes, Edgeband hight mm: 60, LED-Rüs ...

Manufacturer: Weeke, Type: Optimat BHX 500, Year: 2008, Control: PC 85, Software: Woodwop, Barcode: yes, Operating system: Windows, Machining stations: 2, Work piece width min-max mm: 70 - 1.000 (1.250), Work piece length min-max mm: 200 2.500, Work piece thickness min-max mm: 8 - 80, 3 axis control: yes, Working range X: 2.500, Working range Y-axis: 1.000, Vertical drilling station from below: 1 = 36 Spindeln, Vertical drilling station from above: 1 = 36 Spinden, Automatic setting up: yes, Transmission station: yes, Spindles controlled from below: x=8/Y=2, Spindles retrievable horizontal: 1, Tool changer: no, Power kW 1: 6, Machining stations: 2, FREE TEXT: einschl. Beschickung und Igeltransport, Year :2008

Manufacturer: Homag, Type: BAZ 20/50/16/V/KA, Year: 2000, Control: NC-83, Software: Woodwop, Barcode: möglich, Working range X: 5600, Working range Y-axis: 1600, Working range Z: 250, C axis: yes, Pendulum processing: yes, Number of milling spindles vertical: 1, Tool adaption system: HSK 63, Milling engine 1 hours power: 12, rpm 1): 1500-18000, Number of tool changers: 1, Kettenwechsler: yes, Number of tools per tool-magazine: 70, Mitfahrender Werkzeugwechsler: yes, Vertical drills-X: 11, Drill vertical Y: 7, Number of tables: 8 Traversen, Traverse table: yes, 4 station allocation: yes, Stops in the table front: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 2 X 140, Saw unit: yes, Edgebanding unit: 360 Grad, Edgeband hight mm: 10-60, Magazine Qty: 6-fach, Radial arm machine: yes, incl. tools: yes, machine ready for demonstration: yes, Automatic setting up table: yes, CE-Sign:  ...

Manufacturer: Priess und Horstmann, Type: BAT-RTW-CNC, Year: 2003, Control: NST Panel PC W2k, Software: Ferro CAN Bus, Online connection: möglich, Machining stations: 4, Work piece width min-max mm: 130 - 600, Work piece length min-max mm: 290 - 1.300, Work piece thickness min-max mm: 16 - 25, 3 axis control: yes, Destacking unit: yes, Robot charging: yes, Beschickungsband: yes, Vertical drilling station from below: 2, Belt bores: yes, Drill and set buffer: yes, Grip holes: yes, Special bore area: yes, Automatic setting up: yes, Fitting station: yes, Transmission station: yes, Hordenwagen Aufstapelstation: yes, Automatic feed of the: yes, Line boring units pcs: 2, Line screw running units: yes, Year :2003

Manufacturer: HomagTürenfertigung mit mit Verleimteil und KUKA Roboter, Type: BOF / BAZ20/50/18/2/D, Year: 2002, Control: Homatic PC 83, Software: Woodwop, Work piece width min-max mm: 1600, Min.-max. workpiece length in mm: 800 - 3500, Min.-max. workpiece height in mm: 12 - 60/120, Working range X: 5800, Working range Y-axis: 1600, Working range Z: 160, C axis: 2, Work piece width min-max mm: 1600, Min.-max. workpiece length in mm: 800 - 3500, Min.-max. workpiece height in mm: 12 - 60/120, Number of milling spindles vertical: 2, Tool adaption system: HSK F63, Milling engine 1 hours power: 14,5, rpm 1): 1500 - 18.000, Milling engine 2 hours power: 14,5, rpm 2): 1500 - 18.000, Kettenwechsler: 70, Pickup Wechlser: 6, Number of tools per tool-magazine: 6 + 70+ 20, Mitfahrender Werkzeugwechsler: yes, Belt conveyor: yes, 2 station allocation: yes, Vacuum pumps m³/h: 2 x 66, Rigging support ...

Manufacturer: IMA H 610 Tandem, Type: BIMA 610/2H/875, Year: 1997, Software: IMAWOOP, Working range X: 5.700, Working range Y-axis: 1.900, Working range Z: 440, C axis: yes, Programming station office: möglich, Work piece width min-max mm: 150 - 1.200, Min.-max. workpiece length in mm: 250 - 5200, Min.-max. workpiece height in mm: 10 - 120, Pendulum processing: yes, Number of milling spindles: 2, Tool adaption system: HSK 63F, Milling engine 1 hours power: 7,5, rpm 1): 1.500 - 18.000, Milling engine 2 hours power: 7,5, rpm 2): 1.500 - 18.000, Vertical drills-X: 2 x 7, Drill vertical Y: 2 x 12, Traverse table: yes, 2 station allocation: yes, Vacuum pumps m³/h: 2 x 200, Saw unit: yes, Edgebanding unit: no, Radial arm machine: yes, Year :1997

Manufacturer: Priess und Horstmann, Type: BAT III-CNC-2, Year: 1996, Control: Priess und Horstmann, Program: yes, Function: Frontenbohrmaschine, Work piece width min-max mm: 100-600, Min.-max. workpiece length in mm: 100-1000, Min.-max. workpiece height in mm: 16-25, Destacking unit: 2, Einlaufrollengang: 2, Dowel driving station: 80, Milling spindles horizontal: Blum, Milling spindles vertical: yes, Fitting type: 21000, Schliesszylinder Bohrstationen: 2600, Schlosskastenfrässtationen: 60, Bänderbohrstationen: 2, Bänder Eindrehstation: 15, Hinges inserting unit: no, Dowel driving station: 3, Working range X: 2, Dowel driving station: 3, Working range Z: 1, Dowel driving station: 3, Drilling support horizontal: yes, Drill gearings: yes, Number of tables: yes, Year :1996

Manufacturer: Biesse, Type: Rover C6.50 Edge, Year: 2011, Control: Biesse, Software: Works, Work piece width min-max mm: 1.535, Min.-max. workpiece length in mm: 4.600, Min.-max. workpiece height in mm: 225, Working range X: 5.255, Working range Y-axis: 1.963, Working range Z: 350, Pendulum processing: yes, Work piece width min-max mm: 1.535, Min.-max. workpiece length in mm: 4.600, Min.-max. workpiece height in mm: 225, Number of milling spindles: 2, Tool adaption system: HSK F63, Milling engine 1 hours power: 12, Kettenwechsler: 22, Vertical drills-X: 12, Drill vertical Y: 17, Horizontal drills-X: 4, Drill horizontal Y: 2, 2 station allocation: yes, Vacuum pumps m³/h: 250, Saw unit: yes, Edgebanding unit: yes, Edgeband hight mm: 9 - 54, Radial arm machine: yes, Waste conveyor belt: yes, Zentralschnierung: yes, Year :2011

Manufacturer: Homag mit Verleimteil, Type: Optimat BOF / 40 / G , Year: 2000, Control: WoodWOP, Programmierplatz Büro: yes, Work piece width min-max mm: 1050/1200, Min.-max. workpiece length in mm: 4800, Min.-max. workpiece height in mm: 60/200, C axis: yes, Tool adaption system: HSK F63, Milling engine 1 hours power: 12, rpm 1): 1500 - 18000, Number of tool changers: 1, Number of tools per tool-magazine: 12, Mitfahrender Werkzeugwechsler: yes, Vertical drills-X: 11, Drill vertical Y: 7, Horizontal drills-X: 4, Aluminium sleeking table: yes, 2 station allocation: 2, Stops in the table front: 6 , Vacuum pumps m³/h: 120, Saw unit: yes, Edgebanding unit: no, Marking laser: Laserpositionerhilfe, Radial arm machine: yes, Foot mats: yes, Available: ca. 03/2017, Year :2000

Manufacturer: Morbidelli, Type: U 50, Year: 1991, Control: Num, Min.-max. workpiece length in mm: 150-3150, Min.-max. workpiece height in mm: 10-60, Working range X: 3150, Working range Y-axis: 1300, Working range Z: 60, C axis: no, Pendulum processing: yes, Min.-max. workpiece length in mm: 150-3150, Min.-max. workpiece height in mm: 10-60, Number of milling spindles vertical: 2, Tool adaption system: Schnellspansystem, Milling engine 1 hours power: ca.4,4, rpm 1): 12000/18000, Milling engine 2 hours power: ca.4,4, Number of tool changers: keine, Horizontal drills-X: 2, Drill horizontal Y: 2, Traverse table: yes, 2 station allocation: yes, Stops in the table front: 2 reihen, Vacuum pumps m³/h: 100, Saw unit: yes, Portal machine: yes, machine ready for demonstration: yes, Available: sofort, Year :1991

Manufacturer: Morbidelli, Type: Author 600, Year: 1999, Control: Num 1040/X-Log, Work piece width min-max mm: 1680, Min.-max. workpiece length in mm: 4400, Min.-max. workpiece height in mm: 10-80, Working range X: 4829, Working range Y-axis: 1774, Working range Z: 180(280), C axis: yes, Number of milling spindles: 1, Tool adaption system: ISO, Milling engine 1 hours power: 7,5, Number of tool changers: 2, Number of tools per tool-magazine: 4 + 8, Mitfahrender Werkzeugwechsler: yes, Vertical drills-X: 12, Drill vertical Y: 6, Horizontal drills-X: 4, Drill horizontal Y: 2, Traverse table: yes, 4 station allocation: 4, Stops in the table front: yes, Stops in the table rear: yes, Vacuum pumps m³/h: ca.60, Saw unit: schwenkbar, Radial arm machine: yes, Year :1999

Manufacturer: Vitap, Type: Point K2, Year: 2018, Barcode scanner: yes, Machining stations: 1050, Work piece width min-max mm: 1010, Work piece length min-max mm: unendlich, Work piece thickness min-max mm: 50, 3 axis control: yes, Working range X: 270 - unendlich, Working range Y-axis: 185 - 1200, Working range Z: 4 - 50, Vertical drilling station from below: 9, Milling spindles horizontal: 1 vertikal, Power kW 1: 5,0, RPM min-max 1: 12.000 - 24.000, Milling spindles vertical: yes, Horizontal drills-X: 2 + 2, Drill horizontal Y: 1 + 1, Sawing unit: 100 mm, Lochraster: 32, Machining stations: 1050, Year :2018

Manufacturer: Weeke, Type: BHC 600 Profiline, Year: 2003, Control: Weeke, Working range X: 9.000, Working range Y-axis: 1.790, Working range Z: 370, C axis: yes, Work piece width min-max mm: 1.300, Min.-max. workpiece length in mm: 7.250, Min.-max. workpiece height in mm: 100, Feeding speed max m/min: 80, Pendulum processing: yes, Number of milling spindles vertical: 1, Tool adaption system: HSK 63, Milling engine 1 hours power: 12, Number of tool changers: 2, Tellerwechseler: 2, Number of tools per tool-magazine: 8 + 18, Mitfahrender Werkzeugwechsler: yes, Vertical drills-X: 10, Drill vertical Y: 10, Horizontal drills-X: 3, Drill horizontal Y: 3, Number of tables: 2, Traverse table: yes, 2 station allocation: yes, Saw unit: yes, Laser positioning: yes, Year :2003

Manufacturer: Biesse, Type: Rover 6.50 5-Achsmaschine conf.2, Year: 2006, Software: Editor 2.2.1.273, Working range X: 4600, Working range Y-axis: 1535, Working range Z: 230, C axis: yes, B-axis: yes, Programming station office: möglich, Number of milling spindles: 1, Milling engine 1 hours power: 12, rpm 1): 1500-2400, Kettenwechsler: yes, Number of tools per tool-magazine: 14, Mitfahrender Werkzeugwechsler: yes, Traverse table: yes, 4 station allocation: yes, Stops in the table front: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 120, Rigging support table: yes, Tool clamping system: HSK-63 F, Saw unit: yes, Radial arm machine: yes, Werkstückspannsystem: Vakuum, Schnittstelle DXF: yes, machine ready for demonstration: yes, Zentralschnierung: yes, Presentation possible: yes, Year :2006

Manufacturer: Homag , Type: Genius 20/50/16/V/G, Year: 1998, Control: Homatic, Feeding speed max m/min: 80, Working range X: 5600, Working range Y-axis: 1600, Working range Z: 60/120, C axis: yes, B-axis: no, Tool adaption system: HSK F 63, Milling engine 1 hours power: 12, rpm 1): 1500 - 18000, Number of tool changers: 1, Number of tools per tool-magazine: 30, Vertical drills-X: 5, Drill vertical Y: 5, raster table: Glattisch, 2 station allocation: yes, 4 station allocation: yes, Stops in the table front: 14, Stops in the table rear: 3, Vacuum pumps m³/h: 66 + 100, Saw unit: yes, Edgebanding unit: yes, Edgeband hight mm: 40, Marking laser: yes, Year :1998

Manufacturer: Priess und Horstmann Frontenbohrautomat, Type: BAT III, Year: 1994, Control: Priess und Horstmann, Barcode scanner: yes, 3 Achsensteuerung: 3, Working range X: 2 X 1500, Work piece width min-max mm: 190 - 600, Work piece length min-max mm: 100 - 1500, Work piece thickness min-max mm: 10 - 60, Automatic setting up: yes, Drilling supprt from bottom: 7 Spindeln, Drill support from top: yes, Number of milling spindles: 1 , Power kW 2: 2,2, RPM min-max 2: 18000, Sawing unit: 1,6 kW, Line screw running units: yes, Feeding speed max m/min: 60/80/10, Pneumatic clamping: yes, Cycle rate: 400, machine ready for demonstration: yes, FREE TEXT: Maschine ist für Hettich Beschlag/Puffersetzautomat , Year :1994

Manufacturer: Weeke, Type: Optimat BP 145, Year: 2001, Control: Homatic 2000 IPC, Software: Woodworp, Working range X: 3250, Working range Y-axis: 1300, Working range Z: 100, C axis: yes, Feeding speed max m/min: 80/60/20, Pendulum processing: yes, Number of milling spindles: 1, Tool adaption system: HSK63F Kegel, Milling engine 1 hours power: 9, rpm 1): 1250-24000 FU geregelt, rpm 2): t, Number of tool changers: 1, Tellerwechseler: yes, Number of tools per tool-magazine: 8, Mitfahrender Werkzeugwechsler: yes, Horizontal drills-X: 4, Drill horizontal Y: 2, Traverse table: yes, Stops in the table front: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 100, Drill vertical: 22, Saw unit: yes, FREE TEXT: 2x Freiplätze für zum Nachrüsten vorbereitet, Year :2001

Manufacturer: Reichenbacher, Year: 2011, Control: Siemens Sinumerik 840 D Solution Line mit NCU 720.2, Software: Frame-Concept, Work piece width min-max mm: 300-1500, Min.-max. workpiece length in mm: 2 X 2200 oder 1 X 4000 X 1600, Min.-max. workpiece height in mm: 10-120, Work piece width min-max mm: 300-1500, Min.-max. workpiece length in mm: 2 X 2200 oder 1 X 4000 X 1600, Number of milling spindles: 2 X 5 Achs, Tool adaption system: HSK 63, Milling engine 1 hours power: 18, rpm 1): 1000-24000, Kettenwechsler: yes, Number of tables: 2, Traverse table: yes, 2 station allocation: yes, Stops in the table front: yes, Vacuum pumps m³/h: 250, Portal machine: yes, Automatic setting up table: yes, Charging system double-sided: Roboter, Destacking unit: mit Lagerplätzen, Automatic charging: Roboter auf Fahrportal, Presentation possible: yes, FREE TEXT: Bohr undBänder Eindrehstation, Year :20 ...

Manufacturer: Morbidelli, Type: 503, Year: 1998, Control: Tria 7000, Feeding speed max m/min: 75, Working range X: 3200, Working range Y-axis: 1050, Working range Z: 80, C axis: yes, Number of milling spindles: 1, Tool adaption system: ISO 30, Milling engine 1 hours power: 7,5, rpm 1): 18000, Number of tool changers: 1, Number of tools per tool-magazine: 8, Vertical drills-X: 11, Drill vertical Y: 7, Horizontal drills-X: 4, Drill horizontal Y: 2, Traverse table: yes, 4 station allocation: yes, Stops in the table front: yes, Stops in the table rear: 4, Vacuum pumps m³/h: 120, Tool clamping system: ISO 30, Saw unit: Starr in X Richtung, Radial arm machine: yes, Year :1998

Manufacturer: Biesse Rover A, Type: Rover A, Year: 2008, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 145-3685, Min.-max. workpiece height in mm: 6-80, C axis: yes, Number of milling spindles: 1, Milling engine 1 hours power: 12, U/min 1): 1500-24000, Number of tool changers: 1, Number of tools per tool-magazine: 18, Vertical drills-X: 7, Drill vertical Y: 8, Horizontal drills-X: 4, Drill horizontal Y: 2, raster table: yes, 2 Platzbelegung: yes, Anschläge im Tisch vorne: yes, Vacuum pumps m³/h: 250, Tool clamping system: HSK F 63, Drill vertical: 15, Saw unit: yes, Year :2008