autres machines alimentaires machines d'occasion à vendre (1,044)

Printing pad, printing pad for pad printing machine-Manufacturer: Teca-Print, printing pad for pad printing machine-Type: 597 Ø 165 mm-Receptacle: M16-Quantity: 3x printing pads available-Price per piece-Total dimensions: Ø 165 x 150 mm-Weight: 1.7kg/piece

Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter, compact filter, suspended matter filter-Air filter: stainless steel housing-Number: 2x air filters available-Price: per piece-Dimensions: 610/100/H305 mm-Weight: 7.2 kg/piece

Clean Air System AOP Desktop, type DT 500 DeskAir PHI, Pour votre lieu de travail, que ce soit au bureau ou à domicile, purifie l’air et améliore le climat intérieur., - Longueur du tube UV-C : 5 mais a la, - puissance de 2,5, - Débit du ventilateur intégré :, - sans ventilateur, - Tension : 230 V avec convertisseur de tension, - (intégré dans le bureau) et prise 12 V, - Alimentation : 12 volts 1 ampère, - Matériau du boîtier : polymère, -, puissance : Volume de la pièce / capacité : 74 m³ en 24 h, Dimensions / poids : Dimensions L x l x H : 152 x 76 x 300 mm, poids : 1 kg

Tetra Pak desserts pilot UHT plant with an pasteurisation, indirect and/or direct (VTIS) heating module @ 225 ltr/h and only a pasteurisation step @ 125 ltr/h, previously used in a R&D centre for desserts., Indirect unit, skid mounted, including:, - Open level tank, serial number: DFB-5259-BT01, year 2008, 50 ltr with propellor agitator (Lightnin ECL-M59-25)., - Feed pump (mono / screw pump, Netzsch, NM031BH02S12H, serial number 387231, year 2007, 120 - 300 ltr/h, speed 20 - 80 rpm, discharge pressure 2 bar, product temperature 5 - 20 °C)., - Lobe pump, Alfa Laval, SRU1/005/LD, serial number 431441, year 2008, motor: 0,37 kW, 400 V, 50 Hz, n1: 1.360 rpm, i: 15,57 n2: 89 rpm., - Heating module A, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17997., - Heating module B, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17999., - Heating module C, centrifugal pump: Al ...

5x disques neufs pour un séparateur / écumeur Alfa Laval 518 HGV. Référence de Tetra Pak : 6-54174180, Disque de bol, Type de machine : Disque de bol, Nombre de pièces : 5x, État : Jamais utilisé, Référence de Tetra Pak : 6-54174180

Séparateur d’élimination des bactéries (Bactofuge). Autonettoyant. La machine est livrée avec le bol, le moteur (22 kW), le couvercle du moteur, le châssis avec pieds, les manomètres, la soupape de contre-pression, la soupape de régulation de débit, les vannes d’eau, le réservoir de boues et les outils de service pour l’entretien, y compris l’outil de pressage., Caractéristiques supplémentaires :, Non inclus :, - Panneau de commande., Type de machine : Centrifugeuse antibactérienne (Bactofuge), Capacité : 15.000 litres par heure, Vitesse du bol : 4.500 tr/min, Moteur : 22 kW - 380 V - 42,5 A - 1.460 tr/min - 50 Hz - 3 Ph

This Karl Schnell creaming tank is a part of a production line for processed cheese spreads. During the heating process the product has become very thin and this tank serves for controlled viscosity increase, in order to achieve optimum spreading characteristics. Stainless steel execution. Double jacketed. Total volume: 785 liter, effective volume: 650 liter. Inlet height: 2.200 mm. The specially designed, frequency-controlled, Teflon-coated scraper agitator that goes along the wall, gives the cheese the ideal spreadable consistency, motor: 2,2 kW - n1 1.410 - n2: 9,9 / 49 rpm. Manhole on top. CIP spraybowls. Conical bottom with pressure transmitter and outfeed (DN65) in the center. Outlet height: 450 mm. 3 legs with feet. Control panel. Manuals available. Total dimensions: 180 x 200 x 235 cm. Total weight: ± 650 kg., This Creaming tank Karl Schnell 215 was running together in the dairy ...

This GEA Niro Soavi NS3037H homogeniser is a 3-cylinder machine which is designed for 6.000 liter per hour with a maximum pressure of 100 bar. The homogensier is equipped with 1-stage with puppet valve cylinder. Manometer. Overpressure valve. Motor: 30 kW - 400 V - 53,37 Amp - 50 Hz - 1.470 rpm. Oil pumping system inside the machine. Stainless steel cladded., Additional features:, Excluding:, - Main control panel., Type of Machine: Homogeniser, Capacity: 6.000 liter per hour, Stages: 1 stage, Max. Pressure: 100 bar, Valve cylinder: Puppet valves, Piston diameter: 70 mm, Motor: 30 kW - 400 V - 53,37 Amp - 50 Hz - 1.470 rpm, Dimensions: 230 x 150 x 152 cm, Weight: 1.960 kg

Séparateur de crème (Skimmer). Autonettoyant. La machine est livrée avec le bol, le moteur (22kW), le couvercle du moteur, la plaque de base, les pieds, les vannes d’eau (d’origine Westfalia) et les tuyaux d’entrée/sortie., Caractéristiques supplémentaires :, Non inclus :, - Vanne CPM pour la régulation de la pression., - Panneau de commande., - Outils de service pour la maintenance., Type de machine : Séparateur de crème / Écumoire, Capacité : 20.000 litres par heure, Vitesse du bol : 4.500 tr/min, Moteur : 22 kW - 380 V - 42,5 A - 1.460 tr/min - 50 Hz - 3 Ph, Poids : ± 2.300 kg, Dimensions : ± 190 x 112 x 220 cm

Petite roue dentée inutilisée pour un séparateur d’écrémage Westfalia MSB 130-01-076. Numéro d’article : 3170 3423 010. Nom allemand : Schnecke. Pour une machine entraînée à 50 Hz., Type de machine : Petite roue dentée, Transmission : 50 Hz, État : Jamais utilisé

Arbre principal inutilisé pour un séparateur Westfalia. Numéro d’article : 2231 3400 020., Type de machine : Arbre principal, Chaîne cinématique : 50 Hz, État : Jamais utilisé

Tetra Pak automatic direct standardisation unit which is designed to handle skimming of whole milk and standardisation of cream or standardisation of both cream and milk. Skid mounted unit including PD340 Magnetic flow transmitter for standardised milk, PD340 Magnetic flow transmitter for cream remixing, PD340 Magnetic flow transmitter for standardised cream, density transmitters, valves, some interconnecting piping and a control panel with recorder of fat content, display for flowtransmitter and Alfa Laval Alfast Operator Panel. Previously used in combination with an Alfa Laval HMRPX 714 HGV-74C milk skimmer separator (20.000 liter per hour)., Additional features:, Some clamps for connection / piping are missing., Type of Machine: Standardisation unit for milk, Capacity: 20.000 ltr/h, Weight: ± 500 kg, Dimensions: ± 120 x 120 x 220 cm

The Scanima SFM-200 is a simple mixing solution with a compact design at a lower cost for higher capacity production. The powder dissolver secure efficient mixing of liquids, including emulsification. It is also ideal for mixing concentrates and minerals into base concentrates and slurries, for example oils into non fat milk concentrates. The mixers can handle products up to 300 cP. The main product is pumped through the mixer. Additives are pumped into the main stream by the inlet pipe. Mixing then takes place and the blended product passes through the turbo unit for final mixing before it goes to the outfeed. Motor power: 15 kW. Input pressure: - 0,8 / + 1,0 Bar. Input temperature: 0 / + 120 °C. Output pressure: -0 / + 2,0 Bar. Output temperature: 0 / + 120 °C., Additional features:, Excluding:, - Hopper, Type of Machine: Powder dissolver, Capacity: up to 25.000 ltr/h depending on pr ...

Cream separator (Skimmer) for separation of milk or whey. Self cleaning. Machine comes with the bowl, motor (45 kW), motor cover, cyclone sludge tank, base plate, feet, watervalves (original Westfalia), main control cabinet with frequency converter (ABB) and control panel with Allen-Bradley SLC 5/03 CPU Processor and Allen Bradley PanelView 1000. Controls upgraded in 2008 by GEA Westfalia. Endress + Hausser Promass 83 Flowmeter. Service tools for maintenance including pressing tool., Type of Machine: Cream Separator, Capacity: 35.000 liter per hour, Bowl speed: 4.800 rpm, Motor: 45 kW - 460 V - 74 A - 1.775 rpm - 60 Hz - 3 Ph, Weight: 3.300 kg, Dimensions: 210 x 125 x 235 cm

This APV Gaulin 159 MC4-5TBS homogeniser is a 3-cylinder machine which is designed for 300 / 600 liter per hour with a maximum pressure of 250 bar. The homogensier is equipped with 1-stage with ball valve cylinder, manual controlled. Manometer. Overpressure valve. Motor: 7,5 kW - 380 V - 16 Amp - 50 Hz - 1.440 rpm. Oil pumping system inside the machine. Stainless steel cladded. Including simple free standing control panel., Type of Machine: Homogeniser, Capacity: 300 / 600 liter per hour, Stages: 1 Stage, Max. Pressure: 250 bar, Valve cylinder: Ball valves, Product: Cream / Cream cheese, Piston diameter: 24 mm, Motor: 7,5 kW - 380 V - 16 Amp - 50 Hz - 1.440 rpm, Dimensions: 120 x 80 x 165 cm, Weight: 800 kg

On behalf of our client, we are requested to offer this Cheddar Cheese Plant for sale, because of bankrupcy of the previous owner. The whole line is delivered and built up in 2021 and has been in production for 1,5 years only., The line is already dismantled and packed for transport. It can still be inspected on the actual factory site in the warehouse., The capacity of the cheddar cheese plant was during production of the previous owner set at a milk intake of 50.000 pounds per hour, 20 hours per day = 1.000.000 pounds of milk per day, which means ± 100.000 pounds of cheddar cheese per day (= ± 45.359 kg of Cheddar cheese per day) = ± 2.500 Cheddar cheese blocks of 40 pounds per day (= ± 18,14 kg). Dimensions of the cheddar blocks: 35 x 28 x height cm., The available list of equipment exist out of:, - 4x Closed cheesevats, Manufacturer: Walker (supplied by Kusel), Model: Double O, V ...

Single jacketed tank with an propellor agitator. Volume: liter. Motor of the propellor agitator: 0,18 kW - 380 V - 50 Hz - 420 rpm. Stainless cover of the motor. Manhole with breather on top. Level indicator in top. Spraybowl for CIP cleaning. 3 legs. Inlet from the side. Outlet in the bottom center. Internal diameter 46 cm, internal height 72 cm. Total dimensions: 48 x 48 x 150 cm., Type of Machine: Process tank, Volume: 120 liter, Double jacketed: No, Insulation: No, Type of agitator: From the top, out of hte center, placed propellor agitator, Motor of agitator: 0,18 kW, CIP Spray bowls: Yes, Manhole: Yes, Number of feet: 3, High / Low Level sensors: Yes, Internal diameter: 46 cm, Internal height: 72 cm, Total outside diameter: Ø 50 cm, Total outside height: 150 cm, Weight: 60 kg

This APV Gaulin MC18-5TPS homogeniser is a 3-cylinder machine which is designed for maximum 5.500 liter per hour with a maximum pressure of 345 bar. This machine, based on the motor power and the piston diameter is set on 4.800 liter per hour with a maximum pressure of 345 bar. The homogensier is equipped with 2-stages, hydraulich controlled. Piston diameter 45 mm. Manometer. Motor: 55 kW - 380 V - 99 Amp - 50 Hz - 1.470 rpm, forced cooling on the motor (for running at lower capacities). Oil pumping system inside the machine. Stainless steel cladded., Additional features:, No typeshield on the machine, so unknown serial number and year of manufacturing. Model and capacity based on piston diameter and motor power., Excluding:, - Pulsation dempers, - Control panel, Type of Machine: Homogeniser, Capacity: 4.800 liter per hour, Stages: 2 stages, Max. Pressure: 345 bar, Valve cylinder: Poppet ...

Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (18,5 kW), motor cover, cyclone, feet, water valves (original Westfalia), control panel (original Westfalia), all inlet/outlet pipes with flow indicators, all service tools for maintenance including pressing tool and a big set of spare parts. Instruction manual available., Additional features:, Excluding:, - Baseplate., Type of Machine: Cream Separator / Skimmer, Capacity: 12.000 liter per hour, Bowl speed: 4.500 rpm, Motor: 18,5 kW - 380 V - 50 Hz - 1.465 rpm - 38 A , Dimensions: 185 x 150 x 147 cm, Weight: 2.020 kg

This skid mounted pilot pasteurisation plant exisiting out of a inline filter, feed screw pump (Bominox - type RS-22/M - 0,75 kW - n2: 250 rpm), level tank with mix agitator (0,18 kW - 665 rpm), pre-heater (tubular heatexchanger), homogeniser (FBF 001), 2x tubular heaters, holding, 2 tubular coolers and a double jacketed ripening tank with propellor agitator (0,37 kW - n2: 50 rpm). The pilot pasteurisation plant is previously used for ice cream mixture and only run for 357 production hours., The unit can be used for all kind of different combinations for pasteurisation and homogenising of liquid products, by making different connections on the flowplates., Homogeniser details:, Manufacturer: FBF Italia, Model: FBF 001, Serienr: 06031808, Year: 2006, Max. capacity: 215 ltr/h, Pressure: 250 / 50 bar, Number of stages: 2, Motor: 2,2 kW - 400 V - 50 Hz - 1.420 rpm, Including all interconnect ...

5x disques pour un séparateur / écumeur Alfa Laval 618., Type de machine : Disque de bol, Nombre de pièces : 5x, État : Utilisé

Séparateur d’élimination des bactéries (Bactofuge). Autonettoyant. La machine est livrée avec le bol, le moteur (22 kW), le cyclone de vidange, la plaque de base, les pieds, la vanne CPM pour la régulation de la pression, le panneau de commande (Alfa Laval d’origine) et la boîte à eau (Alfa Laval d’origine)., Caractéristiques supplémentaires : Non compris :, - Outils de service pour la maintenance., Capacité 10.000 - 15.000 litres par heure., Type de machine : Bactofuge (centrifugeuse d’élimination des bactéries), Capacité : 15.000 litres par heure, Vitesse du bol : 5.069 tr/min, Moteur : 22 kW

Cette cuve de crémage fait partie d’une ligne de production de fromages fondus à tartiner stérilisés. Ils servent à une augmentation contrôlée de la viscosité après le processus de stérilisation, afin d’obtenir des caractéristiques d’étalement optimales. Volume max : 500 litres, volume effectif : ± 400 litres. Agitateur à racler qui longe le mur, Moteur de 1,5 kW., Type de machine : Réservoir de crémage, Volume : 500 litres, Diamètre intérieur : 80 cm, Hauteur intérieure : 100 cm, Type d’agitateur : Agitateur à racler qui longe le mur, Moteur de l’agitateur : 2,2 kW - 220/380 V - 50 Hz

APV Crepaco Liquiverter / liquifier for dissolving and dispersing any dairy and food product. This unit is designed to mix, disperse, dissolve, suspend or hydrate solids and liquids or oils and fats with liquids. Volume of the tank: ± 750 liter. Motor (18,5 kW - 1.470 rpm) with motorcover on the top with direct connected 1:1 right-angle drive for controlling the high speed impellor in the bottom, which is creating a strong Vortex which reduces cycle times to a matter of minutes. Stainless steel construction with 4x legs. Round manhole on the top. 2x spray balls for CIP cleaning. Oufeed on the side with a manual butterfly valve. Inside dimensions: 95 x 95 x 80 cm. Stainless steel control panel with start/stop button and a Solcon RVS-AX reduced voltage starter., Type of Machine: Powder dissolver, Volume: ± 750 liter, Capacity: up to 15.000 ltr per hour, depending on product and system la ...

Bacterial removing separator (Bactofuge) with nozzles. Self cleaning. Machine comes with the bowl, motor (45 kW), motor cover, new base plate, feet, desludge cyclone, OWM watervalve and service tools for maintenance including pressing tool.  , This Bactofuge is already convertered to a rubber damped silent gear drive!, Additional features:, Excluding:, - Control panel., Type of Machine: Bactofuge (Bacterial-Removing Centrifuge), Capacity: 13.000 liter per hour, Bowl speed: 4.150 rpm, Motor: 45 kW - 1.465 rpm - 400 V - 50 Hz - 84,5 A, Weight: 2.700 kg, Dimensions: 165 x 135 x 190 cm

Serviced Continuous Butter Making Machine - CBM with a new control panel with simple controls. Output of 800 kg butter per hour sweet butter and 600 kg butter per hour cultured butter. Input of ± 1.600 liter of cultured or / and sweet cream per hour (35/42% fat, pH of ± 4,8 and infeed temperature ± 8 - 13 °C). Complete electric driven. Churning motor: 15 kW. Screw conveyor (kneading) motor: 5 kW. Butter milk pump: 3 kW. Feed pump: 3 kW. Vacuum pump: 1,5 kW. New control panel with simple controls with cream inlet temperature indictator, wash water inlet temperature indicator, output temperature indicator, emergency stop, main switch and all on/off buttons for the pumps., Type of Machine: Continuous Butter Making Machine (CBM), Capacity: 600 - 800 kg butter per hour (output), Motors: Churning: 15 kW and Kneading: 5 kW - 415 V - 50 Hz, Year of Major Service: 2024, Operating Hours: 0 h s ...

Bactofuge (Bacterial removing separator). Self cleaning. Machine comes with the bowl, motor (37 kW), motor cover, baseframe with feet, manometer on in / outlet, control panel (upgraded by Centrimax with Siemens S7 PLC and CE labelling) and several service tools for maintenance. It was working till the end of the production of the former dairy., Additional features:, Excluding:, - Water valves., - Sludge tank / cyclone., - Counter pressure valve., Type of Machine: Bacterial-Removing Centrifuge (Bactofuge), Capacity: 25.000 liter per hour, Bowl speed: 4.700 rpm, Motor: 37 kW

Séparateur de crème (Skimmer). Autonettoyant. La machine est livrée avec le bol, le moteur (11 kW), la plaque de base, les pieds, le panneau de commande, les vannes d’eau, les tuyaux d’entrée et de sortie et les outils de service pour l’entretien., Caractéristiques supplémentaires :, Non inclus :, - Couvercle du moteur., Type de machine : Séparateur de crème / Écumoire, Capacité : 5.000 - 7.000 litres par heure, Vitesse du bol : 6.520 tr/min, Moteur : 11 kW - 380 V - 50 Hz - 1460 tr/min, Poids : ± 1.300 kg

Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...

Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...