presses machines d'occasion à vendre (1,634)

pressure: 150 tchamfer lenght: 2500 mmdistance between columns: 2100 mmcolumn arm: 250 mmdayligth: 325 mmControl: ATL 550 weight: 7700 kgrange L-W-H: 4000 x 1800 x 2400 mmEquipment:- ATL 550 control unit- FIESSLER laser protection- Electric back gauge ( X )- Positioning of the depth adjustment ( Y1 Y2 )- 2 stop fingers, manually adjustable- Rear side guard- Upper and lower toolThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 tthroat: 400 mmstroke: 400 mmdayligth: 600 mmtable surface area: 1000 x 600 mmControl: Siemens S7 hole in the table: 0 mmtable height over floor: mmram surface: 1000 x 600 mmworking feed: 5 - 15 mm/secspeed down: 130 mm/sekspeed up: 180 mm/sekpower requirement: 18 kWweight of the machine ca.: 12,0 tdimensions: 2,4 x 1,9 x 3,5 mSingle-column press with- Hardened and chrome-plated cylinder- Main cylinder diameter 270 mm- Auxiliary cylinder diameter 70 mm- Bosch Rextroth pump, valves, and filters- Hydraulic overload valve- Hydraulic proportional valve- Siemens touchscreen control panel with remote maintenance access Settings for stroke, pressure, speed, and dwell time- Category 4 sensors and photoelectric sensor- Two-hand control panel with reset and emergency stop buttons- CE markingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 330 tchamfer lenght: 6100 mmdistance between columns: 5600 mmControl: Cybelec VisiTouch 24 stroke: 300 mmdayligth: 500 mm: 160 mm/sbending speed: 0-9 mm/stotal power requirement: 32 kWweight of the machine ca.: 36.000 kgdimensions: 6970 x 2300 x 4150 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 180 tchamfer lenght: 3100 mmdistance between columns: 3600 mmControl: Cybelec CybTouch 15 stroke: 250 mmdayligth: 470 mm: 180 mm/sbending speed: 0-10 mm/s: 165 mm/stotal power requirement: 15 kWweight of the machine ca.: 12.500 kgdimensions: 4000 x 2000 x 3030 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 250 tchamfer lenght: 3550 mmdistance between columns: 3000 mmControl: Cybelelc DNC 1200 total power requirement: kWweight of the machine ca.: 18.500 kgdimensions of the machine ca.: 4300x2750x3750 mmAccessories:- 2-hand foot switch- Lasersafe Fisseler- Hydraulic tool clamping at top and bottom- Die shift- Hydraulic crowning- Support arms- Cybelec DNC 1200 control- 1 set of upper and lower tools- Controlled axes y1, y2, x, r, z1, z2, inclined stop- Protective grilleThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 180 tchamfer lenght: 3100 mmdistance between columns: 3600 mmControl: Cybelec CybTouch 15 stroke: 250 mmdayligth: 470 mm: 180 mm/sbending speed: 0-10 mm/s: 165 mm/stotal power requirement: 15 kWweight of the machine ca.: 12.500 kgdimensions: 4000 x 2000 x 3030 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 225 tchamfer lenght: 2050 mmdistance between columns: 1550 mmcontrol: CYBELEC DNC 1200 PS Eco stroke: 550 mmtable height: 700 mmthroat: 405 mmdistance between table / ram: 320-870 mmcolumn arm: 405 mmweight of the machine ca.: 14.000 kgAccessories / equipment:- controlled axes: Y1 - Y2 - X - R- Z1 and Z2 can be moved manually- Lasersafe angle measurement- Pneumatically adjustable support table- pneumatic upper and lower tool clamping- 2-hand foot control- manual crowningThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 tchamfer lenght: 3000 mmdistance between columns: 3100 mmControl: Delem DA 66S stroke: 300 mmdayligth: 500 mm: 200 mm/sbending speed: 0-12 mm/stotal power requirement: 15 kWweight of the machine ca.: 10.000 kgdimensions: 4080 x 3110 x 1800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 tchamfer lenght: 3000 mmdistance between columns: 3100 mmControl: Cybelec VisiTouch 24 stroke: 300 mmdayligth: 500 mm: 200 mm/sbending speed: 0-12 mm/stotal power requirement: 15 kWweight of the machine ca.: 11.500 kgdimensions: 4080 x 3110 x 1800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 330 tchamfer lenght: 3100 mmdistance between columns: 2600 mmControl: Cybelec VisiTouch 24 throat: 500 mmdayligth: 500 mmstroke: 300 mm: 165 mm/sbending speed: 0 - 10 mm/stotal power requirement: 32 kWweight of the machine ca.: 18.500 kgdimensions: 3900 x 1970 x 3520 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tchamfer lenght: 3100 mmcontrol: CybTouch 15 Windows stroke: 215 mmsafety distance: 350 mmpressing speed: 1-10 mm/seccolumn daylight: 3250 mmcompressed air: max. 8 barclosing speed: 200 mm/stotal power requirement: 7,5 kWweight of the machine ca.: 8.000 kgrange L-W-H: 3450x2000x2800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 330 tchamfer lenght: 4100 mmdistance between columns: 3600 mmControl: Cybelec VisiTouch 24 stroke: 300 mmArm length: 500 mmdayligth: 500 mm: 165 mm/sbending speed: 0 - 10 mm/stotal power requirement: 32 kWweight of the machine ca.: 21.000 kgdimensions: 4850 x 2300 x 3520 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 2000 tdistance between columns: - mmstroke: 140 mmstrokes per minute: 15-50 H/mintable surface area: 1000 x 1100 mmdimension of ram: - mmweight of tools max.: - kgShut Height: 650 mmdistance table - lower edge of ram: - mmram adjustment: 25 mmmain drive: 30 kWtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mmProduction of stamped and formed parts, mechanical drive with toggle lever driveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 220 tchamfer lenght: 4100 mmdistance between columns: 3600 mmControl: Cybelec CybTouch 12 throat: 400 mmstroke: 220 mmdayligth: 480 mm: 140 mm/sbending speed: 0-10 mm/s: 110 mm/stotal power requirement: 18,5 kWdimensions: 4500x2000x2900 mmweight: 13.000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 tchamfer lenght: 3050 mmdistance between columns: 2550 mmstroke of upper beam: 175 mmdayligth: 240 mmthroat: 350 mmworking feed: 9.0 mm/secreturn speed: 86.0 mm/secwork height max.: ca. 920 mmControl: ERD 110 M oil volume: 150 ltotal power requirement: 15.0 kWweight: 9300 kgrange L-W-H: 4250 x 2170 x 2800 mmFeatures:- NC electro-hydraulic press brakes- with DURMA NC control ERD 110M Illuminated LCD display X-axis control & value display Y-axis control & value display- Swiveling operator panel, front left- NC controlled axes: Y1/Y2 + X- NC electro-motorized backgauge (X-axis) with 2x manually adjustable stop fingers including lateral and height adjustment (Z+R axes)- NC electro-motorized depth adjustment (Y-axis)- Manual bending table crowning Adjustment via hand crank with analog value display- AMADA/PROMECAM upper tool holder with upper wedge crowning & quick-change adapte ...

pressure: ca. 5 tdayligth: 110 mmthroat: 40 mmweight of the machine ca.: ca. 50 kgdimensions of the machine ca.: 1,2 x 0,5 x 1,3 mFunction: ready for operation: 6 t (estimaeted) hand-operated spindle press. The machine is professionally and durably lashed.Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pression : 200 Longueur de la table : 1600 mm Largeur de la table : 1300 mm Lumière : 1800 mm Contrôle : Simatic Capacité de retour de la RAM : 6000 kg Capacité de charge table : 7000 kmPuissance totale requise : ? Environ 25-30 kWweight de la machine environ : 19 t-dimensions de la machine environ : 2,95 5 6 m Prix spécial 49 900 EUR depuis la fondation jusqu’au 30 janvier 2026. Prix normal de l’entrepôt. Les données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.

pressure: 150 tstroke: 300 mmtable surface area: 1070 x 290 mmcolumn travel between the guideways: 1070 mmajustment speed: 9.0 mm/secworking feed: 5.0 mm/secreturn speed: 10.0 mm/secengine output: 11.0 kWweight of the machine ca.: 2070 kg.range L-W-H: 2200 x 1200 x 2550 mm Display machine from 2023 With only approximately 2 operating hours Like new condition Special price upon requestFurnishing:- Robust electro-hydraulic workshop press, with adjustable cylinder- Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more.- Robust welded steel construction for high demands- Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket- 1x set of V-block prism supports- Manometer for pressure display- simply constructed hand control with: 1x delivery speed 1x working speed 1x re ...

pressure: 30.0 tstroke: 200 mmtable surface area: 775 x 190 mmcolumn travel between the guideways: 775 mmajustment speed: 7.5 mm/secworking feed: 5.0 mm/secreturn speed: 10.0 mm/secengine output: 3.0 kWweight of the machine ca.: 400 kg.dimensions of the machine ca.: 1.500 x 700 x 1.800 mmFeatures:- Robust electro-hydraulic workshop press with fixed cylinder- Ideal for aligning axles, shafts, etc.,. but also for pressing in and out bolts, bearings, bushings, and much more.- Robust welded steel construction for heavy-duty use- Table height adjustment via piston rod Includes round steel chain and 2 locking pins Piston rod with metric mount- 1 set of V-block prism supports- Pressure gauge for pressure display- Simple manual control with: 1 feed speed 1 working speed 1 retraction speed- Piston can be stopped in any position- Fixed hydraulic tank mounted on the side- Operating instructionsThe  ...

pressure: 60.0 tstroke: 250 mmtable surface area: 1040 x 370 (315) mmcolumn travel between the guideways: 1040 mmajustment speed: 8.0 mm/secworking feed: 4.0 mm/secreturn speed: 10.0 mm/secengine output: 4.0 kWweight of the machine ca.: 800 kg.dimensions of the machine ca.: 1.700 x 700 x 2.100 mmFeatures:- Robust electro-hydraulic workshop press with fixed cylinder- Ideal for aligning axles, shafts, etc.,but also for pressing in and out bolts, bearings, bushings, and much more.- Robust welded steel construction for heavy-duty use- Table height adjustment via piston rod Includes round steel chain and 2 locking pins Piston rod with metric mount- 1 set of V-block prism supports- Pressure gauge for pressure display- Simple manual control with: 1 feed speed 1 working speed 1 retraction speed- Piston can be stopped in any position- Fixed hydraulic tank mounted on the side- Operating instructio ...

pressure: 100 tstroke: 300 mmtable surface area: 1070 x 315 mmcolumn travel between the guideways: 1070 mmajustment speed: 8.0 mm/secworking feed: 5.0 mm/secreturn speed: 10.0 mm/secoil volume: 90.0 lengine output: 5.5 kWweight of the machine ca.: 1870 kg.dimensions of the machine ca.: 2050 x 1000 x 2200 mmFurnishing:- Robust electro-hydraulic workshop press, with adjustable cylinder- Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more.- Robust welded steel construction for high demands- Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket- 1x set of V-block prism supports- Manometer for pressure display- simply constructed hand control with: 1x delivery speed 1x working speed 1x retreat speed- Piston can be stopped in any position- Hydraulic tank mounted on t ...

chamfer lenght: 0900 mmplate thickness: mmdistance between columns: 900 mmpressure: 20 tcolumn arm: 230 mmstroke length max.: 150 mmtravel -x axis: 350 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 120000 €: 2268 €: 300 to: 500 mm: 1000x500 mm: 1200x800 mm: 600 mm: 400 mm: 22 mm/s: 2 mm/s: 7.5 kW: 2300 mm: 1500 mm: 3100 mm: 11200 kg4-fold round guidancetable and ram with T-slots2 hand operationSiemens PLCmanometerusers manual Light barrier € on Request Siemens control for programming of stroke and press time € on RequestSiemens touchscreen-control, 50 programsstoreable, for programming:• Upstroke and downstroke quota• Break time in the bottom• time of Decompression• setting pressure of work• Pieces counter• prestop in upstroke and downstroke• setting for movement in manual and in automatic• management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Deompression valve € on Request Oil cooler with decompreission valve € on Request Pressure switch € on R ...

pressure: 120 tchamfer lenght: 3050 mmdistance between columns: 2550 mmstroke of upper beam: 155 mmthroat: 350 mmajustment speed: 100 mm/secworking feed: 9.0 mm/secreturn speed: 77.0 mm/secControl: P 40 work height max.: 878 mmtable width: 104 mmoil volume: 150 ltotal power requirement: 11.0 kWweight: 7550 kgrange L-W-H: 3550 x 2150 x 2600 mmEquipment:- NC electro-hydraulic press brakes- with NEW ELGO NC control unit P40 New price approx. 4.000 Euro Control / movement of the backgauge - X axis (target/actual input) Control / movement of the depth setting - Y axes (target/actual input) Inching mode for X axis Y axes also possible- Swivel operation, front left- NC controlled axes : Y1 Y2 X- NC electro-motorized backgauge (X axis) with 2x manually adjustable stop fingers including lateral and height adjustment (Z R axis)- 1x branded set of upper tools (split)- 1x branded Multi-V bottom die  ...

pressure: 180 tchamfer lenght: 3100 mmdistance between columns: 2550 mmthroat: 310 mmstroke: 200 mmajustment speed: 80.0 mm/secworking feed: 10.0 mm/secreturn speed: 58.0 mm/secdayligth: 385 mmtable width: 240 mmwork height max.: 885 / 1050 mmoil volume: 180 ltr.total power requirement: 15.0 kWweight of the machine ca.: 9850 kg.range L-W-H: 4200 x 1750 x 2450 mm from a maintenance workshop well-maintained condition ()- in checked condition - machine video -https://www.youtube.com/watch?v=o_t9BBMsNNsEquipment:- simple, conventional electro-hydraulic press brake with torsion shaft for parallelism of the upper beam- electric back stop, with ball screws (X axis) with 4x manually adjustable stop fingers fine adjustment via handwheel at the front, with analog position display- electro-motor adjustment of the immersion depth (Y1 + Y2 axis) with digital position display- swiveling operation, mou ...

Longueur du chanfrein : 650 mm Épaisseur de la plaque : -1,6 mm Poids de la machine environ : 150 kg Dimensions de la machine environ : 2000 x 1000 x 900 mm Les données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.

pressure: 35.0 tchamfer lenght: 1250 mmdistance between columns: 1070 mmpiston stroke: 150 + 60 mmcolumn arm: 410 mmtable height: 800 mmdayligth: 470 mmworking feed: 10.0 mm/secreturn speed: 70.0 mm/sectable width: 140 mmControl: ELGO NC Number of working hours: ~ 9.600 hoil volume: 80.0 loperating pressure: max. 240 barvoltage: 380 Vtotal power requirement: 4.0 kWweight: 2200 kgrange L-W-H: 1800 x 1450 x 2150 mm Well maintained condition With only approx. 9.600 operating hours ()Features:- Robust NC-controlled hydraulic press brake- With ELGO NC control unit P8822” Positioning of the backgauge (X axis) Positioning of the depth adjustment (Y1+Y2 axis) Swiveling control panel, front left- NC electric motorized backgauge (X axis) With 2x stop fingers, manually adjustable (R+Z axis)- 1x split set of pointed tools - top- 1x rotatable Multi-V die block- Side safety device (swivel doors)+ FI ...

pressure: 25 tstroke: 145 mmdaylight between the columns: 600 x 160 mmdayligth: mm: mmdiameter of piston: mmweight of the machine ca.: 0,15 tdimensions of the machine ca.: 0,8 x 0,6 x 1,8 mOur frame presses are officially CE certified according to the latest rules.Almost all presses offered in this area are not CE certified.- with manual hydraulics- Move the cylinder sideways- Pressure gauge- 2 press documentsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.