presses machines d'occasion à vendre (1,825)

: neu : ca. 12 Wochen ab Auftrags : Türkei : 41200 €: 786.92 €: 40 to: 1550 mm: X und Y Achse : 160 mm: 1260 mm: 320 mm: 380 mm: hydraulisch : 90 mm/s: 10 mm/s: 600 mm: 845 mm: 100 mm: 120 l: 5.5 kW: 2000 mm: 1600 mm: 2235 mm: 3450 kgNC control for immersion depth (Y) and back gauge (X)synchronization control by means of a torsion shaftsheet support armslight barriersintermediate pieces for the upper tool clampingdie seat and diedie seat with 4 V openingssplit upper tool, slightly cranked, dividedpedaluser manual in GERMAN or ENGLISHOPTIONAL EQUIPMENT (PRICES ON REQUEST):laser safety device FiesslerNC controlled R axismanual crowning tablemotorized crowning tableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 38200 €: 729.62 €: 70 to: 500 mm: 700x350 mm: 700x500 mm: 500 mm: 250 mm: 24 mm/s: 5 mm/s: 4 kW: 1500 mm: 1000 mm: 2500 mm: 2100 kg2-fold round guidancetable and ram with T-slots2 hand operationSiemens PLCmanometerusers manual 4-fold round guidings € on Request Light barrier € on Request Siemens control for programming of stroke and press time € on RequestSiemens touchscreen-control, 50 programsstoreable, for programming:• Upstroke and downstroke quota• Break time in the bottom• time of Decompression• setting pressure of work• Pieces counter• prestop in upstroke and downstroke• setting for movement in manual and in automatic• management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Deompression valve € on Request Oil cooler with decompreission valve € on  ...

Un dépôt de 1200,00 € est requis pour soumettre une offre sur ce lot. Pour obtenir les coordonnées bancaires nécessaires au transfert, veuillez contacter le représentant de la vente aux enchères au alessandro.icardi@surplex.com. Taille de la culasse 850x600 mm Course de culasse 14-180 mm Coups par minute 40 Hauteur minimale entre la table et la glissière : 500 mm Surface de travail : 1300x800 mm Refonte du système électrique 2007 Il convient de noter que le démantèlement et le chargement des machines à vendre doivent être réalisés exclusivement par une équipe externe spécialisée responsable. L’enchérisseur retenu ne pourra pas le financer seul, mais pourra assister aux activités uniquement sous surveillance. Les coûts associés, quantifiés à 1350 €, seront facturés directement au gagnant par l’équipe responsable. Le coût n’inclut pas l’élimination ...

Numéro de série : 055-007/12Tension de fonctionnement : 220 VFréquence : 50 HzCourant nominal : 45 AConnexion : 12,5 kWTension de commande : 60 WForce de pression : 25 MpPression de fonctionnement : 160 kp/cm³ Vitesse : 200 mm/s Ventes : 450 mm/sCourse du ventouse : 500mm Projection : 360mm Distance maximale entre la bélier et la table : 800 mmDimensions de la table : 640 x 500mm Référence : Walter - Lot 167 Auction-ID: A7-48268-22

: neu : ca. 12 Wochen ab Auftrags : Türkei : 18200 €: 349.44 €: 100 to: fix : 1500 mm: 300 mm: 1520 mm: 680 mm: 10 mm/s: 5 mm/s: 6 mm: 500x1520 mm: 100 mm: 190 mm: 2630 mm: 1000 mm: 2275 mm: 2500 kg2 guidingsbig upper tool holder and table with t-slotsupper and lower pressbrake toolmanometerrapid down move with automtic change to working speedpiston stops in every position2 hand operating panelTisch höhenverstellbaraccording to CE regulationsuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Italien : 34500 €: 658.95 €: 100 to: fix : 835 mm: 500 mm: 780 mm: 1050 mm: 25 mm/s: 10 mm/s: 4 mm/s: 800 x 600 mm: 700 x 350 mm: 1800 mm: 1000 mm: 2400 mm: 2050 kgHydraulic multifunction workshop press for pressing and straightening and optional bendingVersion A (automatik): with 2-hand panel with limit micron switch for up/downstroke stop, automatic piston retraction, Siemens CPUVersion S (semiautomatik): 2-hand function by hand lever and pushbutton, limit micron switch for up/downstroke stopStandardmodel for pressing and straightening: table with t-sloats and straightening punchOPTIONS:Bending accessorie with tool holder, upper tool, dies with 4 slots and 2 frontal support armsMobile truck for quick assembly/disassembly of bending unitSiemens controlPressure switchHeat exchangerPiece counterTimerPlate supports for the rear sideSafety light guard ...

Numéro de machine : 24141278Course maximale : 250 mmForce de compression maximale : 1000kN Puissance de transmission : 15 kWTension de fonctionnement : 380 VDimensions de la table : 645 x 695 mmRéférence : Walter - Lot 20 Auction-ID: A7-48268-9

: neu : 2023 : 7295 : ca. 12 Wochen ab Auftrags : Türkei : 22750 €: 436.8 €: 150 to: fix : 1520 mm: 300 mm: 1520 mm: 610 mm: 9 mm/s: 5 mm/s: 10 mm/s: 10 mm: 600x1520 mm: 100 mm: 190 mm: 2630 mm: 1000 mm: 2450 mm: 3270 kg2 guidingsbig upper tool holder and table with t-slotsupper and lower pressbrake toolmanometerrapid down move with automtic change to working speedpiston stops in every position2 hand panel and foot pedalTisch höhenverstellbaraccording to CE regulationsuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Numéro de machine : 212355Plage de vitesses : de 65 à 400 tr/minCourse du ventouse : 8 à 50Réglage du ventouse : 0 à 80Entraînement : 7,5 kWForce de pression : 40 tDimensions de la table : 700 x 510 mmavec bobine, fabricant KEMMERICH, type : V 500 AE, diamètre : 1200mm Référence : Wachtendorf - Lot 60 Auction-ID: A7-48268-3

Numéro de machine : P84-5875Force de pression : 30 kNDimensions de la table : 200 x 200 mmavec diversoutils Référence : Lebendigig - Lot 7 Auction-ID: A7-49056-205

Description générale Presse d’atelier hydraulique fabriquée par OMCN, modèle 204/RE. Conçu pour des opérations lourdes de pressage, de redressement, d’assemblage et de démontage dans des ateliers industriels et des installations de maintenance. La presse est dotée d’une structure en acier soudé en H, avec une table de travail réglable. Détails techniques Fabricant : OMCN Modèle : 204/RE Type de machine : presse hydraulique Année : 2003 Capacité de presse : 150 t Fonctionnement : hydraulique avec moteur électrique et commande manuelle des soupapes Taille du plateau : Environ 850 × 650 mm Lit réglable avec plusieurs positions de hauteur Châssis : Construction en acier soudé en H-frame Manomètre hydraulique : WIKA, 0–600 bar État En état industriel d’occasion. Presse hydraulique complète avec plateau réglable, manomètre hydraulique et vannes de commande  ...

: neu : ca. 8 Wochen ab Auftragse : Italien : 11000 €: 211.2 €: 50 to: fix : 350 mm: 900 mm: 900 mm: max. 9 mm/s: 0,75 kW: 1700 mm: 700 mm: 2100 mm: 650 kgThe hydraulic movement of the piston is controlled by a handwheel,which enables very sensitive and precise positioning.One-handed operation is possible thanks to the working speed of less than 10 mm/s.Very suitable for straightening and pressing work.The cylinder can be moved sideway by handwheel (only ",M", versions)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 18200 €: 349.44 €: 100 to: 1500 mm: 300 mm: 7.5 kW: 2630 mm: 1000 mm: 2275 mm: 2500 kg: 1 : 680 mm: 1520 mm: 5 mm/s: 10 mm/s: 6 mm: 100 mm: 190 mm2 guidingsbig upper tool holder and table witht-slotsupper and lower pressbrake toolmanometerrapid down move with automtic changeto working speedpiston stops in every position2 hand operating panelheight adjustable tableuser manual in Germanand Englishaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 250 tthroat: 360 mmTable dimensions: 1250 x 630 mmtable diameter: 250 mmdimension of ram: 850 x 450 mmdayligth: 800 mmpiston stroke: bis 500 mmdiameter of piston: 400/360 mmram stroke speed: abwärts 200 mm/secram stroke speed: aufwärts 110 mm/sectotal power requirement: 20,5 kWweight of the machine ca.: 8 tPress force: 250 tThroat depth: 360 mmTable size: 1,250 × 630 mmTable opening diameter: 250 mmRam clamping surface: 850 × 450 mmInstallation height (daylight): 800 mmRam stroke: up to 500 mmMain cylinder diameter: 400 / 360 mmRam speed (downward): 200 mm/sRam speed (upward): 110 mm/sTotal power requirement: 20.5 kWMachine weight: approx. 8 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 20700 €: 397.44 €: 150 to: 1000 mm: 300 mm: 11 kW: 2110 mm: 1000 mm: 2450 mm: 2400 kg: 1 : 610 mm: 1020 mm: 5 mm/s: 10 mm/s: 8 mm: 100 mm: 190 mm2 guidingsbig upper tool holder and table witht-slotsupper and lower pressbrake toolmanometerrapid down move with automtic changeto working speedpiston stops in every positionmanuel and 2 hand workingheight adjustable tableuser manual in Germanand Englishaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 120 tchamfer lenght: . mmdistance between columns: 2550 mmstroke: 200 mmtotal power requirement: 13,2 kVANumber of working hours: 2500 hworkpiece: 1 Satz Standart workpiece: 1 Satz Standart Prisma Number of strokes: 11000 total power requirement: kWweight of the machine ca.: 8,3 tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for ...

pressure: 100 tno. of strokes: 30-70 Hub/minMax ram stroke: 130 mmram adjustment: 100 mmtable surface area: 950x630 mmram surface: 630x600 mmthroat: 340 mmdayligth: 480 mmcoil: GSW total power requirement: kWweight of the machine ca.: 8,9 tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software s ...

pressure: 400 tthroat: 1140 mmstroke: 600 mmtable surface area: 2000x1000 mmPlate: 4000x1000x300 mmram head dimension: 2000x1040 mmCylinder: 300 mmDaylight: 650 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: 3,9x4x4,2 mMachine has been overhauled.Maximum distance from ram to clamping plate: 1250 mmThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch T ...

pressure: 100 tpassage width: 1000 mmstroke: 700 mmwidth: 800 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 400 tchamfer lenght: 4000 mmdistance between columns: 3500 mmControl: CNC type: BC 25 Graphicthroat: 400 mmtotal power requirement: 37,5 kWweight of the machine ca.: 25 tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

press capacity: 250 tspindle diameter: 160 mmram stroke range: 180 mmstroke speed: 71 Hub/mincolumn daylight: 450 mmtable surface area: 560x450 mmram surface: 450x400 mmtotal power requirement: 12 kWweight of the machine ca.: 9 tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of L ...

number of controlled axis: . workpiece weight: . kgthroat: . mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mPosition sheet metal clips 8 pieces different sizes The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 tthroat: 350 mmstroke: 20-140 mmstroke of worktool slide: 40-60 Hub/minram adjustment: 75 mmram surface: 600x300 mmtable surface area: 1000x700 mmfeed - rapid adjustment: total power requirement: kWweight of the machine ca.: 10 tdimensions of the machine ca.: mSerial No.20279The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulM ...

pressure: . tstroke: 500 mmdaylight: 800 mmarbor support: 3000 Ram: 600x250 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mBanning feed unitAdjustable supports (1300 mm each)2 x roller conveyors (4000 x 800)Storage area (4000 x 1600)The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of saleapply exclusively.About us Morethan 400 of our own machines in stockOver 15,000 m² of storage space, 70 t crane capacityMore than 10,000 items and accessories for your workshopIf you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment.We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solut ...

pressure: 1000 tdistance between columns: . mmstroke: . mmtotal power requirement: . kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of saleapply exclusively.About us More than 400 of our own machines in stockOver 15,000 m² of storage space, 70 t crane capacityMore than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours arepossible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tthroat: 350 mmstroke: 130 mmstroke of worktool slide: 3070 Hub/minram adjustment: 100 mmram surface: 500x300 mmtable surface area: 1000x600 mmfeed - rapid adjustment: total power requirement: kWweight of the machine ca.: 9,8 tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software ...

pressure: X ttable-size: 550x390 mmthroat: 550 mmmagnetic plate size: 250x100 mmweight of the machine ca.: 0.25 tMore details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 tchamfer lenght: 3000 mmdistance between columns: . mmControl: CNC type: DA 65 R stroke: 200 mmsafety distance: 136 mmrapid traverse - down: 100 mm/secrapid traverse - up: 92 mm/secworking feed: 1-10 mm/secthroat: mmtotal power requirement: kWweight of the machine ca.: 13 tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for t ...

pressure: 100 ttable length: 2000 mmtable width: 1580 mmstroke: mmpressing speed: mm/secvoltage: 400 Vreturn capacity: tmax. table loading capacity: 10.000 / 20.000 kgtotal power requirement: 18 kWweight of the machine ca.: 22 tdimensions of the machine ca.: 5,65 x 2,95 x 5,85 mSerial no: 03.246.00max. Distance between columns (width) 1620 mmmax.load upper tableno swiveling 10t / swiveling 6tmax.load lower table 22tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tchamfer lenght: 3000 mmdistance between columns: 2550 mmstroke: 150 mmtotal power requirement: . kVANumber of working hours: . hworkpiece: workpiece: Number of strokes: total power requirement: kWweight of the machine ca.: 8,3 tdimensions of the machine ca.: mBack gauge 400mmThroat 250mmSpeed: 8mm /SkW: 6,5Volts: 380 The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of saleapply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch Tea ...