presses machines d'occasion à vendre (1,599)

Course : 135 mm, épaisseur max. de la feuille : 20 mm, longueur de pliage max. : 3050 mm, force de pression : 80 t, pression de fonctionnement max. : 2975 psi, ouverture max. de la matrice : 250 mm, plage d’angle de pliage : 1-42, capacité d’huile : 150L, poids max. de l’outil supérieur/inférieur : 40 kg/115 kg. Dimensions de la machine X/Y/Z : env. 4000mm/2050mm/2450mm, poids : env. 6000kg. Documentation disponible. Une inspection sur place est possible.

Description : Presse hydraulique à colonne unique avec alimentation en cycle Type : HEP 100 Spécifications Raccordement électrique : 400 volts/50 Hz +/- 3 % Puissance d’entraînement : 5,5 kW Puissance totale requise : env. 6,5 kW Tension de commande : 24 volts/50 Hz +/- 3 % Hydr. Connexion max. : 210 bar Ensemble : 200 bar Données de performance Vitesses de la RAM AB : environ 48 mm/s à une force de compression maximale de 100 kN Vitesse de travail AB réduite réglable à : environ 10 mm/s à une force de compression maximale de 100 kN Vitesse du vérin activée environ 96 mm/s à max. env. 50 kN de force de rétraction Course du piston : max. 200 mm Débit de la pompe : env. 15 l/min.

Trempages de presse à colonne unique TYPE : HZS 160 Spécifications: Fabricant : Dunkes Modèle : HZS 160 Heures de fonctionnement : environ 2250 La machine est en bon état et entièrement fonctionnelle.

Une presse plieuse Durmazlar distribuée par Knuth est disponible. Force de pression : 35t, longueur de pliage : 1350mm, puissance du moteur : 5,5kW, course : 100mm, vitesse de course : 17/min, pression de service max. : 240bar, capacité d’huile : 150l. Dimensions de la machine X/Y/Z : env. 1400mm/1400mm/2100mm, poids : env. 1750kg, heures de fonctionnement : 1258h. Une inspection sur place est possible.

- Capacité de pression : 22 t - Projection : 175 mm - Course : 120 1/min - Réglage du piston : 50 mm - Réglage de la hauteur de la table 50 mm - Réglage de la course : 8-80 mm - Table : 520 x 400 mm - Piston : 250 x 160 mm - Tendeur avec serrage à tourillon, D35 mm - Puissance du moteur 1,5 kW - Fonctionnement très silencieux - Débrayage mécanique de l’accouplement à coin rotatif via vérin pneumatique - Pédale pneumatique - Pas d’UVV - 4 pièces de pieds de machine - Câble de raccordement : prise CEE 16 A - Raccordement à l’air avec raccord rapide - Poids : env. 2 000 kg - Dimensions : Largeur 820 x Profondeur 1100 x Hauteur 1800 mm

Une ancienne presse excentrique à colonne unique WMW est disponible. Force de pression : 25 mp, couple : 25 km/min, surface de cisaillement : 630 mm², épaisseur max. de la feuille : 3,2 mm, capacité de travail : 50 km/min, épaisseur de la feuille traversante : 1,6 mm, capacité de travail : 25 km/m, course du vérin : 5 mm-60 mm, distance max. entre la table et le vérin : 400 mm, vitesse de course : 112 coups/min, poids de la machine : env. 1300 kg. Une inspection sur place est possible.

Key data: 630 t, 275 mm

A vendre est une presse d’abaissement d’occasion, fabricant Sack + Kiesselbach, type EP 630. La machine est en très bon état. La presse a travaillé dans une entreprise de gravure en tant que presse d’essai. Caractéristiques techniques : Force de pression : max. 630 tonnes. Hauteur d’installation : max. 325 mm Course : max. 275 mm Poids : 4 000 kg

Key data: 100 t

Vente due au passage à la presse excentrique Force de pression 100 tonnes Profondeur de chargement 360 mm Course 500 mm Lumière du jour 800 mm Surface du piston 530 x 400 mm Hauteur de la table au-dessus du sol 710 mm Vitesse de travail 10mm/sec Vitesse d’approche 150 mm/sec Vitesse de retour 150 mm/sec Puissance requise 17 kW Dimensions L x l x H 1 400 x 2 000 x 3 200 mm Poids de la machine env. 5,1 t Année de fabrication 2001 Le prix est net, la TVA peut être réclamée. Installations de chargement disponibles Toutes les informations sans garantie

Presse Walter

gebr. Presse post-pliage Fabr. Graebener, Type GRNM, YOC 2005 Force de flexion max. 16 t. Longueur de l’outil 1 600 mm Réglage de l’en-bas, hydraulique 2 cylindres Dimensions 5080 x 3290 x 2540 mm Kj Uovvlllerhyxkenb Poids 65 t.

Un poinçon hydraulique NDC est disponible. Poids : env. 1750 kg. Une inspection sur place est possible.

Force de pression : 4000 kN, pression de pression : 320 bar, pression d’huile : 250 bar, force du support de pièce brute : 1600 kN, course du support de pièce brute : 200 mm, dimensions du support de pièce brute X/Y : 1000 mm/800 mm, force d’éjection du support : 160 kN, force d’éjection : 63 kN, course de l’éjecteur : 100 mm, distance de dépassement : 40 mm, temps de course : 190 ms. Documentation disponible. Une inspection sur place est possible.

Force de poinçonnage 45 t. 2 pièces disponibles sur stock (Vidéo sous tension sur demande)

pressure: 80.0 tstroke: 250 mmtable surface area: 1040 x 260 mmcolumn travel between the guideways: 1040 mmajustment speed: 8.0 mm/secworking feed: 5.0 mm/secreturn speed: 10.0 mm/secengine output: 5.5 kWweight of the machine ca.: 835 kg.dimensions of the machine ca.: 1810 x 700 x 2100 mmFurnishing:- Robust electro-hydraulic workshop press, with fixed cylinder- Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more.- Robust welded steel construction for high demands- Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket- 1x set of V-block prism supports- Manometer for pressure display- simply constructed hand control with: 1x delivery speed 1x working speed 1x retreat speed- Piston can be stopped in any position- Hydraulic tank mounted on the side- Operation manua ...

pressure: 20 tthroat: 200 mmstroke: 0 - 50 mmtable:: 360 x 550 mmtable:: 140 mm - Bohrung no. of strokes: 160 Hub/minbore: 35,0 mm - Werkzeug compressed air: max. 6,0 bardayligth: 240 mmtotal power requirement: 2,2 kWweight: 1.250 kgrange L-W-H: 1310 x 1250 x 1860 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 30 tthroat: 200 mmstroke: 0 - 60 mmtable:: 400 x 600 mmtable:: 150 mm - Bohrung no. of strokes: 140 Hub/minbore: 40,0 mm - Werkzeug compressed air: max. 6,0 bardayligth: 300 mmtotal power requirement: 3,0 kWweight: 1.670 kgrange L-W-H: 1150 x 1350 x 2050 mmFurnishing:- Welded steel structure body frame- AISI 4140 (42CrMo4) alloy steel crankshaft- CNC ground for maximum precision SnBz-12 quality- Bronze bearings, ground for minimal surface resistance- 4 sides pneumatic clutch-brake combination- PLC control for safety (PILZ Germany)- Photo cell light barriers around the work table (PILZ Germany)- Two-hand and foot pedal control- Adjustable stroke- Central lubrication system- CE safety approval by TÜV- electrical equipment SIEMENS, SCHNEIDER, PHOENIX, OMRONThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 10 tthroat: 160 mmstroke: 0 - 40 mmtable:: 270 x 370 mmtable:: 100 mm - Bohrung no. of strokes: 200 Hub/minbore: 25,0 mm - Werkzeug compressed air: max. 6,0 bardayligth: 180 mmtotal power requirement: 0,75 kWweight: 590 kgrange L-W-H: 1.168 x 1.010 x 1.670 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 20,0 tstroke: 185 mmtable surface area: 170 mm Breitecolumn travel between the guideways: 510 mmweight of the machine ca.: 112 kgdimensions of the machine ca.: 1630 x 560 x 730 mmFurnishing:- Standard with pressure cylinder that can be moved to the left and right- For aligning, pressing, bending, assembling gears, discs, etc.- Standard with foot pedal and hydraulic hand pump for piston delivery- Standard with support prism for aligning shafts- With automatic piston retraction by integrated return spring as standard- Height-adjustable press table with locking bolts- Large manometer for reading the compressive force- Including two-stage hydraulic pump- Robust construction with welded steel frameThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 30 tstroke: 150 mmtable surface area: 185 mm Breitecolumn travel between the guideways: 530 mmweight of the machine ca.: 162 kgdimensions of the machine ca.: 800 x 700 x 1805 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 50 tstroke: 200 mmtable surface area: 730 x 205 mmdayligth: 1050 mmcolumn travel between the guideways: 730 mmweight of the machine ca.: 288 kg.Description :- Standard with cable winch- for easy height adjustment of the support table- Piston delivery either manually or pneumatically- Powerful workshop presses for craft and repair businesses- Optimum price-performance ratio thanks to rational design- The standard foot pedal keeps your hands free for the workpiece- Increased range of application thanks to the optionally. available pressure mandrel set (10 pieces).- Pressure cylinder with integrated return spring for piston return- Welded steel frame for heavy use and high stability- Versatile in use thanks to the pressure cylinder that can. be moved to the left and rightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 50.0 tchamfer lenght: 2090 mmdistance between columns: 1665 mmcolumn arm: 400 mmtable width: 60.0 mmajustment speed: 100 mm/secworking feed: 10.0 mm/secreturn speed: 92.0 mm/secstroke: 200 mmtable height: 910 mmdayligth: 470 mmNumber of working hours: 36.160 htotal power requirement: 6.0 KWweight of the machine ca.: 4850 kgrange L-W-H: 3458 x 2450 x 2450 mm with only approximately 36.160 operating hours ()- Inspected condition - Machine video -https://www.youtube.com/watch?v=x8Z0h2_wA6sEquipment:- CNC electro-hydraulic press brake- CNC control type OPERATEUR 2 with 8 axes (X1+X2, Y1+Y2, R1+R2, Z1+Z2) CNC-controlled backgauge adjustment (X-axis) CNC-controlled vertical adjustment of the stop fingers (R1+R2) CNC-controlled left-right adjustment of the stop fingers (Z1+Z2) Hand control unit for manual axes movement Pivoting control, front left- AMADA/PROMECAM quick clamping system ...

pressure: 160 tchamfer lenght: 4100 mmdistance between columns: 3600 mmcolumn arm: 400 mmram stroke speed: 200 mm/secwork speed: 10.0 mm/minreturn speed: 165 mm/secwork stroke: ca. 350 mmdayligth: ca. 660 mmoil volume: 450 ltr.table height: 830 / 950 mmtable width: 75.0 / 60.0 mmvoltage: 400 Volttotal power requirement: 18.5 kWweight: 13440 kgrange L-W-H: 5150 x 2050 x 3150 mm current new price approx. 90.000 euros special price on request------------------------------------------------------ULTIMA PLUS electro-hydraulic press brake with: increased installation height .. approx. 660 mm increased cylinder stroke .. approx. 350 mm------------------------------------------------------ in checked condition - machine video -https://www.youtube.com/watch?v=chgCaXLnpa8Equipment:- CNC electro-hydraulic die/press brake- CYBELEC CNC control DNC 880 S swiveling control panel, front right 2D graphic ...

pressure: 60.0 tchamfer lenght: 1270 mmdistance between columns: 1000 mmcolumn arm: 410 mmram stroke speed: 160 mm/secwork speed: 10.0 mm/secreturn speed: 165 mm/secwork stroke: 275 mmdayligth: 530 mmtable height: 900 mmtable width: 90.0 mmback stop - adjustable: max. 800 mmoil volume: 150 ltr.voltage: 400 Vengine output: 7.5 kWWeight: 4320 kgrange L-W-H: 2250 x 1960 x 2750 mm Demonstration/demo machine () From our showroom (like new) With very few operating hours--------------------------------------------------CNC press brake with special equipment Version ERGO - knee room for the operator flexible articulated arm mount for the controller increased installation height increased cylinder stroke as well as increased bending beam speeds-------------------------------------------------- Furnishing:- DELEM CNC control model DA-66T graphic/touch screen 2D graphical programming 17 TFT color s ...

pressure: 150 tstroke: 300 mmtable surface area: 1070 x 290 mmcolumn travel between the guideways: 1070 mmajustment speed: 9.0 mm/secworking feed: 5.0 mm/secreturn speed: 10.0 mm/secengine output: 11.0 kWweight of the machine ca.: 1870 kg.range L-W-H: 2200 x 1300 x 2300 mm Exhibition machine from 2021 with only approximately 2 operating hours Condition as new Special price upon requestFeatures:- Robust electro-hydraulic workshop press with fixed cylinder- Ideal for aligning axles, shafts, etc., but also for pressing in. and out bolts, bearings, bushings, and much more.- Robust welded steel construction for heavy-duty use- Table height adjustment via piston rod Includes round steel chain and 2 locking pins Piston rod with metric mount- 1 set of V-block prism supports- Pressure gauge for pressure display- Simple manual control with: 1 feed speed 1 working speed 1 retraction speed- Piston c ...

pressure: 135 tchamfer lenght: 3050 mmdistance between columns: 2550 mmstroke: 400 mmquantity of oil: 300 lControl: CYBELEC DNC 1200 PS Eco total power requirement: 15 kWweight of the machine ca.: 10.700 Kgrange L-W-H: 4200x2200x3200 mmEquipment:- Controlled axes: Y1, Y2, X, R, Z1, Z2- SICK” light barrier in front of the machine- Side safety guards- Protective grille behind the machine- foot switch- incl. toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 60.0 tchamfer lenght: 2600 mmdistance between columns: 2050 mmcolumn arm: 310 mmworking feed: 10.0 mm/secreturn speed: 61.0 mm/secstroke: 100 - 140 mmdayligth: 450 mmtable height: 860 mmoil volume: 100 ltr.Control: ELGO P8822 operating pressure: max. 200 barNumber of working hours: ca. 2.370 hvoltage: 380 Vtotal power requirement: 5.5 kWweight of the machine ca.: 5000 kg.range L-W-H: 3000 x 1850 x 2050 mm good / well-maintained condition () with only approx. 2,370 operating hours current new price approx. 60.000 euros special price on requestin checked conditions - machine video -https://www.youtube.com/watch?v=PsUeM3O5wAMEquipment:- NC electro-hydraulic press brake- with ELGO NC control unit P8822 Input of target/actual values for back stop Input of target/actual values for depth adjustment ` swiveling operation, front left manual mode selectable- NC controlled axes: Y1 + Y2 + ...

pressure: 80.0 tchamfer lenght: 2050 mmdistance between columns: 1550 mmcolumn arm: 250 mmtable width: 85.0 / 135 mmstroke: ca. 390 mmdayligth: ca. 585 mmajustment speed: 180 mm/secworking feed: 1.0 - 10.0 mm/secreturn speed: 135 mm/secwork height max.: 1050 mmNumber of working hours: 32.495 hoil volume: 200 loperating pressure: 320 bartotal power requirement: 11.6 KWweight of the machine ca.: 7300 kgrange L-W-H: 3700 x 2000 x 3000 mm Good/well-maintained condition ()- in checked conditions - machinevideo -https://www.youtube.com/watch?v=IKyUmzB0WTI-------------------------- -----------------------CNC electro-hydraulic press brake with: Increased installation height .. approx. 550 mm Increased cylinder stroke .. approx. 390 mm-------------------------------------------------Features:- Robust electro-hydraulic press brake MADE IN GERMANY ()- CYBELEC CNC control DNC 904 PS-A (SN 0332) Pivo ...

pressure: 135 tchamfer lenght: 3050 mmdistance between columns: 2600 mmcolumn arm: 410 mmajustment speed: 160 mm/secworking feed: 10.0 mm/secreturn speed: 120 mm/secstroke: 265 mmdayligth: 530 mmtable height: 900 mmoil volume: 200 ltr.control: DNC 880 S Number of working hours: ~ 17.200 htotal power requirement: 15.0 kWweight of the machine ca.: 10250 kg.range L-W-H: 4570 x 2360 x 2900 mm good condition () current new price approx. 80.000 euros special price on request- in checked condition - machine video -https://www.youtube.com/watch?v=dyv7iQXcRt4Equipment:- electro-hydraulic CNC press brake- two synchronized cylinders with HIGH PERFORMANCE hydraulic components- with CYBELEC CNC control - DNC 880S 2D graphic display for display and multiple simulation graphic 2D programming easy handling automatic bending sequence calculation and collision detection large product and tool library aut ...

pressure: 300 tchamfer lenght: 4100 mmdistance between columns: 3710 mmstroke - stepless adjustable: 250 mmcolumn arm: 330 mmdayligth: 500 mmtable height: 940 mmtable width: 250 mmworking feed: 7.0 mm/secreturn speed: 90.0 mm/secControl: konv. operating pressure: max. 305 barvoltage: 380 Vtotal power requirement: 22.5 kWweight: 25200 kgrange L-W-H: 4320 x 2100 x 3500 mm well-maintained condition ()- in checked condition - machine video -https://www.youtube.com/watch?v=rPOBwTfVReoEquipment:- simple, conventional hydraulic press brake- swiveling control panel, left front- electro-motoric back stop (X axis) adjustment via front control panel (button) with analog position display fine adjustment via handwheel, front- with 3x stop fingers, manually adjustable- electro-motoric depth adjustment (Y1+Y2 axis) with analog position display- 1x split set of 85° deer foot upper tool- 1x MultiV - uni ...

pressure: 175 tchamfer lenght: 3100 mmdistance between columns: 2600 mmcolumn arm: 410 mmram stroke speed: 180 mm/secwork speed: 12.0 mm/minreturn speed: 190 mm/secwork stroke: 275 mmdayligth: 550 mmoil volume: 300 ltr.table height: 900 mmtable width: 90.0 mmvoltage: 400 Volttotal power requirement: 15.0 kWweight: 9800 kgrange L-W-H: 4150 x 2150 x 2800 mm-------------------------------------------------- HIGH-SPEED hydraulic press brake withincreased installation heightincreased cylinder strokeenlarged projection-------------------------------------------------- Furnishing:- DELEM CNC control model DA 66T- swiveling touchscreen control unit- 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning- electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm- on ball screws- controlled electr. Stop fingers Z1 + Z2- split upper deer foot tool Roleri 135.85.R08, System A-  ...