presses machines d'occasion à vendre (1,675)

pressure: 80.0 tstroke: 250 mmtable surface area: 1040 x 260 mmcolumn travel between the guideways: 1040 mmajustment speed: 8.0 mm/secworking feed: 5.0 mm/secreturn speed: 10.0 mm/secengine output: 5.5 kWweight of the machine ca.: 835 kg.dimensions of the machine ca.: 1810 x 700 x 2100 mmFurnishing:- Robust electro-hydraulic workshop press, with fixed cylinder- Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more.- Robust welded steel construction for high demands- Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket- 1x set of V-block prism supports- Manometer for pressure display- simply constructed hand control with: 1x delivery speed 1x working speed 1x retreat speed- Piston can be stopped in any position- Hydraulic tank mounted on the side- Operation manua ...

pressure: 20 tthroat: 200 mmstroke: 0 - 50 mmtable:: 360 x 550 mmtable:: 140 mm - Bohrung no. of strokes: 160 Hub/minbore: 35,0 mm - Werkzeug compressed air: max. 6,0 bardayligth: 240 mmtotal power requirement: 2,2 kWweight: 1.250 kgrange L-W-H: 1310 x 1250 x 1860 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 30 tthroat: 200 mmstroke: 0 - 60 mmtable:: 400 x 600 mmtable:: 150 mm - Bohrung no. of strokes: 140 Hub/minbore: 40,0 mm - Werkzeug compressed air: max. 6,0 bardayligth: 300 mmtotal power requirement: 3,0 kWweight: 1.670 kgrange L-W-H: 1150 x 1350 x 2050 mmFurnishing:- Welded steel structure body frame- AISI 4140 (42CrMo4) alloy steel crankshaft- CNC ground for maximum precision SnBz-12 quality- Bronze bearings, ground for minimal surface resistance- 4 sides pneumatic clutch-brake combination- PLC control for safety (PILZ Germany)- Photo cell light barriers around the work table (PILZ Germany)- Two-hand and foot pedal control- Adjustable stroke- Central lubrication system- CE safety approval by TÜV- electrical equipment SIEMENS, SCHNEIDER, PHOENIX, OMRONThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 10 tthroat: 160 mmstroke: 0 - 40 mmtable:: 270 x 370 mmtable:: 100 mm - Bohrung no. of strokes: 200 Hub/minbore: 25,0 mm - Werkzeug compressed air: max. 6,0 bardayligth: 180 mmtotal power requirement: 0,75 kWweight: 590 kgrange L-W-H: 1.168 x 1.010 x 1.670 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 20,0 tstroke: 185 mmtable surface area: 170 mm Breitecolumn travel between the guideways: 510 mmweight of the machine ca.: 112 kgdimensions of the machine ca.: 1630 x 560 x 730 mmFurnishing:- Standard with pressure cylinder that can be moved to the left and right- For aligning, pressing, bending, assembling gears, discs, etc.- Standard with foot pedal and hydraulic hand pump for piston delivery- Standard with support prism for aligning shafts- With automatic piston retraction by integrated return spring as standard- Height-adjustable press table with locking bolts- Large manometer for reading the compressive force- Including two-stage hydraulic pump- Robust construction with welded steel frameThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 30 tstroke: 150 mmtable surface area: 185 mm Breitecolumn travel between the guideways: 530 mmweight of the machine ca.: 162 kgdimensions of the machine ca.: 800 x 700 x 1805 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 50 tstroke: 200 mmtable surface area: 730 x 205 mmdayligth: 1050 mmcolumn travel between the guideways: 730 mmweight of the machine ca.: 288 kg.Description :- Standard with cable winch- for easy height adjustment of the support table- Piston delivery either manually or pneumatically- Powerful workshop presses for craft and repair businesses- Optimum price-performance ratio thanks to rational design- The standard foot pedal keeps your hands free for the workpiece- Increased range of application thanks to the optionally. available pressure mandrel set (10 pieces).- Pressure cylinder with integrated return spring for piston return- Welded steel frame for heavy use and high stability- Versatile in use thanks to the pressure cylinder that can. be moved to the left and rightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 50.0 tchamfer lenght: 2090 mmdistance between columns: 1665 mmcolumn arm: 400 mmtable width: 60.0 mmajustment speed: 100 mm/secworking feed: 10.0 mm/secreturn speed: 92.0 mm/secstroke: 200 mmtable height: 910 mmdayligth: 470 mmNumber of working hours: 36.160 htotal power requirement: 6.0 KWweight of the machine ca.: 4850 kgrange L-W-H: 3458 x 2450 x 2450 mm with only approximately 36.160 operating hours ()- Inspected condition - Machine video -https://www.youtube.com/watch?v=x8Z0h2_wA6sEquipment:- CNC electro-hydraulic press brake- CNC control type OPERATEUR 2 with 8 axes (X1+X2, Y1+Y2, R1+R2, Z1+Z2) CNC-controlled backgauge adjustment (X-axis) CNC-controlled vertical adjustment of the stop fingers (R1+R2) CNC-controlled left-right adjustment of the stop fingers (Z1+Z2) Hand control unit for manual axes movement Pivoting control, front left- AMADA/PROMECAM quick clamping system ...

pressure: 160 tchamfer lenght: 4100 mmdistance between columns: 3600 mmcolumn arm: 400 mmram stroke speed: 200 mm/secwork speed: 10.0 mm/minreturn speed: 165 mm/secwork stroke: ca. 350 mmdayligth: ca. 660 mmoil volume: 450 ltr.table height: 830 / 950 mmtable width: 75.0 / 60.0 mmvoltage: 400 Volttotal power requirement: 18.5 kWweight: 13440 kgrange L-W-H: 5150 x 2050 x 3150 mm current new price approx. 90.000 euros special price on request------------------------------------------------------ULTIMA PLUS electro-hydraulic press brake with: increased installation height .. approx. 660 mm increased cylinder stroke .. approx. 350 mm------------------------------------------------------ in checked condition - machine video -https://www.youtube.com/watch?v=chgCaXLnpa8Equipment:- CNC electro-hydraulic die/press brake- CYBELEC CNC control DNC 880 S swiveling control panel, front right 2D graphic ...

pressure: 60.0 tchamfer lenght: 1270 mmdistance between columns: 1000 mmcolumn arm: 410 mmram stroke speed: 160 mm/secwork speed: 10.0 mm/secreturn speed: 165 mm/secwork stroke: 275 mmdayligth: 530 mmtable height: 900 mmtable width: 90.0 mmback stop - adjustable: max. 800 mmoil volume: 150 ltr.voltage: 400 Vengine output: 7.5 kWWeight: 4320 kgrange L-W-H: 2250 x 1960 x 2750 mm Demonstration/demo machine () From our showroom (like new) With very few operating hours--------------------------------------------------CNC press brake with special equipment Version ERGO - knee room for the operator flexible articulated arm mount for the controller increased installation height increased cylinder stroke as well as increased bending beam speeds-------------------------------------------------- Furnishing:- DELEM CNC control model DA-66T graphic/touch screen 2D graphical programming 17 TFT color s ...

pressure: 150 tstroke: 300 mmtable surface area: 1070 x 290 mmcolumn travel between the guideways: 1070 mmajustment speed: 9.0 mm/secworking feed: 5.0 mm/secreturn speed: 10.0 mm/secengine output: 11.0 kWweight of the machine ca.: 1870 kg.range L-W-H: 2200 x 1300 x 2300 mm Exhibition machine from 2021 with only approximately 2 operating hours Condition as new Special price upon requestFeatures:- Robust electro-hydraulic workshop press with fixed cylinder- Ideal for aligning axles, shafts, etc., but also for pressing in. and out bolts, bearings, bushings, and much more.- Robust welded steel construction for heavy-duty use- Table height adjustment via piston rod Includes round steel chain and 2 locking pins Piston rod with metric mount- 1 set of V-block prism supports- Pressure gauge for pressure display- Simple manual control with: 1 feed speed 1 working speed 1 retraction speed- Piston c ...

pressure: 80.0 tchamfer lenght: 2050 mmdistance between columns: 1550 mmcolumn arm: 250 mmtable width: 85.0 / 135 mmstroke: ca. 390 mmdayligth: ca. 585 mmajustment speed: 180 mm/secworking feed: 1.0 - 10.0 mm/secreturn speed: 135 mm/secwork height max.: 1050 mmNumber of working hours: 32.495 hoil volume: 200 loperating pressure: 320 bartotal power requirement: 11.6 KWweight of the machine ca.: 7300 kgrange L-W-H: 3700 x 2000 x 3000 mm Good/well-maintained condition ()- in checked conditions - machinevideo -https://www.youtube.com/watch?v=IKyUmzB0WTI-------------------------- -----------------------CNC electro-hydraulic press brake with: Increased installation height .. approx. 550 mm Increased cylinder stroke .. approx. 390 mm-------------------------------------------------Features:- Robust electro-hydraulic press brake MADE IN GERMANY ()- CYBELEC CNC control DNC 904 PS-A (SN 0332) Pivo ...

pressure: 135 tchamfer lenght: 3050 mmdistance between columns: 2600 mmcolumn arm: 410 mmajustment speed: 160 mm/secworking feed: 10.0 mm/secreturn speed: 120 mm/secstroke: 265 mmdayligth: 530 mmtable height: 900 mmoil volume: 200 ltr.control: DNC 880 S Number of working hours: ~ 17.200 htotal power requirement: 15.0 kWweight of the machine ca.: 10250 kg.range L-W-H: 4570 x 2360 x 2900 mm good condition () current new price approx. 80.000 euros special price on request- in checked condition - machine video -https://www.youtube.com/watch?v=dyv7iQXcRt4Equipment:- electro-hydraulic CNC press brake- two synchronized cylinders with HIGH PERFORMANCE hydraulic components- with CYBELEC CNC control - DNC 880S 2D graphic display for display and multiple simulation graphic 2D programming easy handling automatic bending sequence calculation and collision detection large product and tool library aut ...

pressure: 300 tchamfer lenght: 4100 mmdistance between columns: 3710 mmstroke - stepless adjustable: 250 mmcolumn arm: 330 mmdayligth: 500 mmtable height: 940 mmtable width: 250 mmworking feed: 7.0 mm/secreturn speed: 90.0 mm/secControl: konv. operating pressure: max. 305 barvoltage: 380 Vtotal power requirement: 22.5 kWweight: 25200 kgrange L-W-H: 4320 x 2100 x 3500 mm well-maintained condition ()- in checked condition - machine video -https://www.youtube.com/watch?v=rPOBwTfVReoEquipment:- simple, conventional hydraulic press brake- swiveling control panel, left front- electro-motoric back stop (X axis) adjustment via front control panel (button) with analog position display fine adjustment via handwheel, front- with 3x stop fingers, manually adjustable- electro-motoric depth adjustment (Y1+Y2 axis) with analog position display- 1x split set of 85° deer foot upper tool- 1x MultiV - uni ...

pressure: 175 tchamfer lenght: 3100 mmdistance between columns: 2600 mmcolumn arm: 410 mmram stroke speed: 180 mm/secwork speed: 12.0 mm/minreturn speed: 190 mm/secwork stroke: 275 mmdayligth: 550 mmoil volume: 300 ltr.table height: 900 mmtable width: 90.0 mmvoltage: 400 Volttotal power requirement: 15.0 kWweight: 9800 kgrange L-W-H: 4150 x 2150 x 2800 mm-------------------------------------------------- HIGH-SPEED hydraulic press brake withincreased installation heightincreased cylinder strokeenlarged projection-------------------------------------------------- Furnishing:- DELEM CNC control model DA 66T- swiveling touchscreen control unit- 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning- electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm- on ball screws- controlled electr. Stop fingers Z1 + Z2- split upper deer foot tool Roleri 135.85.R08, System A-  ...

pressure: 200 tchamfer lenght: 3100 mmdistance between columns: 2600 mmcolumn arm: 250 mmram stroke speed: 100 mm/secreturn speed: 75,0 mm/secwork speed: 7,0 mm/minwork stroke: 180 mmdayligth: 415 mmoil volume: 200 ltr.table height: 900 mmvoltage: 400 Voltrange L-W-H: 4450x2050x2650 mmFurnishing:- DELEM - CNC control model DA-58T- controlled axes: Y1 - Y2 and X- FIESSLER AKAS - laser protection in front of the machine- Deer foot upper tool- Universal die block- manual table crowning- Safety device: light barrier behind the machine- 2 front support arms- SIEMENS - electrical system- BOSCH / HOERBIGER hydraulic system- CE mark / declaration of conformity- Operating manual: machine and control- Safety manual: press brakes The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 400 tchamfer lenght: 4100 mmdistance between columns: 3550 mmcolumn arm: 510 mmram stroke speed: 110 mm/secwork speed: 8.4 mm/secreturn speed: 130 mm/secwork stroke: 375 mmdayligth: 650 mmtable height: 1000 mmtable width: 240 mmback stop - adjustable: max. 800 mmoil volume: 400 ltr.voltage: 400 Volttotal power requirement: 30.0 kWweight: 26409 kgrange L-W-H: 5450 x 2650 x 3470 mm-------------------------------------------------- HIGH-SPEED hydraulic press brake withincreased installation heightincreased cylinder strokeenlarged projection-------------------------------------------------- Furnishing:- DELEM CNC control model DA 66T- swiveling touchscreen control unit- 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning- electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm- on ball screws- controlled electr. Stop fingers Z1 + Z2- split upper deer foot ...

pressure: 40.0 tstroke: 285 mmflat steel: 250 x 24 mmworking feed: 10.0 mm/secreturn speed: 10.0 mm/minwork height max.: 930 mmtable:: 660 x 1250 mmtotal power requirement: 4.0 kWmotor: 400 Volt 50 Hzoil volume: 40.0 lweight: 800 kgrange L-W-H: 1450 x 800 x 1300 mmFurnishing :- electro-hydraulic horizontal bending machine- large, robust machine table made of hardened steel- Machine made of hardened and ground forged steel- Digital display for stroke setting Programming of 1x bend end point & 1x retract point possible- 1x tool set (1x bending punch / 1x 1V die)- infinitely variable adjustment of the bending speed and pressing force- 1x manual material stop- Free-moving dual footswitch- Machine can be moved with a pallet truck/stacker- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40.0 tchamfer lenght: 1600 mmdistance between columns: 1200 mmcolumn arm: 200 mmram stroke speed: 60.0 mm/secreturn speed: 80. mm/secwork speed: 60.0 mm/secwork stroke: 100 mmtable height: 760 mmtable width: 150 mmoil volume: 130 ltr.voltage: 400 VoltControl: ESA E21 total power requirement: 4.0 kWweight: 3030 kgrange L-W-H: 2050 x 1800 x 2030 mm Demonstration/demo machine () From our showroom (like new) With very few operating hoursFurnishing:- compact hydraulic press brake- BERNARDO NC control model E21- swiveling control panel- electrical adjustment of the backgauge- Back stop on recirculating ball spindles- electrical adjustment of the immersion depth- Laser protection device in front- Upper deer foot tool - divided- Tool holder with quick change system- Universal die block- side + rear protective device- 2x front support arms- movable double foot switch (operation)The data ...

pressure: 20.0 tstroke: 185 mmflat steel: 200 x 12 mmworking feed: 10.0 mm/secreturn speed: 10.0 mm/minwork height max.: 930 mmtable:: 480 x 1060 mmtotal power requirement: 2.2 kWmotor: 400 Volt 50 Hzoil volume: 12.0 ltr.weight: 530 kgrange L-W-H: 1150 x 480 x 1400 mmFurnishing :- electro-hydraulic horizontal bending machine- large, robust machine table made of hardened steel- Machine made of hardened and ground forged steel- Digital display for stroke setting Programming of 1x bend end point & 1x retract point possible- 1x tool set (1x bending punch / 1x 1V die)- infinitely variable adjustment of the bending speed and pressing force- 1x manual material stop- Free-moving dual footswitch- Machine can be moved with a pallet truck/stacker- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 tchamfer lenght: 3050 mmdistance between columns: 2550 mmajustment speed: 90.0 mm/secworking feed: 10.0 mm/secreturn speed: 75.0 mm/secstroke: 140 mmdayligth: 375 mmcolumn arm: 250 mmtable width: 90.0 mmwork height max.: ca. 950 mmNumber of working hours: 14.100 htotal power requirement: 13.5 kWweight: 8500 kgrange L-W-H: 3630 x 2300 x 2505 mm From a maintenance workshop Good / well-maintained condition With only approx. 14.100 operating hours ()Equipment:- CNC electro-hydraulic press brake- DELEM CNC control - model DA 58 Swiveling control panel, front left 2D graphic programming & product display Tool & program library- CNC-controlled axes: Y1+Y2 / X1+X2 / R1+R2 / Z1+Z2 / CNC crowning- CNC electro-motorized backgauge (X axes) Stop system with 2x CNC-controlled gantries- CNC electro-motorized height adjustment of the backgauge (R axes)- CNC electro-motorized adjustment of  ...

pressure: 125 tchamfer lenght: 3100 mmdistance between columns: 2550 mmthroat: 250 mmstroke: 120 mmajustment speed: 70.0 mm/secworking feed: 7.0 mm/secreturn speed: 60.0 mm/secdayligth: 325 mmtable width: 180 mmwork height max.: 915 mmoil volume: 150 ltr.total power requirement: 12.5 kWweight of the machine ca.: 9100 kg.range L-W-H: 3200 x 1325 x 2470 mm well-maintained condition from a maintenance workshop ()Equipment:- simple, conventional electro-hydraulic press brake with torsion shaft for parallelism of the upper beam- electro-motor-driven back stop, with ball screws (X axis) with 2x manually adjustable stop fingers fine adjustment via handwheel at the front, with analog position display- electro-motor-driven adjustment of the immersion depth (Y1+Y2 axis) with digital position display- swiveling operation, left-hand side- split deer foot + pointing tool- 1x rotatable Multi V univers ...

pressure: 175 tchamfer lenght: 3100 mmdistance between columns: 2600 mmcolumn arm: 410 mmram stroke speed: 160 mm/secwork speed: 10.0 mm/secreturn speed: 120 mm/secwork stroke: 265 mmdayligth: 480 mmtable height: 900 mmtable width: 90.0 mmoil volume: 230 ltr.voltage: 400 Volttotal power requirement: 18.5 kWweight: 10500 kgrange L-W-H: 4100 x 2000 x 2820 mm Demonstration/demo machine () from our exhibition (like NEW) with very few operating hoursALPMAC manufacturer video:https://www.youtube.com/watch?v=_FxXyPAcxlEhttps://www.youtube.c om/watch?v=YfkX9RwWv_0ALPMAC product video Model B:https://www.youtube.com/watch?v=lmT1tfy43WE------------------------- --------------------------------MODEL SERIES B175-3100 - CNC electro-hydraulic press brake with: increased installation height increased cylinder stroke increased projection---------------------------------------------------------! MANUFACT ...

pressure: 56.0 tchamfer lenght: 1400 mmdistance between columns: 1300 mmthroat: 220 mmstroke: 200 mmdayligth: 485 mmwork speed: 8.0 - 10.0 m/minreturn speed: 35.0 mm/secControl: CNC Boschert back stop - adjustable: 0 - 370 mmwork height max.: 915 mmCylinders :: 2 Stückvoltage: 3x 400 Vconnected load: 8.0 kVAweight: 3700 kgrange L-W-H: 2320 x 1280 x 2030 mm very good / well-maintained condition () with lots of bending tools- in checked conditions - machine video -https://www.youtube.com/watch?v=NrpZs6Ar0VoEquipment:- NC electro-hydraulic press brake- BOSCHERT NC control unit, front- NC electro-motorized back stop (X axis) with 2x manually adjustable stop fingers (R+Z axis)- AMADA PROMECAM (SYSTEM A) upper tool holder- AMADA PROMECAM (SYSTEM A) lower tool holder- Handwheel with analog display for adjusting the bending angle- lots of insert tools, including tool cabinet- 1x working cylinde ...

Presse plieuse avec presse à cellules robotisées Stäubli Fabricant : LA G Modèle : GBS R 1250 50 La machine n’a été utilisée que pendant une très courte période.

CONTROLS  PC controller BECKHOFF PRESS DESIGN  drive system: servohydraulic   frame design: H-frame, tie rod   quick die change system: yes   feedstock transport direction: left to right SLIDE  total force (nominal): 1100 to  stroke: 130 mm  stroke rate (max.): 60 /minCOUNTER RAM  nominal force: 330 to  stroke: 40 mmV-RING  nominal force: 500 to  stroke: 40 mmTOOL DIMENSIONS  lower table (left-right): 960 mm  lower table (front-back): 960 mm  upper table (left-right): 960 mm  upper table (front-back): 960 mm  shut height max.: 470 mmOVERALL SPECIFICATIONS (COIL LINES)  sheet width max.: 500 mm  sheet thickness max.: 16 mm  coil weight max.: 8 to  feedstock transport direction: left to right COIL CHAIR  coil weight max.: 8 to  stroke: 700 mmDECOILER  coil weight max.: 8 to  max. diameter of coil: 1800 mm  mandrel expansion range from: 47 ...

pressure: 1000 tdistance between columns: 5000 mmstroke: 500 mmHeight of centres: 400 mmMotor output: kWreus: U/minOverall size: 6000 x 2500 mmWeight: 1000 kgDistance between centres: 3500 mmtotal power requirement: kWweight of the machine ca.: 220 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pression : 200 tlongueur de la table : 1600 mmlargeur de la table : 1300 mmlumière du jour : 1700 mmpuissance totale requise : kWpoids de la machine env. : 19 tdimensions de la machine env. : 2,95 5 6 mLes données de cette annonce ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.

Working width: 2500mm, max. sheet thickness aluminium/steel/stainless steel: 3mm/2mm/1.25mm, feeding length range: 575mm-2500mm, feeding width range: 210mm-1500mm, max. bending height: 200mm, max. negative bend: 35mm, max. diagonal twist: 3300mm, rotary table position: 0°/90°/180°/270°, working height: 1150mm. Clamping stroke: 210mm, clamping force: 240kN, clamping lowering and return speed: 50mm/s, upper beam swivel range: 135°, upper beam swivel speed: 90°/s, lower beam swivel range: 135°, lower beam swivel speed: 90°/s. Machine dimensions X/Y/Z: approx. 4050mm/1600mm/2400mm, weight: approx. 13000kg. Documentation available. An on-site inspection is possible.

PRESS DESIGN  système d'entraînement : hydraulique châssis conception : cadre en   C, unilatéral FORCES  DE PRESSION Force totale (nominale) : 12 toCOURSE SLIDE   : 200 mmCARACTÉRISTIQUES ÉLECTRIQUES  tension secteur : 380 V  fréquence secteur : 50 HzDIMENSIONS / POIDS  Poids total env. : 1000 kgCompteur horaire : 30'181 hlast contrôle de sécurité : 27.07.2023, temps de course 38 ms, distance de course 60 mm