presses machines d'occasion à vendre (1,821)

pressure: 400 tdistance between columns: 600 mmstroke: 600 mmtable-size: 3000 x 1500 mmtravel x / y: 2200 x 900 mmworking feed: 7 mm/sectank capacity: 66 lworking pressure: 30-250 bartotal power requirement: 18,5 kWweight of the machine ca.: 25 tdimensions of the machine ca.: 3500 x 3500 x 3700 m2. STANDARD EQUIPMENTFRAME- Welded steel frame- Frame and plates are precision-milled using a CNC milling machine- Chrome-plated cylinder- Worktop with threaded holesHYDRAULICS- Bosch Rexroth hydraulic pump- Hydrapack or Badestons hydraulic directional control valve- Hydraulic block in accordance with EN standards- 1000-liter hydraulic oil tank- Pressure adjustment via pressure transmitter/regulatorELECTRICS- Control cabinet in accordance with EN standards- All cables are labeled and clearly arranged- All electrical components are from SiemensCONTROL PANEL- Stroke control in any position- X, Y, a ...

Une presse plieuse Promecam plus ancienne est disponible. Force de pression : 100 t, longueur de flexion : 4000 mm, gorge : 400 mm, course : 100 mm, hauteur d’installation : 300 mm, poids : environ 8500 kg. Une inspection sur place est possible.

À VENDRE : PRESSE D’ESTAMPAGE À GRANDE VITESSE BRUDERER BSTA 50USL Avec chargeur automatique de bandes BBV 190 500 kN | 100 à 1120 spm | Entièrement automatique | Qualité suisse de premier ordre Points forts techniques : Force nominale : 500 kN Cadence de course : 100 à 1120 coups par minute Heures de travail : 41000 h Moteur principal : 22 kW Tension de commande : 24V DC Connexion électrique : 400V / 50Hz / 62 kVA Course réglable : 16 / 19 / 25 / 32 / 38 /44 / 51 mm Réglage de la hauteur de fermeture : 64 mm Dimensions de travail : Largeur maximale d’installation de l’outil : 1100 mm Largeur de passe de bande : jusqu’à 256 mm Surface du vérin : 980 × 420 mm Surface de la table : 1080 × 650 mm Hauteur d’entrée de la bande réglable : 60–140 mm Largeur maximale de la bande : 120 mm Pas d’alimentation maximal : 85 mm Épaisseur maximale ...

Une presse plieuse CNC Promecam (Amada) APX 103 est disponible. Force de pression : 1000 kN, largeur de travail : 3000 mm, distance entre les colonnes : 2550 mm, ouverture de l’espace : 370 mm, course : 100 mm, profondeur de la colonne : 400 mm, vitesse d’entrée : 70 mm/s, vitesse de pliage : 9 mm/s, vitesse de retour : 85 mm/s, puissance d’entraînement : 10,5 kW. Dimensions de la machine X/Y/Z : env. 3500mm/2200mm/2300mm, poids : env. 6400kg, commande : Amada Opérateur, heures de fonctionnement : 36261h. La presse est toujours en marche, donc les heures de fonctionnement changent continuellement. Documentation disponible. Une inspection sur place est possible.

pression : - TGorge : - mmcourse : - mmpuissance totale requise : - kWpoids de la machine env. : - tdimensions de la machine env. : - m

pressure: 2,5 kNstroke: 45 mmthroat: 90 mmWorking height from to: 80 - 220 mmtable surface area: 120 x 60 mmweight of the machine ca.: 22 Kgdimensions: 160 x 230 x 390 mmHand presses with rack HZ 250The power is transmitted via a rack and pinion construction. she findstheir use where during the working process a constant pressureis needed.Precisely manufactured, spindle hardened and ground, unlimited service lifeLong spindle guide, optimal pressure performance,T-slot according to DIN 650 milled in the middle, sliding blocks fit exactly.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 500 kNstroke: 40 mmthroat: 73 mmWorking height from to: 60 - 150 mmtable surface area: 115 x 70 mmweight of the machine ca.: 10 Kg.Toggle lever hand press SPECIAL OFFER!• Working height adjustable by simply loosening the clamping screws on the stand• Working height fine adjustment for HK 800 = adjustment of the press head to the desired working height. The fine adjustment takes place forced in both directions via a threaded spindle• Hand lever arranged in a user-friendly manner, return via springThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 tdistance between columns: 650 mmstroke: 200 mmtotal power requirement: 30 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pression : 500 tLargeur de passage : 750 mmcourse : 120 mmpuissance totale requise : 57 kWpoids de la machine env. : 16 tdimensions de la machine env. : m

pressure: 75 tthroat: 280 mmstroke: 303 mmtotal power requirement: 15 kWweight of the machine ca.: 7000 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A dismantled Mecamaq hydraulic press is available. Pressing force: 100t, max. pressure: 290bar, main piston diameter: 200mm/120mm, auxiliary cylinder diameter: 40mm/25mm. Main cylinder working stroke: 500mm, max. installation height: 800mm, working height: 800mm, effective dimensions X/Y: 700mm/500mm, table dimensions X/Y: 800mm/500mm, working speed: 6mm/s, return speed: 150mm/s. Max. tool dimensions X/Y: 800mm/600mm, max. tool weight: 1000kg. Machine dimensions X/Y/Z: approx. 1000mm/1350mm/2750mm, weight: approx. 4000kg. Documentation available. On-site inspection is possible.

pressure: 8,5 kNstroke: 40 mmthroat: 95 mmWorking height from to: 95 - 240 mmtable surface area: 160 x 110 mmspindle diameter: 25 mmweight of the machine ca.: 27 Kgdimensions: 160 x 230 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 8,0 kNstroke: 40 mmthroat: 90 mmWorking height from to: 50 - 200 mmtable surface area: 120 x 160 mmweight of the machine ca.: 22 Kgdimensions: 160 x 230 x410 mmKnee lever hand press with fine height adjustment SPECIAL PRICE!• Working height adjustable by simply loosening the clamping screws on the stand• Working height fine adjustment for HK 800 = adjustment of the press head to the desired working height. The fine adjustment takes place forced in both directions via a threaded spindle• Hand lever arranged in a user-friendly manner, return via springThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 4,5 kNstroke: 40 mmthroat: 95 mmWorking height from to: 95 - 240 mmtable surface area: 160 x 110 mmspindle diameter: 25 mmweight of the machine ca.: 24 Kgdimensions: 160 x 230 mmDirect-acting pneumatic pressesbring the full pressure performance over the entire stroke length. You will above allused when long-stroke parts are machined with constant forceNeed to become.Convincing technology• Long and precise spindle guide for maximum dimensional accuracy• Hardened and ground piston rod for practically unlimited service life• Double-acting cylinders with end position cushioning on both sides• Double guide rings in the piston, constant and quiet running• Oil resistant sealing elementsSpecial features of the PND series• Spindle secured against twisting• Spindle return on the PND 85/S only via a cylinder chamber additional air savings• Easy, quick and prec ...

Force de compression : 1000kN/100t, course du vérin : 200mm, pression de service max. : 290bar, contrôle : DNC70, distance de sécurité : 166mm, temps de dépassement : 104ms, distance de dépassement : 7mm.

Force de pression : 2000kN, largeur de travail : 3100mm, passage de la colonne : 3240mm, course max. : 400mm, profondeur de gorge : 250mm, hauteur d’installation max. : 965mm, axes NC : 11, volume hydraulique : 550l, dimensions de la machine X/Y : env. 4400mm/3400mm, poids : env. 16600kg, contrôle : Cyb-Tech Infinitron. Documentation disponible. Une inspection sur place est possible.

Pression : 10 tDistance entre les colonnes : 260 mmLumière du jour : 210 mmSurface de la table : 275 x 260 mm

Machining center and extruded profile plant for car sill production, consisting of:, Processing machines:, - Anger machine SP2-X2000 (machine number AA100264-11), - Anger machine SP2-X2000 (machine number AA100264-12), - 2x coolant treatment, Assembly of components (robot cell for sills):, - Robot 1 KUKA KR120 R3200 PA, - Gripper for robot 1, - Labeling station, - Robot 2 KUKA KR120 R3500, - Gripper for robot 2, - Robot/machining center interface, - Cleaning unit for components, - Assembly machine 2 lanes, - Robots 3 and 4 for handling, - Drawer system with parts inserts, - Screwing station, - Adhesive application station, - Platform, - Robot 5, - Gripper for robot 5, - Pallet parking space, - Safety enclosure, - Electrical control and integration, Further information on request.

nominal power: 63 tstroke rate in continuous stroke: 90 minforce: 2200 NmTorque: 12500 NmLabour performance: 5,5 kWsheet thickness - max.: 6,3 / 3,2 mmcutting surface: 1600 mm²distance between columns: 320 mmthroat: 315 mmmin. ram stroke: 8 mmmax. ram stroke: 120 mmram adjustment: 70 mmram surface: 400 x 500 mmtool hole in ram: 40 mmtool shank hole (depth x diameter): 92 mmT-slots: 2 Stktotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 tpassage width: 1350 mmstroke: 300 mmtotal power requirement: 16 kWweight of the machine ca.: 10 tdimensions of the machine ca.: 2,0 x 1,8 x 3,4 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pression : 500 tLargeur de passage : 750 mmcourse : 120 mmpuissance totale requise : 57 kWpoids de la machine env. : 16 tdimensions de la machine env. : m

pressure: 10 tdistance between columns: 500 mmstroke: 200 mmtotal power requirement: 10 kWweight of the machine ca.: 4.500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pression : 125 tDistance entre les colonnes : 1050 mmCourse : 250 mmPuissance totale requise : 40 kWPoids de la machine env. : 8,5 tDimensions de la machine env. : m

pressure: 34,0 kNstroke: 40 mmthroat: 130 mmWorking height from to: 80 - 240 mmtable surface area: 190 x 140 mmspindle diameter: 30 mmweight of the machine ca.: 80 Kgdimensions: 375 x 200 mmToggle pneumatic pressesincl. working height fine adjustment via bevel gear with lateral crankcomfortable and easily adjustable.Toggle lever pneumatic presses are to be used when the maximumpressure is required shortly before the end of the stroke, e.g. when assembling, punching,embossing, caulking, etc.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 tthroat: 360 mmstroke: 560 mmtotal power requirement: 33 kWweight of the machine ca.: 6000 kgdimensions of the machine ca.: 2000x2400x3650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pression : 10 tCourse : 200 mmTaille de la table : 450 x 450 mmVitesse de travail : 10 mm/ sec.Hauteur de travail max. : 940 mmHauteur de l’outil max. : 150 mmPuissance totale requise : 1,1 kW : 150 x 6 mmPoids : 0,4 tDimensions : 1,15 x 0,5 x 0,9 mmCintreuse horizontale avec :- Commande CN- Double pédale de commande- Jeu d’outils standard

pressure: 200 tstroke: 400 mmdaylight longitudinal/sideways: 1300 /450 mmdayligth: 900 mmtank capacity: 75 lliter capacity: 22 lfeed down: 6,9 mm/secfeed up: 12,6 mm/secMotor output: 7,5 kWweight of the machine ca.: 2,1 tdimensions of the machine ca.: 2,0 x 0,75 x 2,8 mPresses can be operated both by hand and by motor.Cylinders can be moved sideways.Safety valve with cylinder end position.CE marking2 year guaranteeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 tstroke: 400 mmtable surface area: 920 x 540 mmMotor output: 2,2 kWliter capacity: 9,0 ldayligth: 800 mmtank capacity: 31 ldaylight between the columns: 920 x 300 mmweight of the machine ca.: 0,725 tdimensions of the machine ca.: 1,45 x 0,85 x 2,45 mHand and Motor operated.Side-sliding cylinder.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pression : 40 tNombre de courses : 500 Moyeu/minLargeur de la feuille : mmPuissance totale requise : 5,5 kWPoids de la machine env. : tDimensions de la machine env. : m

pression : 40 tLongueur de la table : 670 mmLargeur de la table : 570 mmPuissance totale requise : kWPoids de la machine env. : tDimensions de la machine env. : m