machines de boissons machines d'occasion à vendre (2,158)

Overview  The empty bottle inspector was built in 2004 by the German manufacturer Krones. It is installed in a mineral water company in Germany. On the line, where it is installed, the owner also does contract bottling. Therefore it has many detections and formats available. Technical details  Output: up tp 50,000 bph Last used for:  0,25 l Vichy bottle 0,5l Set 1 0,5l Set 2 0,5l Set 3 0,7l GDB 0,75l GDB Inspection modules Bottom inspection camera Sealing surface inspection camera Thread inspection camera with cone optics Side wall inspection camera Contour detection and color detection with camera Accessories/scope of delivery    Ejector some spare parts available some conveyors

Overview The brewhouse, including fermentation and storage tanks and a KEG washer, was built in 2013 by the Austrian manufacturer Flecks. The whole equipment is in a very good condition and can be visited. Equipment Mash and brew kettle incl. whirlpool function, agitator, stainless: 1.000 L net Lauter tun, stainless: 1000 L net Calandria system (outdoor cooker), electrical heating, stainless. Integration of existing gas, heating + electrical: 72 kW Vapour-condensation system Whirlpool- system Mash and wort pump: 2,2 kW Hot water tank with electrical heating, stainless: 1000 L, 9 kW Wortcooler GEA 2-stages pT 100, electron. Thermometers Incl. all pipes, fittings, valves in stainless. Full automation upgrade: electrical switch board for full automatic process control switches, fuses: 100 kW Main connection 400 V Emergency switch PC-databus and modem Visualisations and automation software  ...

Overview: Manufactured in 2004 by the German company Dr. Datz Maschinenbau GmbH, this reliable 24-head wire bail capper is designed for securely sealing wire bail closures on bottles. A high-quality German-built machine, ideal for efficient and precise capping operations in bottling lines. Technical Details: Manufacturer: Dr. Datz Maschinenbau GmbH Type: BVM 24R Year of Manufacture: 2004 Number of Capping Stations: 24 Closure Type: Wire bail closures Machine Direction: Left to right

Overview  This complete filling line was designed for NRW and Euro bottles as well as crates and pallets and offers an output of up to 7,500 bottles per hour. The machines are from different years of construction between 1992 and 2022 and have few operating hours. The line is still in operation until the end of May and can be viewed in person. Technical details Output: Up to 7,500 bottles/hour Bottle formats processed: 0.33L & 0.5L (NRW, Euro, Ale) Crate formats processed: NRW and Euro crates Scope of delivery Palletizer | Flema | Star C-LC | 1996 (500 crates/h) Unpacker | RICO | UNO 1-head 124 | 2010 (350 crates/h) Decapper/decapper | ADELSKI | PPE 2005 | 1995 (2,000-12,500 bph, 8,500 operating hours) Bottle washer | PAC | CB 14-0.5l-R-7 LII Compact | 1998 (7,500 bph, 14,175 operating hours) Bottle inspector | SYSCONA | LC 10 FD | 2007 (caustic control & metal detection) Filler | ICS | ...

Overview The ABE GLASSPAK 66 is an isobaric filler that is currently in operation and can be viewed. The machine was manufactured by American Beer Equipment (ABE) in the USA in 2018. It has a maximum output of 4,000 bottles per hour for 0.33-liter bottles. The system is designed for 26 mm crown corks and has 18 filling stations. Technical details  Output: 4,000 bottles/hour (for 0.33-liter bottles) Type of closure: 26 mm crown cork Formats: 0.33L Filling stations: 18 Electrical specifications: Max. Voltage: 208-240 V Total current draw: 38.5 A Maximum motor current: 10.6 A Phase: 3-phase Frequency: 60 Hz

Overview This Gravity Filler for Cans was manufactured in 2022 by Italian company Emma. The machine has never been used and is immediately available. It is designed for small-scale can filling, particularly suited for 15 cl and 25 cl slim cans, with manual loading and a production speed of up to approx. 600 cans per hour. Technical data Capacity: approx. 600 cans/h Formats: 15 cl slim, 25 cl slim Dimensions: L.1480 mm x W.850 mm x H.1800 mm (max. 3000 mm) Weight: 350 kg Power: 0.8 kW Air consumption: 190 Nl/min Operating pressure: 6 bar, dry and non-lubricated air Voltage: 220 V (Single-phase) Frequency: 50 Hz Auxiliary voltage: 24 V DC Ambient temperature: 2 °C to 40 °C

Overview This KeyKeg filling machine, MICROMAT M1/1‑F KeyKeg, was manufactured in 2013 by Germany m+f KEG Technik. The machine is designed for filling KeyKegs and was used in a brewery. The equipment is no longer required by the seller and can be visited at any time on request. Technical data  Formats: KeyKeg Application: KEG filling Operating pressure: 5.5 bar Electrical supply: 230/400 VAC Control voltage: 24 VDC Frequency: 50 Hz  

Overview The bottle washer Sirio 7 from the German manufacturer MAG was built in 1995. Maintenance was carried out regularly by MAG. The machine can be inspected and tested in person. Technical details  Capacity up to 7,000 bph Bottle cells for 1.0 liter bottles (smaller bottles can also be used, but additional insertion plates are required) Diameter of bottles: 78 - 90 mm Bottle height: 288 - 310 mm Bottle cells per row: 10 Dimensions (LxWxH): 7,880 mm x 3,045 mm x 3,325 mm Empty weight: 14,300 kg Full load weight: 25,600 kg Installed power: 20.85 kW Heating system: Steam 3 bar

Overview  This semi-automatic can filling machine was built in 2020 by the Italian manufacturer EMMA SRL and is in excellent condition as it has been regularly serviced by the manufacturer. The machine is immediately available and is being sold due to a capacity expansion by a larger model from the same manufacturer. Technical details Output: approx. 350-400 cans per hour Formats: 330 ml (Sleek); format parts for 440 ml included Filling system: Isobaric with CO₂ pre-ventilation, CO₂ tunnel, CO₂ lid gassing Seaming: Integrated single-head can seamer Power supply: 0.8 kW, 220V, 50 Hz Compressed air consumption: 180 L/min at 6 bar Dimensions (L x W x H): 1100 x 1130 x 1160 mm Weight: 280 kg

Overview This filling line for carton packaging from 1999 consists of a SIG Combiblock filler, accumulation system, straw applicator, shrink tunnel, and carton packer. The line currently fills juices into carton packs. The machines will be in operation until the end of June and can be viewed in person at any time. Technical details Output: 12,000 bottles per hour Volume: 200ml Packaging: cardboard, CB7 (feeder) Format shrink tunnel: 2x5 Carton packer format: 30 pack / 60 pack Machine list Filler | SIG | Combibloc CFA 712 | 1999 | Operating hours: 112.650 h Vertical accumulation system | Meurer | CM/ VSP 1200 | 1999 Straw applicator | Geyssel Cologne | 432 | 1999 Shrink tunnel | Meurer | CM/ BK 40-T80 | 1999 Carton packer | Meurer | CMT/ TP | 1999

Overview  This fermentation tank package was manufactured between 2012 and 2019 by Oxinox and Slowbeer. It consists of isobaric and atmospheric stainless-steel fermenters with different capacities. Personal inspection is possible. Technical data  Total tanks: 8 units Isobaric tanks: 5 units Atmospheric tanks: 3 units Material: Stainless steel (316-L for Oxinox tanks) Scope of Delivery  Isobaric Fermenter (4x) | Oxinox | Oxi-19 | 2019 | 1,600 L each Atmospheric Fermenter (3x) | Slowbeer | Plano 1200L | 2012 | 1,200 L each Isobaric Fermenter | Oxinox | Oxi Clooper | 2016 | 1,400 L  

Overview  This set of ten stainless steel isobaric tanks was manufactured between 2012 and 2024 by the Spanish company EtD (Talleres Esteban Tolosa). The lot includes five fermenters and three lagering tanks, all pressure-rated at 3 bar. All tanks are in good condition, fully functional, and well maintained. The newer 2024 models have seen minimal use. The tanks can be purchased as a complete set or individually upon request. Technical data  Type: Isobaric fermenting and lagering tanks Manufacturer: EtD (Talleres Esteban Tolosa) Years of Manufacture: 2012 – 2024 Total Units: 10 (7 fermenters + 3 lagering tanks) Working Pressure: 3 bar Material: AISI 304 stainless steel Scope of Delivery  Fermenting Tanks 3× 45 hL (net 45, gross 47) | EtD | 2012 2× 50 hL (net 50, gross 55) | EtD | 2024 2× 50 hL (net 50, gross 55) | EtD | 2020 Lagering Tanks 3× 50 hL (net 50, gross 55) | EtD | 012 ...

Overview  This 5/10hl 3-device brewhouse was manufactured in 2017 by the Austrian manufacturer Labu. The brewhouse has various automation features such as automatic starting, automatic sparging and automatic spent grains discharge. It is currently available for sale, including additional equipment. Technical data  Capacity: 5/10hl Electrical heating: 27kW / 400V (special ceramic heating element) Equipment: 3 appliances: brewing kettle, lauter tun, whirlpool Additional equipment included: Manual filler (wall-mounted) Keg filler 2 fermentation and storage tanks (650L each) 1 fermentation and storage tank (1200L) All tanks from L-Inox, equipped with jacket and cone cooling (3 bar operating pressure, tested up to 4.5 bar) Glycol cooler Plate heat exchanger Scope of delivery  1x 5/10hl 3-device brewhouse (brewing kettle, lauter tun, whirlpool) 1x manual filler (wall-mounted) 1x keg filler  ...

Overview This Mondial LD 8-1 EAGLE/C atmospheric monoblock filling machine was manufactured by Italian manufacturer CIMEC in 2016. It is suitable for filling non-carbonated beverages such as beer with bottle fermentation, lemonade or soda and combines an 8-valve filling station with a single crown capping head. The filler is available immediately. Technical details  Output: 1,800 bottles/h Filling system: Atmospheric Application: Beer with bottle fermentation, still drinks Formats: Longneck 33cl Bottle diameter: 60 mm Bottle height: 227 mm Cap type: Crown cork 26 mm Output: 5 kW Compressed air requirement: 7 bar Dimensions (L×W×H): 165 × 140 × 240 cm

Overview  This isobaric maturation tank was manufactured in 2019 by Spadoni. It is designed for the isobaric and isothermal maturation of beverages under pressure, with a working capacity of 1,200L (12 hL) and a total volume of 1,300L (13 hL). The tank is certified up to 3 bar (PED) and equipped with high-quality fittings and insulation. Further information on request. Technical data  Capacity: Working: 1,200 L / 12 hL Total volume: 1,300 L / 13 hL Pressure: Working pressure: 2 bar Shell: 0.49 bar Factory hydraulic test: 2 bar Certified (PED): 3 bar Material: AISI 304 stainless steel Insulation: 80 mm polyurethane foam on cylinder and bottom head, stainless steel covered Finish: Interior: 2B with polished welds Exterior: brushed grain 120 with polished welds Heads: Klopper type (top and bottom) Cooling: Cooling jacket on the cylinder Manway: Isobaric Ø400 mm, pressure-resistant up to  ...

Overview The filler was built in 2007 by the German company Krones. The machine has been regularly serviced, is still assembled and can be inspected at any time. Technical details Output: 40,000 bph (200 ml) Formats: 200 ml glass bottle 237 ml glass bottle Closure: crown cap Running direction: counterclockwise Inlet/outlet height: 1,150 mm +- 50 mm Filling points: 96 Capping points: 15 Pitch circle diameter: 2,880 mm Pitch: 94 mm Control system: Siemens S7 Energy consumption: 15.17 kW

Overview  This shrink packer was manufactured in 2011 by the Italian company Giemme Thermo. The Giemme SLH is a film-only shrink wrapping machine used for secondary packaging of multipack PET bottles (1.5 L format). The machine is equipped with two parallel lanes, allowing high throughput and flexibility in packaging configurations. The machine is no longer in production but still installed and will be available from December 2025. A set of spare parts is included, and dismantling and truck loading can be quoted separately. Technical data  Capacity: 20 cycles/min Formats: 2 × (3 × 2) × 1.5 L 6 × (2 × 1) × 1.5 L Application: Cider, lemonade, soda, carbonated beverages Power Supply: 40 kW Dimensions (L × W × H): 650 × 170 × 250 cm Configuration: Dual-lane infeed for higher flexibility Film Type: Shrink film only (no tray) Condition: Very good; still installed and connected Avai ...

Overview This ALWID Matador-HV linear filling machine was manufactured in 1997 and is designed for filling liquid products into various bottle formats in small to medium production environments. The machine operates with a high-vacuum filling principle, enabling level-controlled filling and ensuring consistent fill heights. The filler is equipped with five filling stations and achieves a capacity of approximately 1,000 bottles per hour at 0.7 L. One advantage of the system is that the filler itself does not require format parts, allowing flexible processing of different bottle sizes. The associated capping system can process both PP screw caps and swing-top closures (grip corks). For this purpose, the machine includes two cap sorting bowls, one for each closure type. Approximately ten format sets are available for the capper, covering round and square bottles from 0.2 L to 1.0 L. With it ...

Overview This rotary labelling machine (cold glue + self-adhesive) was manufactured in 2011 by Germany GERNEP. The machine is designed for high-speed labelling of glass bottles, particularly in the spirits industry. It combines cold glue and self-adhesive labelling technologies, allowing flexible application of multiple label types including body, back, neck ring and additional labels. The machine is equipped with 2 cold glue aggregates and 2 self-adhesive labelling units (HERMA). Technical data Capacity: approx. 12,000 bottles/hour Speed range: approx. 3,000 – 18,000 bottles/hour Formats: 700 ml / 750 ml / 1,000 ml glass bottles Application: Labelling of glass bottles (spirits) Configuration: Rotary machine, 2 cold glue units + 2 self-adhesive units (HERMA) Label positions: Body (front), back, neck ring, additional labels Utilities: 400 V Scope of Delivery  Labelling machine | GERNEP ...

Overview  This complete compressed air installation was manufactured between 2009 and 2013 by Atlas Copco (Sweden) and Donaldson Filtration GmbH (Germany). The setup includes two Atlas Copco GA132 VSD low-pressure compressors, one Atlas Copco FD160 VSD air dryer, and one Donaldson UFA-AC0016 oil separator. Designed to deliver reliable and energy-efficient air supply at up to 8.5 bar, this system is ideal for continuous production environments. The installation has been regularly maintained, with full maintenance completed in August 2025, and is in good working condition. The entire system is still installed and connected, and immediately available for inspection and sale. Technical data  Years of Manufacture: 2009 – 2013 Application: Industrial compressed air system Total Capacity: 2 × 24.1 m³/min Maximum Pressure: 8.5 bar Power Supply: 274.8 kW Scope of Delivery  Compressor | Atl ...

Overview The SE 68 B compressor was manufactured by the Belgian company Ateliers François S.A. in 2010. It was used by a big european contract bottler before it was dismantled. It is now located in our warehouse in Germany. Technical data Free air delivery: 2500 m³/h  (43,3 m³/min) Operating pressure: 40 bar Speed rpm: 498 Power: 450 kW Installation type: Mounted on skid with anti-vibration mounts Scope of Delivery  1 × High-pressure compressor 40 bar | Ateliers François  1 × Refrigeration dryer 1 × Electrical control cabinet (CE)

Overview  This complete isobaric filling line was produced in 2014 by the Italian manufacturer Eurostar and is located in Mexico. The line consists of a triblock (rinser, filler and capper), self-adhesive labeler and conveyor belts. It is being sold because a new line with a higher capacity has been purchased. It has already been dismantled. Technical Details  Capacity: Max 6,000 b/h Formats: 0.210L, 0.355L, 0.500L glass bottles 26mm metal crown caps Dimensions: Width: 5,300 mm Depth: 2,630 mm Height: 2,860 mm Weight: 8,000 kg POWER SUPPLY: Main: 460V – 60Hz – 3F+N+T Auxiliary: 24V DC Machine main motor: 4 kW Installed power: 9 kW Scope of Delivery  Triblock (rinser, filler, and capper) Selfadhesive Labeller with 2 stations Conveyors

Overview This carton packing line was manufactured in 1999 by the French company SAVOYE. The line has been professionally dismantled and is currently stored in a closed warehouse. It is designed for the packing of beer and carbonated beverages into various carton configurations and includes all necessary conveyors and technical documentation. Technical data Manufacturer: SAVOYE Models: SAVOYE 15 35, SAVOYE 07 10, SAVOYE 27 15 3B Year: 1999 Capacity: Up to 6,000 bottles/hour Product types: Carton Bottle diameters supported: 70mm, 80mm, 90mm Carton formats: 75cl – 2x(3x2) 75cl – 4x3 Documentation: Available Machine status: Dismantled and stored indoors

Overview The Solo Screw Capper was manufactured in 2004 by the German engineering company Dr. Datz. The machine can process aluminum screw caps. It was used in a bottling line of a mineral water company. The line mainly used for contract bottling and was now stopped, to be sold in parts. Technical Specifications: Number of closing elements: 8 Capacity: up to 20.000 bph Cap type: 28mm aluminum screw cap Working direction from left to right Format: 0,7l GDB bottle

Overview  The Gesete XT 500 bottle drying system was manufactured in 2014 and is designed for drying bottles upstream of a labeling machine (Etima). It removes residual moisture to ensure good label adhesion. Technical details Manufacturer: Gesete Model: XT 500 Year of manufacture: 2014 Application: Bottle drying before labeling (Etima)

Overview  The rinser cleans and sterilizes containers and was built in 2000 by the German manufacturer Krones. The machine has already been disassembled and put into storage.  Technical details  Capacity: up to 32.000 containers/ h  Number of rinsing stations: 50 (some of them are missing)  Running direction: counterclockwise Container: glass + plastic  Wetted parts in V2A  Central lubrication Extensive documentation available Electropneumatic valve control Siemens S7 control Voltage: 400 / 230 V Frequency: 50 Hz Control voltage: 24 V DC

Overview  This complete isobarometric filling line for sparkling wine was manufactured in 2022 by Italian manufacturers DUETTI, GAI, ROBINO & GALANDRINO, WIN&TECH and MAKRO. It is designed for premium sparkling wine in glass bottles and includes depalletizing, rinsing, isobaric filling, capping, wirehooding, capsuling, labelling, CIP and filtration. The line is still in production, has approx. 2,100 operating hours and can be visited on request. It will be available end of March 2026. Technical data Application: Sparkling wine (glass bottles) Capacity: Up to 4,500 bph Formats & Speeds: 0.187 L: 4,500 bph (4°C & 15°C) 0.375 L: 4,500 bph (4°C & 15°C) 0.750 L: 4,000 bph (4°C) / 2,900 bph (15°C) 1.500 L: 2,000 bph (4°C) / 1,500 bph (15°C) Operating hours: 2,100 Scope of Delivery  Depalletizer | DUETTI | M Automatic | 2022 | — Rinser–Filler–Capper Monoblock | GAI | 4033 (16 ri ...

Overview The bottling line is located at a German winery and is no longer in operation. It is available because the seller has purchased a larger plant. Bottled were 1l Schlegel bottles with MCA closure.  Plant in detail  Bottle cleaning  Manufacturer: SeitzEnzingerNoll Year of construction: 1988 Type: TAUCH + STELLA  Drying tunnel Manufacturer: SeitzEnzingerNoll Year of construction: 1987  Type: REGA1  Filler  Manufacturer: Sen compacta-h 12 bottle cells Few operating hours  Screw capper  Manufacturer: Adelski  Year of construction: 1998 Type: PP2001 S MCA capper Labeler Manufacturer: MAG  Year of construction: 2000  Sorting table  Transport

Overview  This cold glue labeller was manufactured in 2008 by the German company Gernep. The machine is designed for applying labels using cold glue technology and is immediately available for sale. Technical data  Manufacturer: Gernep Model: Labetta 4/3/10 640 2A Year: 2008 Direction of rotation: Left-hand machine (bottle plate rotates counterclockwise) Nominal capacity: 14,000 bottles/hour Adjustable from 3,000 - 15,000 bottles/hour 2 cold glue units Label positions: Body, front, back Bottle formats: 0.5L NRW bottle 0.33L Vichy bottle 0.33L Ale bottle

Overview This complete bottling line was manufactured in 2015 by KOSME and consists of a depalletizing system, rinser/filler/capper block, labeling machine, and full conveyance. The line is designed for high-quality beverage bottling using isobaric probe-valve filling technology and is suitable for products such as beer, carbonated beverages, kombucha, and specialty drinks. With a compact rotary layout and a capacity of up to 135 bottles per minute, the line offers an efficient and hygienic solution from depalletizing to labeling. The equipment becomes available as the line has been dismantled and prepared for shipment. The goods can be delivered to Port of Rotterdam (Incoterms 202) upon request. Technical Data  Capacity: up to 135 bottles per minute (BPM) Bottle formats: 12 oz (installed) with change parts for 22 oz / 24 oz Filling product: beer, carbonated beverages, kombucha, functio ...