machines de boissons machines d'occasion à vendre (2,158)

Aperçu L’étiqueteuse a été construite en 2004 par le fabricant italien KOSME. La machine est en bon état, déjà démontée professionnellement et stockée dans un entrepôt. Deux stations de colle froide. Une étiquette, une seule étiquette manche, une étiquette de comptoir + une station adhésive. L’étiqueteuse fonctionne dans le sens antihoraire Détails techniques Capacité : 6 000 bph Stations d’étiquetage : 2 colle froide 1 autocollante

Overview This stretch blow molding machine was manufactured in 2014 by Urola. The machine is designed for the production of PET containers with a 2-cavity mold configuration. Technical data  Capacity: Maximum 3,200 bph Formats: Maximum container dimensions 120 mm diameter × 350 mm height Application: Production of PET containers Configuration: 2 cavities Installed Power Preform rotation motor: 0.18 kW Clamping press motor: 7.5 kW Stretching motor: 3.0 kW Transfer arm motor: 1.3 kW Preform heating oven: 32.0 kW Preform feeder: 0.36 kW 24 VDC power supply (10 A): 1.0 kW Air reflector fan: 0.75 kW Neck cooling fan: 0.75 kW Lubrication pump: 0.07 kW Container evacuation: 0.09 kW Intermittent chain rotation: 0.18 kW Cooling Circuit Water inlet temperature: 10–20 °C Water consumption: 2 m³/h Operating pressure: 4 kg/cm² Cooling capacity: 10,000 kcal/h Pneumatic System – Low Pressure O ...

Overview This isobaric filling machine was manufactured in 1974 by Schilpp. The machine is designed for filling carbonated beverages into 0.33 L long-neck glass bottles under counter pressure. This labelling machine was manufactured in 2019 by ENOS. The machine is suitable for bottles, cans and other cylindrical containers. Technical data  Isobaric Filling Machine – Schilpp Contibloc 20/5 (1974) Capacity: Up to 4,000 bph (depending on carbonation and liquid temperature); additional capacity indication 8,000 bph (not clarified) Formats: 0.33 L long-neck glass bottles (stars available only for this format) Application: Filling of carbonated beverages Configuration: 20 filling valves (long tube design to minimize foaming), 5 crown capping heads Neck finish: 26 mm crown cap Operating pressure: 8 bar Outfeed: Small discharge table (currently connected directly to labeller, no infeed table) ...

Overview The crater was manufactured and taken into operation in 2018 by the German company Sema Maschinenbau GmbH. Till now it was used in a filling line for fresh milk in glass bottles in a German dairy company. The line capacity was 7,700 bph. As the request for milk in bottles was increasing during the lat year, the owner decided to purchase a new line with increased capacity. Therefore this machine has become available. The machine is still in very good condition, as it is still young and only with a low number of operating hours.   Tech Specs: Capacity: 695 crates (of 12 bottles) per hour  1333 crates (of 6 bottles) per hour Formation: 2x3 (1l bottle) 4x6 (0,5l bottle) Gripper heads: for wide bottle neck (can be adapted)    

Overview This complete filling line for returnable glass bottles was manufactured between 1993 and 2004 by several well-known European producers, mainly Klann, Klinger, Krones, Nate, and Datz. The line is designed for high-capacity beverage production, handling up to 20,000 bottles per hour in different formats.  It includes all components from decrater to crater. The line is for it´s age in a good condition. The labelling machine was maintained in 2023 completely. It remains installed and connected and can be inspected upon request. Technical Data Capacity: up to 20,000 bph Bottle Formats: 0.25 L Vichy, 0.5 L Set 1–3, 0.7 L GDB, 0.75 L GDB Application: Water, CSD, or other beverages in returnable glass bottles Condition: Line in good condition Availability: Immediate Status: Still installed and connected   Scope of Delivery Decrater | Otto Fleischer | 1993 Crate washer | Klann | 2, ...

Overview This HORMES crate washer was manufactured in 1992 and was previously installed in a returnable bottle filling line. The machine is designed for the cleaning of beverage crates before they are reused in the filling process. Crate washers are typically positioned upstream of the unpacker in returnable glass bottling lines to ensure that empty crates are properly cleaned before being refilled and returned to circulation. Machines from Hormes are known for their robust construction and long operational lifetime in beverage production environments. The machine is suitable for integration into returnable bottle lines and represents a functional solution for crate cleaning in beverage production systems. Technical Data Manufacturer: Hormes Machine type: Crate washer Year of manufacture: 1992 Application: Cleaning of beverage crates in returnable bottle lines Typical installation positi ...

Overview   This ARCADE GEL 6 bottle washer was built in 2010 by the German manufacturer GM Gera. The machine is still in operation and can be inspected in person at any time. The ARCADE GEL 6 is fully functional and must be replaced due to an increase in performance.   Technical details   Nominal output: 33,000 bph   Control range: 13,200 - 36,300 bph   Chain pitch: 169 mm   Cell pitch: 110 mm   Bottle cells per row: 30 pieces   Total bottle cells: 7,860 pieces   Bottle cells, loaded: 7,680 pieces   Consumption  Compressed air: 1m³   Steam (operation): 489 kg/ h   Steam (heating): 4,430 kg/ h   Electrical power: 48.4 kW   Water: 7.35 m³/ h   Bath volume   Pre-soak: 2,263 l   Pre-caustic: 7,240 l   Caustic 1: 31,755 l   Caustic 2: 350 l   Hot water 1: 350 l  Hot water 2: 350 l   Cold water: 350 l 

Overview  The bottle unscrambler was manufactured in 2021 by the German company ALWID. It is part of a new filling line and can fill chemical products into plastic containers. The machine has ATEX certification, which allows it to handle explosive products. The machine can be purchased with warranty.  Technical data  Capacity  12.000 bph at 50 ml HDPE, oval 43 x 23 x 95 mm  14.000 bph at 250 ml HDPE, Ø60 mm x 126 mm Incl. 2 format sets for processing the above mentioned bottle sizes. Bottle sizes Fully enclosed cabin, machine frame and wall panels in stainless steel Floor frame in mild steel, painted (similar to RAL 9006 silver gray) Quick access due to large doors as well as quickly removable panels Rejection of defective bottles  Easy format changeover due to quick-change system without tools Siemens S7 control system  Bottle loading system with hopper 1000 l, in stainless stee ...

Overview The machine is designed for high-speed wrap-around labeling from the reel. The machine was taken from a production line and is fully functional. It is out of production but available for inspection. Technical Data:  manufacturer: Krones, Germany model: Contiroll HS 810-720     year of manufacture: 2015 neck handling machine, modification possible formats: 1,5L and 2,0L labelling applicators: 1 (wet-glue head), 2 magazines operation Direction: Right-machine,  production Capacity: 50.000/h Worked Labels: IN REEL Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC

Overview This belt press was manufactured in 2019 by SRAML. The machine is designed for the continuous extraction of juice from crushed apples using a continuous belt pressing system. It was operational when taken out of regular production and has been maintained as backup equipment. The machine was replaced by a higher‑capacity press. Technical data  Capacity: 1,500 kg/h (apples) Application: Juice extraction from crushed apples Configuration: Continuous belt pressing system with mechanized self‑cleaning filtration system Filtration system: Mechanized self‑cleaning filter for removal of seeds and stems

Overview  This flash pasteurizer was manufactured in 2001 by German company Krones / APV. The unit was previously operated in a mineral water production facility in Germany. Following the replacement of the complete line, the machine was dismantled and sold individually. It is available immediately and currently in stock. The reason for sale is a line upgrade. Technical data Type: Flash pasteurizer (short-time heating system) Application: Alcohol-free beverages / mineral water Capacity: Guaranteed throughput up to 22,000 l/h Adjustable down to 10,000 l/h Process design: Plate heat exchanger with regeneration, heating, degassing and cooling sections Integrated degassing unit Buffer tank with internal circulation Electrical connection: 230 / 400 V, 3 Ph, 50 Hz Control voltage: 24 V DC Execution: Stainless steel construction CE-compliant according to EU machinery directives Control & instr ...

Overview  This cold glue labelling machine was manufactured in 2005 by German company HEUFT. The machine is no longer in production use and is now available for sale. It includes two integrated laser coders for date marking and supports a wide range of bottle formats. Ideal for high-speed beverage production environments. Technical data  Capacity: Up to 60,000 bottles per hour Formats: Supports 11 bottle formats From 0,3l - 0,66l Steini, NRW, Longneck Container types: Glass, not transparent, non-contoured Container diameter: 60.4 – 69.1 mm Container height: 174 – 270 mm Label positions: Front (up to 2 labels) Back (up to 1 label) Label size range: Width: 70 – 111 mm Height: 33 – 100 mm Band height: 1100 mm Max. ambient temperature: 40°C Power connection: 400 V Machine design: Straight version, size L (approx. 3360 mm wide) Bottle carousel diameter: 1610 mm Number of bottle pla ...

Aperçu : Cette étiqueteuse à palettes a été fabriquée en 2023 par LOGOPAK. La machine est conçue pour appliquer des étiquettes autocollantes sur les palettes. Elle a été en service jusqu’en septembre 2025 et est actuellement arrêtée, toujours installée, avec l’alimentation coupée. La machine est disponible immédiatement et peut être visitée sur demande. La maintenance était effectuée deux fois par an ; . Données techniques Capacité : max. 100 palettes/heure Application : Étiquetage de palettes (auto-collant)    

Aperçu : Ce nouveau pousse-vitre semi-automatique a été construit en 2017 par le constructeur allemand Alwid. La machine est stockée professionnellement et peut être consultée en personne à tout moment. Détails techniques Nouvelle pousseuse semi-automatique à verre avec unités de prise interchangeables 4 têtes : ajustable selon le motif de couches TABLE D’ALIMENTATION ALWID + DÉPALETTETEUR ALWID

Warehouse Service  for Used Machines  Our storage service extends greater flexibility for both buyers and sellers seeking to purchase or sell used beverage machines. With access to our dedicated warehouse, sellers can improve their resale value by extending the selling cycles, while buyers can take advantage of temporary storage options to better coordinate their used machinery purchases with their delivery requirements. For Sellers  Get your machines out on time and still maximize your resale value: We store your machine as long as it takes to get the best resale value for your asset. Store-And-Sell Option Avoid scrapping Maximize resale values For Buyers  Secure your machine and plan your project with no time pressure: We store your machine as long as you need to set-up your project and be ready for assembly. Buy-And-Store Option Secure purchase opportunities Increase logistics ef ...

Overview  This filler and capper block was manufactured in 1966 by German company H&K (H&K VVF 14/3). The machine underwent a general overhaul in 2016, including extensive mechanical and electrical refurbishments. Additional sealing components were renewed in 2023. Technical data  Capacity: 2,500 bph Formats: Prepared for 0.33 L Longneck Filling temperature: 6°C Overhaul & refurbishment details General overhaul in 2016: Pre-evacuation New rotary ball connection New stainless-steel table New electrics New valve control cabinet in stainless-steel design 0.33 L guiding set Sihi vacuum pump Renewed in 2023: Seals on lifting cylinders and filling valves Vacuum and overpressure valves equipped with new seals and springs

Overview The brewhouse was manufactured in 2017 by the Czech company HANSTEEL s.r.o.. With it, 5 hl can be produced. Technical details Two-chamber brewhouse with electric heating system. Nominal volume: 500l Total volume: 550l Brewhouse is mounted on separate frame with stainless steel stairs and platform Incl. cooler from Alfa-Laval: cooling of 500l in 1h from 99°C to 12°C Butterfly valves on the chimneys Agitators in both vessels with frequency converter to change the speed Strainer bucket with level sensor for automatic water refilling control of the brewhouse via a touch screen display accessible from the working platform the app needed to control the brewhouse can be installed on a portable device (e.g. tablet) and the operation of the brewhouse can be controlled remotely There is also a possibility to offer for sale open fermenting vats with a nominal volume of 1000 l (total volu ...

Aperçu Le mélangeur à deux composants suivant a été construit en 2000 par le fabricant allemand Krones. La machine est disponible immédiatement dans son bon état actuel.  Capacité de données techniques 45 000L/h 2 composants Densimètre Anton Paar adapté aux boissons gazeuses année de fabrication : 2000 SIEMENS contrôle

Overview This sleeve applicator was manufactured in 2005 by the French company Sleever International. The model Powersleeve was used for applying shrink sleeves on two 1.5 L bottles in twin-pack format (2×1.5 L). The machine is still installed and connected but no longer in use, and will be available from December 20, 2025. Technical data Capacity: 12,000 bph Formats: Twin pack (2 × 1.5 L) Application: Cider, carbonated beverages, lemonades, sodas Machine dimensions: 1000 × 155 × 250 cm Power supply: 6 kW Condition: Good, functional when disconnected

Aperçu : Cette laveuse de caisse a été fabriquée en 1997 par la société allemande Klann. Le modèle 1800 N est un système de lavage de caisses à bain unique conçu pour nettoyer des caisses de boissons de différentes tailles à une capacité allant jusqu’à 2000 caisses par heure. Il est toujours installé et disponible immédiatement. Données techniques Capacité : 2000 caisses/heure (pour les caisses GDB, dans le sens de la longueur) Formats de caisses : 12 × caisses de 0,7 L (dans le sens de la longueur) Baignoires : 1 Construction : Acier inoxydable Longueur (totale) : 4 640 mm Largeur : 1 300 mm Connexion électrique : 16 kW Extraction de vapeur

Un système de prémélange à deux composants, H-Falterbaum (Famix), pour la production de boissons gazeuses à partir d’eau et de sirop avec gaz est disponible. Capacité de mélange : 6000 l/h, dégazage : dégazage sous vide, pression maximale dans le récipient : 6,5 bar, dimensions de la machine X/Y/Z : environ 2500 mm/1250 mm/2500 mm, poids : environ 1500 kg. Documentation disponible. Une inspection sur site est possible.

Complete production and filling plant for a pub brewery, consisting of the following components: 1. Milling plant Milling mill with malt feed hopper and pipe chain conveyor system for malt grist. 2. Brewhouse 2-unit brewhouse (Kaspar Schulz, built in 2013) as a brewing block with copper-clad stainless steel vessels. The wort is cooled by a separate plate heat exchanger (API Heat Transfer, built in 2013) with downstream wort aeration. There is also a hot water tank (Kaspar Schulz, 2013) with insulation and heating jacket. 3. Fermentation and storage cellar 4 cylindroconical fermentation and storage tanks (Kaspar Schulz, built in 2013) with a gross volume of 12 hl each and a maximum overpressure of 3 bar. 3 cylindroconical fermentation and storage tanks (Kaspar Schulz, 2013) with a gross volume of 25 hl each and a maximum overpressure of 3 bar. The temperature of these 7 cylindroconical fe ...

Overview This complete filling line for glass bottles is part of a brewery and used for filling beer in 330 ml glass bottles with crown caps. It consists of an automatic glass depalletizer, self-adhesive labeller, filling triblock and a carton packer. The entire equipment was installed in 2017 by Italian manufacturer Framax. All the equipment is still installed and can be viewed in person during production. Technical details  Production capacity: 2,400 bph (at 0,33l) Formats recently used: 0,33l Bottle diameter: 60mm, height is adjustable 26mm crown cap Packaging: 6x4 carton box Scope of delivery Automatic depalletizer | Framax | DEPAL SS-3000 | 2017 Automatic sheet removal Photocells for depalletizer Selfadhesive labeller | Framax | RLA-H06-S3-L3-D480 | 2016 3 stations for 3 labels (front, back, neck) Date/ batch printer Isobaric filler | Framax | Modulblock RFCI-16/16/1-DPS/C | 2016 N ...

Overview  This complete Bag‑in‑Box filling line was manufactured by OETTEL Maschinen GmbH, CERMEX, and PRECIA MOLEN. The line is designed for filling water and syrup into Bag‑in‑Box formats. It was in service until September 2025 and is currently stopped, still installed, with energy disconnected. The line is described as fully operational, is available immediately, and can be visited on request. Preventive maintenance was carried out twice per year; the last maintenance took place in January 2025. Palletizing, stretch wrapping, and pallet labelling equipment were upgraded in 2017 and 2023. Technical data Capacity: 5 L BIB: 650 BIB/hour / 7 pallets/hour 19 L BIB: 420 BIB/hour / 13 pallets/hour Formats: 5 L / 19 L Bag‑in‑Box Application: Water and syrup Configuration: Carton forming, Bag‑in‑Box filling, checkweighing, carton closing, conveying, palletizing, stretch wrappi ...

Overview The decrater, used for unpacking bottles from crates, was manufactured in 2020 by Mühlbauer and is in excellent, like-new condition. It is ideal for automatically unpacking various bottle formats and crate types in the beverage industry. Technical Specifications  Capacity: 8,000 bottles per hour Supported Bottle/Crate Formats 0.50 l Euro bottle / 20-bottle Euro crate 0.50 l Euro bottle / 20-bottle modular crate 0.33 l Gourmet bottle / 20-bottle Euro crate 0.33 l Longneck bottle / 24-bottle modular crate 0.33 l Vichy bottle / 24-bottle modular crate Scope of Delivery  Bottle unpacking unit Mühlbauer Satelite AP-0400-H

Overview This brewhouse was manufactured in 2020 by Chinese company Shandong Yuesheng. It is a 10 hL two-vessel system designed for small to medium-sized breweries, equipped with mash/lauter tun, wort kettle, and an additional 20 hL hot water tank. The brewhouse includes steam heating, integrated pumps, and auxiliary equipment, offering a compact and professional solution for efficient beer production. The unit is in good condition and will be available by the end of April 2026. Reason of the replacement is that they will go to a new 20hl brewhouse. Technical data  Capacity: 10 hL brewhouse, up to 2 batches per day Formats: Beer, up to 20° Plato initial density Vessels: 2 (mash/lauter + kettle/whirlpool) + 1 hot water tank (20 hL) Power supply: 5.5 kW Air supply: 6 bar Construction: SUS304 stainless steel, mirror surface treatment, PU insulation (100 mm), polished welding seams (Ra � ...

Overview  This wrap-around carton packer was manufactured in 2008 by the German company MEYPACK. The machine is in very good condition and was used only occasionally, as the primary packaging method at the facility was plastic crates. It is already dismantled and stored in a warehouse and is available immediately. Technical data  Capacity: 60 packs/minute with 2x5 (10 bottles) 40 packs/minute with 4x5 (20 bottles) Packing type: Wrap-around carton box Carton dimensions: Length: 120 – 300 mm Width: 210 – 400 mm Height: 100 – 350 mm Formation of packs: 2x5 and 4x5 Scope of Delivery  Meypack VP 531WA wrap-around packer

Aperçu Cette machine d’inspection des niveaux de remplissage a été fabriquée en 2017 et la machine d’inspection des labels en 2015 par la société allemande Vision-Tec. La pousseuse était fabriquée par la société allemande BBULL. Il est conçu pour vérifier la hauteur de remplissage, la fermeture et l’étiquette des bouteilles pleines. La machine est en production jusqu’en octobre 2025. Capacité des données techniques : Portée de livraison ajustable Système d’inspection de niveau de remplissage | Vision Tec | Système d’inspection des étiquettes 2017 | Vision Tec | 2015 Système de rejet | BBULL

Overview This PET filling line was manufactured in 2002 by Krones (Germany). The line is designed for carbonated beverages such as beer or lemonades, and also suitable for water with or without CO₂. With an output capacity of up to 12,000 bph (0.5 L), it offers a complete solution from bottle blowing to palletizing. The line is being sold due to modernization of the PET division and replacement with a higher-capacity system. Equipment is in good condition and still fully operational. Technical data  Line capacity: 12,000 bph at 0.5 L 9,000 bph at 1.0 L 8,000 bph at 1.5 L 6,000 bph at 2.0 L Formats: 0.5 L, 1.0 L, 1.5 L, 2.0 L Neck finish: PCO 1810 Max. bottle diameter: 106 mm Products: Beer (+4 °C), Kvass and lemonades (+10 °C), still and carbonated water Labelling: Wrap-around, pre-cut paper labels, hot-melt Secondary packaging: Film only (4×3 and 3×2) PLC: Siemens S7-300 Power su ...

Overview  This Capsuling Machine was manufactured in 2006 by the Italian company NORTAN SRL. This machine was used to apply aluminum cones on 75cl glass cider bottles and includes a cone distributor, cone oven, and cone spinner. It is immediately available, as the production in the facility was stopped in 2022. Technical data  Capacity: 9,000 – 12,000 bottles per hour Formats: 75cl glass bottles (cider, champagne type) Dimensions: L 200 cm × W 150 cm × H 250 cm Application: Cone application (distributor, oven, spinner) Scope of Delivery  Cone distributor Cone oven Cone spinner Operator platforms