machines de boissons machines d'occasion à vendre (1,738)

Overview  This vacuum filler was built in 1998 by Italian manufacturer GAI. In 2024 the machine was fully refurbished and is available immediately.   Technical Details    Effective Capacity: approx. 4,500-5,000 bottles/hour  Machine equipped for the following bottle formats: Bordeaux 75cl (diameter 78mm) - Burgundy 75 - 37.5cl - Magnums  Rinser with 20 clamps, inspected  Filler with 20 taps and vacuum system (new turbine) - taps inspected, new gaskets. New seating springs.  AROL Saturno Capper with 4 heads and vacuum - semi-new jaws in perfect condition - new vacuum pump and circuit  New wine inlet solenoid valve  Plug for feed pump  Machine newly refurbished (solenoid valve, jaws, vacuum turbine, gaskets, vacuum pump)  Electrical supply: 400 Volts / 50 Hz, 3 phases  Dimensions:  Long 380cm x Wide 140cm x High 250cm  Weight: 3500 kg   

Overview  This filling line for non-carbonated beverages in PET bottles was manufactured in 2011 and comprises a filtration system, a filling and capping machine, a labeling machine and a pallet wrapping machine. It is designed for bottle sizes from 1.5L to 5L. The line is being sold as the factory has been closed. All machines are professionally stored and can be inspected on site. Technical details  Filtration system | GYM Internacional | 8000 | 2011 Manufacturer: GYM Internacional Model: 8000 Year of manufacture: 2011 Capacity: 8,000 L/h Power consumption: 4 kW Dimensions: 2,500 x 1,500 x 100 mm Weight: 1,110 kg Bacteriological filtration through housing system Automatic filling monoblock | GYM Internacional | Grupo 9-1. PK | 2011 Bottle formats: 1.5L & 5L PET Output: 1,600 bottles/hour (1.5L) 700 bottles/hour (5L) Filling heads: 9 Capping heads: 1 (screw cap) Bottle diameter: Min.  ...

Overview  This monobloc filler for still water was manufactured in 2013 by the French company Gangloff-Scoma. The machine is designed for atmospheric filling of PET bottles ranging from 0.33 L to 2.5 L, currently configured for 1.5 L bottles with a 29/25 neck finish. The filler operates with a mechanical gravity filling system optimized for still water and can reach an output of up to 38,000 bottles per hour. It remains installed, in working condition, and is immediately available for inspection and use. Technical data  Application: Still water Filling System: Mechanical gravity (atmospheric) Capacity: Up to 38,000 bph Bottle Formats: 0.33 L – 2.5 L (currently set for 1.5 L) Neck Finish: 29/25

Overview  This PET filler was manufactured in 1999 by Germany-based KRONES. It is suitable for filling carbonated soft drinks in PET bottles and is equipped with a Pick&Place neckhandling system. The machine is immediately available and can be inspected upon request. Technical data  Capacity: 27,000 b/h at 1.0l PET 25,000 b/h at 1.5l PET 22,500 b/h at 2.0l PET Formats: 1.0l, 1.5l, 2.0l PET bottles Closure: PCO 1881, plastic screw caps Filling system: Isobaric Number of filling valves: 126 Capper: Screw capper 720-18-126 (Alcoa) Running direction: Right-Left (anti-clockwise) Neckhandling with Pick&Place-System Product: Carbonated soft drinks (8 g/l CO₂, 20°C) Machine pitch: 144 Machine safety: Full guarding – lifting version Control Unit: Siemens S7 Accessories: Krones Checkmat Scope of Delivery Krones Sensometic VP-I-PET filler Screw capper by Alcoa (720-18-126) Krones Checkmat Pi ...

Lave-bouteilles MAG Type Sirio 8 avec 10 bouteilles/rangée Capacité : 3 000 - 11 000 bph Année de fabrication : 1990 Adapté à 0,2 litre. - 1,0 litre. Bouteilles La machine sera disponible à partir de décembre 2026.

Overview This Krones Linatronic M empty bottle inspector, manufactured in 2015, is designed for the reliable inspection of returnable glass bottles in beverage production lines. The system combines multiple inspection technologies including camera-based vision systems, infrared sensors, and high-frequency detection, ensuring the identification of contamination, residual liquids, closure issues, and bottle defects. With a capacity of up to 15,000 bottles and more per hour, the machine is well suited for medium-capacity bottling lines. The unit is equipped with a 3-fold Ecopush rejection system and supports a wide range of bottle types and glass colors, making it a flexible solution for breweries and beverage producers. Technical data Manufacturer: Krones Model: Linatronic M Machine type: Empty bottle inspector Year of manufacture: 2015 Capacity: up to approx. 15,000 bottles per hour and  ...

Overview  This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers, including SIG Corpoplast, KHS, Sacmi, Kisters, Paxona, and others. The line is suitable for still and carbonated soft drinks and includes a blow moulder, filler, labeller, packer, and various conveyor and inspection systems. The line reaches up to 36,000 bph at 1.5L and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data  Capacity: 36,000 bph at 1.5L water 35,000 bph at 1.5L soft drinks (sweet) 32,000 bph at 1.5L soft drinks (light) Formats: 0.5L and 1.5L bottles PCO 28-1881 closure Filling product: Water and carbonated soft drinks (7.5g CO₂) Closure system: Screw caps, fed via chute and tipper (Zalkin + NSM) Packing: Shrink pack: 3x2 bottles (double lane) Pallet type: Eur ...

Overview  This atmospheric semi-automatic can filler from the brand Cask, 2019, is for sale because the owner is closing the business. It is still operational and can be inspected in person. Technical Details  600 cans/hour 2 filling heads CO₂ pre-purge Canning table Formats Slim 163 mL 187 mL 250 mL Sleek 250 mL 355 mL Standard 250 mL 330 mL 355 mL 375 mL 440 mL 473 mL 500 mL Dimensions Length [mm]: 1530 Height [mm]: 2008 Depth [mm]: 646 Power supply: 240 VAC, 50 Hz Scope of delivery includes FIAC SUPER SILENT 59 air compressor (required for lid sealer), 8 bar

Overview This stretch blow molding machine was manufactured in 2014 by Urola. The machine is designed for the production of PET containers with a 2-cavity mold configuration. Technical data  Capacity: Maximum 3,200 bph Formats: Maximum container dimensions 120 mm diameter × 350 mm height Application: Production of PET containers Configuration: 2 cavities Installed Power Preform rotation motor: 0.18 kW Clamping press motor: 7.5 kW Stretching motor: 3.0 kW Transfer arm motor: 1.3 kW Preform heating oven: 32.0 kW Preform feeder: 0.36 kW 24 VDC power supply (10 A): 1.0 kW Air reflector fan: 0.75 kW Neck cooling fan: 0.75 kW Lubrication pump: 0.07 kW Container evacuation: 0.09 kW Intermittent chain rotation: 0.18 kW Cooling Circuit Water inlet temperature: 10–20 °C Water consumption: 2 m³/h Operating pressure: 4 kg/cm² Cooling capacity: 10,000 kcal/h Pneumatic System – Low Pressure O ...

Aperçu Le remplissage a été construit en 2007 par la société allemande Krones. La machine a été régulièrement entretenue, est encore assemblée et peut être inspectée à tout moment. Détails techniques Puissance : 40 000 bph (200 ml) Formats : bouteille en verre de 200 ml Bouteille en verre de 237 ml Fermeture : bouchon à couronne Direction de marche : sens antihoraire Hauteur d’entrée/sortie : 1 150 mm +- 50 mm Points de remplissage : 96 Points de bouchon : 15 Diamètre du cercle de pas : 2 880 mm Pas : 94 mm Système de contrôle : Siemens S7 Consommation d’énergie : 15,17 kW

Overview This rotary cold glue labelling machine was manufactured in 2021 by Germany GERNEP. The machine is designed for cold glue labelling of glass bottles, primarily in the beer industry. It is equipped with one cold glue labelling aggregate and is prepared for the installation of an additional unit. The system features a mechanical bottle table drive (control cam system) and a Krones glue pump for consistent label application. Technical data Capacity: approx. 5,000 bottles/hour Speed range: approx. 1,000 – 6,000 bottles/hour Formats: 0.33 L / 0.5 L glass bottles Application: Labelling of glass bottles (beer) Configuration: Rotary machine with 1 cold glue labelling aggregate (prepared for 2nd unit) Label positions: Body / wrap label, neck / chest label Utilities: 400 V / 50 Hz / GND / N Scope of Delivery Labelling machine | GERNEP | Labetta 4/3/8 480 1A | 2021 | Rotary cold glue lab ...

Overview  This Capsuling Machine was manufactured in 2006 by the Italian company NORTAN SRL. This machine was used to apply aluminum cones on 75cl glass cider bottles and includes a cone distributor, cone oven, and cone spinner. It is immediately available, as the production in the facility was stopped in 2022. Technical data  Capacity: 9,000 – 12,000 bottles per hour Formats: 75cl glass bottles (cider, champagne type) Dimensions: L 200 cm × W 150 cm × H 250 cm Application: Cone application (distributor, oven, spinner) Scope of Delivery  Cone distributor Cone oven Cone spinner Operator platforms

Aperçu Ce remplissage de 5 gallons pour l’eau en embouteillage a été fabriqué en 2003 avec une technologie éprouvée par le fabricant américain Steelhead. La machine est déjà démontée, en stockage et peut être vue en personne. Techn. Capacité des détails : 600 bph

Overview This ENOS Millenium self-adhesive labelling machine was manufactured in 2002 and is designed for the application of pressure-sensitive labels on glass bottles, particularly in wine production environments. The machine is equipped with three labelling stations, allowing the application of front, back, and seal labels. With a capacity of approximately 2,500 bottles per hour, the system is suitable for small to medium-sized production lines. The machine supports Bordeaux and Burgundy bottle formats, with corresponding format parts included. Its modular design and self-adhesive technology provide flexibility for different label applications and bottle types. Technical Data Capacity: approx. 2,500 bottles per hour Labelling technology: Pressure-sensitive (self-adhesive) Number of stations: 3 Applications Front label Back label Seal label Bottle Formats Container type: Glass bottles S ...

Overview This PET filling line was manufactured in 2002 by Krones (Germany). The line is designed for carbonated beverages such as beer or lemonades, and also suitable for water with or without CO₂. With an output capacity of up to 12,000 bph (0.5 L), it offers a complete solution from bottle blowing to palletizing. The line is being sold due to modernization of the PET division and replacement with a higher-capacity system. Equipment is in good condition and still fully operational. Technical data  Line capacity: 12,000 bph at 0.5 L 9,000 bph at 1.0 L 8,000 bph at 1.5 L 6,000 bph at 2.0 L Formats: 0.5 L, 1.0 L, 1.5 L, 2.0 L Neck finish: PCO 1810 Max. bottle diameter: 106 mm Products: Beer (+4 °C), Kvass and lemonades (+10 °C), still and carbonated water Labelling: Wrap-around, pre-cut paper labels, hot-melt Secondary packaging: Film only (4×3 and 3×2) PLC: Siemens S7-300 Power su ...

Overview  This cap feeding system consists of a vertical cap elevator, a centrifugal distributor, and a horizontal flat top air conveyor. The system was used for feeding 38 mm flat plastic caps in PET bottling applications. It has been dismantled, stored in a warehouse, and is immediately available. Technical data  Formats: Flat 38 mm plastic caps Dimensions: L 210 cm × W 75 cm × H 300 cm Power supply: 0.2 kW Application: PET bottles Scope of Delivery Vertical cap elevator | Marmoinox | AML-ZVE1 | 2016 Centrifugal distributor | Sacmi | - | 1997 Horizontal flat top air conveyor, 2 m | Sacmi | - | 1997

Overview This HEUFT Spectrum TX empty bottle inspector was manufactured in 2015 and is designed for the automatic quality inspection of empty glass bottles prior to the filling process. The machine belongs to the HEUFT Spectrum TX series, which uses the manufacturer’s reflexx inspection technology for high-precision bottle inspection. The system detects foreign particles, glass defects, and residual liquids inside bottles, ensuring that only compliant containers proceed to the filling stage. HEUFT inspection systems are widely used in modern beverage production lines due to their reliable optical inspection technology and modular design. The machine was installed in a high-capacity bottling line with a performance of approximately 33,000 bottles per hour, making it suitable for large industrial beverage filling operations. Technical Data Manufacturer: HEUFT Series: Spectrum TX Type: HB ...

Overview This premix beverage mixer was manufactured in 1969 by Stork Jansen & Sutorius N.V. The machine is designed for the production of carbonated and non-carbonated soft drinks as well as carbonated water. It is configured as a multi-tank mixing and carbonation system including product tank, vacuum tank and saturator for consistent mixing and CO₂ dosing. The unit has been fully refurbished in 2020, is currently in operation, and available for inspection. Technical data Capacity: approx. 15,000 L/h Application: Beverage mixing (carbonated and non-carbonated soft drinks, carbonated water) Configuration: Multi-tank system (product tank, vacuum tank, saturator) Operating pressure: up to approx. 6 bar (typical 1.2 – 1.4 bar) CO₂ content: approx. 6.5 – 7 g/l Electrical: 380 V, 3-phase Drive power: approx. 5.5 – 7.5 kW Scope of Delivery  Premix beverage mixer | Stork J ...

Overview  This compact brewing, fermentation and packaging setup was manufactured between 2015 and 2022 by various European manufacturers The installation is designed for beer production in bottles and cans and consists of an isobaric filler, can seamer, small brewhouse, fermentation tanks, refrigeration unit, labeller and steel kegs. The equipment is already dismantled and stored und immediiately available. Technical data Application: Beer (bottles & cans) Filling type: Isobaric Filling & Seaming Bottle formats: 33 cl, 50 cl, 75 cl Bottle output: 350–400 bph (at −1°C to +1°C, 33 cl) Can formats: 33 cl, 44 cl, 50 cl Can output: 350–400 cph (at −1°C to +1°C, 33 cl) Brewhouse Capacity: 650 L Heating: Propane gas Electrical: Single-phase Fermentation & Cooling Total fermentation capacity: 9,800 L Stabilization capacity: 2,940 L Dimensions (refrigeration unit): approx. 1,100 ×  ...

Overview  The labeler was manufactured in 2013 by the German manufacturer Gernep. The machine was regularly maintained by OEM and had a full renovation in the end of 2019. The labeler is already dismantled. Technical details  Output: approx. 8,500 bottles/h   Formats 33 cl Vichy – Longneck – 30 cl BNR ; Neck, front and back label. 2 different front label format parts 33 cl longneck; 75 cl Bierre Belge bottle Corked; Neck, front and back label. Stainless steel bottom frame Rotation: clockwise Right to left bottle transport 5912 running hours Air driven glue pumps replaced by electrical driven glue pumps.

Overview This rotary PET blow moulding machine was manufactured in 2003 by the German company Krones. The S8 model is designed for the production of high-quality PET bottles and adjusted for 1.5 L bottles and neck PCO1881. The machine remains in good operational condition, is immediately available, and can be integrated into existing production lines for beverages such as water, CSDs, or juices. Air conveying system is available. Technical data  Application: PET bottle production Capacity: 14,000 bph year of manufacture: 2003 Bottle Formats: 1.5 L  Neck Finish: PCO1881 center-cooling air conveying system available scope of supply: blow moulder Krones Contiform S8 (2003) cooling unit preform feeding preform container preform tilting device air conveying system available

Overview  This complete brewhouse was manufactured in 2012 and enables the production of 1,000-liter brews. The system works with steam and includes brewing, fermentation and storage tanks. It is immediately available and is currently installed and ready for operation in the production facility. The seller confirms that the system has worked perfectly until recently. The boilers have a copper coating, while the rest of the system is made of stainless steel. Details Wort yield: 1,000 liters per brew Heating system: Steam Current status: Installed and ready for operation Availability: Immediately Scope of delivery  Brewhouse | Mini Brewery System | CI T 10 | 2012 2 kettles (mash tun above the whirlpool as one unit + separate boiling kettle) Steam boiler | Mini Brewery System | - | 2012 (electric) Plate heat exchanger Hot water tank | 1,500 L Reverse osmosis system | ALFA | compact model  ...

Aperçu Cette machine d’inspection des niveaux de remplissage a été fabriquée en 2017 et la machine d’inspection des labels en 2015 par la société allemande Vision-Tec. La pousseuse était fabriquée par la société allemande BBULL. Il est conçu pour vérifier la hauteur de remplissage, la fermeture et l’étiquette des bouteilles pleines. La machine est en production jusqu’en octobre 2025. Capacité des données techniques : Portée de livraison ajustable Système d’inspection de niveau de remplissage | Vision Tec | Système d’inspection des étiquettes 2017 | Vision Tec | 2015 Système de rejet | BBULL

Overview This self-adhesive labelling machine was manufactured in 2000 by Germany KRONES. The Autocol 1200-20 TA is designed for the application of self-adhesive labels on bottles. The machine is configured with three labelling stations (front, back, and neck/seal label) and includes a Taxomat label feed system. It is suitable for standard beverage packaging applications and is equipped with an integrated Checkmat inspection system for quality control. The machine is currently still installed and will be available from February 2027. The unit is described as used and maintained based on operational requirements. Technical data Capacity: up to approx. 15,000 bph Formats: 0.5 L – 1.0 L (15 formats) Application: Self-adhesive labelling of bottles Configuration: 3 labelling stations (front / back / neck/seal) Label positions: Front, back, neck/seal Incl. Inspection syst ...

Overview  This fully automatic packaging system for jars was built by Buhmann pac solutions System GmbH in 2016 and has been used very little, with only approx. 5,000 operating hours (of which approx. 2,000 hours were in pure production operation). The line includes a carton erector (wrap-around trays) and a packing unit and, in addition to packaging single-type cartons, also offers the option of automatically mixing offline products (mixed cartons). The system was regularly maintained by Buhmann & Yaskawa, with around €200,000 invested in maintenance and servicing between 2020 and 2024. The system is in very good condition and is available immediately. Technical details  Performance Product infeed online: max. 280 jars/min Format 3: max. 220 jars/min Mix type A: max. 140 jars/min (11.5 cartons/min) Mix type B: max. 140 jars/min (11.5 cartons/min) Total output: max. 350 jars/min or 3 ...

Overview  The ALWID-KRONE-HV is a semi-automatic filling machine working with high vacuum. This model is suitable for filling still media into dimensionally stable containers. Many bottle shapes and sizes can be used, no format parts required. The filling level is set directly on the valve, so it remains constant regardless of the bottle volume. Vacuum level adjustable. Technical data  Filling points: 2 Filling valve diameter:  mm Suitable for filling highly viscous media Fields of application: food, beverage, pharmaceutical and chemical industry

Overview  The crate washer was manufactured in 2000 by the German company Bohrer. It is located at a German brewery and was part of a plant that has been shut down as it was replaced by a completely new line. In autumn 2024 the line was stopped and the machine was dismantled and stored.  Technical Details  Capacity: up to 2,000 crates/hour (can be adjusted from 500 - 2,500 crates/hour) Formats: crate of 12 bottles 700ml 356 x 275 x 346 travel direction crosswise crate of 20 bottles 250ml 360 x 275 x 255 travel direction crosswise crate of 20 bottles 500ml 400 x 300 x 290 travel direction crosswise crate of 20 bottles 500ml 400 x 333 x 260 travel direction crosswise Horizontal and vertical spray nozzles Spraying with hot caustic and fresh water Caustic heater with temperature regulation is integrated in the machine Machine is heated by steam Dimensions: Length: 4800mm Width: 900mm Heig ...

A complete filling line with a 12-position gravity and vacuum filler with integrated twist-off capper for the food industry is available. Filling stations: 12, design: rotary machine, liquid viscosity: thin-medium, filling capacity: approx. 2000bottles/h, capping capacity: approx. 1000-1200/h, containers: heat-insulated, container volume: 35l/50l. This is a complete filling line including conveyor belts, accumulation table, sensors, rotary tables, pumps and format parts. The system was taken out of operation in 2024. Documentation available. An on-site inspection is possible.

Overview This Gravity Filler for Cans was manufactured in 2022 by Italian company Emma. The machine has never been used and is immediately available. It is designed for small-scale can filling, particularly suited for 15 cl and 25 cl slim cans, with manual loading and a production speed of up to approx. 600 cans per hour. Technical data Capacity: approx. 600 cans/h Formats: 15 cl slim, 25 cl slim Dimensions: L.1480 mm x W.850 mm x H.1800 mm (max. 3000 mm) Weight: 350 kg Power: 0.8 kW Air consumption: 190 Nl/min Operating pressure: 6 bar, dry and non-lubricated air Voltage: 220 V (Single-phase) Frequency: 50 Hz Auxiliary voltage: 24 V DC Ambient temperature: 2 °C to 40 °C

Overview  This complete filling line was designed for NRW and Euro bottles as well as crates and pallets and offers an output of up to 7,500 bottles per hour. The machines are from different years of construction between 1992 and 2022 and have few operating hours. The line is still in operation until the end of May and can be viewed in person. Technical details Output: Up to 7,500 bottles/hour Bottle formats processed: 0.33L & 0.5L (NRW, Euro, Ale) Crate formats processed: NRW and Euro crates Scope of delivery Palletizer | Flema | Star C-LC | 1996 (500 crates/h) Unpacker | RICO | UNO 1-head 124 | 2010 (350 crates/h) Decapper/decapper | ADELSKI | PPE 2005 | 1995 (2,000-12,500 bph, 8,500 operating hours) Bottle washer | PAC | CB 14-0.5l-R-7 LII Compact | 1998 (7,500 bph, 14,175 operating hours) Bottle inspector | SYSCONA | LC 10 FD | 2007 (caustic control & metal detection) Filler | ICS | ...