rectifieuses machines d'occasion à vendre (2,177)

grinding length: 800 mmgrinding width: 400 mmworkpiece height: 375 mmControl: Siemens 840 D total power requirement: 18 kWweight of the machine ca.: 2,6 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 10-300 mmgrinding length: 650 mmcentre height: 175 mmControl: total power requirement: 12 kWweight of the machine ca.: 3,7 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

internal diameter: max. 600 mmgrinding depth: max. 800 mmgrinding length: max. 600 mmcontrol: Siemens 840 D grinding diameter - internal: max. 600 mmgrinding diameter - cylindrical: max. 800 mmworkpiece length - max.: 380 mmexternal grinding length max.: 600 mmtravel - x1 axis: 150 mmtravel - z1 axis: 1100 mmtravel - x2 axis: 470 mmtravel - z2 axis: 800 mmworkpiece spindle: 8,5 kWturning speed range - stepless: 1-795 U/minEquipment / Accessories: Workpiece spindle unit (U/B1/L adjustment): - Travel (U-axis): 300 mm - Swivel angle (B1 axis): -0,5°/+12° - Drive power of the workpiece spindle: 8.5 kW - Speed range (infinitely variable): 1-795 rpm - Set-up speed (jogging): 10 rpm - Spindle head size A 8 according to DIN 55026 - Through-hole 58.5 mm - Workpiece diameter max. 830 mm - Workpiece length (overhung clamping) max. 800 mm - Workpiece length (clamped between centers) max. 800 mm -  ...

Meuleuse à double banc AEG 400 V.

Suitable for automatic grinding of tooth faces, tooth backs, and bases on carbide-tipped circular saw blades in a single setup. All common tooth geometries (flat, alternate, trapezoidal, etc.) can be ground automatically and in a single pass. Accessories: Full enclosure Measuring probe Grinding device with oil cooling Automatic fire extinguishing system Grinding mist extraction system N 183 Alphanumeric keypad Oil drip tray Machine light, saw diameter: 80-840 mm, Bore diameter: from 10 mm, sheet thickness: < 8 mm, Tooth pitch: 6 - 120 mm, Cutting length:

Suitable for automatic grinding of tooth faces, tooth backs, and bases on carbide-tipped circular saw blades in a single setup. All common tooth geometries (flat, alternate, trapezoidal, etc.) can be ground automatically and in a single pass. Accessories: Full enclosure Measuring probe Grinding device with oil cooling Automatic fire extinguishing system Grinding mist extraction system N 183 Alphanumeric keypad Oil drip tray Machine light, saw diameter: 80-840 mm, Bore diameter: from 10 mm, sheet thickness: < 8 mm, Tooth pitch: 6 - 120 mm, Cutting length:

Abrasive bodies, ceramic abrasive bodies, polishing bodies for rotary vibrators, vibratory finishing systems, vibratory finishing rotary vibrators, trowal systems, continuous vibrators -Manufacturer: Rösler, ceramic grinding wheel type RS 40/40 2 bags -Content: 25 kg/bag -Price/delivery: complete -Transport dimension.: 400/380/H400 mm -Total weight: 50 kg

Numérique Diamètre de meulage 250 mm Longueur de meulage 650 mm Accessoires

Longueur de meulage 500 mm Largeur de meulage 230 mm Dimensions de la table 760 x 200 mm Livraison automatique Disque magnétique Système de filtration

diamètre max. de la meule : 200 mmLargeur de la meule : 32 mm Diamètre du trou de la meule : 51 mm Plage de vitesse de tournage : 2900 U/minpuissance totale requise : 0,9 kWLes données de cette annonce ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.

Diamètre de la meule : 150 mmNO. Nombre de postes de travail : 2 vitesses de tournage : 2800 U/minPuissance totale requise : 0,55 kW- Diamètre de la meule 150 mm- Diamètre de la meule 125 mmLes données de cette annonce ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.

max. grinding diameter: - mmgrinding length: - mmworkpiece length: - mmtotal power requirement: 1,5 kWweight of the machine ca.: 1 tdimensions of the machine ca.: 1,3 x 1,1 x 2 mMovie:https://www.youtube.com/watch?v=rWhWg4H_tosNo. 5042Universal tool and steel grinding machine SIMON VSR 32-fold digital display + opticsDrive: 1.1 kW2-station pendulum table grinding / measuringCross slide 1 with Z1 + Y 1Cross slide 2, rotatable, with Z2 + Y2Height-adjustable grinding headstockSpace requirement approx. 1.3 x 1.1 x 2 mWeight approx. 500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diamètre de la lame de scie : - mm pièce - têtede broche moteur : 0,18 kWDiamètre de la meule : ? mmpuissance totale requise : 0,18 kWpoids de la machine env. : 200 kgdimensions de la machine env. : 0,8 0,5 1,6 m

grinding diameter: 300 mmgrinding length: 1000 mmcentre height: 150 mmtotal power requirement: 6 kWweight of the machine ca.: 5 tdimensions of the machine ca.: 5 x 3 x 2,2 mNo. 4959Universal cylindrical grinding machineSTÖCKEL RSU 100 NC-TWorking area: approx. Ø 300 x 1000Drive: 4/1 kWElectronic handwheelInternal grinding deviceCoolant device with magnetic separatordocumentationExternal grinding spindleWheel Ø 400 x 50 / 250 x 30 mm4 kW / max. 1400 mi-1Internal grinding spindle 1 kW / max. 1400 min-1Swivel range: - Table : -6° / +10° - Grinding headstock 180° - Workpiece headstock -90°Space requirement approx. 5 x 3 x 2.2 mTransport dimensions approx. 6LMWeight approx. 5.000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mmband length: 2280 mmband speed: 22 m/sectable-size: 700 x 350 mmroll diameter: 140 / 80 mmmotor speeds:: 2880 1/minrange L-W-H: 1300 x 800 x 1500 mmtotal power requirement: 3,0 kWweight of the machine ca.: 250 kgHorizontal belt grinder- Small, flexible all-rounder- Solid gray cast iron unit - long-lasting, good grinding results- Motorized tape oscillation approx. 10mm- Pneumatic belt tension- Small table on the pulley for grinding radii and shapes- The entire sanding belt can be used thanks to the height-adjustable work table- Including angle and miter fenceSpecial equipment:- swiveling grinding unit 90 - 135 degrees- Support table on the pulley The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Longueur de meulage : 400 mmLargeur de meulage : 250 mmHauteur de la pièce : 300 mmPuissance totale requise : ? kWPoids de la machine env. : 2 tDimensions de la machine env. : 222 m

grinding length: 5200 mmgrinding width: 1300 mmworkpiece height: 320 mmControl: Siemens 840 D main drive: 306 kWtotal power requirement: 380 kWweight of the machine ca.: tdimensions of the machine ca.: 11,21 x 3,2 x 3,85 mCNC production surface grinding machine with segment headGrinding length 5200 mmGrinding width 1300 mmWorkpiece height 320 mmControl Siemens 840 DPassage width 1300 mmGrinding height 320 mmGrinding motor 306 kWGrinding motor speeds up to 320 rpmGrinding motor feed, infinitely variable 0.5-35 m/minGrinding motor infeed in steps of 0.002-1 mmGrinding motor infeed continuously stepless upto 5 mm/minSpace requirement approx. 11.21 x 3.2 x 3.85 mIncluding accessories.- Coolant system- Magnetic clamping device- Switch cabinet- Oil mist extraction- DocumentationDimensions (length x width x height):Bed: 11200 x 2400 x 1600 mm, weight 28000 kgGrinding head: 3000 x 2500 x 3100 m ...

High-performance grinding spindle, internal grinding machine, internal grinding device, internal grinding spindle-Grinding spindle: for lathe-Electrically operated-Max. Speed: 6900 rpm-Admission: M42 x 1.5 mm-Dimensions: 600/390/H355 mm-Weight: 64 kg

electric magnetic plate, chuck, magnetic chuck, magnetic chuck-Clamping surface: 1000 x 255 mm-Connection: 100 volts DC-Dimensions: 1000/255/H98 mm-Weight: 140 kg

Pendulum grinder, vertical grinder, swivel arm vertical grinder, surface grinder, grinder, l, surface grinder, magnetic grinder, surface grinder-vertical, cup grinder-Manufacturer:Lomefa, cup grinder-Grinding height: max. 235 mm-Grinding wheel: Ø 200 mm-Work table: 285 x 200 mm-Drive: 1.1 kW-Accessories: including grinding wheels, see photo-Total dimensions: 1160/650/H880 mm-Total weight: 208 kg

Cylindrical grinding machine, external cylindrical grinding machine, internal cylindrical grinding machine, center grinding machine, center grinding machine -Max. Shaft Diameter: 320mm -Max. Grinding length: 345 mm - Chuck size: Ø 133 mm -Dimensions: 1925/1135/H1755 mm -Weight: 1592 kg -function tested

Abrasive bodies, ceramic abrasive bodies, polishing bodies for rotary vibrators, vibratory finishing systems, vibratory finishing rotary vibrators, trowal systems, continuous vibrators -Condition: used -Manufacturer: Rösler, ceramic grinders 40/45/45 mm 1 box -Content: 71 kg -Price/delivery: complete -Transport dimension.: 600/400/H220 mm -Total weight: 72 kg

Double bench grinder, bench grinder, column grinder, column grinder-Manufacturer: Cordia, double bench grinder type DOTN-150-Grinding wheel: max. Ø 150 x 25 x 20 mm-Motor power: 0.35 kW-Speed: 3000 rpm-Operating voltage: 380 volts-Dimensions: 410/200 / H1045 mm-Weight: 33 kg

Cylindrical grinding machine, external cylindrical grinding machine, internal cylindrical grinding machine, centering grinding machine, center grinding machine-Precision universal cylindrical grinding machine-Max. Shaft diameter: 203 mm-Max. Grinding length: 490 mm-Collet: Ø 32 x 87 mm-Grinding wheels diameter: 160 mm-Dimensions: 1660/1500/H1500 mm-Weight: 1802 kg

Surface grinding machine, grinding machine, surface grinding machine-horizontal, surface grinding machine-Manufacturer: Finke, horizontal surface grinding machine with magnetic plate-Magnetic plate: 550 x 200 mm-Traverse paths: x 500 mm / y 260 mm / z 260 mm-Drive: 1.5 kW-Grinding wheel: Ø max. 200 mm-Dust extraction device-Transport dimensions: 1950/1300/H1590 mm-Total weight: 1108 kg

Bench grinder, bench grinder, pedestal grinder, pedestal grinder-Manufacturer: Rema, double bench grinder type DSO4/150-Grinding discs: max. Ø 150/25/51 mm-Motor power: 0.3 kW-Speed: 2900 rpm-Operating voltage: 380 volts-Dimensions: 380/240/H270 mm-Weight: 14 kg

Support grinding device, support grinder, support grinding device, circular grinding device, bench grinder, grinding machine, stand grinder, stand grinder, combination bench grinder -Grinding device -Voltage: 380V -Drive: 1.6/1.15 kW -Speed: 2800/1400 rpm -Dimensions: 390/223/H240 mm -Weight: 20kg

Tool grinding machine, grinding machine, angle grinder, turning steel grinding machine, steel grinding machine-Transfer in current condition as seen-Machine must: be overhauled electrically (FI circuit breaker trips)-Grinding points: 4-Angled tables on vibrating tables: 3-Vice for chip breaker groove: 1-Max. Steel cross section: mm-Number: 1x grinding machines available-Price: per piece-Dimensions: 1500/1500/H1400 mm-Weight: 1004 kg

: Reishauer DS / zum läppen weight of the machine ca.: 200 kg: Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double bench grinder, bench grinder, column grinder, column grinder, Cut-off machine, polishing machine, polishing stand-Motor power: 0.45 kW-Speed: 2,800 rpm-Max. Grinding wheels: Ø 150 x 20 x Ø 32 mm-Operating voltage: 400 volts-Dimensions: 650/700/H1500 mm-Weight: 198 kg