machines de boissons machines d'occasion à vendre (2,008)

Titre additionnel : avec carbonisation, volume du réservoir : 500 l, pression de fonctionnement du réservoir : 1 à -0,15 bar, température de fonctionnement du récipient : 130 °C, caractéristiques : débitmètre (E+H), cuve de mélange avec unité de brassage (5 hl), panneau de contrôle avec boutons-poussoirs, carbonisation avec section de calme ultérieure, pas de réservoirs de pression, pas de panneau

Remorque-citerne - semi-remorque avec réservoir de bière lumineux pour le transport de la bière ; l’année de construction de la remorque est 2012. Titre additionnel : Réservoir de pression horizontal en acier inoxydable sur une remorque mobile, Volume : 25250 litres, Pression de fonctionnement : 3 bars, Volume systémique : 25250 litres, Matériau : Acier inoxydable, Position : posée sur un semi-remorque

The dealcoholisation is carried out by a dialysis membrane module consisting of up to 8 modules connected in parallel. The mass transfer is driven by the concentration gradient between beer and dialysate (water or dealcoholised beer)., Additional title: dialysis, Capacity: 350 l/h remaining alcohol content: approx. 0,45 %; original alcohol content: approx. 5 %, Length: 3,6 m, Width: 1,7 m, Height: ca. 8,4 m, Weight: 900 kg, Operation / Control: Control cabinet with operating buttons and touch display, Features: 6 membrane modules, column DN400; plate heat exchanger TS6-MFG, Alfa Laval, year of manufacture 2006

Cylindroconical fermentation and storage tank - Ammonia or glycol cooled, 1 x cone cooling, 3 x frame cooling. - Swivelling cone - Stainless steel - insulated - Standing frame, short - Cleaning air fitting with safety valve - Vacuum valve, Additional title: Refrigerated stainless steel pressure tank for outdoor installation, Capacity: 96450 l, Operating pressure: 2 bar, Length: approx. 12400 mm, Width: approx. 3950 mm, Height: approx. 3950 mm, Weight: 6220 kg, Material: Stainless steel 1.4301, Position: vertical, Base construction: short supporting skirt, Features: Cooling: 1 x cone cooling jacket, 3 x side wall cooling jacket; swivel cone; insulation; dearation and cleaning combination with safety valve; vacuum valve; temperature measurement

Universal compact dust extraction system with compressed air cleaning. The sound-insulated hood ensures quiet operation whilst protecting the suction unit from contamination. Motor housing with integrated tank or shaft cleaning unit, direct-drive fan with three-phase motor, aluminium turbine impeller, pressure gauge with pressure reducer and quick-connect nipple for connecting the compressed air supply. Control box with motor protection switch or automatic control for fully automatic compressed air cleaning during operation. Filter housing made of galvanised, powder-coated sheet steel with replaceable filter cartridges and built-in pre-separator including baffle plate. A bucket frame with a release mechanism is provided for waste disposal., Additional title: for kieselguhr dust, Capacity: 1800000 l/h, Filtration area: 15 m2, Power: 3 kW, Current: 6,3 A, Voltage: 400 V, Frequency: 50 Hz,  ...

Flotation tank. - Designed for cooling with ammonia (can also be cooled with glycol), 1 x frame cooling. - Stainless steel - insulated - Stand frame, short -Cleaning air fitting with vacuum valve and safety valve, Additional title: Insulated stainless steel pressure tank for outdoor installation with a cooling , Capacity: 43100 l, Operating pressure: 4 bar, Material: Stainless steel 1.4301, Position: vertical, Base construction: short supporting skirt, Features: Cooling: 1 x side wall cooling jacket; swivel opening with outlet; sampling valve; insulation; dearation and cleaning combination with 2 safety valves; temperature measurement; volume measuerment

Pressurised tank cellar with 4 upright 324 hl stainless steel pressure tanks and with double-seat valve solution on the operating level. The tanks are cooled using ice water., Additional title: coolable stainless steel pressure tanks, Volume per tank: 32400 l, Cooling surface/tank: 25 m², Perm. working overpressure: 3 bar, Systemic volume: 324 hl, Length: 2,5 m, Width: 2,5 m, Height: 7,4 m, Weight: 2585 kg, Material: stainless steel AISI 304, Features: Tank cleaning equipment with spray head, safety valve, pressure gauge, air valve combination; sampler, level indicator with valves, outlet valve , Periphery: Inlet and outlet pipework via double-seat valves

Water treatment system consisting of: cation exchanger, reverse osmosis system, and pressure booster station, Additional title: Reverse osmosis system with cation exchanger and pressure booster station, Permeate capacity: 1100 l/h, Max. permissible pressure: 6 bar, Yield: 75 %, Salt retention: 98 %, Power: HD-pump 1,5 kW, 3,15 A, Frequency: 50 Hz, Length: approx. 2294 mm, Width: approx. 740 mm, Height: approx. 1220 mm, Weight: 200 kg, Features: Conductivity meter, fine filter, overpressure protection, high pressure pump, control unit, pressure booster station 2 salt dissolving and storage containers, 2 filter containers with nozzle rod and lower nozzle, central control valve with upper nozzle, control unit

6 horizontal stainless steel tanks with dished bottoms, side cooling zone, manhole, sampling tap and central outlet. The purchase of a partial quantity is possible., Additional title: stainless steel tanks with temperature control, Total capacity: 242900 l, Max. pressure 4 Tanks: 0,9 bar, Max. pressure 2 Tanks: 5 bar, Material: stainless steel, Position: vertical, Base construction: cylindrical tank with dished bottoms, placed on 4 square tube feet, Features: 4 storage tanks (approx. 445 hl), 2 pressure tanks (approx. 320 hl), shell manhole, 1 shell cooling zone, insulated with steel metal cladding , Periphery: own temperature control

- Vertical fermentation tank with a capacity of 152.60 hl. Insulated, clad and equipped with overflow spout, jacket cooling zone and sampling tap. - Vertical fermentation tank with a capacity of 161.27 hl. Equipped with overflow spout, jacket cooling zone, yeast plug, spray head and lighting fixture. - Horizontal pressure tank with a capacity of 155.00 hl and a pressure capacity of 4.4 bar. Insulated and equipped with cooling zone, thermometer, safety valve, pressure gauge, sampling tap, hose level indicator and 2 spray heads. - Mobile yeast tank with a capacity of 8.00 hl and jacket cooling. - Temperature control., Additional title: stainless steel tanks for wheat beer fermentation, Total capacity (gross): 46500 l, Features: 2 vertical tanks (1 x ca. 150 hl, 1 x ca. 160 hl), 1 horizontal tank (155 hl), 1 mobile yeast tube, own temperature control

Homogénéiseur à un seul étage, utilisé pour les suspensions en houblon avec une taille de particule de 1 μm. L’intégration dans un système de contrôle de niveau supérieur est possible via un échange de signaux. Le moteur était contrôlé via un FI externe, Titre additionnel : homogénéisation haute pression, Plage de capacité approximative : 1800 l/h, Pression : 250 bar, Taille des particules cellulaires : 1 μm particule cellulaire, Longueur : environ 2,2 m, Largeur : environ 2,5 m, Hauteur : environ 1,9 m, Fonctionnement / Contrôle : Intégré dans un contrôle de procédé ProLeit, le moteur était contrôlé par un convertisseur de fréquence externe. Fonctionnalités : CIP, SIP

Yeast cultivation with dampable wort sterilization tank designed for an operating pressure of 2 bar and a capacity of 2.47 hl, a second heatable and coolable wort sterilization tank designed for an operating pressure of 2 bar with a capacity of 12.7 hl, and a yeast propagation tank with a capacity of 55 hl, permissible operating pressure of 2 bar and jacket cooling in the lower third (without cone). All tanks are equipped with an agitator. Also includes a CIP tank. The plant is controlled via a Steinecker control cabinet (time-controlled). The tanks are also available individually, Additional title: with switch cabinet and CIP tank, Features: 2 tanks for wort sterilization with stirring unit (approx. 2,4 hl and approx. 12,7 hl), control cabinet, 1 cylindro-conical tank with stirrig unit, CIP system

This vertical plate heat exchanger from GEA Ahlborn is designed for efficient temperature exchange between two liquids. It is made of stainless steel and is designed for a permissible pressure of 16 bar and a permissible temperature of 100 °C, making it suitable for a wide range of industrial and brewing applications. The unit has a robust base construction with supports that ensure stability during operation. With dimensions of 1.55 m (L) × 0.45 m (W) × 1.50 m (H) and a weight of 1,500 kg, it offers a compact yet robust solution for heat transfer needs. Our team at VBW Asset Trade will be happy to answer your questions., Permissible pressure: 16 bar , Permissible temperature: 100 °C, Length: 1,55 m, Width: 0,45 m, Height: 1,50 m, Weight: 1500 kg, Material: stainless steel, Position: vertical, Base construction: mainstays

This beer drive delivery station is designed for efficient liquid transfer in breweries and beverage factories. The device is mounted on a frame with integrated forklift pockets to ensure easy mobility and handling. It features a pump, an inductive flow meter, a control cabinet with a totalizer and two toggle switches, and a 20 m long DN40 hose (hose replacement recommended) with a hose reel. Other features include a pneumatically controlled flap valve, a compressed air connection, and three manual flap valve connections, making it a versatile and practical solution for controlled beverage dispensing. Our team at VBW Asset Trade will be happy to answer your questions., Hose: 20 m DN40, Length: 2,2 m, Width: 1,2 m, Height: 1,62 m, Base construction: mounted on rack with forklift shoes integrated, Features: pump, inductive flow meter, control cabinet with summation counter and two flip sw ...

The Filtrox Cross Flow microfilter works with a permissible transmembrane pressure of 6 bar (0 °C - 95 °C) and a filtrate volume of 4.5 - 7 hl/h with a filter surface area of 26.4 m². Two pumps (20 kW) in the unfiltrate circuit transport the medium to be filtered. With 16 hl agitator tank as cleaning tank., Additional title: membrane filtration plant for yeast-beer recovery 1987-1991, Capacity: 7 hl/h, Tol. operating pressure: 10 bar, Tol. operating temperature: 85 °C, Max. filter area: 26 m^2, Current: 4,85/2,8 A, Voltage: 220/380 V, Frequency: 50 Hz, Operation / Control: Simatic S5, Features: 8 ceramic membrane modules (total filtration area 26.4 m2); high-pressure pump; 16 hl cleaning tank with agitator; various pipes, valves, measurement and control technology

This PARAMIX system is used to produce high- and low-carbonated beverages. The process comprises the following steps: 1. Degassing of the water, 2. Dosing and mixing of water and syrup, 3. Carbonation of the finished mixture. The system was retrofitted by FAMIX in 2009 and expanded to include the following components: - CO₂ impregnation unit - CO₂ pressure-temperature ratio regulator type BMS7 The regulator, including the control cabinet, is to be completely renewed again when the device is purchased. The system is ideal for the reliable and flexible production of a wide variety of soft drinks. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call!, Additional title: mixing unit 1983 - 2010, Capacity approx.: 15000 l/h Mixing and carbonating, Length: 2,9 m, Width: 2,5 m, Height: 2,5 m, Weight: 3000 kg, Operation / Control: mi ...

This flash pasteurization system is used to stabilize beverage quality through gentle pasteurization. The product is heated to pasteurization temperature via a plate heat exchanger for a defined period of time and then cooled in a controlled manner. The system consists of: - Tube heat exchanger with hot water buffer tank for supplying hot water -Plate heat exchanger for flash pasteurization of the product This combination ensures reliable, uniform heating to guarantee long-term product quality. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call!, Additional title: In-line pasteurisation plant for beer, built between 1987 and 1999, Capacity: 35000 l/h, Operation / Control: Excluding control cabinet with software. Software can be delivered by agreement, Features: 1 x plate heat exchanger, 1 x tube heat exchanger, 1 x hot water pu ...

Convoyeur de grain usé humide - Logement avec goulotte d’entrée rectangulaire - Bunker à grain usé humide monté à l’entrée - Connexion de sortie d’eau de rinçage - Moteur d’engrenage monté - Volet anti-retour avec connexion à air, manomètre et trappe d’accès à bille., Titre additionnel : Convoyeur de grain usé humide, Capacité approximative : 200 kg/min, Puissance : 4 kW, Courant : 6,98 A, Tension : 400 V, Fréquence : 50 Hz, Matériau : Acier inoxydable 1.4301, Caractéristiques : Souche à grains usés ; soupape anti-retour avec connexion à air comprimé, manomètre et trappe d’accès à billes

Réservoir de flottaison. - Conçu pour refroidir à l’ammoniaque (peut aussi être refroidi au glycol), refroidissement 1 x châssis. - Acier inoxydable - Isolé et revêtu - Châssis de support, court - Raccord d’air de nettoyage avec soupape de sécurité, Titre additionnel : Réservoirs en acier inoxydable réfrigérés pour installation extérieure, Capacité : 74480 l, Pression de fonctionnement : 0,9 bar, Largeur : 12,55 m, Hauteur : 3,27 m, Matériau : Acier inoxydable, Position : verticale, Construction de la base : jupe de support courte, Caractéristiques : Refroidissement : 1 x gaine de refroidissement latérale ; isolation ; combinaison de décharge et de nettoyage avec soupape de sécurité ; Mesure de la température

buse à deux composants avec viseur pour une capacité de refroidissement du moût d’environ 130 hl/h entièrement assemblée sur panneau en acier inoxydable, Titre additionnel : Buse à double fluide pour oxygénation du moût, Aération à une capacité de refroidissement du moût : 13000 l/h, Construction de base : montée sur panneau en acier inoxydable, Caractéristiques : ventilation DN50, filtre à air stérile, débitmètre d’air, réducteur de pression, Valves à membrane, cabine de contrôle

Manual operating biological lactic acid plant with 3 tanks in stainless steel as storage and dosing tanks, with all fittings, Additional title: 3-tank system with heating elements, aeration devices and temperature control, Volume and dimension per tank: 2000 l Diameter 1300 mm, cylindrical height 1500 mm, total height 2100 mm, Length: 4500 mm, Width: 1700 mm, Height: 2100 mm, Operation / Control: electrical box with buttons, switches and temperature controls, Material: stainless steel, Position: free standing, Base construction: standing tanks with lids, on pipe feet, Features: electric heating rods, temperature sensor, stand hose for content display, automatic gassing, ladder bracket, internal piping, control box

Unité de contrôle pour vérifier que les caisses de bière sont complètes. Vérifie également les bouchons des bouteilles, y compris un arrêt de convoyeur en cas de problème. Titre additionnel : avec détection de bouchons, Courant : 4 A, Tension : 230 V, Fréquence : 50/60 Hz, Air comprimé : min. 6 - max. 10 bar, Longueur : 0,7 m, Largeur : 0,74 m, Hauteur : 2,1 m, Direction de marche : transversale, Caractéristiques : inspection plutôt que détection de fermeture, avec butée intégrée

Chaudière à moût externe pour brasserie capacité de 130 hL ; Titre additionnel : échangeur de chaleur à tubes et coques, Coque/tube sous pression : 2 bars, Coque/tube Volumke : 200 l, Matériau : acier inoxydable 1.4541 (AISI 321), Construction de base : échangeur de chaleur à tubes et coques verticaux avec compensateur et support, Caractéristiques : Accessoires à vapeur et condensats ; Valvel de sécurité

Système complet d’évaporation sous vide de type SchoKo, avec : - Évaporateur à expansion/réservoir à vide - condensateur à vapeur - pompes et raccords différents, Titre supplémentaire : système d’évaporation sous vide, Capacité de dépression : 13000 l, Volume du réservoir à vide : 1471 l, Longueur : 2006 mm, Largeur : 2006 mm, Hauteur : 2503 mm

Réservoir en acier inoxydable isolé et revêtu avec un dôme conique plat. Plus récemment utilisé comme réservoir de stockage pour l’eau froide. Titre supplémentaire : Réservoir vertical isolé en acier inoxydable, Volume : 22257 l, Température : 20 °C, Largeur : 2,1 m, Hauteur : 9 m, Poids : 3000 kg, Construction de base : isolée et couverte, Caractéristiques : bouche d’égout

A stainless steel pressure tank housed in a shipping container, fitted with various equipment for dispensing drinks., Additional title: Stainless steel pressure tank housed in a shipping container, Capacity: 3200 l, Operating pressure: 2,5 bar, Operating temperature: 20 °C, Length: 4,65 m, Width: 2,3 m, Height: 1,95 m, Weight: 2500 kg, Features: Beer pump, thermometer, gas measurement, flow meter (Diessel), 2 cable drums, hose reel, safety valve, cleaning and filling connection, spray head, manometer, empty detection electrode Control cabinet, compressed air compressor (AltasCopco), pallet for 4 CO2 bottles, valves, pressure reducer

Réservoir vertical en acier inoxydable avec divers raccords. Titre additionnel : réservoir vertical, Volume : 3158 l, Pression maximale autorisée : 0,5 bar, Température maximale autorisée : 110 °C, Matériau : acier inoxydable, Position : verticale, Construction de base : réservoir cylindrique à têtes plates

Réservoir de transport de bière dans un conteneur maritime, avec tête de pulvérisation CIP et bouche d’égout. Comprend un système de dosage (débit maximal : 120 l/min). Titre additionnel : Réservoir de pression en acier inoxydable logé dans un conteneur, Capacité : 7200 l, Pression de fonctionnement : 2,5 bar, Température de fonctionnement : 20 °C, Longueur : 7,25 m, Largeur : 2,4 m, Hauteur : 2 m, Caractéristiques : contrôle, pompe, enrouir de tuyau, débitmètre, tambour de câble, raccords, tête de pulvérisation CIP, bouche d’égout

Réservoir horizontal en acier inoxydable, utilisé récemment comme réservoir de flottaison de bière. Titre additionnel : réservoir horizontal en acier inoxydable, Volume : 42300 l, Pression de fonctionnement : 0,99 bar, Température de fonctionnement : 20 °C, Matériau : acier inoxydable, Position : horizontale, Caractéristiques : bouche d’égout

Plant for kilning green malt. Hot air is generated at a steam-heated heat exchanger and passed through the kiln by means of a fan. It is possible to regulate the proportions of fresh and circulating air by means of flaps and a bypass. Control takes place by means of a control cabinet., Additional title: vertical vessel; year of manufacture approx. 2005, Kiln dry capacity: 200 Kg, Width: 1,1 m, Height: 3,2 m, Features: Ventilator (Pollrich Ventilatoren GmbH, 2004), air-shut-off valves (EBRO Armaturen GmbH), circular vessel with Optima strauber-sieve bottom (Steinhaus GmbH), insulated hot water vessel Control cabinet